LG M2294A-PM Owner's Manual
User’s Guide
M1994A
M2294A
Make sure to read the Safety Precautions before using the product. Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached on the product and give the information to your dealer when you ask for service.
Before Connecting to the PC
Stand Installation
Before setting up the product, ensure that the power supply, the computer system, and other attached devices is turned off.
Carefully place the product screen side 1 down on a cushioned surface that will
protect product and screen from damage.
2 Insert the stand base into the product
3 Attach the monitor to the Stand Base by turning the screw to the right.
* Turn the screw by using the screw handle
Screw
1
Before Connecting to the PC
Detaching Stand
Before setting up the product, ensure that the power supply, the computer system, and other attached devices is turned off.
1 |
Place the set screen side down on a |
|
cushion or soft cloth. |
2 Detach the monitor to the Stand Base by turning the screw to the left.
Turn the screw by using the screw handle |
4 Pull the stand base. |
5
2
Before Connecting to the PC
Before setting up the product, ensure that the power supply, the computer system, and other attached devices is turned off.
Positioning your display
1. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range |
-5° ~ -2° |
12°~ 18° |
|
Warning:
When adjusting the angle of the screen, do not put your finger(s) in between the head of the monitor and the stand body. You can hurt your finger(s).
Theft prevention locking device
Locking Device
Use this locking cable (This has to be purchased separately if required.) to prevent theft.
3
Name and Function of the Parts
Name of the Remote Control Buttons |
|
|
|
|
|||
|
|
TV/PC : Selects TV or PC mode. |
|
|
|
||
|
|
|
Switches the set on. |
|
|
|
|
TV/PC |
POWER |
POWER |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
INPUT |
|
|
|
|
|
MTS |
A.PROG MEMORY/ERASE CAPTION |
Input |
Each time you press the Input button it will |
|
|||
|
|
|
|||||
|
|
TV |
change to |
|
|
|
|
|
|
TV |
AV |
Component |
RGB |
DVI |
|
|
|
AV |
|||||
|
|
|
HDMI. |
|
|
|
|
|
|
Component |
|
|
|
||
|
|
|
|
|
|
||
|
|
RGB |
If nothing is inputted for several seconds the |
||||
|
|
screen will automatically move to the selected |
|||||
|
|
DVI |
|||||
|
|
|
menu. |
|
|
|
|
Inserting batteries into remote control.
1. Take out the battery cap.
2. Insert the batteries with correct polarity (+/-).
3. Close the battery cap.
• Dispose of used batteries in the recycle bin to prevent environmental pollution.
AAA Type
4
Name and Function of the Parts
Name of the Remote Control Buttons
MUTE |
|
FCR |
|
CH |
|
VOL |
ENTER |
VOL |
|
CH |
|
MENU |
REVIEW |
SLEEP |
APC |
DASP |
ARC/* |
MUTE
Switches the sound on or off.
FCR
Favorite channel button.
CH ( 
) Buttons
Up and Down Button.
Able to change channel.
VOL (
) Buttons
Volume Button
ENTER Button
Use when functional adjustment is completed.
MENU
Use this button to enter the On Screen Display menu.
REVIEW
Turn to the last channel viewed.
SLEEP : SLEEP Timer
You can set a time period after which the all modes should switch itself to standby.
Press the key repeatedly to select the number of minutes. Press the key repeatedly to select the number of minutes.
_ _ _ (off) 
10 
20 
30 
60
240 |
|
180 |
|
120 |
|
90 |
|
|
|
APC Button(Auto Picture Control)
Press repeatedly to select Clear, Optimum, Soft, User picture mode.
DASP Button (Digital Auto Sound Processing)
Use this button to select the sound tone.
Press repeatedly to select Flat, Music, Movie, Sports, User sound tone.
ARC/*
To select the image size of the screen.
•When TV, AV mode: 16:9, Horizon, Zoom1,Zoom2, 4:3
•When RGB/DVI/HDMI/Component mode: 16:9, 4:3
5
Name and Function of the Parts
Rear View
|
COMPONENT |
|
|
|
|
|
IN |
|
|
|
|
|
|
|
S-VIDEO |
|
|
RGB IN (PC) |
B |
<![if ! IE]> <![endif]>VIDEO |
|
|
|
|
PR |
|
|
|
|
|
|
|
|
|
|
|
L |
|
VIDEO |
ANTENNA IN |
|
|
<![if ! IE]> <![endif]>AUDIO |
|
<![if ! IE]> <![endif]>AUDIO |
|
|
AUDIO IN |
R |
L |
|
||
HDMI |
|
|
|
|
|
(RGB/DVI) |
|
|
R |
|
|
|
|
COMPONENT |
|
|
|
|
|
|
IN |
|
|
|
|
|
|
Y |
|
|
|
|
|
|
PB |
|
S-VIDEO |
|
|
|
|
<![if ! IE]> <![endif]>VIDEO |
|
|
|
|
|
RGB IN (PC) |
|
|
|
|
|
|
|
PR |
|
|
|
|
|
|
|
|
|
|
|
|
DVI-D |
L |
|
VIDEO |
ANTENNA IN |
|
|
|
|
|
|
|
|
|
|
|
|
L (MONO) |
<![if ! IE]> <![endif]>AUDIO |
|
|
HDMI |
R |
<![if ! IE]> <![endif]>AUDIO |
|
|
|
AUDIO IN |
|
|
|
|||
|
|
R |
|
|||
|
|
|
|
|
||
(RGB/DVI) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Power Connector : Connect the power cord.
HDMI Digital Signal Connector
DVI Digital Signal Connector
D-Sub Analog Signal Connector
RGB, DVI Sound Jack : Connect to the jack in the PC sound card or D-TV sound Output Jack.
TV Tuner Jack : Connect the antenna.
AV Input Terminal
Component Input Terminal
6
Name and Function of the Parts
AV Input Terminal
S-VIDEO
VIDEO
L |
(MONO) |
<![if ! IE]> <![endif]>AUDIO |
|
S-Video Input Terminal
Video Input Terminal
Audio Input Terminal
R
7
Connecting to External Devices
Connecting to your PC
1.First of all, see if the computer, product and the peripherals are turned off. Then, connect the signal input cable.
Rear side of the product.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A |
|
. |
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rear side of the product.
AC IN
Macintosh Adapter (Not included)
Use the standard Macintosh adapter since an incompatible adapter is available in the market. (Different signaling system)
B Connecting with the DVI signal input cable.
DVI-D
Rear side of the product.
2. Connect the audio cable.
Audio cable
AUDIO IN (RGB/DVI)
Rear side of the product.
• Make sure to check the sound card connection terminal in the PC before connecting to the product.
If the PC sound card supports both Speaker Out and Line Out, change it to Line Out by setting the jumper or the PC application. (For more details, refer to the sound card user’s guide.)
-Speaker Out : The terminal connected to the speaker that is not equipped with an amplifier.
-*Line Out : The terminal connected to the speaker equipped with an amplifier.
If Audio Out in the PC sound card has only Speaker Out, reduce the PC volume. This product is integrated with an amplifier.
8
Connecting to External Devices
3. Connect the power cord.
Rear side of the product.
|
COMPONENT |
|
|
IN |
|
|
Y |
|
RGB IN (PC) |
PB |
<![if ! IE]> <![endif]>VIDEO |
|
PR |
|
DVI-D |
|
|
|
|
|
AC IN |
L |
|
|
|
|
HDMI |
|
<![if ! IE]> <![endif]>AUDIO |
(RGB/DVI) |
R |
|
AUDIO IN |
|
|
S-VIDEO
VIDEO |
ANTENNA IN |
L |
|
R |
|
4. 1 Turn on power by pressing the power button on the product.
Power
2Turn on the PC.
5.Select an input signal.
Press the INPUT button on the remote control to select the input signal. Or, press the INPUT button at the top side of the product.
INPUT 
ENTER
A |
|
|
B |
• Select DVI |
Input |
|
|
|
|
|
|
|
|
|
|
|
|
TV
AV
Component
RGB
DVI
HDMI
|
|
|
|
|
MENU |
|
|
Each time you press the Input button it will change to TV |
AV |
Component |
RGB |
|
DVI |
||
|
|||||||
|
|
HDMI. |
|
|
|
|
|
|
|
|
|
|
|
|
|
If nothing is inputted for several seconds the screen will automatically move to the selected menu.
Note
• Directly connect to a grounded power outlet on the wall or a power bar with a ground wire.
9
Connecting to External Devices
Connecting to VCR/DVD
1.Connect the video/audio cable as shown in the figure below and then connect the power cord (See page 9).
AWhen using the RCA cable.
•Connect the input terminal with a proper colour match.
Rear |
of |
<![if ! IE]> <![endif]>R |
<![if ! IE]> <![endif]>(MONO)L |
<![if ! IE]> <![endif]>VIDEO |
<![if ! IE]> <![endif]>VIDEO-S |
|
|
|
|
||
the Product |
|
AUDIO |
|
|
|
BWhen using the S-Video cable.
•Connect to the S-Video input terminal to watch high image quality movies.
Rear side of |
<![if ! IE]> <![endif]>R |
AUDIOL(MONO) |
<![if ! IE]> <![endif]>VIDEO |
<![if ! IE]> <![endif]>VIDEO-S |
the Product |
RCA Cable |
RCA Cable |
S-Video Cable |
|
(Not included) |
|||
(Not included) |
(Not included) |
||
|
VIDEO |
AUDIO |
|
VIDEO |
AUDIO |
|
VCR/DVD |
OUT |
OUT |
|||
OUT |
OUT |
||||
VCR/DVD |
|
|
|
||
|
|
|
|
2.Select an input signal.
Press the INPUT button on the remote control to select the input signal.
Or, press the INPUT button at the top side of the product.
Input
INPUT |
ENTER |
TV |
||
|
|
|
|
|
|
|
with a RCA cable. |
AV |
|
|
|
|||
|
|
Component |
||
|
|
|
|
RGB |
|
|
a S-Video cable. |
DVI |
|
|
|
|
|
HDMI |
|
|
|
|
|
|
|
|
|
|
|
|
MENU |
|
|
|
Each time you press the Input button it will change to TV |
|
AV |
|
Component |
|
RGB |
|
DVI |
||
|
|
|
|
|||||||
|
|
HDMI. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If nothing is inputted for several seconds the screen will automatically move to the selected menu.
the RCA cable is connected simultaneously as S-Video cable is connected, S-Video cable is first.
10
Loading...