LG LT36 Series, 22LT360C-ZA, 26LT360C-ZA, 32LT360C-ZA, 37LT360C-ZA Owner's Manual

www.lg.com

OWNER’S MANUAL

LED LCD TV

Please read this manual carefully before operating your set and retain it
for future reference.

LT36**

2

TABLE OF CONTENTS

ENG

ENGLISH

25 EXTERNAL CONTROL DEVICE SETUP

25 RS-232C Setup
25 Type of connector;

D-Sub 9-Pin Male
25 RS-232C Configurations
26 Communication Parameters
26 Command reference list
27 Transmission / Receiving Protocol

TABLE OF CONTENTS

3 LICENSES

3 OPEN SOURCE SOFTWARE NOTICE

4 INSTALLATION PROCEDURE

4 ASSEMBLING AND PREPARING

4 Unpacking
7 Parts and buttons
8 Lifting and moving the TV
9 Setting up the TV
9 - Attaching the stand
11 - Mounting on a table
12 - Mounting on a wall
14 - Tidying cables

15 MAKING CONNECTIONS

15 Adapter connection
15 Antenna connection
16 HDMI connection
16 DVI to HDMI connection
17 RGB-PC connection
17 RS-232C Setup
17 Component connection
18 Composite connection
18 Speaker output SETUP
18 USB connection
19 CI module connection
19 Euro Scart connection

20 REMOTE CONTROL

21 MAINTENANCE

21 Cleaning your TV
21 - Screen, frame, cabinet and stand
21 - Power cord

21 TROUBLESHOOTING

22 SPECIFICATIONS

24 IR CODES

WARNING

y

If you ignore the warning message, you may
be seriously injured or there is a possibility
of accident or death.

CAUTION

y

If you ignore the caution message, you may
be slightly injured or the product may be
damaged.

NOTE

y

The note helps you understand and use
the product safely. Please read the note
carefully before using the product.

3

LICENSES / OPEN SOURCE SOFTWARE NOTICE

ENGENGLISH

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC

.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary
of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit
divx.com for more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.

“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”

“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its
subsidiaries and are used under license.”

Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
[e-mail]. This offer is valid for three (3) years from the date on which you purchased the product.

4

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

ENG

ENGLISH

NOTE

y

Image shown may differ from your TV.

y

Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

y

The available menus and options may differ from the input source or product model that you are
using.

y

New features may be added to this TV in the future.

y

The TV can be placed in standby mode in order to reduce the power consumption. And the TV should
be turned off if it will not be watched for some time, as this will reduce energy consumption.

y

The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and this will reduce the overall running cost.

INSTALLATION PROCEDURE

1

Open the package and make sure all the accessories are included.

2

Attach the stand to the TV set.

3

Connect an external device to the TV set.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and item.

CAUTION

y

Do not use any unapproved items to ensure the safety and product life span.

y

Any damages or injuries by using unapproved items are not covered by the manufacturer’s warranty.

y

Some models have a thin film attached on to the screen and this must not be removed.

NOTE

y

The items supplied with your product may vary depending on the model.

y

Product specifications or contents of this manual may be changed without prior notice due to upgrade
of product functions.

y

For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick
and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory
stick does not fit into your TV’s USB port.

*A 10 mm

*B 18 mm

<

=

<

=

B

A

A

B

5

ASSEMBLING AND PREPARING

ENGENGLISH

Remote control and
batteries (AAA)

(See p.20)

Owner’s manual

Cable Holder

(Depending on model)

(See p.14)

Power Cord holder

(Only 32/37/42/47LT36**)

(See p.14)

Stand Screws

4 EA, M4 x 12
2 EA, M4 x 16
(Only 22LT36**)

(See p.9)

Stand Screws

8 EA, M4 x 12
(Only 26LT36**)

(See p.9)

Stand Screws

8 EA, M4 x 14
(Only 32/37/42/47LT36**)
(

See p.10)

Desk-mount Screw

1 EA
(Only 32/37/42/47LT36**)
(

See p.11

)

Power cord

DC Adapter

(Only 22/26LT36**)
(

See p.15

)

Stand body / Stand base

(Only 22LT36**)

(See p.9)

Stand body / Stand base

(Only 26LT36**)

(See p.9)

Stand body / Stand base

(Only 32/37/42/47LT36**)

(See p.10)

Protection cover

(Only 32/37/42/47LT36**)
(See p.13)

Isolator

(Depending on model)

(See p.6)

FREEZE

RATIO

L/R SELECT

ENTER

BACK

EXIT

Q.MENU

INFO

MENU

CHVOL

P
A
G
E

FAV

3D

MUTE

1 2 3

4 5 6

7 809

MARK

LIST

FLASHBK

ENERGY

SAVING

TV

AV MODE

INPUT

LIST

Q.VIEW

TV/RAD

ENERGY

SAVING

RATIO

SETTINGS

GUIDE

Q.MENU

INFO

EXIT

FAV

MUTE

P
A
G
E

P

or

6

ASSEMBLING AND PREPARING

ENG

ENGLISH

NOTE

y

Antenna Isolator Installation Guide

- Use this to install TV in a place where there is a voltage difference between TV Set and GND of
antenna signal.

»

If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact
might be heated and excessive heat might cause an accident.

- You can improve the safety when watching TV by efficiently removing power voltage from TV
antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall,
mount it on the TV. Avoid disconnecting the antenna Isolator after installation.

- Before starting, be sure that the TV antenna is connected.

ANTENNA/

CABLE IN

Cable / Antenna

Wall

Isolator

1. Connect to TV.

2. Connect to Set-Top box.

Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.

“Equipment connected to the protective earthing of the building installation through the mains
connection or through other equipment with a connection to protective earthing - and to a cable

distribution system using coaxial cable, may in some circumstances create a re hazard. Connection

to a cable distribution system has therefore to be provided through a device providing electrical
isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”

When applying the RF Isolator, a slight loss of signal sensitivity can occur.

or

7

ASSEMBLING AND PREPARING

ENGENGLISH

Parts and buttons

Button Description

∨∧

Scrolls through the saved programmes.

- +

Adjusts the volume level.

Turns the power on or off.

Screen

Power Indicator

(Can be adjusted using

the Power Indicator

in the OPTION menu.)

(Only 22/26LT36** )

(Only 32/37/42/47LT36**)

COMPONENT

IN

USB IN

IN 3

Speakers

HDMI IN

USB input

COMPONENT IN

PCMCIA Card Slot

Remote control

8

ASSEMBLING AND PREPARING

ENG

ENGLISH

y

It is recommended to move the TV in the box
or packing material that the TV originally came
in.

y

Before moving or lifting the TV, disconnect the
power cord and all cables.

y

When holding the TV, the screen should face
away from you to avoid damage.

y

Hold the top and bottom of the TV frame rmly.

Make sure not to hold the transparent part,
speaker, or speaker grill area.

y

When transporting a large TV, there should be
at least 2 people.

y

When transporting the TV by hand, hold the TV
as shown in the following illustration.

y

When transporting the TV, do not expose the
TV to jolts or excessive vibration.

y

When transporting the TV, keep the TV upright,
never turn the TV on its side or tilt towards the
left or right.

CAUTION

y

Avoid touching the screen at all times, as this
may result in damage to the screen.

Lifting and moving the TV

When moving or lifting the TV, read the following to
prevent the TV from being scratched or damaged
and for safe transportation regardless of its type
and size.

9

ASSEMBLING AND PREPARING

ENGENGLISH

Setting up the TV

Image shown may differ from your TV.

Attaching the stand

Only 22/26LT36**

Front

Stand Body

Stand Base

M4X20

Top View

1

2

3

M4 x 12

4 EA

(Only 22LT36**)

M4 x 12

4 EA

M4 x 16

2 EA

(Only 26LT36**)

10

ASSEMBLING AND PREPARING

ENG

ENGLISH

Front

1

Stand Body

Stand Base

3

2

M4 x 14

4 EA

CAUTION

y

When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.

y

Make sure that the screws are inserted
correctly and fastened securely. If they are
not fastened securely enough, the TV may
tilt forward after being installed. Do not use
too much force and over tighten the screws;
otherwise screw may be damaged and not
tighten correctly.

NOTE

y

Remove the stand before installing the
TV on a wall mount by performing the
stand attachment in reverse.

4 EA

M4 x 14

M4X20

Top View

Only 32/37/42/47LT36

**