INSTALLATION
Electrical Data
Power cord may include a current interrupter
device. TEST and RESET buttons are provided
on the plug case. The device should be tested on
a periodic basis by rst pressing the TEST button
and then the RESET button. If the TEST button
does not trip or if the RESET button will not stay
engaged, discontinue use of the air conditioner
and contact a qualied service technician.
for 240 V
Use Wall Receptacle Power Supply
Use 15 A, time
Standard 240 V, 3-wire
grounding receptacle rated
15 A / 240 VAC / 60 Hz
delay fuse or 15 A,
circuit breaker.
INSTALLATION
WARNING
●This appliance should be installed in
accordance with the National Electrical
Code.
●Use of extension cords could cause serious
injury or death.
- Do not use an extension cord with this
window air conditioner.
- Do not use surge protectors or multi-outlet
adapters with this window air conditioner.
●Never push the TEST button during
operation. Doing so can damage the plug.
- Do not remove, modify, or immerse this
plug. If this device trips, the cause should
be corrected before further use.
CAUTION
●The conductors inside this cord are
surrounded by shields, which monitor
leakage current. These shields are not
grounded. Periodically examine the cord
for any damage. Do not use this product
in the event the shields become exposed.
Avoid shock hazard. This unit cannot be
user-serviced. Do not open the tamperresistant sealed portion. All warranties and
performance will be voided. This unit is not
intended to be used as an ON/OFF switch.
9
10
INSTALLATION
Installation Overview
Foam-PE (2)
(Adhesive backed)
Foam strip
(Non-adhesive)
Drain joint pipe
Left curtain
panel
Accessories
Type 'A' Screws
(12)
Carriage Bolt
(2)
Type 'B' Screws
(7)
Lock Nut
(4)
Support
bracket (2)
Type 'C' Screws
(5)
Right curtain
panel
Frame guide (2)
Window locking
bracket
Sill bracket (2)
Type 'D' Screws
(2)
Tools Needed
Phillips-head
screwdriver
Tape measure Cutting knife Scissors Pencil
Flat-blade screwdriver Adjustable wrench Level