LG LMXS30796S/00, LMXS30796D/00, LMXC23796S/00, LMXC23796D/00 Owner’s Manual

OWNER’S MANUAL

FRENCH DOOR REFRIGERATOR

Please read this owner's manual thoroughly before operating and keep it handy for reference at all times.

www.lg.com

ENGLISH FRANÇAIS ESPAÑOL

LMXS30796* LMXC23796*

TABLE OF CONTENTS

ENGLISH

TABLE OF CONTENTS

3 PRODUCT FEATURES

IMPORTANT SAFETY INSTRUCTIONS

7 COMPONENTS

7 Refrigerator Exterior 8 Refrigerator Interior

9 INSTALLATION

9 Installation Overview 10 Specifications 11 Unpacking the Refrigerator 11 Choosing the Proper Location 11 - Flooring 12 - Ambient Temperature 12 - Measuring Clearances 12 Removing/Assembling the Refrigerator

Door Handles

13 Removing/Assembling the Freezer

Drawer Handle

13 Removing/Assembling the Doors and

Drawers 14 - Removing the Left Refrigerator Door 15 - Removing the Right Refrigerator Door 16 - Assembling the Right Refrigerator Door 17 - Assembling the Left Refrigerator Door 18 - Removing the CustomChill™ Drawer 19 - Assembling the CustomChill™ Drawer 19 - Removing the Freezer Drawer 21 - Assembling the Freezer Drawer 22 Connecting the Water Line 22 - Before You Begin 22 - Water Pressure 22 - What You Will Need 23 - Water Line Installation Instructions 25 Turning On the Power 26 Leveling and Door Alignment 26 - Leveling 26 - Door Alignment

27 HOW TO USE

27 Before Use 28 Control Panel 28 - Control Panel Features 31 Smart Features 35 In-Door Ice Bin 35 - Detaching the In-Door Ice Bin 35 - Assembling the In-Door Ice Bin 36 Automatic Icemaker 36

- Turning the Automatic Icemaker On or Off 37 - When You Should Turn the Icemaker Off 37 - Normal Sounds You May Hear 37 - Preparing for Vacation 38 Ice and Water Dispenser 38 - Dispenser 38 - Using the Dispenser 38 - Locking the Dispenser 38 - Cleaning the Dispenser Stand 39 Storing Food 39 - Food Preservation Location 40 - Food Storage Tips 40 - Storing Frozen Food 42 Glide‘N’Access™ 42 EasyReach™ 42 Humidity Controlled Crisper 43

Detaching and Assembling the Storage Bins

InstaView Door-in-Door 46 CustomChill™ Drawer 47 Adjusting the Refrigerator Shelves

48 MAINTENANCE

48 Cleaning 49 Replacing the Fresh Air Filter 49 Replacing the Water Filter

52 SMART DIAGNOSIS™

52 Using Smart Diagnosis™

53 TROUBLESHOOTING

63 WARRANTY

PRODUCT FEATURES

ENGLISH

PRODUCT FEATURES

* Depending on the model, some of the following functions may not be available.

FILTERED WATER AND ICE DISPENSER

The water dispenser dispenses fresh, chilled water. The ice dispenser dispenses cubed and crushed ice.

DOOR ALARM

The Door Alarm function is designed to prevent refrigerator malfunctioning that could occur if a refrigerator door or freezer drawer remains open. If a refrigerator door or freezer drawer is left open for more than 60 seconds, a warning alarm sounds at 30 second intervals.

CUSTOMCHILL™ DRAWER

The CustomChill™ Drawer provides storage space with a variable temperature control that keeps the compartment either colder or warmer than the refrigerator. Use it to store meat and seafood, cold drinks, deli snacks, or chilled wine.

ICE PLUS

Ice production can be increased by approximately 20 percent when the freezer section is maintained at the coldest temperature for a 24-hour period.

INSTAVIEW DOOR-IN-DOOR

Use this space to store frequently used items like beverages and snacks. Knock twice on the glass to see at a glance if you need to stock up, without opening the refrigerator door.

HUMIDITY CONTROLLED CRISPER

The Humidity Controlled Crisper is designed to help keep your fruits and vegetables fresh and crisp.

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

This guide contains many important safety messages. Always

read and obey

all safety messages.

WARNING

You can be killed or seriously injured if you do not follow instructions.

CAUTION

Indicates an imminently hazardous situation which, if not avoided, may result in minor or moderate injury, or product damage.

WARNING

To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety precautions should be followed, including the following:

Power

NEVER unplug your refrigerator by pulling on the power cord. Always grip the plug firmly and pull it

straight out from the outlet. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a

similarly qualified person in order to avoid a hazard. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

Do not use an uncertified power outlet.

Unplug the power plug immediately in the event of a blackout or thunderstorm.

Plug in the power plug with the power cord facing downward.

Installation

Contact an authorized service center before you install or relocate the refrigerator.

When moving your refrigerator away from the wall, be careful not to roll over or damage the power

cord. Prior to use, ensure that you are connecting this product to a dedicated, grounded electrical outlet

rated for use with this product (115V, 60Hz, AC only). It is the user’s responsibility to replace a standard 2-prong wall outlet with a standard 3-prong wall outlet.

Do not install the refrigerator where there may be a danger of the unit falling.

Use

DO NOT allow children to climb, stand, or hang on the refrigerator doors or on the shelves in the

refrigerator. They could damage the refrigerator and seriously injure themselves. Do not hang on to or place heavy objects on the refrigerator’s dispenser.

Do not place heavy or dangerous objects (bottles with liquid) on the refrigerator.

Do not put live animals inside the refrigerator.

Do not allow children to climb into the product when it is in use.

In the event of a gas leak (propane/LPG), ensure adequate ventilation and contact an authorized service

center before resuming use. Do not touch or disassemble the electric outlet of the refrigerator. In the event of a refrigerant leak, move flammable objects away from the refrigerator. Ensure adequate

ventilation and contact an authorized service center. Do not use or place flammable substances (chemicals, medicine, cosmetics, etc) near the refrigerator

or store them inside the refrigerator. Do not place the refrigerator in the vicinity of flammable gas.

This is the safety alert symbol. It alerts you to safety messages that inform you of hazards that can kill or hurt you or others, or cause damage to the product.

All safety messages will be preceded by the safety alert symbol and the hazard signal word WARNING or CAUTION. These words mean:

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

This product is not to be used for special purposes such as the storage of medicine or test materials

or for use on ships, etc. Unplug the power plug before cleaning or repairing the refrigerator.

When you replace the light bulb in the refrigerator, unplug the refrigerator or turn off the power.

Do not modify or extend the power cord.

Do not use a dryer to dry the interior. Do not light a candle to remove interior odors.

For your safety, this appliance must be properly grounded. Have the wall outlet and the circuit

checked by a qualified electrician to make sure the outlet is properly grounded. Do not use an outlet that can be turned off with a switch. Do not use an extension cord. It is the

user’s responsibility to replace a standard 2-prong wall outlet with a standard 3-prong wall outlet. Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

Do not use an adapter plug and plug the power plug into a multi-outlet extension cord.

Disconnect the power cord immediately if you hear a noise, smell a strange odor or detect smoke

coming from the appliance. Turn the power off if water or dust penetrates into the refrigerator. Call a service agent.

Do not disassemble or modify the refrigerator.

Do not put hands, feet, or metal objects below or behind the refrigerator.

Do not operate the refrigerator or touch the power cord with wet hands.

In refrigerators with automatic icemakers, avoid contact with the moving parts of the ejector

mechanism or with the heating element that releases the cubes. Do not place fingers or hands on the automatic ice-making mechanism while the refrigerator is plugged in.

When dispensing ice from the dispenser, do not use crystal ceramics.

Do not touch the cold surfaces in the freezer compartment with wet or damp hands, when your

refrigerator is in operation. Do not put glass containers, glass bottles or soda in the freezer.

This appliance is not intended for use by persons (including children) with reduced physical, sensory

or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.

Do not refreeze frozen food that has thawed completely. Doing so may result in a serious health

issue. If you are throwing away your old refrigerator, make sure the CFC coolant is removed for proper

disposal by a qualified servicer. If you release CFC coolant, you may be fined or imprisoned in accordance with the relevant environmental law.

Junked or abandoned refrigerators are dangerous, even if they are sitting for only a few days. When

disposing of the refrigerator, remove the packing materials from the door or take off the doors but leave the shelves in place so that children may not easily climb inside.

If connected to a circuit protected by fuses, use time delay fuse.

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

WARNING

This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Wash hands after handling.

To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety precautions should be followed, including the following:

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

CAUTION

Installation

The refrigerator must be properly installed in accordance with the Installer Instructions that were

taped to the front of the refrigerator. Be careful when you unpack and install the refrigerator. Immediately dispose of plastic and other

packing materials out of reach of children. The appliance must be positioned for easy access to a power source.

Use

Close the door carefully when children are around.

Keep fingers out of pinch point areas; clearances between the doors and cabinets are

necessarily small. Be careful closing doors when children are nearby. If you store food improperly, be aware that it may fall and cause injury.

Do not use aerosols near the refrigerator.

Do not store articles on the top of the appliance.

Do not strike or apply excessive force to any glass surface. It may break.

Maintenance

Do not use strong detergents like wax or thinners for cleaning. Clean with a soft cloth.

Wipe foreign objects (such as dust and water) off the prongs of the power plug and contact

areas regularly. Do not store, disassemble or repair the refrigerator by yourself.

Remove any dust or foreign matter from the power plug pins.

Do not use a wet or damp cloth when cleaning the plug.

If the refrigerator is disconnected from the power supply, you should wait for at least five

minutes before plugging it back in. If you notice a chemical or burning plastic smell or see smoke, unplug the refrigerator

immediately and contact your LG Electronics Service Center.

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

To reduce the risk of fire, electric shock, or personal injury when using your product, basic safety precautions should be followed, including the following:

SAVE THESE INSTRUCTIONS

COMPONENTS

ENGLISH

COMPONENTS

Use this page to become more familiar with the parts and features of your refrigerator. *The appearance and specifications of the actual product may differ depending on the model.

Refrigerator Exterior

Button

Handle

Opens and closes the door.

Filtered Water and Ice Dispenser

Dispenses purified water and ice.

LED Display

Displays the refrigerator and freezer temperature, the water filter condition and the dispenser status.

Control Panel

Sets the refrigerator and freezer temperatures, the water filter condition and the dispenser mode.

InstaView Door-in-Door

Freezer

Preserves frozen food.

Ez Handle

Easily opens the freezer door.

LED Light

LED lights up when the freezer door is opened.

CustomChill™ Drawer

COMPONENTS

ENGLISH

Refrigerator Interior

Door-in-Door Case

A convenient storage area for frequently-used items that require easy access.

Adjustable Refrigerator Shelf

The shelves in your refrigerator are adjustable to meet your individual storage needs.

Pullout Drawer

Used for extra storage within the freezer compartment.

EasyReach™

You can store small items, or defrost an item.

Indoor Ice Bin

Ice cubes are automatically produced.

Crisper

Helps vegetables and fruits to stay crisp.

CustomChill™ Drawer

Variable temperature storage that can be set either colder or warmer than the refrigerator. The CustomChill™ drawer is not intended for long-term frozen storage.

Durabase® and Durabase® Divider

The Durabase is a storage space recommended for the preservation of large food items. The Durabase Divider is used to organize the Durabase area into sections. It can be adjusted from side to side to accommodate items of different sizes.

LED interior lamps

The interior lamps light up the inside of the refrigerator.

INSTALLATION

ENGLISH

INSTALLATION

Installation Overview

Please read the following installation instructions first after purchasing this product or transporting it to another location.

1 Unpacking your

refrigerator

2 Choosing the proper

location

3 Disassembling/Assembling

4 Connecting the water

supply and water line

5 Leveling and Door

Alignment

NOTE

Connect to potable water supply only.

INSTALLATION

ENGLISH

Specifications

The appearance and specifications listed in this manual may vary due to constant product improvements.

Bottom-freezer refrigerator model LMXS30796*

Description

French door refrigerator

Dimensions

35 3/4" (W) X 39 1/8" (D) X 70 1/4" (H). 51"(D w/ door open) 908 mm (W) X 994 mm (D) X 1785 mm (H). 1295 mm (D w/ door open)

Net weight 404 lb. (183 kg)

Bottom-freezer refrigerator model LMXC23796*

Description

French door refrigerator

Dimensions

35 3/4" (W) X 32 1/8" (D) X 70 1/4" (H). 44"(D w/ door open) 908 mm (W) X 816 mm (D) X 1785 mm (H). 1117 mm (D w/ door open)

Net weight 371 lb. (168 kg)

INSTALLATION

ENGLISH

Choosing the Proper Location

Select a place where a water supply can

be easily connected for the automatic icemaker.

Unpacking the Refrigerator

WARNING

Use two or more people to move and

install the refrigerator. Failure to do so can result in back or other injury.

Your refrigerator is heavy. When moving

the refrigerator for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it. Do not wiggle or walk the refrigerator when trying to move it, as floor damage could occur.

Keep flammable materials and vapors,

such as gasoline, away from the refrigerator. Failure to do so can result in fire, explosion, or death.

Remove tape and any temporary labels from your refrigerator before using. Do not remove any warning-type labels, the model and serial number label, or the Tech Sheet that is located under the front of the refrigerator.

To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.

Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator.

Refrigerator shelves are installed in the shipping position. Please reinstall shelves according to your individual storage needs.

The refrigerator should always be plugged

into its own individual properly grounded electrical outlet rated for 115 Volts, 60 Hz, AC only, and fused at 15 or 20 amperes. This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires. It is recommended that a separate circuit serving only this appliance be provided.

WARNING

To reduce the risk of electric shock, do not install the refrigerator in a wet or damp area.

NOTE

The water pressure must be 20~120 psi or 138~827 kPa or 1.4~8.4 kgf/cm² on models without a water filter and 40~120 psi or 276~827 kPa or 2.8~8.4 kgf/cm² on models with a water filter.

Flooring

To avoid noise and vibration, the unit must be leveled and installed on a solidly constructed floor. If required, adjust the leveling legs to compensate for unevenness of the floor. The front should be slightly higher than the rear to aid in door closing. Leveling legs can be turned easily by tipping the cabinet slightly. Turn the leveling legs to the left to raise the unit or to the right to lower it. (See Leveling and Door AlIgnment.)

NOTE

Installing on carpeting, soft tile surfaces, a platform or weakly supported structure is not recommended.

INSTALLATION

ENGLISH

Ambient Temperature

Install this appliance in an area where the temperature is between 55°F (13°C) and 110°F (43°C). If the temperature around the appliance is too low or high, cooling ability may be adversely affected.

Measuring Clearances

Too small of a distance from adjacent items may result in lowered freezing capability and increased electricity consumption charges. Allow at least 24 inches (61 cm) in front of the refrigerator to open the doors, and at least 2 inches (5.08 cm) between the back of the refrigerator and the wall.

2” (5.08 cm)

24” (61 cm)

Removing/Assembling the Refrigerator Door Handles

Removing the Handles

Loosen the set screws

with a 3/32 in.

Allen wrench and remove the handle.

Loosen the mounting fasteners that connect to the refrigerator door and handle

using a

/4 in. Allen wrench, and remove

the mounting fasteners.

Assembling the Handles

Assemble the mounting fasteners at both ends of the handle using a

/4 in.

Allen wrench.

Place the handle on the door by fitting the handle footprints over the mounting

fasteners and tightening the set screws with a 3/32 in. Allen wrench.

NOTE

When it is necessary to move the refrigerator through a narrow opening, removing the doors is the recommended procedure. If it is necessary to remove the handles, follow the directions below.

INSTALLATION

ENGLISH

WARNING

If your entrance door is too narrow for the

refrigerator to pass through, remove the refrigerator doors and move the refrigerator sideways through the doorway.

Use two or more people to remove and

install the refrigerator doors. Failure to do so can result in back or other injury.

Disconnect the electrical supply to the

refrigerator before installing. Failure to do so could result in serious injury or death.

Do not put hands, feet or other objects into

the air vents or bottom of the refrigerator. You may be injured or receive an electrical shock.

Be careful when handling the hinge and

stopper, to avoid injury. Remove food and bins before detaching the

doors and drawers.

Removing/Assembling the Doors and Drawers

When it is necessary to move the refrigerator through a narrow opening, removing the doors is the recommended procedure.

WARNING

When assembling or disassembling the handle:

Grasp the handle tightly to avoid dropping it.

Do not swing the handle into nearby people

or animals. Make sure that the bracket hole of the

handle fits properly into the stopper bolt of the door. Assemble the set screws to fix the handle into place.

Make sure that there is not a gap between

the door and handle after assembling the handle.

Removing/Assembling the Freezer Drawer Handle

Removing the Handle

Loosen the set screws located on the lower side of the handle with a

/8 in. Allen

wrench and remove the handle.

Loosen the mounting fasteners that connect to the

freezer drawer and handle using a

/4 in. Allen wrench, and remove the mounting fasteners.

Assembling the Handle

Assemble the mounting fasteners at both ends of the handle using a

/4 in. Allen

wrench.

Place the handle on the door by fitting the handle

footprints over the mounting fasteners and tightening the set screws with a 1/8 in. Allen wrench.

INSTALLATION

ENGLISH

Removing the Left Refrigerator Door

The water supply is connected to the upper right part of the rear surface of the

refrigerator. Remove the ring in the joint area. Hold the water supply connection and gently push the collet to detach the water supply line as shown in

NOTE

Detachment of the water supply line is applicable only when detaching the left refrigerator door.

Collet

Remove the screw from the hinge cover at the top of the refrigerator. Lift the hook

(not visible), located at the bottom of the front side of the cover

with a flat-head

screwdriver.

Remove the cover and pull out the tube . Disconnect all wire harnesses

. Unscrew

the ground wire

Rotate the hinge lever counterclockwise

. Lift the top hinge free of the hinge

lever latch.

CAUTION

When lifting the hinge free of the latch, be careful that the door does not fall forward.

Lift the door from the middle hinge pin and remove the door.

CAUTION

Place the door, inside facing up, on a non-scratching surface.

Hinge Lever Latch

INSTALLATION

ENGLISH

Removing the Right Refrigerator Door

Remove the top hinge cover screw . Lift the hook (not visible), located at the

bottom of the front side of the cover

with a flat-head screwdriver.

Detach the wire harnesses . Unscrew

the ground wire

CAUTION

When lifting the hinge free of the hinge lever latch, be careful that the door does not fall forward.

Hinge Lever Latch

Rotate the hinge lever clockwise. Lift the top hinge

free of the hinge

lever latch.

Lift the door from the middle hinge pin and remove the door.

CAUTION

Place the door, inside facing up, on a non-scratching surface.

INSTALLATION

ENGLISH

Install the right-side door first.

Make sure that the plastic sleeve is inserted in the bottom of the door. Lower

the door onto the middle hinge pin as shown in the figure.

Fit the hinge over the hinge lever latch and slot it into place. Rotate the lever

counterclockwise to secure the hinge.

Assembling the Right Refrigerator Door

Hinge Lever Latch

Make sure that the door-switch located inside the cover is tightly connected.

Position the cover in its place. Insert and tighten the cover screw

Connect the wire harnesses . Screw the ground wire

INSTALLATION

ENGLISH

Install the left refrigerator door after the right door is installed.

Make sure that the plastic sleeve is inserted in the bottom of the door. Install

the refrigerator door onto the middle hinge.

Fit the hinge over the hinge lever latch and slot it into place. Rotate the lever

clockwise

and fasten the hinge.

Assembling the Left Refrigerator Door

Connect all the wire harnesses.

Push the water supply tube into the hole on the top case and pull it through the

backplate.

Hold the water supply connection and gently push in the collet to connect the

water supply line as shown in

. Insert

the tube at least

/8 inch (15 mm) into the

connector.

Screw the ground wire .

Make sure

that the door-switch located inside the cover is tightly connected. Place the cover

in its position and tighten the cover

screw 3.

Collet

Hinge Lever Latch

INSTALLATION

ENGLISH

NOTE

1) Gently insert the tube until only one line shows on the tube.

(Correct)

(Incorrect)

2) Pull the tube to make sure that the tube is tightly fastened.

Collet

Tube

Insert Line

Removing the CustomChill™ Drawer

Pull the drawer open to full extension. Remove the basket by lifting the basket

from the rail system.

Hold both sides of the door and lift it to remove it from the rail system.

Disconnect the wire harness connection at the end of the right rail by pressing on

the tabs on either side. It may help to use a small, flat-blade screwdriver to apply pressure to the ends of the tabs on either side.

NOTE

Before removing the CustomChill™ drawer, it must be disconnected from the temperature control.

INSTALLATION

ENGLISH

Assembling the CustomChill™ Drawer

Grasp the door on each side and lower it into place on the rail system.

Pull the drawer open to full extension. Lower the basket onto the rail system.

Reconnect the wire harness to the connection at the end of the right rail by

aligning the two ends and pushing them together until you hear a click. The tabs should snap back into place. Tug gently to make sure the connection is secure.

Pull the freezer drawer open to full extension.

Remove the top pullout drawer by first pulling the drawer open to full extension.

On the left rail, use a flat blade screwdriver to push in on the tab to release the drawer from the rail, as shown below. Once the left side is loose, push the tab on the right side with your finger to release the drawer. Lift the front of the drawer up, then pull it straight out.

CAUTION

Use two or more people to remove and

install the freezer drawer. Failure to do so can result in back or other injury.

Do not hold the handle when removing

or replacing the drawer. The handle may come off, causing personal injury.

Be careful of sharp hinges on both sides

of the drawer. When you lay the drawer down, be

careful not to damage the floor. Do not sit or stand on the freezer drawer.

To prevent accidents, keep children and

pets away from the drawer. Do not leave the drawer open.

Removing the Freezer Drawer

NOTE

If you do not reconnect the wire harness securely, the CustomChill™ drawer will not work properly.

INSTALLATION

ENGLISH

Remove the middle drawer by pulling the drawer out to full extension. Lift the front

of the drawer up, then pull it straight out.

Remove the Durabase by opening the freezer drawer to full extension and lifting

the basket off of the rail assembly.

Remove the screws from the rails at both ends.

With both hands, grip both sides of the drawer and pull it up to remove it from the

rails.

With both hands, hold each rail and push them in simultaneously.

CAUTION

Do not hold the handle when removing or replacing the drawer. The handle may come off and it could cause personal injury.

INSTALLATION

ENGLISH

Lower the door into final position and tighten the screws located on both sides.

Insert the the top pullout drawer into the frame, and push the drawer back into place

until you hear a click.

Slightly tilt up the front of the middle drawer, insert the drawer into the frame,

and push it back into place.

Insert the lower basket in the rail assembly.

Assembling the Freezer Drawer

With both hands, pull out each rail simultaneously until both rails are fully

extended.

Grasp the drawer on each side and hook the drawer supports into the rail tabs located on

both sides.

CAUTION

Do not hold the handle when removing or replacing the drawer. The handle may come off and it could cause personal injury.

+ 47 hidden pages