11 Installation Overview
11 Product Specifications
12 Before Installing the Range
13 Installing the Range
16 Engaging the Anti-tip Device
16 Test Run
OPERATION
17
17 Control Panel Overview
18 Changing Oven Settings
18 Clock
-Setting the Hour Mode
18 Oven Light
18 Minimum & Maximum Default Settings
19 Timer On/Off
19 Settings
-Setting Convection Auto Conversion
-Adjusting the Oven Temperature
-Language
-Turning the Preheat Alarm Light On/Off
-Adjusting the Beeper Volume
-Selecting Fahrenheit or Celsius
20 Lockout
21 Start Time (Delayed Timed Cook)
21 Cook Time (Timed Cook)
22 Using the Cooktop
22 Cooking Areas
22 Hot Surface Indicator
22 Using the Cooktop Elements
23 The Recommended Surface Cooking
Setting
24 Using the Proper Cookware
24 Choosing Cookware
24 Home Canning Tips
25 Using the Oven
25 Before Using the Oven
25 Oven Vent
25 Using Oven Racks
25 Bake
26 Convection Mode
27 Recommended Baking and Roasting Guide
28 Broil
29 Recommended Broiling Guide
30 Warm
30 Proof
MAINTENANCE
31
31 Cleaning the Glass-Ceramic Cooktop
32 EasyClean
35 Self Clean (on some models)
37 Cleaning the Exterior
38 Removing and Replacing the Lift-Off Oven
Doors and Drawer
39 Door Care Instructions
TROUBLESHOOTING
40
40 FAQs
42 Before Calling for Service
SMART DIAGNOSIS™
46
46 Using Smart Diagnosis™
®
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
Read and follow all instructions when using the range to prevent the risk of fire, electric
shock, personal injury, or damage. This guide does not cover all possible conditions that
may occur. Always contact your service agent or manufacturer about problems that you do
not understand.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
Download this owner's manual at: http://www.lg.com
This is the safety alert symbol. This symbol alerts you to potential hazards that
can result in property damage and/or serious bodily harm or death.
All safety messages will follow the safety alert symbol and either the word
WARNING or CAUTION. These words mean:
3
WARNING
CAUTION
- Indicates a hazardous situation which, if not avoided, could result
in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result
in minor or moderate injury.
ANTI-TIP DEVICE
WARNING
TO REDUCE THE RISK OF TIPPING, THE APPLIANCE MUST BE SECURED BY A
PROPERLY INSTALLED ANTI-TIP DEVICE. TO CHECK IF THE DEVICE IS INSTALLED
PROPERLY, REMOVE THE DRAWER BODY AND VERIFY THAT THE ANTI-TIP
DEVICE IS ENGAGED, OR GRASP THE TOP REAR EDGE OF THE RANGE BACK
GUARD AND CAREFULLY ATTEMPT TO TILT IT FORWARD. Refer to the installation
section for instructions.
•It is possible for a child or adult to tip the range and be killed.
•Verify that the anti-tip device has been properly installed and
attached to the floor or wall and engaged to the leveling leg of the
range.
•Do not operate the range without the anti-tip device in place and
engaged.
•Never remove the oven legs. The range will not be secured to the
anti-tip bracket if the legs are removed.
•Do not step or sit on the oven door. The range could be tipped and
injury might result from spilled hot liquid, food, or the range itself.
•Do not rest large, heavy items such as whole turkeys on the open
oven door. The range could tip forward and cause injury.
•Reengage the anti-tip device after pulling the range out for
cleaning, service, or any other reason.
•Failure to follow these instructions can result in death or serious
burns to children or adults.
•If the range is placed on a base, an anti-tip bracket should be
installed to prevent the appliance slipping from the base.
Caution, possibility of tilting
Anti-tip restraints
4
IMPORTANT SAFETY INSTRUCTIONS
SAFETY PRECAUTIONS
•DO NOT TOUCH HEATING ELEMENTS OR INTERIOR SURFACES OF OVEN. Heating
elements may be hot even though they are dark in color. Interior surfaces of an oven
become hot enough to cause burns. During and after use, do not touch or let clothing or
other flammable materials contact heating elements or interior surfaces of oven until they
have had sufficient time to cool. Other surfaces, such as oven vent openings and surfaces
near these openings, oven doors, and windows of oven doors, also get hot and may cause
burns if not cooled.
•Use care when opening door. The hot air and steam that escape can cause burns to
hands, face and eyes. Let hot air or steam escape from the oven before removing or
replacing food in the oven.
•Do not repair or replace any part of the appliance unless specifically recommended in the
manual. All other servicing should be performed by a qualified technician.
•Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass,
since they can scratch the surface, which may result in shattering of the glass.
WARNING
If the door glass, cooktop glass, surface, or oven heating unit of the range are damaged,
discontinue use of the range and call for service.
•Do not operate the oven without the charcoal heater mesh.
•Do not use plastic to cover food. Use foil or oven-safe lids only.
•Do not allow anyone to climb, stand or hang on the door, storage drawer or cooktop. They
could damage the range and even tip it over, causing severe personal injury.
•Do not line the oven walls, racks, bottom, or any other part of the oven with aluminum foil
or any other material. Doing so will disrupt heat distribution, produce poor baking results
and cause permanent damage to the oven interior (aluminum foil will melt to the interior
surface of the oven)
•Never attempt to dry a pet in the oven.
•Never use your appliance for warming or heating the room.
•Always use pot holders or oven mitts when removing food from the oven or the surface
element. Cookware will be hot. Use only dry pot holders. Moist or damp pot holders on
hot surfaces may result in burns from steam. Do not let the pot holder touch hot heating
elements. Do not use a towel or other bulky cloth to remove food.
•Do not heat unopened food containers. Pressure in the containers may cause them to
burst which may result in injury.
•To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage
space located above the surface units should be avoided. If cabinet storage is to be
provided, the risk can be reduced by installing a range hood that projects horizontally a
minimum of 5 inches beyond the bottom of the cabinets.
•During use the appliance becomes hot. Care should be taken to avoid touching heating
elements inside the oven.
•The appliance must not be installed behind a decorative door in order to avoid
overheating.
IMPORTANT SAFETY INSTRUCTIONS
FLAMMABLE MATERIALS
WARNING
Be certain that all packing materials are removed from the appliance before operating.
Keep plastic, clothes, paper, and other flammable materials away from parts of the
appliance that may become hot.
•Do not store or use flammable material in the oven or near or on the cooktop. Flammable
materials include paper, plastic, pot holders, linens, wall coverings, curtains, and gasoline
or other flammable vapors and liquids such as grease or cooking oil. These materials can
be ignited when the oven and cooktop are in use.
•Wear proper apparel. Do not wear loose-fitting or hanging garments, which may ignite if
they contact hot surfaces, and cause severe burns.
•Do not use the oven for drying clothes. Only use the oven for its intended purpose.
•If a cabinet storage is provided directly above cooking surface, place items that are not
frequently used and can be safely stored in an area subjected to heat. Temperatures may
be unsafe for volatile items such as flammable liquids, cleaners or aerosol sprays.
•Danger of fire: Do not store items on the cooking surfaces.
ELECTRICAL SAFETY
5
CAUTION
Be certain that all packing materials are removed from the appliance before operating.
Keep plastic, clothes, paper, and other flammable materials away from parts of the
appliance that may become hot.
•Always disconnect power from the appliance before servicing.
•Do not use aluminum foil or any other material to line the oven bottom.
Improper installation of these liners may result in a risk of electric shock or fire.
•Do not allow aluminum foil or the temperature probe to contact heating elements.
•If the supply cord is damaged, it must be replaced by the manufacturer (its service agent
of similarly qualified persons) in order to avoid a hazard.
WARNING
•Ensure that the appliance is switched off before replacing the lamp to avoid the
possibility of electric shock.
•If the surface is cracked, switch off the appliance to avoid the possibility of electric shock.
DEEP FAT FRYER
•Use extreme caution when moving or disposing of hot grease.
•Always heat fat slowly, and watch as it heats.
•If frying combinations of oils and fats, stir them together before heating.
•Use a deep fat thermometer, if possible, to prevent overheating fat beyond the smoking
point.
•Use the least possible amount of fat for effective shallow or deep-fat frying. Filling the pan
with too much fat can cause spillovers when food is added.
WARNING
Unattended cooking on a hob with fat or oil can be dangerous and may result in a fire.
6
IMPORTANT SAFETY INSTRUCTIONS
CHILD SAFETY
•Do not touch the hot surface between the bottom of the oven door and the top of the
drawer on the front of the oven while the oven is in operation. The surface becomes hot
and can cause burns and other injury.
•Do not leave small children unattended near the oven.
WARNING
•Do not leave children alone or unsupervised near the appliance when it is in use or
is still hot. Children should never be allowed to sit or stand on any part of the appliance
as they could be injured or burned.
•Accessible parts may become hot during use. Young children should be kept away.
CAUTION
Do not store items of interest to children in cabinets above a range or on the back guard
of a range – children climbing on the range to reach items could be seriously injured.
•Never let a child hang on the oven door.
•Do not allow children to crawl into the oven.
•Let hot utensils cool in a safe place, out of reach of small children.
•Children should not be allowed to play with controls or other parts of the appliance.
•Children should be supervised to ensure that they do not play with the appliance.
•During an oven self-clean cycle, the surfaces may get hotter than usual and children
should be kept away.(on some models)
GLASS-CERAMIC COOKING SURFACE
WARNING
Unattended cooking on a hob with fat or oil can be dangerous and may result in a fire.
CAUTION
The cooking process has to be supervised. A short term cooking process has to be
supervised continuously.
•Surface units may be hot even though they are dark in color. Areas near surface units may
become hot enough to cause burns. During and after use, DO NOT TOUCH SURFACE UNITS OR AREAS NEAR UNITS or let clothing or other flammable materials contact
surface units or areas near units until they have had sufficient time to cool. This includes
the cooktop and the area above the oven door.
•Do not cook on a broken cooktop. If the cooktop is broken, cleaning solutions and
spillovers may penetrate the broken cooktop and create a risk of electric shock. Contact a
qualified technician immediately.
•Do not use the glass cooktop surface as a cutting board.
•Do not place or store items that can melt or catch fire on the glass cooktop, even when it
is not being used.
IMPORTANT SAFETY INSTRUCTIONS
•Choose proper burner size. For smaller pots and pans, use the smaller heating
elements. For larger pots and pans, use the larger heating elements. Select pans that
have flat bottoms large enough to cover the heating elements. Using undersized pans
exposes a portion of the heating element to direct contact and may result in clothing
burning.
•Glazed cookware. Only certain types of glass, glass-ceramic, ceramic, earthenware,
or other glazed cookware are suitable for range-top service without breaking due to the
sudden change in temperature.
•Never cook directly on the glass. Always use cookware.
•Always turn the surface units off before removing cookware.
•Turn cookware handles inward so they don't extend over adjacent surface units.
This reduces the risk of burns, ignition of flammable materials, and spillage due to
unintentional contact with the cookware.
•Immediately clean spills on the cooking area to prevent a tough cleaning chore later.
•Some cleaners can produce dangerous fumes if applied to a hot surface.
•Always place the pan in the center of the surface unit you are cooking on. Never leave surface units unattended at high heat settings. Proper contact of cookware to burner
also will improve efficiency. Boilovers cause smoking and greasy spills that may catch on
fire.
•Clean cooktop with caution. Do not use sponges or cloth to wipe spills on a hot cooking
area. Use a proper metal scraper. If a wet sponge or cloth is used to wipe spills on a hot
cooking area, it can cause steam burns. Some cleaners can produce noxious fumes if
applied to a hot surface.
•Do not turn surface units on before placing cookware.
•Do not store heavy items above the cooktop surface that could fall and damage it.
•Do not place aluminum foil or plastic items such as salt and pepper shakers, spoon
holders, or plastic wrappings or any other material on the range when it is in use.
•Do not use a steel-wool pad or scrub pad or abrasive cleaning pads. They can scratch the
surface.
7
ENERGY SAVING TIPS
•Multiple-rack cooking saves time and energy. Whenever possible, cook foods requiring the
same cooking temperature together in one oven.
•For optimal performance and energy savings, follow the guides on page 27 for proper rack
and pan placements.
•Match the size of the cookware to the amount of food being cooked to save energy when
heating. Heating ½ quart of water requires more energy in a 3-quart pot than in a 1-quart
pot.
•Use cookware with flat bottoms to provide the best contact with the cooktop surface when
cooking on the glass-ceramic cooktop.
•Match the size of the cooktop burner or element to the size of the cookware in use. Using
a large element for a small pan wastes heating energy, and the exposed surface of the
element is a burn or fire hazard.
•Reduce energy use by cleaning light oven soils with the EasyClean
self-clean.
•Avoid opening the oven door more than necessary during use. This helps the oven
maintain temperature, prevents unnecessary heat loss, and saves on energy use.
®
feature instead of
8
IMPORTANT SAFETY INSTRUCTIONS
SAFETY DURING USE
•Do not touch the oven racks while they are hot.
•If a rack must be moved while the oven is hot, do not let the pot holder contact the hot
heating element in the oven.
•Use caution with the Timed Cook or Delayed Timed Cook features. Use the automatic
timer when cooking cured or frozen meats and most fruits and vegetables. Foods that can
easily spoil, such as milk, eggs, fish, meat or poultry, should be chilled in the refrigerator
first. Even when chilled, they should not stand in the oven for more than 1 hour before
cooking begins, and should be removed promptly when cooking is complete. Eating
spoiled food can result in sickness from food poisoning.
•Accessible parts may become hot when the grill is in use.
•Do not place food or cookware on the bottom of the oven cavity. Doing so will cause
permanent damage to the oven bottom finish.
•Do not use water on grease fires. Should an oven fire occur, leave the oven door closed
and turn the oven off. If the fire continues, throw baking soda on the fire or use a fire
extinguisher. Do not put water or flour on the fire. Flour may be explosive and water can
spread a grease fire and cause personal injury.
•Pull the oven rack to the stop-lock position when loading and unloading food from the
oven. This helps prevent burns caused by touching hot surfaces of the door and oven
walls.
•Do not use the oven if a heating element develops a glowing spot during use or shows
other signs of damage. A glowing spot indicates the heating element may fail and present
a potential burn, fire, or shock hazard. Turn the oven off immediately and have the heating
element replaced by a qualified service technician.
•When using cooking or roasting bags in the oven, follow the manufacturer’s directions.
SAFETY WHEN CLEANING
•Open a window or turn on a ventilation fan or hood before self-cleaning.
•If the oven is heavily soiled with oil, self-clean the oven before using the oven again. The
oil could cause a fire.
•Wipe up heavy soil on the bottom of the oven before using the Self Clean function.
•Do not use oven cleaners. Commercial oven cleaner or oven liner protective coating of
any kind should not be used in or around any part of the oven.
•Never keep pet birds in the kitchen. The health of birds is extremely sensitive to the fumes
released during an oven self-clean cycle. Fumes may be harmful or fatal to birds. Move
birds to a well-ventilated room.
•Before self-cleaning the oven, remove the broiler pan, all oven racks, the meat probe and
any utensils or food from the oven.
•Important Instruction. The oven displays an F error code and sounds three long beeps
during the self-cleaning process if it malfunctions in the self-clean mode. Switch off the
electrical power to the main fuse or breaker and have the oven serviced by a qualified
technician.
•It is normal for the cooktop of the range to become hot during a self-clean cycle.
Therefore, touching the cooktop during a self-clean cycle should be avoided.
•Never pour cold water over a hot oven for cleaning. Doing so may cause the oven to
malfunction.
•Make sure oven lights are cool before cleaning.
•Do not clean door gasket. The door gasket is essential for a good seal. Care should be
taken not to rub, damage, or move the gasket.
•Excess spillage must be removed before cleaning.
IMPORTANT SAFETY INSTRUCTIONS
•If there is a fire in the oven during self-clean, turn the oven off and wait for the fire to go
out. Do not force the door open. Introduction of fresh air at self-clean temperatures may
lead to a burst of flame from the oven. Failure to follow this instruction may result in severe
burns.
•Steam cleaner is not to be used.
COOK MEAT AND POULTRY THOROUGHLY
•To protect against food-borne illnesses, cook meat and poultry thoroughly. The USDA has
indicated the following as safe minimum internal temperatures for consumption:
•Ground beef: 160 °F (71.1 °C)
•Poultry: 165 °F (73.9 °C)
•Beef, veal, pork, or lamb: 145 °F (62.8 °C)
•Fish/seafood: 145 °F (62.8 °C)
Using Oven Racks
•The racks have a turned-up back edge that prevents them from being pulled out of the
oven cavity.
•When removing racks, pull the rack straight out until it stops, and lift up the front of the
rack and pull it out.
•When replacing racks, place the end of the rack on the support, and tilt the front end up
and push the rack in.
9
CAUTION
•Replace oven racks before turning the oven on to prevent burns.
•Do not cover the racks with aluminum foil, or any other material, or place anything on
the bottom of the oven. Doing so will result in poor baking and may damage the oven
bottom.
•Only arrange oven racks when the oven is cool.
Installation Guide for Flicker (EN 61000-3-3 & EN 61000-3-11)
•This device is intended for the connection to a power supply system with a maximum
permissible system impedance Z
of the user’s supply. The user has to ensure that this device is connected only to a power
supply system which fulfills the requirement above. If necessary, the user can ask the
public power supply company for the system impedance at the interface point.
of 0.3117 Ω at the interface point (power service box)
MAX
10
PRODUCT OVERVIEW
PRODUCT OVERVIEW
Parts
Controller
Cooktop
Oven door
Storage drawer
Accessories
Included Accessories
Standard Rack
- LRE3061/LRE3163/LRE3193 (2ea)
- LRE3083 (3ea)
Spray bottle
(1ea)
Glass-ceramic
Gasket
Rack
Model & serial
number plate
Non-scratch
scouring pad (1ea)
Optional Accessories
GridBroiler pan
NOTE
•Contact LG Customer Service at 800 244 2929 if any accessories are missing.
•For your safety and for extended product life, only use authorized components.
•The manufacturer is not responsible for product malfunction or accidents caused by the use of separately
purchased, unauthorized components or parts.
•The images in this guide may be different from the actual components and accessories, which are subject
to change by the manufacturer without prior notice for product improvement purposes.
•The appliance is not intended to be operated by means of an external timer or separate remote-control
system.
INSTALLATION
INSTALLATION
Installation Overview
Please read the following installation instructions first after purchasing this product or transporting it to another
location.
11
Check and choose the
proper location
Ground Wire
(Green+Yellow)
Neutral Wire
(Blue)
Connect the supply cordEngage the anti-tip deviceTest run
Live Wire
(Brown)
Install anti-tip deviceLevel the range
Product Specifications
The appearance and specifications listed in this manual may vary due to constant product improvements.
Oven Range ModelsLRE3083, LRE3061, LRE3163, LRE3193
DescriptionElectric Single Oven Range
LRE3083 - 220 V, 60 Hz : 11.1 kW
Electrical requirements
Exterior Dimensions
LRE3061 - 220 V, 60 Hz : 12.2 kW
LRE3163 - 220~240 V, 50/60 Hz : 13.2 kW
LRE3193 - 220~240 V, 50/60 Hz : 11.8 kW
7
/8" (W) x 47 7/16" (H) x 26 1/2" (D) (
29
75.7 cm (W) x 120.4 cm (H) x 67.3 cm (D) (
D with door closed and excluding door handle
D with door closed and excluding door handle
)
)
Height to cooking surface36" (91.4 cm)
LRE3083 : 157 lb (71 kg)
Net weight
Total capacity6.3 cu.ft.
Self Clean function is provided only for model LRE3083.
LRE3061 : 148 lb (67 kg)
LRE3163 : 148 lb (67 kg)
LRE3193 : 157 lb (71 kg)
12
INSTALLATION
Before Installing the Range
WARNING
Tip - Over Hazard
•A child or adult can tip the range and be killed. Verify
the anti-tip bracket has been installed. Ensure the
anti-tip bracket is engaged when the range is moved.
Do not operate the range without the anti-tip bracket
in place. Failure to follow these instructions can result
in death or serious burns to children and adults.
•In order to prevent tipping of the appliance, this
Caution, possibility of tiltingAnti-tip restraints
To check that leveling leg is inserted into anti-tip bracket, grasp the
top rear edge of the range and carefully attempt to tilt it forward.
stabilising means must be installed.
Anti-tip bracket
Leveling leg
If you did not receive an anti-tip bracket with your purchase, call 800 244 2929 to receive one at no cost.
WARNING
•The information in this manual should be followed exactly. Failure to do so may result in fire, electrical
shock, property damage, personal injury, or death.
•Wear gloves during the installation procedure. Failure to do so can result in bodily injury.
•Have the installer show you the location of the circuit breaker or fuse. Mark it for easy reference.
•As when using any appliance generating heat, there are certain safety precautions you should follow.
•Be sure your range is installed and grounded properly by a qualified installer or service technician.
•The appliance must not be installed behind a decorative door in order to avoid overheating.
•If the range is placed on a base, an anti-tip bracket should be installed to prevent the appliance slipping from
the base.
INSTALLATION
13
Installing the Range
Unpacking and Moving the Range
CAUTION
•You should use two or more people to move
and install the range. (Excessive Weight
Hazard) Failure to do so can result in back or
other injury.
•Do not use the door handles to push or
pull the range during installation or when
moving the range out for cleaning or
service. Doing so can result in serious damage
to the door of the range.
Remove packing material, tape and any temporary
labels from your range before using. Do not remove
any warning-type labels, the model and serial number
label, or the Tech Sheet that is located on the back of
the range.
To remove any remaining tape or glue, rub the area
briskly with your thumb. Tape or glue residue can also
be easily removed by rubbing a small amount of liquid
dish soap over the adhesive with your fingers. Wipe
with warm water and dry.
Do not use sharp instruments, rubbing alcohol,
flammable fluids, or abrasive cleaners to remove tape
or glue. These products can damage the surface of
your range.
Your range is heavy and can be installed on soft
floor coverings such as cushioned vinyl or carpeting.
Use care when moving the range on this type of
flooring. Use a belt when moving the range to prevent
damaging the floor. Or slide the range onto cardboard
or plywood to avoid damaging the floor covering.
Choosing the Proper Location
CAUTION
•Avoid placing cabinets above the range. To
minimize the hazard caused by reaching over
the open flames of operating burners, install a
ventilation hood over the range that projects
forward at least five inches beyond the front of
the cabinets.
•Make sure wall covering, countertop and
cabinets around the range can withstand
the heat (up to 194 °F) generated by the
range. Discoloration, delamination or melting
may occur. This range has been designed to
comply with the maximum allowable wood
cabinet temperature of 194 °F.
•Before installing the range in an area
covered with linoleum or other synthetic
floor covering, make sure the floor covering
can withstand temperatures of at least
200 °F (93 °C).
•Use an insulated pad or
plywood under the range if installing the
range over carpeting.
The range should always be plugged into its own
individual properly grounded electrical outlet. This
prevents overloading house wiring circuits which
could cause a fire hazard from overheated wires. It is
recommended that a separate circuit serving only this
appliance be provided.
1
/4 in. (0.64 cm)
14
INSTALLATION
Dimensions and Clearances
NOTE
Save for the use of the local electrical inspector.
36"
(91.4 cm)
29.8"
(75.7 cm)
A = 30" (76.2 cm) ~ 31" (78.7 cm)
3" (7.6 cm)
24"
(60.9 cm)
24"
(60.9 cm)
Acceptable
electrical
outlet area
Cabinet
opening
3" (7.6 cm)
25"
(63.5 cm)
36"
(91.4 cm)
Normal counter
top depth
Counter
top height
30"
(76.2 cm)
*30" (76.2 cm)
Minimum
**15"
(38.1 cm)
36"
(91.4 cm)
Minimum Dimensions
* 30" (76.2 cm) minimum clearance between the top of the cooking surface and the bottom of an unprotected
wood or metal cabinet; or 24" (60.9 cm) minimum when bottom of wood or metal cabinet is protected by not less
1
/4" (6.4 cm) flame retardant millboard covered with not less than no. 28 MSG sheet steel, 0.015"
** 15" (38.1 cm) minimum between countertop and adjacent cabinet bottom.
INSTALLATION
15
Installing the Anti-tip Device
WARNING
Tip - Over Hazard
Caution, possibility of tiltingAnti-tip restraints
•A child or adult can tip the range and be killed.
Verify the anti-tip bracket has been installed.
Ensure the anti-tip bracket is engaged when the
range is moved.
Do not operate the range without the antitip bracket in place. Failure to follow these
instructions can result in death or serious burns
to children and adults.
•In order to prevent tipping of the appliance, this
stabilising means must be installed.
To check that leveling leg is
inserted into anti-tip bracket,
grasp the top rear edge
of the range and carefully
attempt to tilt it forward.
Anti-tip
bracket
Leveling
leg
Leveling the Range
Level the range by adjusting the leveling legs with a
wrench. Extending the legs slightly may also make it
easier to insert the rear leg into the anti-tip bracket.
Use a level to check your adjustments. Place the level
diagonally on the oven rack, and check each direction
for level.
First check direction
Then check direction
on the rack, adjust the leveling legs with a wrench.
.
. If the level doesn’t show level
2
1
Anti-tip
bracket
Screw must
enter wood or
concrete
Wall plate
Locate the anti-tip bracket using the template
An anti-tip bracket is packaged with the template.
The instructions include necessary information to
complete the installation. Read and follow the range
installation instruction sheet (template).
16
INSTALLATION
Engaging the Anti-tip Device
•Move the range close enough to the opening to
plug into the receptacle.
•Slide the range into position ensuring that the back
leg slides under the anti-tip bracket. The range
should sit flush against the back wall when properly
installed.
•Carefully attempt to tip the range forward to ensure
that the anti-tip bracket is engaged properly. If
properly installed, the anti-tip bracket will prevent
the range from being tipped. If the range can be
tipped, reinstall the range until the anti-tip bracket is
properly installed and the range will not tip forward.
•Turn on electrical power. Check the range for
proper operation.
Test Run
Check if the range is properly installed and run a test
cycle.
Press Clear/Off to start test.
1
Turn on each burner to the Hi setting to check
2
that the surface heating elements are working
properly. The elements should glow red and
radiate heat, and they should cycle on and off
periodically even when the setting is in the Hi
position. This cycling prevents the glass-ceramic
from being cracked by thermal shock.
IMPORTANT : The warming zone does not
consume enough power to glow red.
After checking all the surface heating elements,
3
check the locking system by pressing Clear/Off
for three seconds. The oven door should lock
and the cooktop should not operate while the
Lockout function is turned on. Press Clear/Off
for three seconds to disable Lockout.
The Lockout function should disable controls for
the oven and cooktop.
Now check the oven's operation. Press Bake
4
and press the number keys to set the oven
temperature to 350 °F.
The oven should finish preheating in 15 minutes,
5
and the convection fan should operate while the
oven is preheating.
After checking the oven's operation, turn the
6
temperature up to 450 °F and leave the oven on
for at least an hour to help remove any oil which
might cause smoke and odors when first using
the oven.
NOTE
Smoke may come out of the range when it is first
used.
OPERATION
1234
567
1234
567
12346
57
Control Panel Overview
For Model: LRE3061 / LRE3163
For Model: LRE3083
OPERATION
17
For Model: LRE3193
1
Features
2
Oven Control
3
Number Keys
4
Start Key
Hot Surface Indicator
The HS(hot surface) indicator appears in the display as long as any surface cooking area is too hot to touch. It
remains on after the element is turned off and until the surface has cooled to approximately 150 ˚F. Also, The HS
indicator appears during the self clean cycle.
Flashing Time
If your oven displays a flashing clock, press Clock and reset the time, or press any key to stop the flashing.
5
Clear Off / Lockout Key
6
Smart DiagnosisTM
7
Cooktop Control
18
OPERATION
Changing Oven Settings
Clock
The clock must be set to the correct time of day in
order for the automatic oven timing functions to work
properly.
Press Clock.
1
Press the numbers to enter the time. For
2
example, to set the clock for 10:30, press the
numbers: 1, 0, 3 and 0.
Press START.
3
NOTE
•The time of day cannot be changed during a
timed baking or self-clean cycle.
•To check the time of day when the display is
showing other information, press Clock.
•If no other keys are pressed within 25 seconds
of pressing Clock, the display reverts to the
original setting.
•If the display time is blinking, you may have
experienced a power failure. Reset the time.
Setting the Hour Mode
The control is set to use a 12-hour clock. To reset the
clock to 24-hour mode, follow the steps below.
Press and hold Clock for three seconds.
1
Press 1 for 12-hour or press 2 for 24-hour.
2
Press Start to accept the change.
3
Oven Light
The interior oven light automatically turns on when
the door is opened. Press Light / Oven Light to
manually turn the oven light on.
NOTE
The oven light cannot be turned on if the Self
Clean (on some models) function is active.
Minimum & Maximum Default
Settings
All of the features listed have a minimum and a
maximum time or temperature setting that may be
entered into the control. An entry acceptance beep
sounds each time a control key is pressed.
An entry error tone (two short tones) sounds if the
entry of the temperature or time is below the minimum
or above the maximum setting for the feature.
Feature
hour(s)
Clock
hour(s)
hour(s)
Timer
hour(s)
hour(s)
Cook Time
hour(s)
Conv. Bake
Conv. Roast
BroilLo Hi
Bake
Proof12 hour(s)
Warm3 hour(s)
Self Clean
(on some
models)
EasyClean
®
minimum
Temperature
/ Time
12
24
12
24
12
24
1:00
hour(s) /
minute(s)
0:00
hour(s) /
minute(s)
0:01
second(s)
0:01
second(s)
0:01
minute(s)
0:01
minute(s)
300 °F /
150 °C
300 °F /
150 °C
170 °F /
80 °C
3 hour(s)5 hour(s)4 hour(s)
Temperature
maximum
/ Time
12:59
hour(s) /
minute(s)
23:59
hour(s) /
minute(s)
11:59
hour(s) /
minute(s)
11:59
hour(s) /
minute(s)
11:59
hour(s) /
minute(s)
11:59
hour(s) /
minute(s)
550 °F /
285 °C
550 °F /
285 °C
550 °F /
285 °C
Default
350 °F
(*325 °F)/
12 hour(s)
350 °F
(*325 °F)/
12 hour(s)
Hi /
3 hour(s)
350 °F /
12 hour(s)
20
minute(s)
* Using Auto Conversion
•Default cook mode times are without setting cook
time.
OPERATION
19
Timer On/Off
The Timer On/Off serves as an extra timer in the
kitchen that beeps when the set time has run out. It
does not start or stop cooking.
The Timer On/Off feature can be used during any of
the other oven control functions.
Setting the Timer (for example to set 5 minutes)
Press Timer On/Off once.
1
0:00 appears and Timer flashes in the display.
Press 5.
2
0:05 appears in the display.
Press Timer On/Off to start the Timer. The
3
remaining time countdown appears in the
display.
NOTE
If Timer On/Off is not pressed, the timer returns
to the time of day.
When the set time runs out, End shows in the
4
display. The indicator tones sound every 15
seconds until Timer On/Off is pressed.
NOTE
•If the remaining time is not in the display, recall
the remaining time by pressing Timer On/Off.
•Press Timer On/Off twice to set the time in
minutes and seconds.
•Press Timer On/Off once to set the time in
hours and minutes.
Canceling the Timer Before the Set Time Has Run
Out
Press Timer On/Off once.
1
The display returns to the time of day.
Settings
Press the Settings key repeatedly to toggle through
and change oven settings.
The Settings key allows you to:
•enable/disable convection auto conversion
•adjust the oven temperature
• set the language
•activate/deactivate the preheating alarm light
•set the beeper volume
•switch the temperature scale between Fahrenheit
and Celsius
Setting Convection Auto Conversion
When Conv. Bake and Conv. Roast are selected,
Convection Auto Conversion automatically converts the
standard recipe temperature entered to a convection
temperature by subtracting 25 °F / 14 °C. This
auto-converted temperature shows on the display. For
example, select Conv. Bake, enter 350 °F, and 325 °F
shows on the display after preheat.
Convection Auto Conversion is enabled by default. To
change the setting, follow these instructions.
Press Settings repeatedly until Auto appears in
1
the display.
Press 1 to enable or press 2 to disable.
2
Press START to accept the change.
3
Adjusting the Oven Temperature
Your new oven may cook differently from the one
it replaced. Use your new oven for a few weeks to
become more familiar with it before changing the
temperature settings. If after familiarizing yourself with
the new oven, you still think that it is too hot or too
cold, you can adjust the oven temperature yourself.
NOTE
To begin, either raise or lower the thermostat
15 °F (8 °C). Try the oven with the new setting. If
the oven still needs adjustment, raise or lower the
thermostat again, using the first adjustment as a
gauge. For example, if the adjustment was too
much, raise or lower the thermostat 10 °F (5 °C).
If the adjustment was not enough, raise or lower
the thermostat 20 °F (12 °C). Proceed in this way
until the oven is adjusted to your satisfaction.
20
OPERATION
Press Settings repeatedly until AdJU appears in
1
the display.
Use the number keys to enter the number
2
of degrees you want to adjust the oven
temperature.
Adjust the temperature either up or down by
3
pressing Settings repeatedly to toggle between
plus (+) or minus (-).
Press START.
4
NOTE
•This adjustment does not affect the broiling or
Self Clean(on some models) temperatures. The
adjustment is retained in memory after a power
failure. The oven temperature can be increased
(+) or decreased (-) as much as 35 °F or 19 °C.
•Once the temperature is increased or
decreased, the display shows the adjusted
temperature until it readjusts.
Language
The default language of the display is English. It can
be changed to Spanish or French.
Press Settings repeatedly until Lng appears in
1
the display.
Press 1 for English or Press 2 for Spanish or
2
Press 3 for French.
Press START to accept the change.
3
Adjusting the Beeper Volume
Press Settings repeatedly until BEEP appears
1
in the display.
Press 1 for NORMAL, or 2 for MUTE.
2
Press START to accept the change.
3
Selecting Fahrenheit or Celsius
Set the oven temperature display to show either
Fahrenheit (°F) or Celsius (°C) units. The oven
defaults to Fahrenheit unless changed by the user.
Press Settings repeatedly until Unit appears in
1
the display.
Press 1 for °F (Fahrenheit) or press 2 for °C
2
(Celsius).
Press START to accept the change.
3
Lockout
The Lockout feature automatically locks the oven door
and prevents most oven controls from being turned
on. It does not disable the timer and the interior oven
light.
Press and hold Clear/Off for three seconds.
1
(For model LRE3083 : Press and hold START
for three seconds.)
The lock melody sounds, OVEN LOCKOUT
2
appears in the display and the lock
the display.
blinks in
Turning the Preheat Alarm Light On/Off
When the oven reaches its set-temperature, the
preheating alarm light flashes 5 times or until the
oven door is opened.
You can activate or deactivate the preheating alarm
light.
Press Settings repeatedly until PrE appears in
1
the display.
Press 1 for on or press 2 for off.
2
Press START to accept the change.
3
Once the oven door is locked, the lock
3
indicator stops blinking and remains on.
To deactivate the Lockout feature, press and
4
hold Clear/Off for three seconds. The unlock
melody sounds and the door and the controls
unlock.
NOTE
In models without a self-clean mode, the Lockout
feature locks the controls but not the oven door.
The lock
indicator does not blink.
OPERATION
21
Start Time (Delayed Timed Cook)
The automatic timer of the Delayed Timed Cook
function turns the oven on and off at the time you
select. This feature can be used with the Bake, Conv.
Bake and Conv. Roast modes.
Setting a Delayed Timed Cook
For example, to bake at 300 °F and delay the start
of baking until 4:30, first set the clock for the correct
time of day.
Press Bake. 350 °F appears in the display.
1
Set the temperature: Press 3, 0 and 0.
2
Press Cook Time and set the baking time.
3
Press Start Time.
4
Set the start time: Press 4, 3 and 0 for 4:30.
5
Press START. A short beep sounds and Timed
6
Delay and the start time appear in the display.
The oven begins baking at the set start time.
NOTE
•To cancel the Delayed Timed Cook function,
Press Clear/Off at any time.
•To change the cooking time, repeat step 3 and
press START.
•If the oven clock is set as a 12-hour clock, you
can delay the cook time for 12 hours. If the
oven clock is set as a 24-hour clock, you can
delay the cook time for 24 hours.
The oven will continue to cook for the set amount
of time and then turn off automatically. When the
cooking time has elapsed:
•End and the time of day show in the display.
•The cook end indicator tone sounds every 60
seconds until Clear/Off is pressed.
•When Warm is set, the warming function is
activated after the cooking time ends.
CAUTION
•Use the automatic timer when cooking cured or
frozen meats and most fruits and vegetables.
Foods that can easily spoil, such as milk, eggs,
fish, meat or poultry, should be chilled in the
refrigerator. Even when chilled, they should
not stand in the oven for more than 1 hour
before cooking begins, and should be removed
promptly when cooking is completed.
•Eating spoiled food can result in sickness from
food poisoning.
Cook Time (Timed Cook)
Set the oven to cook for a specific length of time
using the Timed Cook feature. This feature can only
be used with the Bake, Conv. Bake and Conv. Roast
modes.
Setting the Cook Time Function
For example, to bake at 300 °F for 30 minutes, first
set the clock to the correct time of day.
Press Bake. 350 °F appears in the display.
1
Set the temperature.
2
Press 3, 0 and 0.
Press Cook Time. Timed flashes in the display.
3
Bake, 0:00 and 300 °F appear in the display.
Set the baking time: press 3 and 0 (for 30
4
minutes). The baking time can be set for any
amount of time between 1 minute and 11 hours
and 59 minutes.
Press START.
5
NOTE
To activate the Warm function at the end of the
timed cook cycle, repeat steps 1-4 and then press
Warm. Warm appears in the display.
(Refer to the Warm section on page 30)
The oven will continue to cook for the set amount
of time and then turn off automatically. When the
cooking time has elapsed:
•End and the time of day show in the display.
•The cook end indicator tone sounds every 60
seconds until Clear/Off is pressed.
•When Warm is set, the warming function is
activated after the cooking time ends.
Changing the Cook Time during Cooking
For example, to change the cook time from 30
minutes to 1 hour and 30 minutes, do the following.
Press Cook Time.
1
Change the baking time: press 1, 3, 0.
2
Press START to accept the change.
3
22
OPERATION
Using the Cooktop
Cooking Areas
The cooking areas on your range are identified by
permanent circles on the glass cooktop surface.
For the most efficient cooking, fit the pan size to the
element size.
Pans should not extend more than
beyond the cooking area.
When a control is turned on, a glow can be seen
through the glass cooktop surface. The element
cycles on and off to maintain the preset heat
setting, even on Hi.
SINGLE
LRE3083 / LRE3061 /
It is normal to see a very faint red ring around the
outer edge of a dual or triple element when using
it as a single element at a high heat setting. This
is only a reflection from the bright glow of the
center element and is not a malfunction.
WARM
ZONE
DUALSINGLE
LRE3163
NOTE
SINGLE
Hot Surface Indicator
Once the element is turned off, HS (hot surface
indicator) appears in the display as long as the
surface cooking area is too hot to touch.
It remains on until the surface has cooled to
approximately 150 °F.
NOTE
During Self Clean (available on some models),
HS remains on.
1
/2 to 1-inch
SINGLE
WARM
ZONE
DUALDUAL
LRE3193
SINGLE
Using the Cooktop Elements
CAUTION
•Only use cookware and dishes that are safe for
oven and cooktop use.
•Always use oven mitts when removing food
from the cooktop and oven.
•Do not place sealed containers on the cooktop.
•Do not use plastic wrap to cover food while on
the cooktop. Plastic may melt onto the surface
and be very difficult to remove.
•Never leave food on the cooktop
unattended. Spillovers can cause smoke.
Greasy spillovers may catch on fire.
•The surface element may appear to have
cooled after it has been turned off. The element
may still be hot and touching the element before
it has cooled sufficiently can cause burns.
Turning on a Single Element
Press the ON/OFF button that controls the
1
desired surface element.
Press the + button once to adjust the element
2
temperature to Hi, or the – button once to adjust
the element temperature to Lo.
Use the – / + buttons to adjust the element
3
temperature settings. The element temperature
settings are adjustable at all times.
To turn off the element after cooking, press the
4
ON/OFF button once.
SINGLE
CAUTION
It is normal for the surface elements to cycle on
and off during cooking, even on higher settings.
This will happen more frequently if cooking on a
lower temperature setting.
NOTE
•Hi is the highest temperature available.
•Lo is the lowest temperature available.
•Press and hold the + or – buttons to quickly
scroll through the temperature settings.
OPERATION
23
Turning on the Dual Element
Adjust the dual element according to the pot/pan size
being used.
Inner elementAOuter element
B
Press the ON/OFF button that controls the
1
desired surface element.
Press the SELECT button to select either the
2
inner (smaller) or outer (larger) element function.
The dual elements default to the inner element
function. The light bars above the SELECT
button indicate whether the element is adjusted
for the inner or outer element function. One bar
will display for the inner element and two bars
will display for outer element.
Press the + button once to adjust the element
3
temperature to Hi, or the – button once to adjust
the element temperature to Lo.
Turning on the Warming Zone
Use the Warming Zone to keep food warm after it has
already been cooked. The warming zone is not meant
for cooking food. Attempting to cook uncooked or
cold food on the warming zone could result in a foodborne illness.
Press the warming zone ON/OFF button. The
1
warming zone indicator light flashes.
Press the + button once to adjust the
2
temperature to Hi, or the – button once to adjust
the temperature to Lo. Power level sequence is
from – Lo, 2, 3, 4, Hi or from + Hi, 4, 3, 2, Lo.
Use the – / + buttons to adjust the temperature
3
settings. The temperature settings are adjustable
at all times.
To turn off the warming zone, press the ON/OFF
4
button once.
WARMING
ZONE
Use the – / + buttons to adjust the element
4
temperature settings. The element temperature
settings are adjustable at all times.
To turn off the element after cooking, press the
5
ON/OFF button once.
DUAL
NOTE
•Hi is the highest temperature available.
•Lo is the lowest temperature available.
•Press and hold the + or – buttons to quickly
scroll through the temperature settings.
The Recommended Surface Cooking
Setting
SettingRecommended Use
8.5-Hi
5.5-8.0
3.5-5.0
2.2-3.0
Lo-2.0
•Bring liquid to a boil
•Start cooking
•Hold a rapid boil, frying, deep fat fry
•Quickly brown or sea food
•Maintain a slow boil
•Fry or saute foods
•Cook soups, sauces and gravies
•Stew or steam food
•Simmer
•Keep food warm
•Melt chocolate or butter
•Simmer
24
OPERATION
Using the Proper Cookware
The size and type of cookware will influence the
settings needed for the best cooking results. Be
sure to follow the recommendations for using proper
cookware.
Cookware should have flat
bottoms that make good
contact with the entire surface
heating element. Check for
flatness by placing a ruler
across the bottom of the
cookware. The ruler should
touch the cookware across
the entire bottom, with no
gaps.
Cookware recommendations
•Flat bottom and straight sides
•Heavy-gauge pans
•Pan sizes that match the amount of food to be
prepared and the size of the surface element
•Weight of handle does not tilt pan. Pan is well
balanced
•Tight-fitting lids
•Flat bottom woks
Cookware should not
Choosing Cookware
The cookware material determines how evenly and
quickly heat is transferred from the surface element to
the pan bottom. The most popular materials available
are:
•Aluminum - Excellent heat conductor. Some types
of food will cause it to darken (anodized aluminum
cookware resists staining and pitting). If aluminum
pans slide across the ceramic cooktop, they may
leave metal marks which will resemble scratches.
Remove these marks immediately.
•Copper - Excellent heat conductor but discolors
easily. May leave metal marks on glass-ceramic
(see Aluminum above).
•Stainless steel - Slow heat conductor with uneven
cooking results. Is durable, easy to clean and
resists staining.
•Cast iron - A poor heat conductor but retains heat
very well. Cooks evenly once cooking temperature
is reached. Not recommended for use on ceramic
cooktops.
•Porcelain-enamel on metal - Heating
characteristics will vary depending on base
material. Porcelain-enamel coating must be smooth
to avoid scratching ceramic cooktops.
•Glass - Slow heat conductor. Not recommended for
ceramic cooktop surfaces because it may scratch
the glass.
•have a curved or warped
bottom.
•be smaller or larger than the
surface burner.
•have a heavy handle that tilts
the pan.
•be a wok with a ring stand.
•have loose or broken handles.
•have loose-fitting lids.
NOTE
•Do not use pans less than 7 inches in
diameter on the front elements.
•Do not use foil or foil-type containers. Foil may
melt onto the glass. Do not use the cooktop if
metal has melted on it. Call an authorized LG
Service Center.
Home Canning Tips
Be sure that the canner is centered over the
surface element and is flat on the bottom.
•The base must not be more than 1 inch larger than
the element. Use of water bath canners with rippled
bottoms may extend the time required to bring the
water to a boil and may damage the cooktop.
•Some canners are designed with smaller bases for
use on smooth surfaces.
•Use the high heat setting only until the water comes
to a boil or pressure is reached in the canner.
•Reduce to the lowest heat setting that maintains
the boil, or pressure. If the heat is not turned down,
the cooktop may be damaged.
OPERATION
25
Using the Oven
Before Using the Oven
NOTE
•Because the oven temperature cycles, an oven
thermometer placed in the oven cavity may not
show the same temperature that is set on the
oven.
•It is normal for the convection fan to run while
preheating during a regular bake cycle.
•The convection fan motor may run periodically
during a regular bake cycle.
•The fan turns off if the door is left open during
baking. The fan turns back on automatically
once the door is closed.
Oven Vent
Areas near the vent may become hot during operation
and may cause burns. Do not block the vent opening.
Avoid placing plastics near the vent as heat may
distort or melt the plastic.
It is normal for steam to be visible when cooking
foods with high moisture content.
Replacing Racks
Place the end of the rack on the support.
1
Tilt the front end up and push the rack in.
2
CAUTION
•Replace oven racks before turning the oven on
to prevent burns.
•Do not cover the racks with aluminum foil, or
any other material, or place anything on the
bottom of the oven. Doing so will result in poor
baking and may damage the oven bottom.
•Only arrange oven racks when the oven is cool.
Bake
Bake is used to prepare foods such as pastries,
breads and casseroles. The oven can be programmed
to bake at any temperature from 170 °F (80 °C) to
550 °F (285 °C). The default temperature is 350 °F
(175 °C).
Setting the Bake Function (example, 375 °F)
Press Bake.
1
Oven Vent
Using Oven Racks
The racks have a turned-up back edge that prevents
them from being pulled out of the oven cavity.
Removing Racks
Pull the rack straight out until it stops.
1
Lift up the front of the rack and pull it out.
2
Set the oven temperature: press 3, 7 and 5.
2
Press START. The oven starts to preheat.
3
As the oven preheats, the temperature is displayed
and rises in 5-degree increments. Once the oven
reaches the set temperature, a tone sounds and the
oven light blinks on and off.
When cooking is complete, press Clear/Off.
4
Remove food from the oven.
5
NOTE
It is normal for the convection fan to operate
periodically throughout a normal bake cycle in the
oven. This is to ensure even baking results.
26
OPERATION
Baking Tips
•Baking time and temperature will vary depending
on the characteristics, size, and shape of the
baking pan used.
•Check for food doneness at the minimum recipe
time.
•Use metal bakeware (with or without a nonstick
finish), heatproof glass-ceramic, ceramic or other
bakeware recommended for oven use.
•Dark metal pans or nonstick coatings will cook food
faster with more browning. Insulated bakeware will
slightly lengthen the cooking time for most foods.
NOTE
The oven bottom has a porcelain-enamel finish.
To make cleaning easier, protect the oven bottom
from excessive spillovers by placing a cookie
sheet on the rack below the rack you are cooking
on. This is particularly important when baking a
fruit pie or other foods with a high acid content.
Hot fruit fillings or other foods that are highly
acidic may cause pitting and damage to the
porcelain-enamel surface and should be wiped up
immediately.
Tips for Convection Baking
•Use Convection Bake for faster and more even
multiple-rack cooking of pastries, cookies, muffins,
biscuits, and breads of all kinds.
•Bake cookies and biscuits on pans with no sides
or very low sides to allow heated air to circulate
around the food. Food baked on pans with a dark
finish will cook faster.
•When using Convection Bake with a single rack,
place the oven rack in position 4. If cooking on
multiple racks, place the oven racks in positions 2
and 4(or 5) for two racks.
•Multiple oven rack cooking may slightly increase
cook times for some foods.
•Cakes, cookies and muffins have better results
when using multiple racks.
The Convection Roast feature is designed to give
optimum roasting performance. Convection Roast
combines cooking with the convection fan to roast
meats and poultry. The heated air circulates around
the food from all sides, sealing in juices and flavors.
Foods are crispy brown on the outside while staying
moist on the inside. Convection roasting is especially
good for large tender cuts of meat, uncovered.
Convection Mode
The convection system uses a fan to circulate
the heat evenly within the oven. Improved heat
distribution allows for even cooking and excellent
results while cooking with single or multiple racks.
Setting the Convection Function (example, 375 °F)
Press Conv. Bake or Conv. Roast. The display
1
flashes 350 °F.
Set the oven temperature: press 3, 7 and 5.
2
Press START. The display shows Conv. Bake or
3
Conv. Roast and the oven temperature starting
at 100 °F.
As the oven preheats, the display shows increasing
temperatures in 5-degree increments. Once the oven
reaches the set adjusted temperature, a tone sounds
and the oven light flashes on and off. The display
shows the auto converted oven temperature, 350 °F
and the fan icon.
When cooking has finished or to cancel, press
4
Clear/Off.
NOTE
The oven fan runs while convection baking. The
fan stops when the door is open. In some cases,
the fan may shut off during a convection bake
cycle.
Tips for Convection Roasting
Use a broiler pan and grid when preparing meats for
convection roasting. The broiler pan catches grease
spills and the grid helps prevent grease splatters.
Place the oven rack on the bottom.
1
Place the grid in the broiler pan.
2
Place the broiler pan on the oven rack.
3
Grid (sold separately)
Broiler pan (sold separately)
CAUTION
•Do not use a broiler pan without a grid.
•Do not cover the grid with aluminum foil.
•Position food (fat side up) on the grid.
OPERATION
27
Recommended Baking and Roasting
Guide
Baking results will be better if baking pans are centered
in the oven as much as possible. If cooking on multiple
racks, place the oven racks in the positions shown.
Rack and Pan Placement
Single rack baking
Rack (Position 4)
Multiple rack baking
For Model: LRE3061
Baking rack guide
Food
•Layer cakes
Cakes
Cookies
Pizza
Pastry
Crust
Breads
Desserts
Custards
Soufflés •Sweet or savory2
Casserole •Frozen lasagna5
•Bundt cakes
•Angel food cake
•Sugar cookies
•Chocolate chips
•Brownies
•Fresh
•Frozen
•From scratch
•Refrigerator
•Biscuit, canned
•Biscuit, from scratch
•Muffins
•Fruit crisps and
cobblers, from scratch
•Pies, from scratch,
2-crust fruit
•Cheesecake,
crème brulée
position
Rack
4
3
3
4
4
4
3
3
4
4
5
5
5
4
4
2
Rack (Position 2)Rack (Position 5)
For Model: LRE3163
Rack (Position 3)Rack (Position 5)
For Model: LRE3083
Rack (Position 2)Rack (Position 4)
For Model: LRE3193
Rack (Position 2)Rack (Position 4)
Roasting rack guide
Food
Rib
Beef
Pork
Poultry
Boneless
rib, top
sirloin
Beef
tenderloin
Rib2
Bone-in, sirloin2
Ham, cooked2
Whole chicken2
Chicken pieces2
Turkey2
Rare
Medium
Well done
Rare
Medium
Well done
Rare
Medium
Rack
position
2
2
2
2
2
2
2
2
28
OPERATION
Broil
The Broil function uses intense heat from the upper
heating element to cook food. Broiling works best for
tender cuts of meat, fish, and thinly cut vegetables.
Some models may feature a hybrid broiler consisting
of an inner broiler that utilizes a carbon heating
element which provides instantaneous heat, and
a traditional outer broiling element. During normal
broiler operation, it is normal for either element to
cycle off intermittently.
CAUTION
•Do not use a broiler pan without a grid. Oil can
cause a grease fire.
•Do not cover the grid and broiler pan with
aluminum foil. Doing so will cause a fire.
•Always use a broiler pan and grid for excess fat
and grease drainage. This will help to reduce
splatter, smoke, and flare-ups.
Smoking
Due to the intense heat associated with broiling, it
is normal to experience smoke during the cooking
process. This smoke is a natural byproduct of
searing and should not cause you to worry. If you are
experiencing more smoke than you are comfortable
with, use the following tips to reduce the amount of
smoke in your oven.
Always use a broiler pan. Do not use saute pans
1
or regular baking sheets for safety reasons.
The broiler pan should always be thoroughly
2
cleaned and at room temperature at the
beginning of cooking.
Always run your cooktop ventilation system or
3
vent hood during broiling.
Keep the interior of your oven as clean as
4
possible. Leftover debris from prior meals can
burn or catch fire.
Avoid fatty marinades and sugary glazes. Both
5
of these will increase the amount of smoke you
experience. If you would like to use a glaze,
apply it at the very end of cooking.
Setting the Oven to Broil
Oven door must always be closed during Broil
1
mode.
Press Broil or Speed Broil once for Hi or twice
2
for Lo.
Press START. The oven begins to heat.
3
Let the oven preheat for approximately five
4
minutes before cooking the food if using broil.
Press Clear/Off to cancel at any time or when
5
cooking is complete.
If you are experiencing significant smoke with
6
any food item, consider:
•Lowering the broiler to the Lo setting.
•Lowering the rack position to cook the food
further away from the broiler.
•Using the Hi broil setting to achieve the level of
searing you desire, and then either switching
to the Lo broil setting, or switching to the Bake
function.
As a rule, fattier cuts of meat and fish will
7
produce more smoke than leaner items.
Adhere to the recommended broil settings and
8
cooking guidelines in the chart on the following
page whenever possible.
Loading...
+ 64 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.