How it Works
LG
Loading...
M5201CCBA
User Manual
50 pgs5.94 Mb0
Table of contents
Loading...

LG M5201CCBA, M5201C User Manual

User’s Guide

M5201C
Make sure to read the
Keep the User's Guide(CD) in an accessible place for future reference.
Safety Precautions
before using the product.
See the label attached on the product and give the information to your dealer when you ask
for service.

Using the Remote Control

Name of the Remote Control Buttons

•
AV Button
•
When watching AV/S-Video/RGB/HDMI
/
Component1/ Component2
The product will be automatically turned
off after a certain period of time.
Press this button repetitively to
select an appropriate time duration
- Automatically adjusts the image.
Press this button repetitively to set
Sleep Button
PSM Button
•
the intended screen.
1 2 3
4 5 6
7 8
•
Power On/Off Button
•
Input Select Button
(See next page)
•
ARC button
To select the image size of the screen.
Auto Button
•
Automatic adjustment function (Operational for the analog signal only)
There is not a function which is supported
9
There is not a function
which is supported
•
Menu Button
•
UP and Down buttons
Bring up and down direction
adjustment.
Mute button
•
0
There is not a function which is supported
•
Exit Button
•
Volume Button
•
Check Button
*
There is not a function which is supported
1
Using the Remote Control
1 2 3
4 5 6
7 8
0
9
*
•
AV Button
Each time you press the Input button it will change to
AV Component1 Component2 RGB HDMI/DVI
•
Input Select Button
If you press the button once, the following Input Signal Window will appear. Select the signal type you want using the button.
Input

Inserting batteries into remote control.

1. Take out the battery cap.
2. Insert the batteries with correct polarity (+/-).
3. Close the battery cap.
• Dispose of used batteries in the recycle bin to prevent environmental pollution.
2

Name and Function of the Parts

OUT
IN
VIDEO
L-AUDIO-R
VIDEO
YP
B
P
R
RGB IN
RGB OUT
HDMI/DVI IN
L-AUDIO-R
COMPONENT IN
AV OUT
AV IN
SPEAKER (8) (R) (L)
REMOTE CONTROL IN
RS-232C (CONTROL& SERVICE)
1
2
AUDIO (RGB/DVI)
S-VIDEO
++
--
OUT
IN
VIDEO
L-AUDIO-R
VIDEO
YP
B
P
R
RGB IN
RGB OUT
HDMI/DVI IN
L-AUDIO-R
COMPONENT IN
AV
OUT
AV IN
SPEAKER
(8)
(R) (L)
REMOTE
CONTROL IN
RS-232C (CONTROL&
SERVICE)
1
2
AUDIO (RGB/DVI)
S-VIDEO
++
--
* The product image in the user’s guide could be different from the actual image.

Rear View

Power Connector : Connect the power cord
Wired Remote Control Port
RS-232C Serial Ports
RGB, HDMI/DVI Ports
PC Sound Jack : Connect the audio cable to the *LINE OUT jack of the PC sound card.
AV Ports
Speaker Ports
*LINE OUT
A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that the connecting terminal of the PC sound card is checked before connecting. If the Audio Out of PC sound card has only Speaker Out, reduce the PC volume.
If the Audio Out of the PC sound card supports both Speaker Out and Line Out, convert to Line Out using the card jumper of the program (Refer to the Sound Card Manual).
3
OUT
IN
VIDEO
L-AUDIO-R
VIDEO
YP
B
P
R
RGB IN
RGB OUT
HDMI/DVI IN
L-AUDIO-R
COMPONENT IN
AV OUT
AV IN
SPEAKER (8) (R) (L)
REMOTE CONTROL IN
RS-232C (CONTROL&
SERVICE)
1
2
AUDIO (RGB/DVI)
S-VIDEO
++
--

Connecting to External Devices

AUDIO (RGB/DVI)

When Connecting to your PC

First of all, see if the computer, product and the peripherals are turned off. Then, connect the signal input cable.
When connecting with the D-Sub signal input cable.
A
When connecting with the HDMI to DVI signal input cable (not included).
B
A
RGB IN
Rear side of the product.
HDMI/DVI IN
B
Rear side of the product.
Connect the Audio cable.
Rear side of the product.
PC
MAC
MAC
PC/
Macintosh Adapter (not included)
Use the standard Macintosh adapter since an incompatible adapter is available in the market. (Different signaling system)
(not included)
PC
PC
Connect the power cord.
Rear side of the product.
4
INPUT SET
SOURCE
AUTO/SET
Connecting to External Devices
Turn on power by pressing the power button on the product.
1
AUTO/
ON/OFF
SET
Power button
Turn on the PC.
2
SOURCE
Select an input signal. Press the INPUT button on the remote control to select the input signal.
Or, press the SOURCE button on the bottom of the product.
Input Input
When connecting with a D-Sub signal input cable.
A
• Select RGB : 15-pin
When connecting with a
B
• Select HDMI/DVI :
D-Sub
analog signal.
HDMI to DVI
HDMI to DVI
signal input cable.
Digital signal.
Note
•
How to connect to two computers.
Connect the signal cables ( Press the INPUT button on the remote control to select the computer to use.
•
Directly connect to a grounded power outlet on the wall or a power bar with a ground
wire.
HDMI to DVI
5
and D-Sub) to each computer.
RGB IN
RGB OUT
RGB IN
RGB OUT
RGB IN
RGB OUT
RGB IN
RGB OUT
Connecting to External Devices

Watching RGB Outputs

Use this function when displaying ANALOG RGB inputs of a PC to the other product.
•
To use different products connected to each other
Connect one end of the signal input cable(15-pin D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN connector of other products.
15-pin D-Sub Signal Cable
PC
PC
Note
Product 1
Product 2
• When multi-connecting in/out cascade format, no loss cables are recommended.
Product 3
Product 4
We recommend that you should use cable distributor.
6
Connecting to External Devices
L-AUDIO-R
VIDEO
AV
OUT
AV IN
S-VIDEO
Input
INPUT SET
SOURCE
AUTO/SET
L-AUDIO-R
VIDEO
AV
OUT
AV IN
S-VIDEO

When watching VCR / DVD

Connect the video cable as shown in the below figure and then connect the power cord (See page 4).
When connecting with a BNC cable.
A
•
Connect the input terminal with a proper color match.
When connecting with a S-Video cable.
B
•
Connect to the S-Video input terminal to
watch high image quality movies.
Audio Cable
Product
S-Video Cable
(not included)
BNC Cable
(not included)
Product
Audio Cable
(not included)
VCR/DVD Receiver
(not included)
VCR/DVD Receiver
Select an input signal. Press the INPUT button on the remote control to select the input signal.
Or, press the SOURCE button on the bottom of the product.
A
B
Note
When connecting with an BNC cable.
Select AV.
•
When connecting with an S-Video cable.
•
Select AV.
• When the BNC cable is connected simultaneously with S-Video cable, S-Video input has a priority.
7
VIDEO
YP
B
P
R
L-AUDIO-R
COMPONENT IN
1
2
Input Input
INPUT SET
SOURCE
AUTO/SET
VIDEO
YP
B
P
R
L-AUDIO-R
COMPONENT IN
1
2
Connecting to External Devices

When watching HDTV/DVD(480p/576p/720p/1080p/1080i/480i/576i)

Connect the video/audio cable as shown in the below figure and then, connect the power cord (See page 4).
•
Connect the input terminal with a proper color match.
A
Select an input signal. Press the INPUT button on the remote control to select the input signal.
Or, press the SOURCE button on the bottom of the product.
BNC Cable
(not included)
Product
Audio Cable
(not included)
HDTV Receiver
B
BNC Cable
(not included)
Product
Audio Cable
(not included)
HDTV Receiver
A
B
•
Select Component 1
•
Select Component 2
8
Input Input
INPUT SET
SOURCE
AUTO/SET
Connecting to External Devices
RGB IN
RGB OUT
HDMI/DVI IN
AUDI O (RGB/DVI)
When watching
Connect the video/audio cable as shown in the below figure and then connect the power cord (See page 4).
HDMI/DVI IN
A
HDMI to DVI Signal Cable
(not included)
VCR/DVD/Set-top Box
Product
RGB IN
RGB OUT
HDMI/DVI/RGB
AUDIO
(RGB/DVI)
RCA-PC Audio Cable
from the VCR/DVD/Set-top Box
(480p/576p/720p/1080p/1080i)
Product
HDMI/DVI IN
VCR/DVD/Set-top Box
RGB IN
AUDI O (RGB/DVI)
RGB OUT
HDMI Signal Cable
(not included)
B
D-Sub Signal
Cable
VCR/DVD/Set-top Box
Product
RCA-PC Audio Cable
Select an input signal. Press the INPUT button on the remote control to select the input signal.
Or, press the SOURCE button on the bottom of the product.
A
When connecting with a When connecting with a
• Select HDMI/DVI
When connecting with a D-Sub signal input cable.
B
• Select RGB
HDMI to DVI HDMI
signal input cable.
signal input cable.
9
L-AUDIO-R
VIDEO
AV
OUT
AV IN
S-VIDEO
Connecting to External Devices
Watching
•
When you set the input signal of the main screen as 'AV (CVBS)', you can transmit the signal that
you're watching to the AV output terminal.
AV Outputs
Video/TV
BNC Cable
(not included)
Audio Cable (not included)
Product
Note
BNC Cable
(not included)
Audio Cable (not included)
Video/TV
• When multi-connecting in/out cascade format, no loss cables are recommended. We recommend that you should use cable distributor.
10
ON/OFF
AUTO/
SET
SOURCE

Selecting and Adjusting the Screen

Name of the Buttons in the Screen Adjustment Unit

Power Button
Power Indicator
MENU Button
OSD Select /
Adjust Button
SOURCE
• Press this button to turn on the power. Press this button again to
turn it off.
• This Indicator lights up green when the display operates normally(on mode). If the display is in sleep (Energy Saving) mode, this indicator color changes to amber.
• Use this button to show/hide the OSD (On Screen Display) menu screen.
• Use
this
button to select an icon or adjust the setting in the OSD screen.
• Adjust the up and down.
AUTO/
ON/OFF
SET
• Adjust the volume.
11
Input
SOURCE
AUTO/SET
Auto in progress For opimal display change resolution to 1920 X 1080
Selecting and Adjusting the Screen
Name of the Buttons in the Screen Adjustment Unit
AUTO/SET Button
SOURCE Button
IR Receiver
[For PC Analog signal]
[When Full HD Mode is active
and 1920 X1080 is selected]
• Select the input signal
AV Composite Video, Separate Video Component 1 HDTV, DVD Component 2 HDTV, DVD RGB 15-pin D-Sub analog signal HDMI/DVI Digital signal
• The unit that receives the signal from the remote control.
12
Selecting and Adjusting the Screen

OSD Menu

Icon Function Description
Adjusts screen brightness, contrast and color that you prefer.
PICTURE
SOUND
TIMER
SPECIAL
SCREEN
Adjusts the audio function.
Adjusts the timer function.
Adjusts the screen status according to the circumstances.
Adjusts the screen video.
Note
OSD(On Screen Display)
The OSD function enables you to adjust the screen status conveniently since it provides graphical presentation.
13
Selecting and Adjusting the Screen

How to adjust the OSD (On Screen Display) screen

Pops up
the menu
screen
1
2
3
4
5
6
Move where
you want to
adjust
Press the MENU Button, then the main menu of the OSD appears.
To access a control, use the Buttons.
When the icon you want becomes highlighted, press the SET Button.
Use the Buttons to adjust the item to the desired level.
Accept the changes by pressing the SET Button.
Exit the OSD by pressing the EXIT Button.
Select a
menu icon
Move where you want to
adjust
Select a
menu icon
•
Use the remote control to adjust the OSD screen.
Adjust the status

How to adjust the screen automatically

You need to adjust the screen display when connecting the product to a new computer or changing the mode. Refer to the following section to set an optimal product screen.
Press the AUTO/SET button (AUTO button in a remote Control) in the PC analog signal. Then, an optimal screen status will be selected that fits into the current mode.
If adjustment is not satisfactory, you need to adjust screen position, clock and phase in the OSD menu.
Save
adjustment
[When Full HD Mode is active
and 1920 X1080 is selected]
Exit from the
menu screen.
14
Loading...
+ 35 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use