LG LGHBS730BLK, HBS-730.ACUSMTK User manual

HBS-730 User Manual

BLUETOOTH® Stereo Headset

Note: Please read all information carefully prior to

using HBS-730 in order to prevent damages to the

product and to enjoy the best performance.

This product contains chemicals known to the State

of California to cause cancer and birth defects or

English

Español

All rights reserved.

LG Electronics Inc., 2012

reproductive harm.

Wash hands after handling.

Rev 5.0 US

WARNING :

ENG

2

Table of Contents

Introduction 3

- Included in the package 3
Description of Parts 4
How to Use 4

- Wearing 4

- Power On / Power Off 5

- Charging 5

- Low Battery 5

- Battery Status Alert 5

- Pairing 5

- Multi-connection 6

- Auto Reconnect 7

- Calling 7

• Answering a call 7

• Transferring a call 7

• Voice dialing 8

• Last number redial 8

• Ending a call 8

• Call waiting 8

• Rejecting a call 8

• Mic mute 8

- Volume Control 8

- Audio Streaming 8

- Equalizer 9

- aptX® 9

- SMS reader 9
Summary of Button Functions 10
LED Indication 11
Troubleshooting 11
Specification 12
Precautions 12
Declaration of Confirmation 13
Additional Information 13
Limited Warranty 16
Important Safety Information 16

Introduction

The LG TONE+TM (HBS-730) is a light weight wireless headset that uses Bluetooth®
technology.
This product can be used as an audio accessory for devices supporting either the
A2DP or Hands-Free Bluetooth Prole.

Included in the Package

ENG

HBS-730

Ear Gels (2 Sets) *Charger

User Manual Warranty Card Quick Start Guide

* Actual product design may differ from images shown on manual.

3

Description of Parts

Headset

ENG

Memory Flex Neck
Strap

REW Button
FF Button

PLAY / PAUSE /
STOP Button

Earbud (R)

How to Use

Wearing

4

Charging Port

Power Switch

VOLUME UP Button

VOLUME DOWN Button

CALL Button,
LED Indicator

Microphone

Earbud (L)

How to Use

Power On / Power Off

- Slide the power switch to the ON or OFF position.

Charging

- When the charger is connected (with the power on or off) the headset will turn off.

- While charging, the LED indicator will show a solid red light.

- When charging is complete, the LED indicator will turn off.

Low Battery

- A low battery alert will play once every 2 minutes.

- If the battery is not charged, the headset will turn off.

Battery Status Alert

- By pressing and holding the VOLUME DOWN button for 1 second, you can check

the battery status of the HBS-730. The audible battery status alert will inform you of
the battery level. There are 3 levels of battery power:

1. Battery High

2. Battery Medium

3. Battery Low

- The HBS-730 battery status indicator will appear on the iPhone screen.

Pairing

- Before using the headset for the rst time, you must pair it with a Bluetooth-enabled
device.

- There are 2 pairing mode methods with the HBS-730.

1) Easy Pairing

a) Slide the power switch to the ON position.

b) If it is your rst time pairing the device it will automatically enter pairing mode.

If it has been paired but no paired device is in range it will enter pairing mode
after 10 seconds.

ENG

5

How to Use

• The LED indicator will be solid blue.

c) On the device you wish to pair, nd the Bluetooth menu and search for or add

ENG

new devices.
d) Select LG HBS730 from the list of devices.
e) If asked for a Pass/Pin Code enter 0000 (4 Zeros).
f) Once the devices are paired, you will hear “Your headset paired.”.

• The HBS-730 will automatically turn off if not paired within 3 minutes.

2) Manual Pairing (pairing with another phone or re-pairing)

a) With the power off, press the CALL button and slide the power switch to the

‘ON’ position at the same time for 1 second.
b) When the headset enters Pairing Mode, the LED indicator will show a solid

blue light. After the procedure repeat Easy Pairing steps c though f.

Multi-connection

Advanced Multipoint

The HBS-730 is capable of having two devices connected to the headset at the
same time. This will give you the freedom of using call waiting between calls on
both of your connected phones.

Connection

- Pair the headset with one of your Bluetooth-enabled handsets. (per the pairing
instructions on page 6).

- Turn off the headset.

- With the power off, press the CALL button and slide the power switch to the ON
position at the same time for 2 seconds to enter Manual Pairing mode.

- Pair and connect the headset with your other Bluetooth-enabled handset. (this
will be your primary handset).

- Once this handset is paired and connected, go back and connect the originally
paired handset to the headset. This will now be your secondary handset.

* NOTE: When the HBS-730 is connected to two handsets at the same

time(Multipoint), the headset calling functions will work with the primary handset.

* NOTE: In case of failure to connect to the primary phone through Easy Pairing,

HBS-730 will enter pairing mode.

6

Calling Function

How to Use

- Voice Dialing and Last Number Redial features work with the primary handset (or

handset which made the last outgoing call).

Call Waiting

- While speaking on an active call, press the CALL button for 1 second to switch to
an incoming call.

- To switch between 2 active calls, press the CALL button for 1 second.

- To end both calls briey press the CALL button.

- If both handsets are receiving an incoming call, the headset will default to the
primary device.

Auto Reconnect

- If the HBS-730 is turned off (either accidentally or intentionally) while connected to
a handset, the headset and handset will disconnect. The headset and handset will
automatically reconnect when the HBS-730 is turned back on while in range.

- Secondary handset will need to be connected manually. Select LG HBS730 from
the list of devices in the Bluetooth menu and pair.

Out of Range

- If the paired devices are separated by a range of 33 feet (10 meters) or more, the
headset and handset will disconnect and HBS730 will vibrate to alert.

- If the headset and handset do not automatically reconnect when they are back within the

required range, briey press the CALL button on the HBS-730 to reconnect manually.

- While in multi-connection and streaming, the inactive paired device will be disconnected
when out of range. The HBS-730 will alert you once with no attempt to reconnect.

Calling

Answering a Call

- When there is an incoming call, the headset will ring and vibrate.

- Briey press the VOLUME DOWN button to stop vibration.

- Briey press the CALL button to answer the incoming call.

Transferring a Call

- If you make a call from the handset, the call will (depending on the phone settings)
automatically transfer to the headset. If the call is not automatically transferred, you can

manually transfer the call to or from the headset by pressing and holding the VOLUME

UP button for 3 seconds on the HBS-730 (handset and headset must be paired).

ENG

7

How to Use

Voice Dialing

- Briey press the CALL button to activate Voice Command. For best results, record

the voice dialing tag through your headset.

ENG

NOTE: If your handset does not support voice dialing, this action may activate

Last Number Redial.

Last Number Redial

- Press and hold the CALL button for 1 second to activate Last Number Redial.
The headset will beep and then call the last number dialed.

Ending a Call

- Briey press the CALL button.

Call Waiting

- Answer a second call without hanging up the rst call by pressing the CALL button

for 1 second. Press the CALL button for 1 second to return to the original call.

- Briey press the CALL button to terminate both calls at once.

Rejecting a Call

- Activate call reject by pressing the CALL button for 1 second when the handset
rings.

* These functions may only be used if your handset supports them. For further

information about using these features, please consult your handset’s user manual.

Mic Mute

- Press and hold the VOLUME UP and VOLUME DOWN buttons simultaneously for

1 second to mute/unmute the Mic during conversation.

Volume Control

- Press the VOLUME UP or VOLUME DOWN button to adjust the speaker volume.

- There are 8 levels of speaker volume in Hands-Free mode.

- There are 8 levels of speaker volume in Audio Streaming mode.

Audio Streaming

Play

- Briey press the PLAY/PAUSE/STOP button.

Pause

- While playing music, briey press the PLAY/PAUSE/STOP button.

Stop

- While playing music, press and hold the PLAY/PAUSE/STOP button for 1 second.

8

How to Use

Next song

- Briey press the FF button.

Previous song

- Briey press the REW button.

Fast Forward

- Press and hold the FF button.

Rewind

- Press and hold the REW button.

Equalizer

- While playing music, press and hold the VOLUME UP and VOLUME DOWN

buttons simultaneously for 1 second to switch between Bass Boost (default),
Normal, and Treble Boost.

- EQ is not changed if your handset supports aptX® codec and is enabled.

- The bass coming from the speakers can vary as a result of the size of the Earbud
that is being used.

®

aptX

- The HBS-730 features aptX® technology that ensures audio content transmitted
over Bluetooth is instant and crystal-clear.

- aptX® is automatically enabled as long as the source device supports it.

SMS Reader

The HBS-730 Bluetooth headset supports SMS
reading on Android TM based devices.
In Google Play™ search for the LG BT Reader
Plus application and install on your device to use
this function.
* The QR code shown here helps you download

the LG BT Reader Plus application from Google
Play. Google Play is a trademark of Google, Inc.

ENG

9

Summary of Button Functions

ENG

Function

Power on Power off Slide the power switch to the ON position.
Power off Power on Slide the power switch to the OFF position.

Volume up Talking Briey press the VOLUME UP button.
Volume down Talking Briey press the VOLUME DOWN button.

Transferring a call Talking

Answering a call Ringing Briey press the CALL button.
Stop incoming call

vibration alerting
Ending a call Talking Briey press the CALL button.
Call waiting Talking Press the CALL button for 1 second.
Last number redial Idle Press the CALL button for 1 second.
Voice dialing

(handset must
support)

Call reject Ringing Press the CALL button for 1 second.

Mic mute on/off Talking

Pairing mode
(Manual)

Battery status check
Play Power on Briey press the PLAY/PAUSE/STOP button.
Pause Music on Briey press the PLAY/PAUSE/STOP button.

Stop Music on

Next song Music on Briey press the FF button.
Previous song Music on Briey press the REW button.
Fast forward Music on Press and hold the FF button.
Rewind Music on Press and hold the REW button.

Equalizer settings Music on

10

HBS-730 Status

Press and hold the VOLUME UP button for 3

seconds.

Ringing Briey press the VOLUME DOWN button.

Idle Briey press the CALL button.

Press and hold the VOLUME UP and VOLUME

DOWN buttons simultaneously for 1 second.

Power off

Idle Press the VOLUME DOWN button for 1 second.

Press the CALL button and slide the power switch
to the ON position at the same time for 4 seconds.

Press and hold the PLAY/PAUSE/STOP button
for 1 second.

Press and hold VOLUME UP and VOLUME

DOWN buttons simultaneously for 1 second.

Action

LED Indication

Function HBS-730 Status Action

Power on The blue LED light ickers 4 times.

Power off

Pairing mode The blue LED light stays on.

Operating

Headset / hands-free

prole connected

Call connected

Charging The red LED light stays on.

Charging

Charging complete

The blue LED light ickers 4 times and then

turns off.

The blue LED light ickers 2 times every 5

seconds.

The blue LED light ickers 2 times every 5

seconds.

LED turns off.

Troubleshooting

Issue Possible problem Resolution

Does not turn on

Unable to
communicate with
the LG Bluetooth®
Headset HBS-730

Unable to pair the
HBS-730 with the

Bluetooth® device

Low sound (speaker) Check the speaker volume. lncrease the volume level.

Check whether the battery of
the HBS-730 is fully charged.

Check whether the handset
supports the headset or
hands-free Bluetooth proles.

Check whether the battery of
the HBS-730 is low.

Check and make sure the
headset is on.

Check and make sure the
headset is placed in pairing
mode.

Charge the battery.

Determine whether your handset
supports the headset or hands­free Bluetooth proles.

Charge the battery.

Slide the power switch to the ON
position to turn on the headset.

With the power off, press the
CALL button and slide the power
switch to the ON position at
the same time for 1 second to
manually place the headset in
pairing mode.

ENG

11