LG LHB975 Owner’s Manual

i _iiixila

iiii i

i i

Life's Good

x iiii

OWNER'S

WiFi Network Blu-ray Disc TM

Home Theater System

Please read this manual carefully before operating

your set and retain it for future reference.

MODEL
LHB975

P/NO : MFL63740442

HB965PZT-AD.BUSALL_OM.indd 1 2010-02-24 &_,E/_ 2:32:20

www.lgusa.com

2 Safety Information

1

t0

,<

Safety Information

F

CAUTION

o

CAUTION: TOREDUCETHERISKOFELECTRIC

SHOCKDO NOTREMOVECOVER(ORBACK)NO

USER-SERVICEABLEPARTSINSIDEREFERSERVICING

TOQUALIFIEDSERVICEPERSONNEL.

This lightning flash with arrowhead
symbol within an equilateral

triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the

product's enclosure that may be of
sufficient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an
equilateral triangle is intended

to alert the user to the presence
of important operating and

maintenance (servicing)
instructions in the literature

accompanying the product.

Cautions and Warnings

WARNING: TO PREVENT FIREOR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSETHIS PRODUCTTO RAIN

OR MOISTURE.
WARNING: Do not install this equipment in a

confined space such as a book case or similar unit.

CLASS1 LASERP_ODUCr
K_SSS1 LASS_PRO_UKI

LUOKAN1 LASERLAIRS
K_SS 1 _SS_ APPARA_

CLASSSl_£OaUlr LASER

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer's

instructions.
Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the
product and to protect it from over heating.The

openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar

surface.This product shall not be placed in a built-
in installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer's
instruction has been adhered to.

CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read

this owner's manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.

Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try
to open the enclosure.Visible laser radiation when

open. DO NOT STARE INTO BEAM.

HB965PZT-AD.BUSALL_OM.indd 2 2010-02-24 &AE/_,2:32:32

Safety Information 3

CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a

dedicated circuit;
That is, a single outlet circuit which powers only

that appliance and has no additional outlets or
branch circuits. Check the specification page of this

owner's manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged

wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.

Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your

appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the

appliance, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical

abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention

to plugs, wall outlets, and the point where the cord
exits the appliance.To disconnect power from the
mains, pull out the mains cord plug.When installing

the product, ensure that the plug is easily accessible.
CAUTION:The apparatus shall not be exposed to

water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.

This device is equipped with a portable battery or
accumulator.

Safety way to remove the battery or the battery
from the equipment: Remove the old battery

or battery pack, follow the steps in reverse order
than the assembly.To prevent contamination of
the environment and bring on possible threat

to human and animal health, the old battery or
the battery put it in the appropriate container at

designated collection points. Do not dispose of
batteries or battery together with other waste.
It is recommended that you use local, flee

reimbursement systems batteries and accumulators.
The battery shall not be exposed to excessive heat

such as sunshine, fire or the like.

FCC Compliance Statement

This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and

(2) This device must accept any interference received,

including interference that may cause undesired

operation.

NOTE:This equipment has been tested and found

to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules.These limits are

designed to provide reasonable protection against

harmful interference in a residential installation.This

equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However,

there is no guarantee that interference will not occur

in a particular installation.
If this equipment does cause harmful interference

to radio or television reception, which can be
determined by turning the equipment off and

on, the user is encouraged to try to correct the

interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment
and receiver.

• Connect the equipment into an outlet on a
circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV
technician for help.

CAUTION :Any changes or modifications not
expressly approved by the party responsible for

compliance could void the user's authority to
operate this equipment.

th

o

HB965PZT-AD.BUSALL_OM.indd 3 2010-02-24 &_,E/_,2:32:32

4 Safety Information

FCC RF Radiation Exposure Statement :This

equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment.

This equipment should be installed and operated
with minimum distance 20 cm (7.9 inch) between

the radiator and your body. End users must follow

co

the specific operating instructions for satisfying RF
exposure compliance. This transmitter must not be

,<

coqocated or operating in conjunction with any
other antenna or transmitter.

CAUTION: Regulations of the FCC and FAA prohibit

_4

airborne operation of radio-frequency wireless

o

devices because their signals could interfere with
critical aircraft instruments.

Responsible Party :

LG Electronics USA, Inc.

1000 Sylvan Avenue
Englewood Cliffs, NJ 07632

TEL. :+ 1-800-243-0000

Notes on Copyrights

• Because AACS (Advanced Access Content System)
is approved as content protection system for BD

format, similar to use of CSS (Content Scramble

System) for DVD format, certain restrictions are
imposed on playback, analog signal output, etc.,

of AACS protected contents. The operation of this

product and restrictions on this product may vary

depending on your time of purchase as those

restrictions may be adopted and/or changed by

AACS after the production of this product.

• Furthermore, BD-ROM Markand BD+ are

additionally used as content protection systems
for BD format, which imposes certain restrictions

including playback restrictions for BD-ROM
Mark and/or BD+ protected contents. To obtain

additional information on AACS, BD-ROM Mark,

BD+, or this product, please contact an authorized

Customer Service Center.

• Many BD-ROM/DVD discs are encoded with

copy protection. Because of this, you should only
connect your player directly to your TV, not to a

VCR. Connecting to a VCR results in a distorted

picture from copy-protected discs.

• This product incorporates copyright protection

technology that is protected by U.S. patents
and other intellectual property rights. Use of

this copyright protection technology must be
authorized by Macrovision, and is intended for

home and other limited viewing uses only unless

otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.

• Under the U.S. Copyright Jaws and Copyright
Jaws of other countries, unauthorized recording,

use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs

and other materials may subject you to civil and/
or criminal liability.

HB965PZT-AD.BUSALL_OMindd 4 2010-02-24 ?,_,E/_,2:32:32

Safety Information 5

IMPORTANT SAFETY
INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Followall instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has
two blades with one wider than the other. A

grounding type plug has two blades and a third
grounding prong.The wide blade or the third

prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an

electrician Forreplacement of the obsolete outlet.

10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience

receptacles, and the point where they exit from
the apparatus.

11. Only use attachments/accessories specified by
the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with

the apparatus.When a cart is used, use caution
when moving the cart/apparatus combination to

avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or
when unused for long periods of time.

14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has

been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.

to

F

o

HB965PZT-AD.BUSALL_OM.indd 5 2010-02-24 &AE/_,2:32:32

Contents

1

Safely Informafion

2 Cautions and Warnings
5 IMPORTANT SAFETY

INSTRUCTIONS

Preparation

8 Introduction
8 About the "(_" Symbol

Display

S Symbols Used in this

Manual

9 Supplied Accessories

9 Playable Discs
11 File compatibility
12 Regional Code

12 AVCHD (Advanced Video

Codec High Definition)

12 Certain System

Requirements
12 Compatibility Notes
13 Remote control

14 Front panel
15 Rear panel

16 Assemble the front speakers
18 Mounting the speakers to a wall

19 Speaker Connection
19 Attaching the speakers to

the player

19 Wireless speakers

connection

21 Positioning the system

22 Connecting fo Your TV

22 HDMI Connection
23 What is SIMPLINK?

24 Component Video

Connection

24 Video Connection
25 Resolution Setting

25 Antenna connection
26 Connections with external device

26 AUX Connection
26 PORT. IN connection

27 OPTICAL IN 1/2 connection
27 HDMI IN 1/2 connection

28 Connecting to your Home Network

28 Wired network connection
29 Wired Network Setup

30 Wireless Network

Connection

31 Wireless Network Setup
34 USB device connection

36 Settings
36 Adjust the Setup Settings

36 [DISPLAY] Menu
38 [LANGUAGE] Menu

38 [AUDIO] Menu
39 [LOCK] Menu

40 [NETWORK] Menu

HB965PZT-AD.BUSALL_OM.indd 6 2010-02-24 _,_,E/_ 2:32:32

41 [OTHERS] Menu
43 Sound Effect

4

Operation

44 General Playback
46 Advanced Playback

49 On-Screen display
52 Enjoying BD-LIVE

53 Playing a movie file and VR disc
55 Viewing a photo

57 Listening to music
60 Playing the iPod
62 Radio Operations

63 Playing content via your home

network

68 Using NefCasf TM Entertainment

Access

68 Using Netflix
71 VUDU
74 CinemaNow

78 YouTube TM

81 Enjoying Pandora internet

radio

84 Picasa TM Web Albums

87 Using the AccuWeather

6

Troubleshooting

90 General
91 Picture
91 Sound

92 Network

7

Appendix

93 Controlling a TV with the supplied

remote control

94 Area Code List
95 Language code List

96 Network Software Update
96 Network update notification
96 Software Update

98 Video output resolution

99 Trademarks and Licenses
101 Specifications
103 Important Information Relating to

Network Services

104 Open source software notice
105 Gracenofe ®End User License

Agreement

8

Warranty

106 Warranty

89 Notes on Discs
89 Handling the Unit

HB965PZT-AD.BUSALL_OM.indd 7 2010-02-24 ?,_,E/_ 2:32:32

8 Preparation

2

Preparation

Introduction

About the "®" Symbol Display

"®"may appear on yourTV display during

operation and indicates that the function
explained in this owner's manual is not

available on that specific media.

Symbols Used in this Manual

NOTE

Indicates specialnotes and operating features.

CAUTION

Indicates cautions for preventing possible

damages from abuse.

A section whose title hasone of tile following
symbols areapplicable only to the disc

represented bythe symbol.

I:]D]

I ID_V4D]

I r:\V['lll,]

I r:T,ID]

JLv_[,lvlI=1

_Lv_Ll_'J[,I
i',,1:[,)I[,]

BD-ROMdisc
DVD-Video,DVD±R/RWin

Video mode or VRmode
and finalized

DVD±R/RWin AVCHD
format

Audio CDs
Movie files
Music files

Photo files

HB965PZT-AD.BUSALL_OM.indd 8 2010-02-24 &_,E/_,2:32:32

Preparation 9

Supplied Accessories

Videocable (1)

Color<oded Speaker
Cables(S)

[

Remote control (1)

FMarlterlna (1)

Nero MediaHome4
Essentials software

CD-ROM (1)

Mounting Brackets
(Wall/Speaker) (2)

Batteries(2)

AM anterma (1)

Wirelessrear speaker
receiver(1)

Screws/Wall plugs
(for mounting to a

wall) (4)

Playable Discs

8/_,.r_yo,-sc- Discssuch asmoviesthat carl

..... 8/ 12cm (3.2/4.7 inches) disc

DVD_R aJSO

.............. 8 / 12cm (3.2/4.7 inches) disc

............ 8 / 12cm (3.2/4.7 inches) disc

Blu-rayDisc

be purchased or rented.
BD-R/REdiscs that contain,
Movie, Musicor Photo files.

DVD-VIDEO
Discssuch asmovies that carl be

purchasedor rented.
DVD±R

8/ 12cm (3.2/4.7 inches) disc

Video mode and finalized only

Supports the dual layer disc

FinalizedAVCHDformat
DVD±Rdiscsthat contain
Movie, Musicor Photo files

DVD-RW

RW

8/ 12cm (3.2/4.7 inches) disc

VRmode,Video mode and

finalizedonly
FinalizedAVCHDformat

DVD-RWdiscsthat contain
Movie, Musicor Photo files.

DVD+RW

Video mode and finalized only

AVCHDformat
FinalizedAVCHDformat
DVD+RWdiscs that contain
Movie, Musicor Photo files.

6"

°_...... _° 8/ 12cm (3.2/4.7 inches) disc

HB965PZT-AD.BUSALL_OMindd 9 2010-02-24 ?,A,E/_,2:32:33

CD-R/Rw

CD-R/RWdiscsthat contain
audio titles, Movie, Musicor

Photo files.

10 Preparation

qJ

HB965PZT-AD.BUSALL_OM.indd 10 2010-02-24 &_,E/_ 2:32:34

File compatibility

Overall

Available Fileextensions:
"jpg","j peg",%png",%avi",%divx",%rnpg",%mpeg","

.mkv",'tm p4",'tmp3",'twma",'twav"

Available file extensions differ depending
on the DLNA servers.

Some"wav"files are not supported on this

player.

The file name is limited to 180characters.

Depending on tile sizeand number of tile

files,it maytake severalminutes to readthe
contents on the media.

Maximum Files/Folder: Lessthan 2000(total
number of files and folders)
CD-R/RW, DVD_+R/RW,BD-R/REFormat:
ISO9660+JOLIET,UDFand UDFBridgeformat

Video files
Available resolution size:

1920x 1080(Wx H)pixels

Playable subtitle: SubRip(.srt/.txt), SAMI
(.smi),SubStation Alpha (.ssa/.txt),MicroDVD

(.sub/.txt),VobSub (.sub),SubViewer 1.0(.sub),
SubViewer2.0 (.sub/.txt),TMPlayer(.txt),DVD
Subtitle System(.txt)

VobSub (.sub)is not available intile

[Home Link] feature.

Playable Codec format: "DIVX3.xx","DIVX4.
xx","DIVXS.xx","XVID", "DIVX6.xx"(Standard

playback only), H.264/MPEG4AVC,MPEG1SS,
MPEG2PS,MPEG2TS

Playable Audio format: "Dolby Digital","DTS",
"MP3","WMA","AAC","AC3"

Not alltile WMA and AACAudio format is

compatible with this unit

Sampling frequency:
within 32 kHzto 48 kHz(WMA),
within 16 kHzto 48 kHz(MP3)

Bit rate:
within 20 kbpsto 320 kbps(WMA),

within 32 kbpsto 320 kbps(MP3)

Preparation 11

6"

Audio files

Sampling frequency:

within 8 kHzto 48 KHz(WMA),
within 11kHzto48 kHz(MP3)

Bit rate:
within 8 kbps to 320 kbps (WMA,MP3)

Photo files

Recommended size:

Lessthan 4,000x 3,000x24 bit/pixel

Lessthan 3,000x 3,000x32 bit/pixel

Progressiveand Iosslesscompression photo
image filesare not supported.

HB965PZT-AD.BUSALL_OM.indd 11 2010-02-24 &AE/_ 2:32:34

12 Preparation

Regional Code

This unit hasa regional code printed on the

rearof the unit. Thisunit carl play only BD-ROM

or DVDdiscs labeled sameastile rearof the

unit or "ALL't

AVCHD (Advanced Video Codec
High Definition)

q]

This playercarl playbackAVCHDformat

discs.Thesediscsare normally recordedand
usedin camcorders.

The AVCHDformat is a high definition

digital video cameraformat.

The MPEG4 AVC/H.264format iscapable

of compressing images at higher eMciency
than that of the conventional image
compressing format.

SomeAVCHDdiscs use the"x.v.Color"
format.

This playercarl playbackAVCHDdiscs using

"x.v.Color"format.
SomeAVCHDformat discsmay not play,

depending on the recording condition.
AVCHDformat discsneed to befinalized.

"x.v.Color"offersawider color range than
normal DVDcamcorder discs.

Certain System Requirements

Forhigh definition video playback:

High definition display that has

COMPONENTor HDMIinput jacks.

BD-ROMdiscwith high definition content.
HDMIor HDCPcapable DVIinput on your

display device is requiredfor some content

(asspecified bydisc authors).
Forup-conversion of standard definition

DVD,a HDMIor HDCPcapable DVIinput

on your display device isrequired for copy

protected content.

Compatibility Notes

BecauseBD-ROMisa new format,

certain disc, digital connection and other
compatibility issuesare possible. Ifyou

experience compatibility problems, please
contact an authorized Customer Service

Center.
Viewing high-definition content and up-

converting standard DVDcontent may

require aHDMl<apable input or HDCP-

capable DVIinput on your display device.

Some BD-ROMand DVDdiscsmay restrict
the useof some operation commands or
features.

You carl usea USBdevice that is used
to store somedisc related information,

including downloaded omline content. The
disc you are using will control how long this

information isretained.

HB965PZT-AD.BUSALL_OM.indd 12 2010-02-24 &_,E/_,2:32:34

Remote control

s"

H

s"

!]

El

i"

l]

Remove the battery cover
on the rear o[ the Remote

Control, and insert two R03
(size AAA) batteries with 0
and O matched correctly.

• • • • • •Ell • • • • • •

(POWER):Switches the

playerON or OFR

OPEN/CLOSE:Opensand

closestile disc tray.
RADIO&INPUT: Changesinput

mode.
0-9 numerical buttons:

Selectsnumbered options in a
menu.

CLEAR:Removesa mark on
tile searchmenu ora number

when setting the password.
REPEAT:Repeatsa desired

section or sequence.

• • • • • • []• • • • • •

_1_1/1_1_SCAN:Searches
backward or forward.

I_1_111_1_1SKIP:Goesto the
next or previous chapter / track

/file.

• (STOP): Stops playback.

• (PLAY): Starts playback.
II (PAUSE): Pauses playback

SPEAKER LEVEL: Sets the
sound level of desired speaker.

SOUND EFFECT: Selects a
sound effect mode.

VOL +/- : Adjusts speaker

volume.
OPTICAL:Changesinput

mode to optical directly.
MUTE: Mute the unit.

Preparation 13

HOME: Displaysor exits the

[Home Menu].
MUSICID: When connected

to the network, carl provide
information about tile current

songwhile movie playback.

0 INFOIDISPLAY:Displaysor

exitsOn-Screen Display.
Direction buttons: Selectsan

option in the menu.

_) ENTER:Acknowledges

menu selection.

RETURN:Exitsthe menu

or resumes playback.

TITLE/POP-UP: Displaystile

DVDtitle menu or BD-ROM's
pop-up menu, if available.

DISCMENU: Accessesmenu
on a disc.

Colored (R, G,Y, B) buttons:
Useto navigate on menus.

Bbutton: Selectsmono/stereo
in FM mode.

MARKER:Marks any point
during playback.

SEARCH:Displaysor exits the
searchmenu.

SLEEP:Setsa certain period of
time after which the unit will

switch to off.

• REC:Recordsan audio CD.

TV Control Buttons: See page

g3.

-e

6"

HB965PZT-AD.BUSALL_OM.indd 13 2010-02-24 &_,E/S,2:32:34

14 Preparation

Front panel

H n m n [] [] []

__

[] (b/I (POWER)Button
[] DiscTray

[] iPod Dock
] Remote sensor

[] Displaywindow
[] Volume control
[] -_ (OPEN/CLOSE)

[] PORT.IN

m

[] USBPort
[] Operation buttons

,/l! (PLAY/PAUSE)

• (STOP)
I_/I_1 (SKIP)
F(Function)

Changes the input source or function.

HB965PZT-AD.BUSALL_OM.indd 14 2010-02-24 &A,E/_,2:32:35

Rear panel

H [] [] _[] []

Preparation 15

[] AC Powercord

Pluginto the power source.

[] Speakersconnectors
[] Cooling Fan

[] Ar_ter_naConnector
[] VIDEOOUT

[] Wirelesstransmitter
[] AUX (L/R)INPUT

roD• [] m_

[] COMPONENTVIDEO(Y PBPR)

OUTPUT(PROGRESSIVESCAN)
[] OPTICALIN I(TV) / 2
[] HDMI IN(type A,Version 1.3) 1/2

[] HDMIOUT(type A,Version 1.3)

Connect to TV with HDMI inputs.
[] LAN port

6"

HB965PZT-ADBUSALL_OMindd 15 2010-02-24 ?,_,E/_,2:32:35

16 installation

3

Installation

Assemble the front
speakers

F

o

I

Speaker

_ Screw

I.Attach the pole to tile base,then securetile

connection with asupplied screw.

Pole

Cable

2. Insert aspeakerwire from tile bottom of
the base.

Base

HB965PZT-AD.BUSALL_OM.indd 16 2010-02-24 &AE/_ 2:32:35

installation 17

3. Draw the speaker wire through the inside of
the pole and alsothrough tile hole on tile

bottom of the speaker.

1[

_j _i ¸

4. Attach the speaker to the pole, then secure
the connection with a supplied screw.

5. Connect the speakerwire to the terminal
on tile speaker.

Make surethe wire marked blackgoes in
to the terminal marked"-"(minus) and the

other wire goes in to the terminal marked
"+"(plus).

7

o

HB965PZT-AD.BUSALL_OM.indd 17 2010-02-24 &A,E/_,2:32:35

18 Installation

Mounting the

speakers to a wall

You carl mount tile speakersto awall. Prepare

screwsand brackets supplied.
I.Attach tile wall bracket to the wall with

screwsasshown in the illustration below.
When you mount to awall(concrete), use

the wall plugs.Youshould drill some holes
(Diameter:6 mm, Depth: more than 32 ram)
fortile mounting.

F

o

3,5 mm (0.14 inch)

I I

20 mm (0.79 inch)

mm (0.24 inch)

I, ,I

32 mm (1.3 inch)

2. Attach the speaker bracket to the speaker
and fasten the screws.

m

3. Hang the speaker bracket onto the wall

bracket.

4. Pressthe speakerto securethe brackets.

HB965PZT-AD.BUSALL_OM.indd 18 2010-02-24 &AE/_ 2:32:36

installation 19

Speaker Connection

Attaching the speakers to the

player

I.Connect speakerwires to tile main unit.

Eachspeakerwire iscolor-coded. Use
matching color wiresfor corresponding

speakers.

Color Speaker Position
Green Center Center

Red Front Front right
White Front Front left

2. Connect speakerwiresto tile wireless
receiver.Usethe same method for

connecting rearspeakersto tile wireless

receiverunit.

Wireless speakers connection

Subwoofer connection

The wirelesssubwoofer makes setup simple,
too there areno cables to connect. When you

turn on the unit and subwoofer the corlrlection
will be completed automatically.

You carl set up wirelesscorlrlection manually,
when your connection is not completed.

Case I :If the wireless corlrlection indicator
will blink, pressand hold • (STOP)on the front

panel and then MUTEbutton on the remote

control.

"REMATE"willbe displayed.

Case 2 :If the wireless conrlection indicator
will red,press and hold • (STOP)on tile front

panel and then MUTEbutton on the remote

control.

"REMATE"willbe displayed.

Disconnect and connect the power cord of the
subwoofer to tile wall outlet. If tile indicator on

subwoofer is blue, the connection is

completed

7
F

o

HB965PZT-AD.BUSALL_OM.indd 19 2010-02-24 &AE/_ 2:32:36

20 Installation

LED indicator of wireless receiver

LED Color Operation

Blue The wireless receiver is

receiving the signal of the
wireless transmitter.

Red The Wireless Receiver is in

standby mode.

Off (No The Wireless Receiver is
display) turned off.

Initial setting an ID of wireless
receiver

1. Connect tile WirelessReceiverand tile rear
speaker(right, left) with tile speaker cables.

2. Carlnect tile power cord of tile Wireless

o

Receiverto the outlet.

3, Turn on tile main unit and Wireless

Receiver:The main unit and wireless
receiverwill be automatically connected.

'O"appears in display window.

Setting an ID of wireless receiver

When tile unit is manufactured, the ID is
already set. If an interference occursor you

_h_
s_

useanew wireless receiver,an ID should be set

again.

1. Turn on tile main unit and turn offthe
wirelessreceiver.

2. Pressand hold • (STOP)on the front of unit
and MUTEon tile remote control.'REMATE"

appearsin display window.

3. Turn on the WirelessReceiver.A new IDis
set.

HB965PZT-AD.BUSALL_OM.indd 20 2010-02-24 &_,E/_,2:32:36

Installation 21

About Ferrite Core (for EMI only)
Be sure to attach tile ferrite core to tile speaker

cable (for connectirlg to this unit and wireless
receiver). This ferrite core carl red uce noises.

How to attach the ferrite core

1. Pressthe stopper [a] of the ferrite core to
open.

2. Wind the speaker cables once on tile ferrite
core.

3. Close tile ferrite core until it clicks.

Refer to the fig.3 and comment.

1

[a]

2

Rear of wireless
receiver

(fig .3)

length

Positioning the system

The following illustration shows an example
of positioning tile system.Note that tile

illustrations in these instructions differ from the

actual unit forexplanation purposes.

Fortile best possible surround sound,all the
speakersother than the subwoofer should be
placed at tile samedistance from tile listening

position (@).

7
F

o

@ Front left speaker (L)/

® Front right speaker (R):

Place the front speakers to the sides of the
monitor or screen and as flush with the screen

surface as possible.

© Center speaker:
Placethe center speakerabove or below the

monitor or screen.
@ Surround left speaker (L)/

@ Surround right speaker (R):
Placethese speakers behind your listening
position, facing slightly inwards.

® Subwoofer:

The position of the subwoofer isnot so
critical, because low basssounds arenot

highly directional. But it is better to place

the subwoofer near the front speakers.Turn

it slightly toward the center of tile room to
reduce tile wall reflections.

@ Unit

HB965PZT-AD.BUSALL_OM.indd 21 2010-02-24 &AE/_ 2:32:36

22 Installation

Connecting to Your TV

Makeone of tile following cormections,
depending on the capabilities of your existing
equipment

HDMIconnection (pages 22-23)
Component Video connection (page 24)

Video connection (page 24)

g

o

HDMI Connection

Ifyou [lave a HDMITVor monitor, you

carl connect it to this player using a HDMI
cable(TypeA, Version 1.3).Connect tile HDMI

OUTjack on tile playerto the HDMI INjack on
a HDMIcompatible TVor monitor.

Player

TV

Setthe TV'ssource to HDMI(referto TV's
Owner's manual).

HB965PZT-AD.BUSALL_OM.indd 22 2010-02-24 &b,E/_,2:32:37

Installation 23

What is SIMPLINK?

Or-_

_IITIPLInK

Some functions of this unit are controlled by

the TV's remote control when this unit and LG
TV's with SIMPLINK are connected through

HDMI connection.

Controllable functions by LGTV's remote
control; Play, Pause, Scan, Skip, Stop, Power Off,

etc.

Refer to tile TV owner's manual for tile details

of SIMPLINK function.

LGTV's with SIMPLINK function has tile logo as
shown above.

7

F

o

HB965PZT-AD.BUSALL_OM.indd 23 2010-02-24 &AEA 2:32:38

24 Installation

Component Video Connection

Connect the COMPONENTVIDEO OUTjacks on
the player to the corresponding input jacks on

the TV using Y Pb Prcables. You carl hear the

sound tile through tile system's speaker.

Player

F

o

TV

Green
Blue

Red

Video Connection

Connect theVIDEOOUTjackon the playerto
tile video injack on theTV using a video cable.

You carl hearthe sound through the system's
speakers.

Player

_]]]][]3:_D Yellow

TV

HB965PZT-AD.BUSALL_OM.indd 24 2010-02-24 &AE/_ 2:32:38

Installation 25

Resolution Setting

Tile player provides severaloutput resolutions
for HDMI OUTandCOMPONENTVIDEOOUT

jacks.You car] change the resolution using

[Setup] menu.

1. PressHOME('tb).

2. Use</> to select tile [Setup] and press
ENTER.Tile [Setup] menu appears.

3. Use A/V tO select [DISPLAY] option then
press > to move to the second level.

4. UseA/V tOselect tile [Resolution] option

then pressENTERor > to move to tile third

level.

Antenna connection

Connect the supplied anterma for listening to
the radio.

7

F

o

D

5. Use A/V to select tile desired resolution

then press ENTERto confirm your selection

@
@

HB965PZT-AD.BUSALL_OM.indd 25 2010-02-24 &AE/_ 2:32:39

26 installation

Connections with
external device

AUX Connection

You carl enjoy the sound of your component
with the analog audio outputjacks from the

speakersof tile system.

Connect tile analog audio output jacks of
your component into the AUX L/R (INPUT)on
this unit. And then select tile [AUX]option by

pressing RADIO&INPUTandENTER.

F

You carl alsouse Fbutton on the front panel to

o

selectthe input mode.

Player

PORT. IN connection

You carl enjoy tile sound of your portable
audio playerfrom tile speakersof the system.

Connect the headphones (or line out )jack of
tile portable audio playerinto the PORT.IN

of this unit. And then selecttile [PORTABLE]
option by pressing RADIO&INPUTandENTER.

You carl alsouse Fbutton on tile front panel to
select the input mode.

Red

White

To the audio output jacks
of your component
(TV, VCR, etc.)

HB965PZT-AD.BUSALL_OM.Jndd 26 2010-02-24 &AE/_ 2:32:40

MP3 player, etc...

Installation 27

OPTICAL IN 1/2

connection

You carl enjoy the sound of your component
with the digital optical corlrlection from the

speakersof the system.
Connect theoptical output jack of your

component into the OPTICALIN112jacks on
tile unit. And then selectthe [OPTICAL]option

by pressing RADIO&INPUTand ENTER.Or press
OPTICALto selectdirectly.

You carl also useF button on tile front panel to
select the input mode.

HDMI IN 1/2 connection

You carl enjoy the pictures and sound of your
component with this cor_r_ection.

Connect the HDMIOUTjack of your
component into the HDMI IN 1or 2jack on this

unit. And then select the [HDMI IN 1/2] option
by pressing RADIO&INPUTandENTER.

You can alsouse Fbutton on the front panel to

selectthe input mode.

7

o

To the HDMI OUT jack

of your component
(set-top box, digital
satellite receiver,

video game machine,
etc.)

To the digital
optical output jack
of your component

HB965PZT-AD.BUSALL_OM.indd 27 2010-02-24 &_,E/_,2:32:40

..d

28 Installation

Connecting to your

Home Network

This player carl be connected to a local area

network (LAN) via tile LAN port on the rear
panel or tile internal wireless module.
By corlnecting tile unit to a broadband home
network, you have access to services such

as software updates, Home Link, BD-LIVE

interactivity and streaming services.

Wired network connection

Usinga wired network provides the best
performance, becausethe attached devices

o

connect directly to the network and are not

subject to radio frequency interference.
Pleasereferto the documentation for your

network device forfurther instructions.

Connect tile player'sLANport to the
corresponding port on your Modem or Router

using acommercially available LANor Ethernet

cable (CAT5or better with RJ45connector).

Inthe example configuration for wired

connection below, this player would be able to
accesscontent from either of tile PCs.

Router

_ pc

Player

HB965PZT-AD.BUSALL_OM.indd 28 2010-02-24 &_,E/_,2:32:41

Installation 29

Wired Network Setup

Beforesetting the wired network, you need to
connect tile broadband intemet to your home

network.
Ifthere isa DHCPserveron tile local area

network (LAN)via wired connection, this player
will automatically be allocated an IPaddress.

After making tile physicalconnection, a small
number of home networks may require the
player'snetwork setting to be adjusted. Adjust
tile [NETWORK]setting asfollow.

1. Select[Corlrlection Setting] option in tile
[Setup] menu then pressENTER.

2. Tile [Connection Setting] menu appear on
the screen. UseA/V to select tile [Wired]

and pressENTER.

4. Use A/V/</> to select the IP mode

between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
addressautomatically.

5.Select [OK]and press ENTERto apply
network settings.

6. Tile playerwill askyou to test tile network
connection. Select [OK]and pressENTERto

cornplete tile network con nection.

7
F

o

D

3. Selects [Yes]and pressENTERto continue.
The new connection setting resetsthe
current network settings.

HB965PZT-AD.BUSALL_OM.indd 29 2010-02-24 &AE/_ 2:32:41

30 installation

7. If you select [Test] and press ENTERat step
5 above, tile network corlrlection status is

displayed on the screen.
You carl also test it on the [Connectiorl

Status] in the [Setup] menu.

Wireless Network Connection

F

Another corlrlection option is to usean Access

o

Point or awireless router. Inthe example

configuration for wirelessconnection below,
this playerwould be able to accesscontent
from either of the PCs.

Wireless

Communication

Broadband

Service

Tile network configuration and connection

method may vary depending on the
equipment in use and the network
environ ment.

This player is equipped with an IEEE802.11n

(2.4GHzband only) wireless module, which
also supports tile 802.11b/g standards.Fortile

best wireless performance, we recommend

using a IEEE802.1In certified Wi-Finetwork

(accesspoint or wirelessrouter).
AvailableWiFi standards:

802.11b/802.1 lg /

802.1In (single-band 2.4GHz)

Refer to tile setup instructions supplied with
your access point or wireless router for detailed
connection steps and network settings.

@

HB965PZT-AD.BUSALL_OM.indd 30 2010-02-24 &AE/_ 2:32:41