LG LTT461BBWI Owner’s Manual
ENGLISH
ﻲﺑﺮﻋ
REFRIGERATOR
Please read this guide thoroughly before operating
and keep it handy for reference at all times.
Models :LTT461BBWI
P/NO.:MFL67225625
www.lg.com
INSTALLATION ..................................................... 2
CONTENTS
FEATURE CHART ................................................ 3
OPERATION ..................................................... 4~5
Starting
Temperature Control
Ice Making
Defrosting
SUGGESTIONS ON FOOD STORAGE ................ 5
CLEANING ............................................................ 6
GENERAL INFORMATION ................................... 6
IMPORTANT WARNINGS ..................................... 7
REPOSITIONING THE DOOR HINGE(Option)
BEFORE CALLING FOR SERVICE .................... 10
SPECIFICATIONS ............................................... 11
....... 8~9
1
THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE, AND UTILIZES THE
LATEST IN TECHNOLOGY.
WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH IT'S PERFORMANCE
AND RELIABILITY.
BEFORE YOU START YOUR REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY.
IT PROVIDES EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION AND
MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS.
INSTALLATION
1. Select a good location.
Place your refrigerator where it is easy to use.
2. Avoid placing the unit near heat sources, direct
sunlight or moisture.
3. To ensure proper air circulation around the
fridge-freezer, please maintain sufficient space
on both the sides as well as top and maintain
at least 2 inches (5 cm) from the rear wall.
4. To avoid vibrations, the unit must be level.
If required, adjust the leveling screw to
compensate for unevenness of the floor.
The front should be slightly higher than the rear
to aid in door closing.
Leveling screw can be turned easily by tipping
the cabinet slightly.
Turn the leveling screw clockwise to raise the
unit, counterclockwise to lower it.
5. Clean your refrigerator thoroughly and wipe off
all dust accumulated during shipping.
6. Install accessories such as ice tray, shelf, etc.,
in their proper places.They are packed together
to prevent possible damage during shipment.
7. Connect the power supply cord (or plug) to the
outlet. Don't double up with other appliances on
the same outlet.
8. Prior to use, leave your refrigerator on for 2 or 3
hours.
Check the flow of cold air on the evaporator to
ensure proper cooling.
Your refrigerator is now ready for use.
9. When you put in a power cord, please refer to
the label situated on the back plate in order to
classify the rating.
10. This appliance is intended to be used in household
and similar applications such as staff kitchen areas
in shops, offices and other working environments;
farm houses and by clients in hotels, motels and
other residential type environments; bed and
breakfast type environments; catering and similar
non-retail applications.
2
3
FEATURES CHART
Evaporator
Drip Tray
Collects water during
defrosting
Ice Tray
Shelves
Crisper & Glass lid
or P.V.C Bar (Optional)
For fruits and vegetables.
Thermostat Dial
For controlling the temperature
in the refrigerator.
Magnetic Door Seal
Door Rack
Leveling Screw
OPERATIONS
STARTING
When your refrigerator is first installed, allow it 2-3 hours to stabilize at normal operating temperature
before filling it with fresh food.
If operation is interrupted, wait 5 minutes before restarting.
TEMPERATURE CONTROL
Your refrigerator has a control that let you regulate
4
3
2
5
6
the temperature in the refrigerator.
Initially, set the control at 4.
For colder temperature, adjust the control to a higher
number, and for warmer temperature, adjust the
control to a lower number.
1
7
0
ICE MAKING
To make ice cubes, fill the ice tray with water and place
it on the evaporator.
To remove ice cubes, hold the tray at its ends and twist
gently.
To remove ice cubes easily, run water on the tray
TIP
before twisting.
CAUTION:
Connect to potable water supply only.
4
DEFROSTING
● It is necessary to regularly defrost your refrigerator in order to ensure efficient operation.
The frost on the surface of the evaporator should not exceed a quarter of an inch (6mm) before
defrosting.
● To defrost, turn the control to 0.
● Before you start the defrosting operation, remove food from the evaporator and put in the drip tray fully
until it stops.
●
When defrosting is completed, remove the drip tray, empty water, dry and put it back fully until it stops.
Turn the control dial to a desired position.
STORING FOOD
● Store fresh food in the refrigerator. How food is frozen and thawed is an important factor in maintaining
its freshness and flavor.
● Do not store food which goes bad easily at low temperatures, such as bananas, pineapples, and melons.
● Allow hot food to cool prior to storing. Placing hot food in the refrigerator could spoil other food and lead
to higher electric bills!
● When storing, cover food with vinyl wrap or store in a container with a lid. This prevents moisture from
evaporating and helps food to keep its taste and nutrients.
● Do not open the door frequently. Opening the door lets warm air enter the refrigerator, causing
temperatures to rise.
● Do not store bottles on the evaporator - they may break when frozen.
● Always clean food prior to refrigeration. Vegetables and fruits should be washed and wiped, and packed
food should be wiped clean to prevent adjacent food from spoiling.
SUGGESTIONS ON FOOD STORAGE
CAUTION: Never use any sharp or metallic instruments to remove ice, frost, or ice trays
from the evaporator.
5
OPERATION
3828JD8497F(O/M)영어내지 2003.5.27 10:26 AM 페이지5
CLEANING
It is important that your refrigerator be kept clean to
prevent undesirable odors. Spilled food should be
wiped up immediately, since it may acidify and
stain plastic surfaces if allowed to settle.
Never use metallic scouring pads, brushes, coarse
abrasive cleaners, or strong alkaline solutions on
any surface.
Before you clean, however, remember that damp
objects will stick or adhere to extremely cold
surfaces. Do not touch frozen surfaces with wet or
damp hands.
EXTERIOR - Use a lukewarm solution of mild soap
or detergent to clean the durable finish of your
refrigerator. Wipe with a clean, damp cloth and
then dry.
For products with a stainless steel exterior, use a
clean sponge or soft cloth and a mildDetergent in
warm water. Do not use abrasive or harsh cleaners.
Dry thoroughly with a Soft cloth. Do not use appliance
wax, bleach, or other products containing chlorine on
stainless steel.
GENERAL INFORMATION
VACATION TIME
During average length vacations, you will probably
find it best to leave the refrigerator in operation.
When you plan to be away for an extended period,
remove all food, disconnect the power cord, clean
the interior thoroughly, and leave the door OPEN to
prevent odor formation.
POWER FAILURE
Most power failures are corrected within an hour or
two and will not affect your refrigerator
temperatures. However, you should minimize the
number of door openings while the power is off.
During power failures of longer duration, place a
block of dry ice on top of your frozen packages.
IF YOU MOVE
Remove or securely fasten down all loose items
inside the refrigerator.
To avoid damaging the leveling screw(s), turn them
all the way into the base.
INTERIOR - Regular cleaning of the interior and
interior parts is recommended. Disconnect the
power supply, and remove food and shelves, trays,
etc. Wash all compartments and shelves, trays etc.
with a baking soda solution. Rinse and dry.
WARNING
Always remove the power cord from the wall
outlet prior to cleaning in the vicinity of
electrical parts. Wipe up excess moisture with
a sponge or cloth to prevent water or liquid
from getting into any electrical part and
causing a electric shock. Do not use
flammable or toxic cleaning liquids.
ANTI-CONDENSATION PIPE
The outside wall of the
refrigerator cabinet may
sometimes get warm,
especially just after
installation. Don't be
alarmed. This is due to
the anti-condensation
pipe, which pumps hot
refrigerant to prevent
"sweating" on the outer
cabinet wall.
Anti-Condensation
Pipe
LAMP REPLACEMENT(Option)
- Lamp specification: 240v/15w
- Replacement
1. Unplug the power cord from the outlet.
2. Remove refrigerator shelves.
3. Remove the lamp by turning it counterclockwise
as shown in the figure at right.
4. Assemble in reverse order of disassembly.
5. Replacement bulb must be the same specification
as original.
6
IMPORTANT WARNINGS
DO NOT USE AN EXTENSION CORD
If possible, connect the refrigerator to its own individual electrical outlet to prevent it and other appliances
or household lights from causing an overload that could cause a power outage.
POWER CORD REPLACEMENT
If the power cord of the refrigerator is damaged, it must be replaced by a repair shop appointed by the
manufacturer, as special tools are required.
ABOUT GROUNDING(EARTHING)
In the event of an electric short circuit, grounding(earthing) reduces the risk of electric shock by providing
an escape wire for the electric current.
In order to prevent possible electric shock, this appliance must be grounded.
Improper use of the grounding plug can result in an electric shock. Consult a qualified electrician or service
person if the grounding instructions are not completely understood, or if you have doubts on whether the
appliance is properly grounded.
VERY DANGEROUS ATTRACTION
An empty refrigerator can be a dangerous
attraction to children. Remove either gasket,
latches, lid or the entire door from your unused
appliance,or take some other action to make it
harmless.
Do not store explosive substances such as
aerosol cans with a flammable propellant in
this appliance.
This appliance must be grounded(earthed).
DON'T WAIT! DO IT NOW!
NEVER STORE EXPLOSIVES AND CHEMICALS
CAUTION
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
7
Loading...