LG LIP-7016D, LIP-7024D Quick Manual

Fixed Feature button definition

DescriptionButton

The menu button is used to move to the desired option (Dial, MSG, Program),
and to select the next screen when indicated by an arrow on the LCD display.

Menu

Used to connect optional headset to the phone.Earphone-Jack Socket

Some flexible buttons are pre-programmed in the system for line appearances,
loop functions etc. The remaining flexible buttons can be user-programmed.

Flexible

Used to access speed dialing, speed programming, save number redial, and last
number redial.

Speed

The DND (Do Not Disturb) feature blocks all incoming calls. Wh en DND is active,
the red LED in this button is illuminated.
It is also used to activate call forward, e.g. to another station or voicemail. When
call forward is activated, the red LED flashes.

DND/Fwd

Speaker toggles the speakerphone state, and the red LED is illuminated when
the speakerphone is active.

Speaker

This button is used to put a call on hold or save information when programming.Hold/Save

Used in conjunction with fixed and flexible features, and the function changes in
relation to call progress, as indicated on the LCD display.

3 Soft
Buttons

This button is used to initiate a call transfer (TRS) or to enter programming mode
(PGM)

Trans/PGM

A station can initiate a call back request to a busy station. Once that station
becomes idle, the initiating station is signaled.

Call back

The volume button adjusts the audio levels for ringing, handset and
speakerphone functions.

Volume

Used to make a call with phonebook, which searches saved station names or
speed dial names.

Phonebook

Illuminates when the phone is ringing.Visual Ringing LED
Displays information about telephone status, dialing directories, and test

message information.

LCD Display

Microphone is used for hands-free speakerphone function.Hands-free Microphone

LIP-7016D/7024D IP Telephone Description Quick Guide

※ The number of flexible buttons may be different between LDP-7016D and LDP-7024D.

LIP Keyset User Operation

Receiving calls _ Answering a Call While Idle :

1. Lift the handset and press the flashing Flex button (as
needed), the call will be connected.

Responding to a Call While Busy

1. Press Hold/save and/or

2. Press the flashing CO line button

.

Answering Calls to Other Stations
To answer a call ringing at another station:

1. Lift the handset,

2. Dial 7 (Directed Call Pick-Up code),

3. Dial the Intercom Number of the ringing station; the

call will be connected.

To answer a call ringing at a station in your

group:

1. Lift the handset,

2. Dial 566 (Group Call Pick-Up code), the call is

connected.

Using Do-Not-Disturb (DND) to Block Incoming

Calls

To toggle DND ON and OFF:

1. Press the DND button.

Forwarding calls to another Station or Voice

Mail

To activate Call Forward from your phone to

another phone or internal system resource:

1. Lift the handset,

2. Press the Fwd Soft button,

3. Dial the type of forward code 1-9 (iPECS: 1-5)

4. Dial the destination number.

Placing Intercom calls
To place an Intercom call:

1. Lift the handset,

2. Dial the Intercom number of the desired station,

3. On answer or Splash tone, speak to the called party.

Using Camp-On when calling a busy station
To Camp-On (wait off-hook) for a busy station:

1. Press * and wait an answer.

Using Last Number Redial (LNR)
To dial the Last Number for an external call:

1. Lift the handset,

2. Select the Redial Soft button,

3. Press ▼ volume ▲ to select from the last 10

numbers dialed,

4. Press the Send Soft button or hold/save.

Using System Speed Dial Numbers
To place a call using System Speed Dial:

1. Lift the handset,

2. Press the Speed button,

3. Dial the desired System Speed Dial bin number

Using and Entering Station Speed Dial

Numbers

To place a call using Station Speed Dial:

1. Lift the handset,

2. Press Speed,

3. Dial the desired Station Speed Dial bin number

To enter a Station Speed Dial number with CO

Line and Name:

1. Press Trans/Pgm,

2. Press speed,

3. Dial the desired Station Speed Dial bin number,

4. Select/dial the CO line/group,

5. Dial the desired number to be stored,

6. Press hold/Save,

7. Enter the associated name if desired, using the

alpha-numeric entry chart,

8. Press hold/Save.

To assign a Station Speed Dial number directly

to a Flex button:

1. Press Trans/pgm,

2. Press the desired Flex button,

3. Select the Tel Num Soft button,

4. Select/dial the CO line/group,

5. Dial the desired number,

6. Press hold/Save,

7. Enter the associated name if desired, using the

Character Entry chart,

8. Press hold/Save.

ACNR: To retry a busy external number until

answered

To set up an ACNR, while on an outgoing call:

1. Use the Navigation button to display the next menu
and select the ACNR Soft button,

2. Hang-up handset.

To cancel the ACNR request:

1. Press the ACNR Soft button.

Call Transfer: Sending a call to a different

destination

To Transfer an active call:

1. Press Trans/pgm,

2. Call receiving party,

3. Hang-up with or without announcement.

Call Hold: Placing a call in a waiting state
To place a call on Hold:

1. Press Hold/save.

Joining Multiple People in a Conference
To establish a Conference:

1. Establish call with one of the desired conference
parties,

2. Select the Conf Soft button,

3. Establish call with the other conference party,

4. Select the Conf Soft button,

5. Select the Conf Soft button again to establish the

conference.

To place a Conference on Hold:

1. Press the hold/save button.

To retrieve the Conference:

1. Select the Conf Soft button.

To make an External-parties-only Conference:

1. Establish conference with two external parties,

2. Select the Conf Soft button to exit.

To enter pre-opened Conference Room:

1. Dial 5 7 X (iPECS: 5 9 X) when X is the conference
room number.