LG LVW9801 User Manual

Before connecting, operating or adjusting this product, please read
this user manual carefully and completely.

Network Dome
Camera

User Manual

MODEL: LVW900
LVW901

AB28

2

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.

FCC WARNING: This equipment may generate or use radio fre­quency energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are expressly
approved in the instruction manual. The user could lose the author­ity to operate this equipment if an unauthorized change or modifi­cation is made.

REGULATORY INFORMATION: FCC Part 15

This equipment has been tested and found to comply with the lim­its for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commer­cial environment.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruc­tion manual, may cause harmful interference to radio communica­tions.
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to cor­rect the interference at his own expense.

A suitable conduit entries, knock-outs or glands shall be pro-•
vided in the cable entries of this product in the end user.

Caution: Danger of explosion if battery is incorrectly replaced. •
Replaced only with the same or equivalent type recommended
by the manufacturer. Dispose of used batteries according to the
manufacturer’s instructions.

Holes in metal, through which insulated wires pass, shall have •
smooth well rounded surfaces or shall be provided with brush­ings.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme
NMB-003 du Canada.

3

Warning: Do not install this equipment in a confined space such as

a bookcase or similar unit.
Warning: Wiring methods shall be in accordance with the National
Electric Code, ANSI/NFPA 70.
Warning: This is a class A product. In a domestic environment this
product may cause radio interference in which case the user may be
required to take adequate measures.
Warning: To reduce a risk of fire or electric shock, do not expose this
product to rain or moisture.
Caution: This installation should be made by a qualified service per­son and should conform to all local codes.
Caution: To avoid electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.
Caution: The apparatus shall not be exposed to water (dripping or
splashing) and no objects filled with liquids, such as vases, shall be
placed on the apparatus.

To disconnect power from mains, pull out the mains cord plug.
When installing the product, ensure that the plug is easily acces­sible.

This product is manufactured to comply with
EMC Directive 2004/108/EC and Low Voltage
Directive 2006/95/EC.

European representative :

LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere,
The Netherlands (Tel : [phone])

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is
attached to a product it means the product is cov­ered by the European Directive 2002/96/EC.

2. All electrical and electronic products should be
disposed of separately from the municipal waste
stream via designated collection facilities appointed
by the government or the local authorities.

3. The correct disposal of your old appliance will help
prevent potential negative consequences for the
environment and human health.

4. For more detailed information about disposal of
your old appliance, please contact your city office,
waste disposal service or the shop where you pur­chased the product.

4

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat reg­isters, stoves, or other apparatus (including amplifiers) that pro­duce heat.

9. Do not defeat the safety purpose of the polarized or grounding­type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are pro­vided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete
outlet.

10. Protect the power cord from being walked on or pinched par­ticularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused
for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate nor­mally, or has been dropped.

5

Handling of the unit

Be careful not to spill water or other liquids on the unit. Be cautions
not to get combustible or metallic material inside the body. If used
with foreign matter inside, the device is liable to fail or to get cause
of fire or electric shock.

Remove dust or dirt on the surface of the lens with a blower.•

Use a dry soft cloth to clean the body. If it is very dirty, use a •
cloth dampened with a small quantity of neutral detergent then
wipe dry.

Avoid the use of volatile solvents such as thinners, alcohol, ben-•
zene and insecticides.
They may damage the surface finish and/or impair the operation
of the device.

Operating and storage location

Avoid viewing a very bright object (such as light fittings) during an
extended period. Avoid operating or storing the unit in the follow­ing locations.

Extremely hot or cold places (operating temperature -30°C ~ •
50°C, however, we recommend that the unit be used within a
temperature range of 0°C ~ 45°C)

Damp or dust place•

Places exposed to rain•

Places subject to strong vibration•

Close to generators of powerful electromagnetic radiation such •
as radio or TV transmitters.

Cautions for Safe Operation

6 Contents

Contents

Introduction ................................................................................... 7

Part names and Functions .................................................................8

Connections ................................................................................. 10

Precautions ...........................................................................................10

Connection Overview ....................................................................... 10

Connecting Network.........................................................................11

Connecting Power Source .............................................................. 12

Connecting Alarm Device ...............................................................13

Connecting Microphone and Speaker Device ......................... 14

Mounting the camera ....................................................................... 15

Operation and settings ...............................................................22

Before using the system ..................................................................22

Recommended PC Requirements ................................................22

Accessing the LG IP device..............................................................22

LG Smart Web Viewer Overview ................................................... 24

Con guring the LG IP camera ........................................................ 25

OSD Menu Setup ................................................................................41

Reference .....................................................................................49

Troubleshooting .................................................................................49

Open source software notice ......................................................... 52

Speci cations.......................................................................................55

Introduction 7

The LG Network Dome Camera is designed to use on an Ethernet
network and must be assigned an IP address to make it accessible.

This manual contains instructions on how to install and manage the
LG Network Dome Camera in your networking environment. Some
knowledge of networking environments would be beneficial to the
reader.

Should you require any technical assistance, please contact autho­rized service center.

Features

The LG Network Dome Camera offers the following functions:

Dual H.264 Stream for single Video Input •

Multi-Codec(H.264, MJPEG) Streaming •

Intelligent Video Analysis (Option) •

PoE(Power over Ethernet) Support (802.3af ) •

3 Power(AC24,DC12,PoE) Support •

Audio Support (G.711,G.726 Full Duplex) •

Pre/Post Alarm Support •

Vandal Proof Support (IP66) •

Direct NAS Writing •

High resolution and high sensitivity with a 1/3 inch Vertical •
Double Interline CCD.

Day & Night function•

540 TV lines of horizontal resolution•

Features Chart

This table shows the differences between the models.

Use LVW901 is used for the description, operations and details pro­vided in this user manual.

Models LVW900 LVW901

VCA No Yes

PTZ No No

PRESET No No

Fan Fail Notification Yes Yes

Fan & Heater
Temperature

Yes Ye s

Accessories

Program CD•

User Manual•

Installation sticker•

Fixing screw & hexagonal wrench•

Introduction

8 Introduction

Part names and Functions

abcd

efghij

a Pan lock screw

Fixes the panning position after adjusting.

b Zoom lock lever

Fixes the zoom position after adjusting.

c Focus lock lever

Fixes the focus position after adjusting.

d Heater

Heater is thermostatically controlled to activated at <15 ºC
(Dome inside)

e Fall Prevention rubber band

Fixes the rubber band into the dome cover.

f Tilting lock screw

Fixes the tilting position after adjusting.

g Video Out connector

Supplies analog video signal (composite) to the connected
device.

h OSD Setup menu control buttons

Use to set the OSD Setup menu.

i RESET button

Push the button more than 3 seconds, this would restore the
factory default settings.

j Azimuth lock screw

Fixes the azimuth angle position after adjusting the azimuth
angle to obtain a level image.

Introduction 9

klmno

pq r

k ETHERNET/POE Port

Connects to a PC or a network via a hub with a 10BASE­T/100BASE-TX cable attached RJ-45 connector.

Note:

Power over Ethernet (PoE) is a technology that integrates
power into a standard LAN infrastructure. It enables power
to be provided to the network device, such as a network
camera, using the same cable as that used for network
connection. It eliminates the need for power outlets at the
device locations and enables easier application of uninter­ruptible power supplies (UPS).

l ALARM IN / ALARM IN RETURN

Provides physical interface for sensor.

ALARM OUT / ALARM OUT RETURN

Provides physical interface for Alarm/Relay.

m AUDIO OUT (Line Level Output)

Connect to an active speaker with a built-in amplifier.

n AUDIO IN (Line Level Input)

Input for a mono microphone, or a line-in mono signal.

o Power input jack

Connects to a DC 12V or AC 24V power supply using proper
cables.

p Camera assembly bracket
q Camera body assembly
r Dome cover

10 Connections

Connections

Precautions

Be sure to switch off the unit before installation and connection.•

The installation should be made by qualified service personnel or system installers.•

Do not expose the power and connection cables to moisture, which may cause damage to the unit.•

Connection Overview

PoE Device

(IEEE802.3af )

PoE Device

(IEEE802.3af)

Connections 11

Connecting Network

You can control and monitor the system via network. With the remote control (monitoring), you can change the system configuration or
monitor the image via network. After the installation, check the network settings for the remote control and monitoring work.

Connect the IP camera to your network using a standard RJ-45 network cable as shown below.

ETHERNET

PoE Device

(IEEE802.3af )

Broadband

Service

Broadband

Service

Router

Broadband

Service

Broadband

Service

PoE Device

(IEEE802.3af)

Router

12 Connections

Connecting Power Source

Connect power, using one of the methods listed below:

To use the power adapter

Connect a DC 12 V / AC 24 V power source to the power input terminal as shown below.

(Connect to the DC 12 V / AC 24 V UL Listed, Class 2 Power Supply only on the unit. )

To use the PoE (Power over Ethernet) device

Connect the PoE cable to the LAN port on the unit. You must use the “IEEE802.3af” standard PoE device.

PoE Device

(IEEE802.3af )

PoE Device

(IEEE802.3af)

Note:

If the camera doesn’t work properly after connect PoE device, please check if the PoE device is supplying enough power.

Connections 13

Connecting Alarm Device

Alarm terminals are used to connect the alarm (relay) devices such as sensors, door switches, etc.

ALARM IN / ALARM IN RETURN (Sensor Input)

Connect the sensor device to the sensor input terminal.

Sensor Device

BLACK

GREEN

ALARM OUT / ALARM OUT RETURN (Relay Output)

Connect the alarm (relay) device to the relay output terminal. Alarm signal is outputted at an event occurrence.

Alarm (relay) Device

RED

WHITE

Note:

The Photo MOS Relay is rated for 100mA at 20V DC or 100mA at 28V AC.

14 Connections

Connecting Microphone and Speaker Device

Optionally connect an active speaker and/or external microphone with a built-in amplifier.

AUDIO OUT

AUDIO IN

Note:

Keep the microphone away from the speaker to avoid howling.

Connections 15

Mounting the camera

You can mount the camera on a ceiling or wall.

Surface mount

Follow the instructions below to surface mount the camera.

1. Use the installation guide template to check the mounting loca­tion. Face the front of the label toward the area of interest. Using
the template as a guide, make a hole through the ceiling.

2. Pass the connection cable through the inner side of the ceiling.

3. Fasten the camera assembly bracket to the ceiling.

16 Connections

4. Connect the cables to the cable jacks of the camera body. 5. Fasten the camera body to the camera assembly bracket.

Connections 17

6. Assemble the camera cover and camera body. You should fasten
the screws using the hexagonal wrench as shown below.

Wall mount (Optional)

Follow the instructions below to install the camera with a wall
mount.

1. Drill holes in the wall where you want to install the wall mount.

2. Install the wall mount as shown below.