LG M4213C-BA, M4213C User Manual

M

ake sure to read the

Safety Precautions

before using the product.

Keep the User's Guide(CD) in an accessible place for future reference.

S

ee the label attached on the product and give the information to your dealer when you ask

for service.

M4213C

User's Guide

Temporary noise is normal when powering ON or OFF this device.

1

1

- Only on some models.

Connecting the stand

1. Take the parts for the stand out of the box and assemble them as shown in the

picture.

2. Place a soft cloth on the table and put the product with the screen facing

downward. Connect the stand as shown in the following picture.

3. Use the screws to secure the stand on the rear side of the product as shown

in the diagram.

First, check if the following parts are all present.

Parts

Stand (1)

Screws (6)

Cable management (1)

22

Connecting the Speakers

Mount the product onto the speaker by using a screw as shown in the following
connect the speaker cable.

- Only on some models.

When the speaker is installed.

*Connect the input terminal with a proper color match.

Remove the paper.

Cable holder

After installing your speakers, use holders and cable ties to organize the speaker cables.

* This feature is not available in all model.

Cable tie

* This feature is not available in all model.

33

To install Portrait

"When installing Portrait, rotate it clockwise based on its front."

- Only on some models.

44

Using the Remote Control

Name of the Remote Control Buttons

• AV Button

• Sleep Button

When watching AV, RGB PC,HDMI/DVI,

Component

The product will be automatically turned

off after a certain period of time.

Press this button repetitively to

select an appropriate time duration

• PSM Button

- Toggles through preset video
settings.

•

Menu Button

• Check Button

• Volume Button

Volume up and down

• Mute button

There is not a function
which is supported

• UP and Down buttons

Bring up and down direction

adjustment.

• ARC button

Aspect Ratio Correction. Toggles
through aspect ratio options.

• Auto Button

Automatic adjustment function
(Operational for the analog signal only)

•

Exit Button

There is not a function
which is supported

There is not a function
which is supported

There is not a function

which is supported

• Power On/Off Button

• Input Select Button

(See next page)

55

Using the Remote Control

• AV Button

If you press the button once,
the following Input Signal
Window will appear. Select
the signal type you want
using the button.

• Input Select Button

1. Slide off the battery cover.

2. Insert the batteries with correct polarity (+/-).

3. Close the battery cover.

• Dispose of used batteries in the recycle bin to prevent

environmental pollution.

Inserting batteries into remote control.

AAA Type

AV Component
RGB PC HDMI/DVI

Toggles through video

Input

AV

Component
RGB PC
HDMI/DVI

▲▼

66

Name and Function of the Parts

Rear View

*LINE OUT
A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that
the connecting terminal of the PC sound card is checked before connecting. If the Audio Out of
PC sound card has only Speaker Out, reduce the PC volume.

If the Audio Out of the PC sound card supports both Speaker Out and Line Out, convert to Line Out

using the card jumper of the program (Refer to the Sound Card Manual).

* The product image in the user's guide could be different from the actual image.

Power Connector : Connect the power cord

RS-232C Serial Ports

RGB PC, HDMI/DVI Ports

-HDMI Supports High Denition input and HDCP (High-bandwidth Digital Content

Protection). Some devices require HDCP in order to display HD signals.

PC Sound Jack
: Connect the audio cable to the *LINE OUT jack of the PC sound card.

Wired Remote Control Port

AV Ports

LAN Port

Speaker Ports

77

First of all, see if the computer, product and the peripherals are turned off.
Then, connect the signal input cable.

When connecting with the D-Sub signal input cable.

When connecting with the HDMI to DVI signal input cable (not included).

* When HDMI PC is used, a compatiblity problem might occur.

MAC

Macintosh Adapter (not included)
Use the standard Macintosh adapter since an incompatible
adapter is available in the market. (Different signaling system)

Rear side of the product.

Connecting to External Devices

Connect the power cord.

B

A

B

A

PC

PC/

MAC

PC

Rear side of the product.

Rear side of the product.

PC

Rear side of the product.

Connect the Audio cable.

(not included)

* User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintain
standard compliance for the product.

When Connecting to your PC

88

Select an input signal.
Press the INPUT button on the remote control to select the input signal.

Or, press the SOURCE button on the back of the product.

•

How to connect to two computers.

Connect the signal cables (HDMI to DVI and D-Sub) to each computer.
Press the INPUT button on the remote control to select the computer to use.

•

Directly connect to a grounded power outlet on the wall or a power bar with a ground wire.

Note

Turn on power by pressing the power button on the product.

Turn on the PC.

When connecting with a D-Sub signal input cable.

• Select RGB PC : 15-pin

D-Sub

analog signal.

When connecting with a HDMI to DVI signal input cable.

• Select HDMI/DVI :

HDMI to DVI

Digital signal.

B

A

Connecting to External Devices

2

1

Input

AV
Component

RGB PC

HDMI/DVI

Input

AV
Component
RGB PC

HDMI/DVI

▲▼

▲▼

INPUT SET

▼▲

Power button

SOURCE

AUTO/SET

▼▲

99

• Using LAN establishes communication between your PC and the monitor and enables to

use the OSD menus on the PC as well as on the monitor.

Note

Connecting to External Devices

Connect the LAN cable as shown in the below gure .

Connect the LAN cable and install the eZ-Net Manager program on the CD-ROM.
For more information about the program, please refer to eZ-Net Guide in the
enclosed CD-ROM.

Connect PC to Monitor directly.

A

Using a router(Switch)

B

PC

Product

Product

LAN

PC

LAN

Switch

Using the Internet.

C

PC

Product

Network

LAN

When using the LAN

1010

Use this function when displaying ANALOG RGB inputs of a PC to the other product.

Product 1

•

To use different products connected to each other Connect one end of the signal input cable(15-pin

D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN
connector of other products.

Product 2

Product 3

Product 4

15-pin D-Sub Signal Cable

Connecting to External Devices

• When multi-connecting in/out cascade format, no loss cables are recommended.

We recommend that you should use cable distributor.

Note

PC

Daisy Chain Monitors

1111

Kensington Security Slot
The Set is equipped with a kensington Security System
connector on the back panel. The cable and lock are
available separate and are not sold by LG. For more info,
visit http://www.kensington.com, the internet home page
of the Kensington company.

This product supports a VESA FDMI compliant mounting interface. These mounts are purchased
separately and not available from LG. Refer to the instructions included with wall mount for more
info.

Connecting to External Devices

VESA FDMI wall Mounting

1212

Connecting to External Devices

When connecting with an BNC cable.

•

Select AV.

When connecting with an S-Video cable.

•

Select AV.

B

A

When connecting with a S-Video cable.

•

Connect to the S-Video input terminal to

watch high image quality movies.

Connect the video cable as shown in the below gure and then connect the power cord

(See page 7).

B

When connecting with a BNC cable.

•

Connect the input terminal with a
proper color match.

A

BNC Cable

(not included)

Product

VCR/DVD Receiver

Select an input signal.
Press the INPUT button on the remote control to select the input signal.

Or, press the SOURCE button on the back of the product.

• When the BNC cable is connected simultaneously with S-Video cable, S-Video input has a priority.

Note

Audio Cable

(not included)

S-Video Cable

(not included)

Audio Cable

(not included)

Product

VCR/DVD Receiver

Input

AV

Component
RGB PC
HDMI/DVI

▲▼

INPUT SET

▼▲

Video Input

SOURCE

AUTO/SET

▼▲

1313

•

Select Component

Connect the video/audio cable as shown in the below gure and then, connect the power

cord (See page 7).

•

Connect the input terminal with a proper color match.

BNC Cable

(not included)

Product

HDTV Receiver

Select an input signal.
Press the INPUT button on the remote control to select the input signal.

Or, press the SOURCE button on the back of the product.

Audio Cable

(not included)

Connecting to External Devices

Note

- Some devices may require HDCP in order to display HD signals.

- Component doesn't support HDCP.

Input

AV

Component

RGB PC
HDMI/DVI

▲▼

INPUT SET

▼▲

Component Input (480p/576p/720p/1080p/1080i/480i/576i)

SOURCE

AUTO/SET

▼▲

1414

Connect the video/audio cable as shown in the below gure and then connect the power

cord (See page 7).

RCA-PC
Audio Cable
(not included)

Product

VCR/DVD/Set-top Box

HDMI to DVI
Signal Cable
(not included)

VCR/DVD/Set-top Box

Product

Select an input signal.
Press the INPUT button on the remote control to select the input signal.

Or, press the SOURCE button on the back of the product.

HDMI Signal Cable
(not included)

Connecting to External Devices

When connecting with a HDMI to DVI signal input cable.
When connecting with a HDMI signal input cable.

• Select HDMI/DVI

- HDMI Supports High Denition input and HDCP (High-bandwidth Digital Content Protec-

tion). Some devices require HDCP in order to display HD signals.

Note : Dolby Digital is not supported.

Input

AV
Component
RGB PC

HDMI/DVI

▲▼

INPUT SET

▼▲

HDMI Input (480p/576p/720p/1080i/1080p)

SOURCE

AUTO/SET

▼▲

1515

- When using AV input, you can connect the AV Out to other monitors.

Video/TV

BNC Cable

(not included)

Audio Cable
(not included)

BNC Cable

(not included)

Audio Cable
(not included)

Video/TV

Product

Connecting to External Devices

• When multi-connecting in/out cascade format, no loss cables are recommended.

We recommend that you should use cable distributor.

Note

Watching AV Outputs

16

Cable Management

- Only on some models.

Cable
Management

Hold the Cable management with both
hands and pull it downward.

Removing the cable guide.

•

Do not use the cable management as a handle for the Monitor.

Warning

1. Arrange the cables in the center as shown in the following picture.

2. Fit the cable guide to the back to help manage the cables.

17

User Menus

Screen Adjustment options

• Press this button to turn on the power. Press this button again to

turn it off.

• This Indicator lights up blue when the display operates normally(on

mode). If the display is in sleep (Energy Saving) mode, this indicator
color changes to amber.

Power Button

• Adjust the volume.

• Adjust the up and down.

• Use this button to show/hide the OSD (On Screen Display) menu

screen.

MENU Button

• Use

this

button to select an icon or adjust the setting in the OSD screen.

OSD Select /

Adjust Button

Power Indicator

Volume

35

18

User Menus

• This is where the unit receives signals from the remote control.

Screen Adjustment options

[For PC Analog signal]

AUTO/SET Button

A V Composite Video, Separate Video
Component HDTV, DVD
RGBPC 15-pin D-Sub analog signal
HDMI/DVI Digital signal

- Toggles between inputs

SORUCE Button

IR Receiver

[When XGA Mode is active and

1360 X768 is selected]

Input

AV

Component
RGB PC
HDMI/DVI

▲▼

Auto in progress
For optimal display change
resolution to 1360x768

Auto in progress

SOURCE

AUTO/SET

▼▲

19

OSD Menu

Icon Function Description

Picture

Audio

Adjusts the audio options.

Adjusts screen brightness, contrast and color that you prefer.

Note

OSD(On Screen Disp lay)

The OSD function enables you to adjust the screen status conveniently since it provides
graphical presentation.

Option

Adjusts the screen status according to the circumstances.

Time

Adjusts the timer options.

Information

Adjust Set ID and check Serial No. and SW version and IP
address

User Menus

20

User Menus

How to adjust the OSD (On Screen Display) screen

•

Use the remote control to adjust the OSD screen.

How to adjust the screen automatically

Press the AUTO/SET button (AUTO button on a remote Control) in the
PC analog signal. Then optimal screen settings will be selected that fit
into the current mode. If adjustment is not satisfactory, you can adjust
the screen manually.

Press the MENU Button, then the main menu of the OSD appears.

To access a control, use the Buttons.

When the icon you want becomes highlighted, press the SET Button.

Use the Buttons to adjust the item to the desired level.

Accept the changes by pressing the SET Button.

Exit the OSD by pressing the EXIT Button.

1

2

3

4

5

6

Pops up

the menu

screen

Move where

you want to

adjust

Move where

you want to

adjust

Select a

menu icon

Select a

menu icon

Adjust the status

Save

adjustment

Exit from the

menu screen.

[When XGA Mode is active and

1360 X 768 is selected]

Auto in progress

21

User Menus

Adjusting Screen Color

Backlight : To control the brightness of the screen,adjust the brightness of LCD panel.
Contrast : Adjust the difference between the light and dark levels in the picture.
Brightness : To adjust the brightness of the screen.
Color : To adjust the color to desired level.
Sharpness : To adjust the clearness of the screen.
Tint :To adjust the tint to desired level.
Expert : To compensate for each image mode, or adjust image values according to a

particular image. (Applied only to User2 menu.)

Toggles between screen presets.

• Vivid : Select this option to display with a sharp image.

• Standard : The most general and natural screen display status.

• Cinema : Select this option to lower brightness by one level.

• Sport : Select this option to display with a soft image.

• Game : To enjoy dynamic image when playing a game.

• User1,2 : Select this option to use the user-defined settings.

Picture
Mode

Note

If the '

Picture Mode

' setting in the Picture menu is set to Vivid, Standard, Cinema,

Sport or Game the subsequent menus will be automatically set.

Picture

Picture Mode

Color Temperature
Advanced
Aspect Ratio
Picture Reset
Screen

Vivid
Standard
Cinema
Sport
Game
User1
User2

User2

Backlight 20

Contrast 90
Brightness 50
Color 50
Sharpness 50
Tint 50
Expert

MENU

MENU

22

User Menus

Red / Green / Blue

Set your own color levels.

Color Settings

• Cool : Slightly purplish white.

• Medium : Slightly bluish white.

• Warm : Slightly reddish white.

• User : Select this option to use the user-defined settings.

Color
Temperature

Picture

Picture Mode

Color Temperature

Advanced
Aspect Ratio
Picture Reset
Screen

Cool
Medium
Warm
User

Adjusting Screen Color

User

Red 0

Green 0
Blue 0

MENU

MENU