LG LLDMWW0-15K902A User Manual

15W Class LED Module

User Manual

Model : LLDMWW0-15K902A

Table of Contents

································

1. Product Description

1

2. Specification ································ 2

3. LED Module Instruction Manual

································ 10

4. Applications

································ 11

5. Warranty ································ 12

6. Ordering Information ································ 13

Appendix. A. Derived Models ································ 14

Appendix. B. LED Package Properties ································ 15

A

ppendix. C. Thermal Managemen

t

································

17

Appendix. D. Module applied with asymmetry

Lens Instruction Guide

································ 21

1. Product Description



The product is a LED module used for outdoor lights which is designed to endure in

severe conditions such as, extremely high and low temperature, and highly humid

condition, even to operate in the water.

The LED Module also can be applied with 7 Variety-Lens depending on distribution type

of light in the field of outdoor light application.

 Convertor (LED Driver) is required to operate the LED module and it should be satisfied

with electrical and mechanical requirements for proper operation of the module.

Before forcing to operate the LED modules with a convertor, LED module specifications

such as, Forward Voltage and Current should be considered. Furthermore, how many LED

modules are being used, what is total voltage, what is total current and how the modules

are connected(series or parallel) should be considered to choose a proper convertor.

 Heat management of the LED module is very important since it determines the product life

time. Therefore, an optimized heatsink attached to the module is one of the essential

component for LED luminaires to ensure their proper operation. For more information,

refer to Appendix. C.

-1 -

Items Unit Specification Remarks

2. Specification

Input Current mA

Min Typ Max

DC

- 500 -

Color Temperature K 6530

± 510

LED Q’TY EA 8

Forward Volta

g

eV 24

± 10%

g

Total Luminous flux Lm 1000↑

Luminous efficiency lm/W 80 ↑

Storage Temperature ºC - 40 ~ 80

Operating Temperature ºC - 40 ~ 50

Module

Spec.

Weight g

92 ± 3%

Connector not included

Power Consumption

(VDC)

W12

± 10%

CRI Ra 70

Size mm Φ76.5 11.9T

Material - RoHS Compliance Halogen Free

Life Time hr 50,000 ↑ Warranty up to 50,000

IP - IP67

Standards -

EN 62031, 62471

UL 8750

CE, UL

◈ Models in the Appendix. A are measured to determine all values above with input current 500mA.

◈ All values above are measured by the Integrating Sphere of LG Innotek with EC1000S / WT210.

◈ All optic values are measured at 10± 2sec. in the Integrating Sphere.

◈ The Max. permitted input current putting into all models in the Appendix. A. is 650mA.

◈ CRI values can have tolerances in the range of 3% caused by Measuring Instruments.

-2 -

◆ Module Specification with Type III lens and 6500K CCT(Base Model)

Ty

pe

III L

ens

Horizontal view

Light Distribution

Vertical view

◆ Beam Angle : H 135 ° V 60°

If[mA] Luminance [lm] CCT[K] CRI

Table 1. Luminance values depending on Input Current

500 1000

6500 72

550 1055

600 1100

650(Max)

1150

All Values @ Tc = 65ºC

* Values measured by KTR, 2011.5

* All values can have tolerances in the range of 5% caused by Measuring Instruments.

KTR : Korea Testing & Research Institute (Public Approval Institution)

-3 -

◆ Module Specification with Type II lens and 6500K CCT

Ty

pe II Lens

Horizontal view

Light Distribution

Vertical view

◆ Beam Angle : H 160 ° V 70 °

If[mA] Luminance [lm] CCT[K] CRI

Table 1. Luminance values depending on Input Current

500 900

6500 72

550 950

600 990

650(Max)

1020

All Values @ Tc = 65ºC

* Values measured by KTR, 2011.5

* All values can have tolerances in the range of 5% caused by Measuring Instruments.

KTR : Korea Testing & Research Institute (Public Approval Institution)

-4 -

◆ Module Specification with Type V(Sq130°) lens and 6500K CCT

Ty

pe

V(Sq130

°

) L

ens

Horizontal view

Light Distribution

Vertical view

◆ Beam Angle : H 130 ° V 130 °

If[mA] Luminance [lm] CCT[K] CRI

Table 1. Luminance values depending on Input Current

500 1000

6500 72

550 1055

600 1100

650(Max)

1150

All Values @ Tc = 65ºC

* Values measured by KTR, 2011.5

* All values can have tolerances in the range of 5% caused by Measuring Instruments.

KTR : Korea Testing & Research Institute (Public Approval Institution)

-5 -