QUICK MANUAL
AIR
CONDITIONER
Please read this installation manual completely before installing the product. Installation work must be performed in accordance with the national wiring standards by authorized personnel only.
Please retain this installation manual for future reference after reading it thoroughly.
VENTILATOR
Original instruction
[Representative] LG Electronics Inc. EU Representative :
LG Electronics European Shared Service Center B.V.
Krijgsman 1, 1186 DM Amstelveen, The Netherlands [Manufacturer] LG Electronics Inc. Changwon 2nd factory 84, Wanam-ro,
Seongsan-gu, Changwon-si, Gyeongsangnam-do, KOREA
This manual is the simplified version of original manual. You can obtain the original manual from www.lg.com.
www.lg.com
P/NO : MFL69268903 |
Copyright © 2016 - 2017 LG Electronics Inc. All Rights Reserved. |
<![if ! IE]> <![endif]>MALTI |
<![if ! IE]> <![endif]>PORTUGUÊS |
<![if ! IE]> <![endif]>ENGLISH |
<![if ! IE]> <![endif]>SLOVENČINA |
<![if ! IE]> <![endif]>MAGYAR |
<![if ! IE]> <![endif]>ITALIANO |
<![if ! IE]> <![endif]>SLOVENŠČINA |
<![if ! IE]> <![endif]>БЪЛГАРСКИ |
<![if ! IE]> <![endif]>ESPAÑOL |
<![if ! IE]> <![endif]>VALODA LATVIEŠU |
<![if ! IE]> <![endif]>SRPSKI |
<![if ! IE]> <![endif]>FRANÇAIS |
<![if ! IE]> <![endif]>KALBA LIETUVIŲ |
<![if ! IE]> <![endif]>HRVATSKI |
<![if ! IE]> <![endif]>DEUTSCH |
<![if ! IE]> <![endif]>GAEILGE |
<![if ! IE]> <![endif]>SVENSKA |
<![if ! IE]> <![endif]>ΕΛΛΗΝΙΚΆ |
<![if ! IE]> <![endif]>МАКЕДОНСКИ |
<![if ! IE]> <![endif]>NORSK |
<![if ! IE]> <![endif]>ČEŠTINA |
<![if ! IE]> <![endif]>SHQIP |
<![if ! IE]> <![endif]>SUOMI |
<![if ! IE]> <![endif]>NEDERLANDS |
<![if ! IE]> <![endif]>ÍSLENSKA |
<![if ! IE]> <![endif]>DANSK |
<![if ! IE]> <![endif]>POLSKI |
<![if ! IE]> <![endif]>BOSANSKI |
<![if ! IE]> <![endif]>KEEL EESTI |
<![if ! IE]> <![endif]>ROMÂNĂ LIMBA |
<![endif]>ENGLISH
2
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product
! WARNING
This symbol indicates the possibility of death or serious injury.
! CAUTION
This symbol indicates the possibility of injury or damage.
! WARNING
Installation
•Do not use a defective or underrated circuit breaker. Use this appliance on a dedicated circuit.
-There is risk of fire or electric shock.
•For electrical work, contact the dealer, seller, a qualified electrician, or an authorized service center.
-Do not disassemble or repair the product. There is risk of fire or electric shock.
•Always ground the product.
-There is risk of fire or electric shock.
•Install the panel and the cover of control box securely.
-There is risk of fire or electric shock.
•Always install a dedicated circuit and breaker.
-Improper wiring or installation may cause fire or electric shock
•Use the correctly rated breaker or fuse.
-There is risk of fire or electric shock.
•Do not modify or extend the power cable.
-There is risk of fire or electric shock.
•Do not install, remove, or re-install the unit by yourself (customer).
-There is risk of fire, electric shock, explosion, or injury.
•Be cautious when unpacking and installing the product.
-Sharp edges could cause injury.
•For installation, always contact the dealer or an authorized service center.
-There is risk of fire, electric shock, explosion, or injury.
•Do not install the product on a defective installation stand.
-It may cause injury, accident, or damage to the product.
•Do not let the product run for a long time when the humidity is very high and a door or a window is left open.
-Moisture may condense and wet or damage furniture.
•For re-installation of the installed product, always contact the dealer or an authorized service center.
-There is risk of fire, electric shock, explosion or injury.
•Do not open the maintenance cover of the main body during operation.
-Otherwise, it may cause electrical shock.
•Use the outdoor air suction hole with the net installed to ensure that birds could not come in.
-Remove estrange things like the bird’s nest. Otherwise, it may cause scarcity of indoor oxygen.
•Install the air intake where polluted air can not be directly sucked in.
-It may cause various accidents, including suffocation, due to the suction of harmful gasses(CO, etc.)
•Do not install this product in a refrigerated warehouse, heated swimming pool or other location where the temperature and humidity are significantly different.
-There is risk of electrical shock, malfunctioning.
3
• Install this product in an environment where the temperature ranges from -10 °C to +45 °C and the |
<![if ! IE]> <![endif]>ENGLISH |
|
relative humidity is less than 80 %. Its condensation is expected to form, heat up the fresh outside air |
||
|
||
using a duct heater etc. |
|
|
• Take care to ensure that power cable could not be pulled out or damaged during operation. |
|
|
- There is risk of fire or electric shock. |
|
|
• Make the connections securely so that the outside force of the cable may not be applied to the terminals. |
|
|
- Inadequate connection and fastening may generate a heat and cause a fire. |
|
|
• Use the designated electrical wires for the terminal board connections, and connect the wires securely so |
|
|
that they will not become disconnected. (Failure to ensure proper connections may cause fire.) |
|
|
• When passing metal ducts through wooden buildings clad with metal laths, wire laths or metal, these |
|
|
ducts must be installed in such a way that they will not make electrical contact with the metal laths, wire |
|
|
laths or metal sheets. (Power leakage can cause ignition) |
|
Operation
•When the product is soaked (flooded or submerged), contact an authorized service center.
-There is risk of fire or eletric shock.
•Don't touch a dedicated circuit or breaker with wet hands.
-There is risk of electric shock.
•Do not store or use flammable gas or combustibles near the product.
-There is risk of fire or failure of product.
•When flammable gas leaks, turn off the gas and open a window for ventilation before turn the product on.
-Do not use the telephone or turn switches on or off. There is risk of explosion or fire
•Be cautious that water could not enter the product.
-There is risk of fire, electric shock, or product damage.
•Turn the breaker off when cleaning or maintaining the product.
-There is risk of electric shock.
•The outside ducts must be tilted at a gradient (1/30 or more) down toward the outdoor area from the ventilator unit, and properly insulated. (The entry of rain water may cause power leaks, fire or damage to household property.)
•Glove should be worn when doing the installation work. (There is risk of injury.)
! CAUTION
Installation
•Don't connect the ground wire to the window frame or water cock.
-There is risk of electric shock.
•Do not install the product at a smoky and oily place like kitchen or factory.
-Otherwise, oil may adhere to the filter or heating exchanger and cause trouble.
•Install the product in an insulated space from outdoor air.
-In case of installing the product outside of the insulated layer, dewing occurs inside of the main body in winter. And it causes electrical shock or falling of condensed water.
•Keep level even when installing the product.
-To avoid vibration or water leakage.
•Use two or more people to lift and transport the product.
-Avoid personal injury.
•Do not install the product where it will be exposed to sea wind (salt spray) directly.
-It may cause corrosion on the product. Corrosion, particularly on the condenser and evaporator fins, could cause product malfunction or inefficient operation.
<![endif]>ENGLISH
4
Operation
•Use a soft cloth to clean. Do not use harsh detergents, wax or thinner, etc.
-Otherwise, color or surface of the oroduct mav deteriorate.
•Clean the filter and the heat exchanger regularly and use the gloves for cleaning.
-Adhering to a mass of dust may cause the deterioration of air volume.
•Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer ventilator, not a precision refrigeration system.
-There is risk of damage or loss of property.
•Do not block the inlet or outlet of air flow.
-It may cause product failure.
•Do not step on or put anyting on the product.
-There is risk of personal injury and failure of product.
According to IEC 60335-1
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
According to EN 60335-1
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understnd the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
PRIOR TO OPERATION
Preparing for operation
1 Contact an installation specialist for installation.
2 Plug in the power plug properly.
3 Use a dedicated circuit.
4 Do not use an extension cord.
5 Do not start/stop operation by plugging/unplugging the power cord.
6If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Usage
1Being exposed to direct airflow for an extended period of time could be hazardous to your health. Do not expose occupants, pets, or plants to direct airflow for extended periods of time.
2 Due to the possibility of oxygen deficiency, ventilate the room when used together with stoves or other heating devices.
3Do not use this ventilator for non-specified special purposes (e.g. preserving precision devices, food, pets, plants, and art objects). Such usage could damage the items.
Cleaning and maintenance
1 Do not touch the metal parts of the unit when removing the filter. Injuries can occur when handling sharp metal edges.
2 Do not use water to clean inside the ventilator. Exposure to water can destroy the insulation, leading to possible electric shock.
3When cleaning the unit, first make sure that the power and breaker are turned off. The fan rotates at a very high speed during operation. There is a possibility of injury if the unit’s power is accidentally triggered on while cleaning inner parts of the unit.
Service
1 For repair and maintenance, contact your authorized service dealer.
2 The appliance shall be disconnected from its power source during service and when replacing parts