LG M1721A-BM User Guide
Easy Setup Guide
M1717A/M1917A
Please read this Easy setup guide carefully before operating your product.
Retain it for future reference. Record model number and serial number of the product. See the label attached on the product and quote this information to your dealer when you require service.
Safety Precautions
Please read these safety precautions carefully before using the product.
Warning If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
Keep away from heat sources like electrical heaters.
- Electrical shock, fire, malfunction or deformation may occur.
Keep the packing anti-moisture material or vinyl packing out of the reach of children.
-Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
Do not put heavy objects on the product or sit upon it.
- If the product collapses or is dropped, you may be injured. Children must pay particular attention.
Do not leave the power or signal cable unattended on the pathway.
- The passerby can falter, which can cause electrical shock, fire, product breakdown or injury.
Install the product in a neat and dry place.
- Dust or moisture can cause electrical shock, fire or product damage.
Precautions in Moving the Product
Make sure to turn off the product.
- You may be electrocuted or the product can be damaged.
Make sure to remove all cables before moving the product.
- You may be electrocuted or the product can be damaged.
Precautions in Using the Product
Do not disassemble, repair or modify the product at your own discretion.
-Fire or electric shock accident can occur.
-Contact the service center for check, calibration or repair.
When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent scratching. Do not clean with a wet cloth.
Keep the product away from water.
- Fire or electric shock accident can occur.
Electrical Power Related Precautions
Make sure to connect the power cable to the grounded current.
- You may be electrocuted or injured.
Use the rated voltage only.
- The product can be damaged, or you may be electrocuted.
During a thunder or lightning storm, unplug the power cable or signal cable.
- You may be electrocuted or a fire can break out.
Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet. Use a power bar with a grounding terminal designed for exclusive use with the computer.
- A fire can break out due to overheating.
Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.
- You may be electrocuted due to excess moisture.
If you don’t intend to use the product for a long time, unplug the power cable from the product.
- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
Hold the plug when pulling out the power cable. Do not bend the power cord with excessive force or put heavy objects on the power cord.
- The power line can be damaged, which may cause electric shock or fire.
Do not insert a conductor (like a metal chopstick) into one end of the power cable while the other end is connected to the input terminal on the wall.
Additionally, do not touch the power cable right after plugging into the wall input terminal.
- You may be electrocuted.
The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation.
1
Accessories
Make sure the following items are included with your product.
The product and the accessories can be different from the figures shown below.
D-Sub Signal Cable |
Power Cable |
Stand base |
Remote Control/Batteries
CD-ROM/Cards |
Audio Cable (PC) |
|
|
|
|
|
|
|
<![endif]>ENGLISH
To view the User's guide on the CD-ROM
To view the User's guide on the CD-ROM, Adobe Acrobat Reader must be installed on your PC. The "ACRORD"> "INSTALLS" folder on the CD-ROM contains the installation programs for them.
If you want to install those programs, Open the "My Computer"
Open the "Digital_LG" 
Open the "ACRORD" 
Open the "INSTALLS" and double-click your language.
To view the User's guide
The User's guide files are included in the supplied CD-ROM.
Load the supplied CD-ROM into the CD-ROM drive of your PC.
After a while, the web page of the CD-ROM will open automatically.(for Window only)
If the web page does not appear automatically, open the User's guide file directly.
Open the "My computer" 
Open the "Digital_LG" 
Open the "index.htm" file.
Connecting the stand base
Before setting up the product, ensure that the power to the product, the computer system, and other attached devices are turned off.
1.
2.
3.
Place the product with its front facing downward on a soft cloth.
Align the hooks on the stand base with the matching slots in the base of the product.
Insert the hooks into slots.
Hook
Slot
2
Loading...