LG LGHA WNA1105 Users manual

LGE Internal Use Only

Smart Appliance Accessory manual

Thank You for purchasing this Smart Appliance Accessory!!!

This Accessory is used exclusively for LG Electronics Smart Appliances. This instruction manual will guide you through the setup of the communication modems. Please refer to the product owner’s manual for a description of each product functions.

Accessory Manual

LGE Internal Use Only

1. Contents	USB Memory stick
	• The memory stick is for updating the
	software when there is a Wireless Network
	failure. To download new software, access
	the LG Smart Appliance homepage
	(http://us.smartthinq.com), download
	necessary SW onto the USB, and update the
	software by plugging it into the wireless
	modem port.
	Wireless Modem
	• The wireless modem enables Wireless
	Network connection and Remote control,
	monitoring and SW download possible. It
	only works if there is wireless AP(Access
	Point) nearby and allows remote
	control/monitoring and SW Update.
	Zigbee Modem
	• The Zigbee modem enables the product to
	receive information from utility company or hub
	and enables the product to operate under delay
	mode or energy saving mode. It is designed to
	operate according to SEP 1.0 standards (’11
	standard).

Manual that includes all three features listed above

Smart Appliance Accessory manual

Accessory Manual

LGE Internal Use Only

2.Installation (Washer)

1)Check the “Smart Connect” cover.

2) Open “Smart Connect” cover to determine the location of the modem. If you’re in front of the panel, plug the Zigbee modem in the left side and plug the Wi-Fi modem in the right side. The Zigbee modem and Wireless modem back be used separately.

	Zigbee Modem	Wi-Fi Modem
		or USB Memory stick

Accessory Manual

LGE Internal Use Only

2.Installation (Washer)

3)The picture below shows both modems plugged in.

Zigbee Modem

Wi-Fi Modem

(or USB Memory stick)

4) After plugging in the modem, close the cover.