Safety precautions
4 Ventilator
Do not modify or extend the power
cable.
• There is risk of fire or
electric shock.
Do not install, remove, or re-install
the unit by yourself
(customer).
• There is risk of fire,
electric shock, explosion, or injury.
Be cautious when
unpacking and installing the product.
• Sharp edges could
cause injury. Be especially careful of the
case edges and the
fins on the condenser
and evaporator.
For installation, always contact the
dealer or an authorized service center.
• There is risk of fire,
electric shock, explosion, or injury.
Do not install the
product on a defective installation
stand.
• It may cause injury, accident, or damage to
the product.
Do not let the ventilator run for a long
time when the humidity is very high
and a door or a window is left open.
• Moisture may condense and wet or damage furniture.
For re-installation of
the installed product,
always contact the
dealer or an authorized service center.
• There is risk of fire,
electric shock, explosion or injury.
Do not open the
maintenance cover
of the main body
during operation.
• Otherwise, it may
cause electrical shock.
Use the outdoor air
suction hole with the
net installed to
ensure that birds
could not come in.
• Remove estrange
things like the bird’s
nest. Otherwise, it may
cause scarcity of indoor
oxygen.
Install the air intake
where polluted air
can not be directly
sucked in.
• It may cause various
accidents, including
suffocation, due to the
suction of harmful
gasses(CO, etc.)
Install the product a
place that can support its weight.
• Otherwise, it may
cause accident due to
falling of the product.
Precautions must be
taken to avoid the
back-flow of gases into
the room from theopen
flue of gas or other
fuel-burning appliances