LG LFXS24663S/01 Owner’s Manual

ENGLISH

ESPAÑOL

OWNER’S MANUAL

BOTTOM FREEZER REFRIGERATOR

Please read this manual carefully before operating your set and retain it for future reference.

MANUAL DE USUARIO

REFRIGERADOR CON CONGELADOR INFERIOR

Lea detenidamente este manual antes de empezar a utilizar el refrigerador y guárdelo como referencia para el futuro.

Model Name/Nombre de Modelo **=color number/número de color

LFXS24663* GM63SDS LM63SDS

P/No. MFL67227306-7

ww w.lg.com

TABLE OF CONTENTS

English Version Spanish Version

Important Safety Instructions 3-4

Requirements for Ground Connection

Parts and Features 5-6

Refrigerator Installation 7-14-

Unpacking 7 Installation 7

How to remove and install Handle 8 How to remove and Install the R

efrigerator Doors 9 How to remove and Install Pull-Out Drawer 12-13 Closing and Aligning the doors 14

Using your Refrigerator

Control Panel Features 15 The LED Display 16 Adjusting the temperatures and display Operating the dispenser 18 Setting the functions 19 Spaceplus Ice System 20

Automatic Icemaker 21 Adjusting Control Settings 22 Food Storage Guide 22 Storing Frozen Food 22 Refrigerator Section 23-25 Refrigerator Shelves

Crisper Humidity Control 24 Door Racks 25

Dairy Compartment 25

Dispenser Drip Tray 25

Freezer Section Ice Bin 26 DuraBase 26 Durabase Divider 26 Pull Out Drawer 26

Door In Door

Door In Door Compartment

Door In Door case

Door In Door bins

Door In Door lower bins

15-27

27 27 27 27 27

Refrigerator Care an

Refrigerator Cleaning Outside 28 Inside Walls 28 Door Lining & Gasket 28

Plastic Parts (Covers and Panel) 28

Back Cover 28

Replacing refrigerator lights

Replacing the fresh Air Filter Power Interrup When Going on Vacation 29 When Moving Water Filter (Type 1) 30

Performance Data Sheet (Type 1) Certiﬁc

Connecting the Water Line 35-37 Troubleshooting Guide 38-40

Smart Diagnosis 41

Warranty 42-46

ate for California

d Cleaning 28

tions 29

THANK YOU!

Congratulations on your purchase and welcome to the LG family. Your new LG French Door Refrigerator combines advanced cooling technology with simple operation and high efﬁciency. Follow the operating and care instructions in this manual and your refrigerator will provide you with many years of reliable service.

28 28

32 34

IMPORTANT SAFETY INSTRUCTIONS

SAFETY MESSAGES

This manual contains several important safety notices. Always read and obey all of the following safety messages.

This is the safety alert symbol. This symbol is a warning to potential dangers that could cause death, injury or damage to you, others or the product. All safety messages will follow after this warning symbol and the word “DANGER”, “CAUTION” or “WARNING”. These words mean:

DANGER

WARNING

CAUTION

All safety messages inform you of potential danger, advise you on how to reduce the risk of injury and tell you what can occur if the instructions are not followed.

To reduce the risk of ﬁre, electrical shock or personal injury, the following precaution measures should be followed:

NEVER disconnect the refrigerator by pulling the power cord, always grip the plug ﬁrmly and disconnect it directly from the outlet.

Repair or replace immediately all faulty or damaged service cables. Do not use cords that have cracks or abrasion damage on the length of the cord or on the plug.

When moving your refrigerator, take care not to roll over the electrical cord.

DO NOT store or use gasoline or other combustible liquids or vapors in proximity with this or any other electrical appliance.

DO NOT permit children to climb, stand or swing from the doors or shelves of the refrigerator. This can cause serious injury to them and damage to the product.

Keep your ﬁngers away from areas in which they can become caught, such as the doors, hinges and cabinets. Be careful closing the doors when children are near.

Unplug the refrigerator before cleaning or repairing. NOTE: We strongly recommend that any repair services be performed by a qualiﬁed professional.

DO NOT store explosive substances such as aerosol cans with a ﬂammable propellant in this appliance.

If the use of this unit is no longer needed, please contact local authorities to dispose of this product in a safe way due contains Pentane-cycle or pentane like gas for insulation. Insulation gases require a special elimination process. This product contains ﬂammable insulation.

NOT lengthen or modify the power cord. DO NOT use extension cords or adapters ungrounded.

The insulation in this unit contains cyclopentane or a pentane-like gas which is ﬂ ammable and requires a special elimination process. Before discontinuing use of this refrigerator, contact local authorities to arrange for safe disposal of the unit.

You may be killed or suffer fatal damage if you do not follow instructions.

You may be killed or seriously injured if you do not follow instructions.

Indicates a potentially hazardous situation which, if not avoided, may result in minor injury or damage to the product.

WARNING

Do not keep bottles in the freezer compartment, they

could explode after freezing and cause damage.

For your safety, this product should be properly grounded. Have a qualiﬁed professional check the electrical circuit and outlet to ensure a proper ground connection.

Read all instructions before utilizing the product. Utilize this product only as explicitly expressed in this guide.

Once the refrigerator is operating, avoid touching cold surfaces of the freezer with damp or wet hands; the skin could become adhered to these surfaces.

In refrigerators with an contact with moving parts of the ejector mechanism or with the heating mechanism that discharges the cubes. DO NOT place your ﬁngers or hands in the ice dispenser mechanism while the refrigerator is connected.

DO NOT refreeze foods which have already thawed.

The United States Department of Agriculture in Home and Garden Bulletin No. 69 says:

“...You may refreeze food that has thawed if they contain ice crystals or are cold and below 40 °F (4 °C)”.

“...Ground beef, discolored or has an unpleasant odor should not be frozen or consumed. Consumption of melted ice cream should also be avoided. If the odor or color of food is questionable, discard it. The food may be dangerous to consume”.

“Partial thawing or refreezing reduces the quality of the food, especially fruit, vegetables and prepared meals. The quality of red meat is less affected than other foods. Use refrozen products as soon as possible in order to maintain their quality”.

This product contains chemicals known to the State of California to cause cancer. Wash hands after handling.

perishable

KEEP THESE INSTRUCTIONS

automatic ice dispenser, avoid

food or seafood that is

CAUTION

This appliance is not intended for use by children, persons with physical or mental disabilities, persons with reduced sensory or mental capacity, or persons with lack of experience or know-how, unless they have supervision or instruction in relation to the use of the appliance by the person responsible for their safety. Children should be supervised to assure that they do not play with the appliance.

DANGER: CHILDREN MAY BECOME TRAPPED

Children becoming trapped or suffocated is not a problem of the past. Discarded and abandoned refrigerators are a hazard, even if they remain there “for just a few days”. If you would like to dispose of your old refrigerator, please follow the instructions below to prevent any accidents.

BEFORE DISPOSING YOUR REFRIGERATOR OR FREEZER WHEN NO LONGER IN USE:

Remove the doors. Leave the shelves in place so that children

cannot easily become stuck in them.

WARNING

Keep away from moving drawers.

be knocked down.

can be injured.

Do not sit or climb on drawers.

CFC DISPOSAL

Your old refrigerator may have a cooling system that uses CFC’s (chloroﬂuorocarbons). CFC affects the stratospheric layer of the ozone.

If you decide to throw out your old refrigerator, ensure that CFC contaminants are properly disposed of by a qualiﬁed professional. If you intentionally remove the CFC refrigerant, you could be subject to ﬁnes or prison in accordance with environmental legislation in effect.

REQUIREMENTS FOR GROUND CONNECTION

IMPORTANT: Attentively read the following.

TO CONNECT ELECTRICITY

WARNING

ELECTRICAL SHOCK HAZARD

FOR YOUR PERSONAL SAFETY, this appliance must

be properly grounded. Have a qualiﬁed electrician check your wall outlet to ensure that the plug is grounded properly.

3 prong grounding type wall receptacle

3 prong grounding Ensure proper plug ground exists before use

RECOMMENDED GROUNDING METHOD

Your refrigerator must always be plugged to its own outlet which is adequately grounded. The energy current should only be 115 V ~ 60 Hz, AC or 127 V ~ 60 Hz, AC (according to the National rating). This provides the best performance and prevents an overload which could cause a ﬁre from the overheating of the cables.

It is recommended that a separate circuit be used for this appliance, as well as a receptacle that cannot be disconnected with a switch.

Do not use an extension cable. It is your responsibility and obligation to replace two-prong outlets with that of an adequately grounded three-prong outlet.

Do not, under any circumstance, cut or extract the third p

rong from the plug.

NOTE: Before installation, cleaning or replacing light

bulbs, you must disconnect the appliance from the power source. When ﬁnished, plug the appliance back in and adjust the thermostat to the desired position.

USE OF EXTENSION CABLES

We do not recommend the use of extension cables.

However, if you still choose to utilize an extension cable, it is absolutely necessary that it is listed in the UL (in the United States) or CSA (in Canada), that it supports three-pronged plugs and that the electrical current support a minimum of 15 A and 120 V.

The use of an extension cable will increase the amount of space needed behind the refrigerator.

WARNING

REPLACING ELECTRICAL CABLE

If the power cord is damaged, it must be replaced by our service center or qualiﬁed LG technician to avoid any risk.

PARTS AND FEATURES

HUMID

SPECIAL FEATURES

CONTROL PANEL LED DISPLAY SCREEN

Simple electronic controls are user-friendly. The LED screen shows refrigerator and freezer temperatures, displays water ﬁlter status, dispenser information, and more.

ICE PLUS

When this feature is activated, the freezer section will run at the coldest temperature for a 24- hour period to increase ice production.

FILTERED WATER AND ICE DISPENSER

The water dispenser offers fresh, chilled, ﬁltered water through the door. The ice dispenser offers cubed or crushed ice.

DOOR ALARM

A warning alarm sounds at 30-second intervals when the refrigerator or freezer door is left open for more than 60 seconds.

DOOR-IN-DOOR BUTTON

To access the Door-in-Door compartment, lightly press button on the right refrigerator door handle to open the door.

DOOR-IN-DOOR BIN

It makes spreading butter and slicing cheese easier.

SPACEPLUS ICE SYSTEM

The icemaker automatically produces 80–130 ice cubes in a 24-hour period to keep the ice dispenser fully supplied. The in-door design creates more shelf space.

CRISPERS

LG’s crispers preserve humidity and help vegetables stay crisp.

GLIDE‘N’SERVE (In some models).

Provides storage space with a variable temperature control that keeps the compartment colder than refrigerator.

MULLION

The door mullion folds in when the left door is opened.

AUTO CLOSING HINGE

When you slightly push the door of the refrigerator, it is automatically closed. (The door is automatically closed within 30° of the opening angle.)

AIR FILTER

The Air Filter helps remove odors from the refrigerator.

* Note: Reference image only

PRODUCE

DELI

MEAT

HIGH

TEMP. SELECTOR

LOW

* Note: Reference image only

NOTE: This guide covers several different models.

The refrigerator you have purchased may have some or all of the items listed below. The locations of the features shown below may not match your model.

PARTS AND FEATURES

KEY PARTS AND COMPONENTS

In addition to the special features and components outlined in the Special Features section , there are several other important components that are referenced in this manual.

ADJUSTABLE REFRIGERATOR SHELVING

The refrigerator compartment shelves are adjustable to allow ﬂexibility for storage needs.

DOOR-IN-DOOR CASE

REMOVABLE ICE STORAGE BIN

The ice storage bin can be removed to ﬁll ice buckets, coolers, or pitchers.

LED INTERIOR LAMPS

Refrigerator interior is lit by the LED array.

CAN STORAGE BIN

FIXED DOOR BINS

AIR FILTER

The Air Filter helps remove odors from the refrigerator.

CHEESE & BUTTER BIN

CONDIMENT BIN

REFRIGERATOR INSTALLATION

WARNING

EXCESSIVE WEIGHT HAZARD

Use the assistance of two or more persons to move or install the refrigerator. Not following these instructions may cause injury to the back and other parts of the body.

UNPACKING

Before installing your refrigerator, remove any tape or temporary stickers. Please remove vinyl from doors before connecting unit to the electrical supply (on some models). Do not remove any stickers that feature warnings, the model serial number or the technical label of the product located on the back of the refrigerator.

To remove adhesive tape residue, rub it well with your ﬁngers and a little liquid detergent. Clean with warm water and let dry.

Do not use sharp instruments, rubbing alcohol, ﬂammable liquids or abrasive cleaning products to remove the adhesive tape or glue. These products can damage the surface of your refrigerator. For more information, see the section on “Important Safety Instructions”.

The shelves come already installed in their factory position. Remove the shelves and replace them according to your spacing needs.

Moving Your Refrigerator:

Your refrigerator is extremely heavy. Make sure you protect the ﬂoor when moving your refrigerator for cleaning or servicing. Always pull your refrigerator straight out when moving it. Do not shift from side to side or “walk” the refrigerator when attempting to move it as this can cause damage to the ﬂoor.

3. Install the refrigerator in an area between 55 °F (13 °C) and 110 °F (43 °C). If the surrounding temperature

is lower or higher than previously mentioned, it can adversely affect the unit.

CAUTION: taeh raen tinu eht gnicalp diovA

sources, direct sunlight or humidity.

ONCE INSTALLED

1. Carefully clean your refrigerator and remove and dust

accumulated during shipping.

2. Install accessories such as the ice bin, door racks,

shelves, etc., in their proper places. These are already packed to prevent any possible damage during shipping.

3. Leave your refrigerator on for 2 to 3 hours before

storing food inside. Verify that there is a ﬂow of cold air in the freezer compartment to ensure proper cooling. Your refrigerator is now re

WARNING:

Take care when working with the hinges, base cover and stops, etc. You may injure yourself. DO not place your hands or any tools in the air vents, the base cover or in the bottom of the refrigerator. This may cause injury or electrical shock.

Keep a Proper Distance from Adjacent Objects

Please keep the refrigerator at an adequate distance from other objects. Insufﬁcient spacing can reduce the refrigerator’s freezing efﬁciency and increase electricity consumption.

Note:

This appliance is intended to be used in household and similar applications such as

working environments;

ady for use.

WARNING

EXPLOSION HAZARD

Keep all ﬂammable materials and vapors (such as gasoline) away from the refrigerator. Not following these instructions may cause death, explosion or ﬁre

INSTALLATION

1. Avoid placing the unit near heat sources, direct

sunlight, or humidity.

2. To avoid vibration, the unit should be leveled. If needed,

adjust the leveling screws to compensate for an unleveled ﬂoor. The front should be slightly taller than the rear to ensure that the doors close properly. The leveling screws can easily be turned by slightly tilting the front of the refrigerator, turning the leveling screws clockwise (

(

) to lower it.

) to raise it and counter-clockwise

other residential type environments;

The refrigerator should be level and ﬁrm ground.

2" (5.08 cm)

REFRIGERATOR INSTALLATION

TOOLS YOU MAY NEED

in (6 mm)

in (10 mm)

Hex Socket Wrench Phillips Screwdriver Flat Head Screwdriver Allen Wrench

NOTE: It is always recommended that the doors be removed when it is necessary to move the refrigerator through a narrow opening. If it is necessary to remove the handles follow the directions below. NOTE: Handle appearance may vary from illustrations on this page.

in (6 mm)

in (2,5 mm)

DOOR HANDLE REMOVING

1. Removing Refrigerator Handle

Loosen the set screws with the 3/32in (2,5 mm)

Allen wrench and remove the handle.

NOTE: If the handle mounting fasteners need to be tightened or removed, use a 1/4 in (6,4 mm) Allen wrench.

Mounting

Fasteners

Set Screw

Allen Wrench

2. Removing Freezer Drawer Handle

Loosen the set screws located on the lower side of

the handle with the

in (2,5 mm) Allen wrench

and remove the handle. NOTE: If the handle mounting fasteners need to be tightened or removed, use a 1/4 in (6,4 mm)

Allen wrench.

DOOR HANDLE INSTALLATION

1. Reinstalling Refrigerator Handle

Place the handle on the door by aligning handle footprints to ﬁt mounting fasteners and tighten the set screws with a 3/32 in (2,5 mm)

Allen wrench.

NOTE: If the handle mounting fasteners need to be tightened or removed, use a 1/4 in (6,4 mm)

Allen wrench.

Mounting Fasteners

2. Reinstalling Freezer Drawer Handle

Place the handle on the door by aligning handle footprints to ﬁt mounting fasteners and tighten the set screws on the bottom of the handle with a 3/32 in (2,5 mm) Allen wrench. NOTE: If the handle mounting fasteners need to be tightened or removed, use a 1/4 in (6,4 mm)

Allen wrench.

REFRIGERATOR INSTALLATION

Collet

(1)

(2)

(3)

(5)

(4)

(7)

(8)

(9)

(6)

(10)

(11)

(12)

(13)

(14)

REFRIGERATOR INSTALLATION

HOW TO REMOVE AND INSTALL REFRIGERATOR DOOR

1. Removing Refrigerator Doors

Remove the left-side door ﬁrst.

NOTE: Handle, top hinge and hinge cover appearance may vary from illustrations on this page.

WARNING

Disconnect electrical supply to the refrigerator before installing. Failure to do so could result in death or serious injury. Do not put hands or feet or metal sticks into the air vents, base grille, or bottom of the refrigerator. You may be injured or receive an electrical shock. Be careful when you work with the hinge, base grille, and stopper. You may be injured.

Left Door

Pull the water tube out of the ﬁtting while pressing the release ring on the ﬁtting (1). NOTE: When you pull out the tube, ﬁrst you have to push the collet by opposite direction of arrow in the upper picture and pull the tube out by direction of arrow. Open the door. Remove the top hinge cover screw (2 ). Use a ﬂat blade screwdriver to lift the tabs on the front underside of the cover (3). Lift up the cover. Remove the cover. Pull out the tube (4). Disconnect all wire harness (5). Remove the grounding screw(6). Rotate hinge lever (7) counterclockwise. Lift the top hinge (8) free of the hinge lever latch (9). Place the door on a non-scratching surface with the inside up.

Right Door

Open the door. Remove the top hinge cover sc

rew (10). Use a ﬂat blade screwdriver to lift the tabs on the front underside of the cover (11). Lift up the cover. Rotate hinge lever (12) clockwise. Lift the top hinge (13) free of the hinge lever latch (14). Place the door on a non-scratching surface with the inside up.

CAUTION: When lifting the hinge free of the latch, be careful that the door does not fall forward.

Lift the door from the middle hinge pin and remove the door. Place the door, inside facing up, on a nonscratching surface.

(9)

(8)

(10)

(11)

(12)

(13)

REFRIGERATOR INSTALLATION

HOW TO REMOVE AND INSTALL REFRIGERATOR DOOR (CONT.)

2. Refrigerator Door Reinstallation

Install the right-side door ﬁrst.

Righ

t Door

Lower the door onto the middle hinge pin (1). Make sure the door is aligned with the cabinet. Fit the top hinge (2) over the hinge lever latch (3) and into place. Rotate the lever (4) counterclockwise to secure the hinge. Hook the tab on the door-switch side of the cover (5) under the edge of the wire opening in the cabinet top. Position the cover into place. Insert and tighten the cover screw (6).

Left Door

Lower the door onto the middle hinge pin (7). Make sure the door is aligned with the cabinet. Fit the top hinge (8) over the hinge lever latch (9)

and into place. Rotate the lever (10) clockwise to secure the hinge. Install the grounding screw (11) and connect all the wire harnesses (12). Push the water supply tube (13) into the hole on the top case and pull it through the backplate.

Image only for reference

(5)

(6)

(4)

(3)

(2)

Correct

Incorrect

Collet

Insert Line

Clip

Tube

REFRIGERATOR INSTALLATION

Insert the water supply tube into the connector. Insert the tube at least 5/8 in. (15 mm) into the connector.

Hook the tab on the door-switch side of the cover

under the edge of the wire opening in the cabinet top. Position the cover into place. Insert and tighten the cover screw.

CAUTION

1. Insert the tube until you can see only one of the lines

printed on the tube.

2. After inserting, pull the tube to ascertain that it is

secure.

3. Assemble the clip.

REFRIGERATOR INSTALLATION

HOW TO REMOVE AND INSTALL THE PULL OUT DRAWER (3 DOORS MODELS).

1. Removing Pull out Drawer

IMPORTANT: To avoid possible injury, product or

property damage, you will need two persons to perform the following instructions.

To remove the drawer, push the tabs located on the front inside surface of each rail. Then gently lift the rear left and right sides of the drawer and pull it out (Fig. 1)

Fig. 1

To reinstall, pull out and fully extend both rails. Insert the end of rib in the bracket at left and right. Making sure that the guides at the front are lined up properly, gently push down on both sides (Fig. 2)

Remove the screws of the rail on both sides.

(Fig. 4)

Fig. 4

screw

CAUTION: When removing drawer door, do not

hold it by the handle. The door could fall down and you may be injured. Grasp the door with both hands as pictured below when removing.

CAUTION: When laying down the drawer, be

careful not to damage the ﬂoor or hurt your feet with the sharp edges on hinge side.

With both hands, hold both sides of the door (Fig. 5) and pull it up to separate it from the rails. (Fig. 6)

Fig. 5

Fig. 2

Pull the drawer open to full lower extension. Remove the durabase by lifting it from rail system. (Fig. 3)

Fig. 3

Durabase

Fig. 6

Door supports

Rail tabes

Fig. 9

Screws

Fig. 11

REFRIGERATOR INSTALLATION

Push the rails back into drawer cavity. With both hands, hold the center of the bar and push it in so that both rails go back simultaneously. (Fig.7) (Fig. 8)

Fig. 7

Fig. 8

Hook door supports into rail tabs. (Fig. 10)

Fig. 10

Lower door into ﬁnal position and tighten the screws. (Fig. 11)

Door Supports

Rail tabes

HOW TO REMOVE AND INSTALL THE PULL OUT DRAWER (CONT.)

2. Installing Pull out Drawer

IMPORTANT: To avoid possible injury, product or

property damage, you will need two people to perform the following instructions.

With both hands, hold the center of the bar and pull it out to let both rails out to full extension simultaneously. (Fig. 9)

With the rails pulled out to full extension, insert the durabase in the rail assembly. (Fig. 12)

Fig. 12

WARNING: To prevent accidental child and pet

entrapment or suffocation risk, DO NOT allow them to play inside of drawer.

WARNING: DO NOT step or sit down on Freezer

Drawer.

Durabase

REFRIGERATOR INSTALLATION

CLOSING AND ALIGNING THE DOORS

Closing the Doors

Your refrigerator has two front leveling screws, one on the right and one on the left. If your refrigerator seems unstable or if you would like the doors to close more easily, simply adjust the inclination of the refrigerator by following the instructions below:

1. Plug the refrigerator into a 3 prong grounded outlet.

Move the refrigerator into its ﬁnal position.

2. Remove the base grille (Refer to the section on “Installation of Base Grille”).

3. Use a ﬂat head screwdriver to adjust the leveling screws,

turning clockwise to raise the side of the refrigerator and counter-clockwise to lower it. It may take several turns to adjust it to the inclination you would like.

NOTE: Having someone push against the top of the refrigerator takes some weight off the leveling screws. This will make it easier to adjust the screws.

Door Alignment

The left refrigerator door has an adjustable nut, located on the bottom hinge, to raise and lower the door for proper alignment.

If the space between your doors is uneven, follow the instructions below to align the doors evenly:

Use the wrench (included with the Use & Care Guide) to turn the nut in the door hinge to adjust the height. To the right to raise or to the left to lower the height.

The right refrigerator door does not have an adjustable nut.

If the space between your doors is uneven, follow the instructions below to align the right door:

With one hand, lift up both the inner and

outer door sections of the right door to raise them at the middle hinge. (Opening the door may make lifting it easier)

With the other hand, use pliers to insert the

snap ring on the middle hinge of the inner door section as shown. Do not insert the ring on the hinge of the outer door section.

Insert additional snap rings until the right door

is aligned. (Two snap rings are provided with the unit.)

Image only for reference.

4. Open both doors again and check to make sure that

they close easily. If not, slightly tilt the refrigerator further back by turning b

oth leveling screws clockwise. It may take several more turns. Make sure that you turn both leveling screws the same amount.

5. Ensure that the refrigerator is even by using a level.

6. Replace the base grille.

NOTE: Your new refrigerator is uniquely designed with

two fresh food doors. Either door can be opened or closed independently of one another. You may have to exert slight pressure on doors to get them to close completely.

Outer

Door

Inner Door

USING YOUR REFRIGERATOR

CONTROL PANEL FEATURES

NOTE: The shape of the buttons may not match your model.

LED DISPLAY

ICE TYPE / ICE PLUS

REFRIGERATOR BUTTON

FREEZER BUTTON

The LED display shows the temperature settings, dispenser options, water ﬁlter, door alarm, and locking status messages.

The ICE TYPE button is used to select Cubed Ice or Crushed Ice. *OR, Press and hold this button for at least 3 seconds to activate or deactivate the Ice Plus mode.

Press the REFRIGERATOR button to adjust the temperature in the refrigerator compartment.

**NOTE: When pressed simultaneously with the FREEZER button for more than ﬁve seconds, the

temperature display will change from Fahrenheit to Celsius or vice versa.

Press the FREEZER button to adjust the temperature in the freezer compartment.

**NOTE: When pressed simultaneously with the REFRIGERATOR button for more than ﬁve

seconds, the temperature display will change from Fahrenheit to Celsius or viceversa.

AIR FILTER BUTTON

(in some models)

Press this button to control the Air Filter Function to remove odors from the refrigerator. Press and hold the Fresh Air Filter button for more than 3 seconds to reset the ﬁlter indicator

ter the air ﬁlter has been replaced.

LIGHT/WATER FILTER BUTTON

The LIGHT/FILTER button controls the lamp in the dispenser. Press and hold the LIGHT/FILTER button for more than 3 seconds to reset the ﬁlter indicator after the water ﬁlter has been replaced.

DOOR ALARM/LOCK BUTTON

Press this button to control the door-open alarm.

Press and hold this button at least 3 seconds to lock or unlock all the other function buttons on the control panel, including operation of the dispenser.

USING YOUR REFRIGERATOR

THE LED DISPLAY

The LED display shows the temperature settings, dispenser options, water ﬁlter, door alarm, and locking status messages.

DISPENSER SELECTION INDICATOR

Shows Cubed ice or Crushed Ice selection

that will be dispensed when the push switch is pressed.

** REFRIGERATOR TEMPERATURE

Indicates the set temperature of the refrigeratorcompartment in Celsius or Fahrenheit.

** FREEZER TEMPERATURE

Indicates the set temperature of the freezer compartment in Celsius or Fahrenheit.

ICE PLUS

When the ICE PLUS button is pressed, the display will indicate the selected function has been activated.

DISPENSER LIGHT INDICATOR

When the LIGHT button is pressed, the display will indicate the selected function:

The dispenser light is on, this indicator will appear on the display panel.

DOOR ALARM INDICATOR

AIR FILTER BUTTON (in some models)

This indicator shows the air ﬁlter is activated.

WATER FILTER STATUS

This indicator shows the current status for

This indicator shows that the door-open warning alarm is activated.

the water ﬁlter. See Resetting the Filter Indicator.

CAUTION

Display mode setting and its cancellation

REFRIGERATOR button and ICE PLUS button more than

5 seconds, then it goes to the display mode. (Display will show the word “OFF”).

REFRIGERATOR button and ICE PLUS button click 3 times, then it goes to the display mode. (Display will show the word “OFF”).

LOCK STATUS

This indicator shows the current status for

the control panel functions is set to LOCK.

USING YOUR REFRIGERATOR

ADJUSTING THE TEMPERATURES AND DISPLAY

Adjust Freezer Temperature

To adjust the temperature in the freezer compartment, press the FREEZER button to cycle through the the range of available settings.

Adjust Refrigerator Temperature

To adjust the temperature in the refrigerator compartment, press the REFRIGERATOR button to cycle through the range of available settings.

NOTE: The actual inner temperature varies depending on the food status, since the indicated temperature setting is the target temperature and not the actual temperature within the refrigerator. Initially set the REFRIGERATOR CONTROL at 37 °F (3°C) and the FREEZER CONTROL at 0°F (-18°C). Leave them at these setting for 24 hours (one day) to stabilize. Then adjust the compartment temperature as illustrated above.

POWER SAVING MODE (in some models)

The display will remain off until the next time the door is opened. The display will also turn on when any button is pressed, and it will remain on for 20 seconds after the last door opening or button selection. To deactivate the Power-Saving Mode, press the

FREEZER and ICE PLUS/ENERGY SAVING or ICE PLUS buttons simultaneously and hold them for 5

seconds until the tone sounds.

NOTE: Power Saving Mode function is set on the product. Power Saving Mode is allways active in Models without energy Saving Mode.

CAUTION WHEN CLOSING THE DOOR

**TEMPERATURE DISPLAY

To change the temperature display from Fahrenheit to Celsius:

Simultaneously press and hold the FREEZER and REFRIGERATOR buttons for more than 5 seconds. Do the same to convert back to Fahrenheit.

CAUTION

To reduce the risk of door scratches, please make sure that the refrigerator door mullion is always folded in. If dew gathers on the refrigerator door mullion at any point, deactivate the Energy Saving mode until the issue resolves itself.

OPERATING THE DISPENSER

USING YOUR REFRIGERATOR

DISPENSING CRUSHED ICE

Press the ICE TYPE button to illuminate the Crushed Ice icon. Press the push ice switch with a glass or other container and crushed ice will be dispensed.

DISPENSING CUBED ICE

Press the ICE TYPE button to illuminate the Cubed Ice icon. Press the push switch with a glass or other container and cubed ice will be dispensed.

NOTE: Hold the glass or other container in place for a couple of seconds after dispensing ice or water to catch the last few cubes or drops. The dispenser is designed to not operate while either refrigerator door is open.

DISPENSING WATER

Press the push water switch with a glass or other container and chilled water will be dispensed. When the water switch is pressed, the light will be illuminated.

CONTROLLING THE DISPENSER LIGHT

Press the LIGHT/FILTER button to turn the dispenser light on and off.

WATER SWITCH

ICE SWITCH

CAUTION

When container with a small opening, place the container as close as possible to the opening on the water

or ice dispenser.

Do not dispense ice into

Water

Ice

china or crystal glasses. China or crystal can break.

Incorrect

Correct

SETTING THE FUNCTIONS

USING YOUR REFRIGERATOR

SETTING THE DISPENSER LOCK

Press and hold the ALARM/LOCK button for three seconds to lock the dispenser and all of the other control panel functions. Press and hold again for 3 seconds to unlock.

NOTE: The function lock in models without Energy Saving do not lock water and Ice Switch.

SETTING THE DOOR ALARM

The ALARM/LOCK button also controls the door alarm that sounds three times in 30-second intervals when a compartment door is left open for more than 60 seconds. The alarm stops sounding when the door is closed.

Press the ALARM/LOCK button once to activate and deactivate the door alarm function.

NOTE: Contact your local service center if the alarm continues to sound after the doors are closed.

ACTIVATING ICE PLUS

NOTE: Press the button again to deactivate the ICE PLUS function.

*ACTIVATING AIR FILTER

Press the ICE PLUS/ ENERGY SAVING or ICE PLUS button once to

activate the ICE PLUS function. The ICE PLUS icon on the display panel will illuminate when activated.

The ICE PLUS function runs the freezer compartment at the coldest setting for a 24hour period to increase icemaking by up to about 20%, and then turns off automatically.

The Air Filter has two settings, Auto a Auto mode, the Air Filter will

increments of ten minutes

d MAX. In

If set to the MAX mode, the Air Filter will stay on continu-

RESETTING THE FILTER INDICATOR

Press and hold the LIGHT/ FILTER button for more

than 3 seconds to reset the ﬁlter indicator after the water ﬁlter has been replaced.

NOTE: It is recommended that the ﬁlter be replaced when the indicator light on the front dispenser reaches

0. If the water or ice cube taste starts to deteriorates.

DIAGNOSTIC FAILURE DETECTION

The diagnostic function automatically detects pr

the display. NOTE: If a diagnostic code appears in the display during use, note the code and call your Service Center. Refer to the Warranty Card to obtain the telephone number of the Service Center near you.

oblems with your refrigerator, and a diagnostic code will appear in

After four hours, the Air Filter will switch to Auto mode.

six months.

USING YOUR REFRIGERATOR

Ice-detecting Sensor

SPACEPLUS ICE SYSTEM

CAUTION

Keep hands and tools out of the ice compartment door and dispenser chute. You could break something or injure yourself.

The icemaker will stop producing ice when the ice bin is full. If you need more ice, empty the ice bin into the extra ice bin in the freezer compartment so the icemaker can keep producing ice.

Shake the ice bin occasionally to level the ice in it. Sometimes the ice piles up near the icemaker, causing the icemaker to misread the amount of ice cubes and stop producing ice.

NOTE: Storing cans or other items in the ice bin may damage the icemaker.

Keep the ice compartment door closed tightly. If the ice compartment door is not closed tightly, the cold air in the ice bin will freeze food in the refrigerator compartment. This could also cause the icemaker to not produce ice.

NOTE: If the On/Off switch on the icemaker is set to Off for an extended time, the ice compartment will gradually warm up to the temperature of the refrigerator compartment. To prevent ice cubes from melting and leaking from the dispenser, ALWAYS empty the ice bin when the icemaker is set to Off for more than a few hours.

CAUTION

While you handle the ice bin, keep your hands out of blade. The blade has sharp edges could cause injury.

NOTE: To open or close the ice room compartment, push or pull on the handle.

Ice maker

operation video

To remove the in-door ice bin, grip the front handle, slightly lift the lower part, and slowly pull out the bin as shown.

To reinstall the in-door ice bin, slightly slant the bin during replacement to avoid contact with the icemaker.

NOTE: Avoid touching the Ice-detecting sensor when replacing the ice bin. See the label on the ice compartment door for details.

5 cells icemaker

6 cells icemaker

USING YOUR REFRIGERATOR

AUTOMATIC ICEMAKER

Ice is made in the automatic icemaker and sent to the dispenser. The automatic icemaker can make 10 or 12 ice cubes (depending on your device) at a time, above 100 cubes per 24-hour period. This quantity may vary by circumstance, including freezer compartment temperature, room temperature, number of door openings, freezer load, and other operating conditions.

It takes about 12 to 24 hours for a newly installed refrigerator to make ice. Icemaking stops when the ice storage bin is full. To turn off the automatic icemaker, set the icemaker switch to OFF (O). To turn on the automatic icemaker, set the switch to ON (I). The water pressure must be 20 and 120 psi on models without a water ﬁlter and between 40 and 120 psi on models with a water ﬁlter to make normal amount and size of ices.

NOTE: It is normal that a noise is produced when ice drops into the ice storage bin.

WARNING

Personal Injury Hazard

DO NOT place ﬁngers or hands on the automatic icemaking mechanism while the refrigerator is plugged in.

Icemaker

Power Switch

Ice-detecting Sensor

Icemaker

Even when the water pipe is not connected and the Ice Maker is turned on, the water valve operates. The noise is generated because the water pipe is not connected, which does not mean the icemaker is defective.

CAUTION

The ﬁrst ice and water may include particles or odor from the water supply line or the water tank. Throw away the ﬁrst few batches of ice (about 20 pieces) and purge the water line for 2 minutes after installation to eliminate air and odd tastes. This is also necessary if the refrigerator has not been used for a long time. Never store beverage cans or other foods in the ice bin for the purpose of rapid cooling. Doing so may damage the icemaker or the containers may burst. If discolored ice is dispensed, check the water ﬁlter and water supply. If the problem continues, contact an Authorized Service Center. Do not use the ice or water until the problem is corrected.

eep children away from the dispenser. Do not

K allow children to play in or around dispenser. The ice passage may also become blocked with frost if only crushed ice is used. Remove the frost that accumulates. Never use thin crystal glass or crockery to collect ice. Such glasses or containers may break, and

Power Switch

Ice-detecting Sensor

glass fragments could be in the ice. Dispense ice into a glass before ﬁlling it with water or other beverages. Splashing may occur if ice is dispensed into a glass that already contains liquid. Never use a glass that is exceptionally narrow or deep. Ice may jam in the ice passage and refrigerator performance may be affected. Keep the glass at a proper distance from the ice outlet. A glass held too may prevent ice from dispensing. To avoid personal injury, keep hands out of the ice door and passage. Never remove the dispenser cover. If you ﬁnd ice or water dispensed unexpectedly, turn off the water supply and call your Service Center. Refer to the Warranty Card to obtain the telephone number of the Service Center near you (24 hours a day, 365 days a year).

NOTE: Do not dispense ice continuously for more than 30 sec. Depress and release the dispenser pad for cycles of 30 seconds ON and 80 seconds OFF.

close to the outlet

USING YOUR REFRIGERATOR

ADJUSTING CONTROL SETTINGS

Give the refrigerator time to cool down completely before adding food. It is best to wait 24 hours before

adding food to the refrigerator.

The mid-settings indicated in the previous section

should be correct for normal household refrigerator usage. The controls are set correctly when milk or juice

is cold to your liking and ice cream is ﬁrm. The refrigerator control functions as the thermostat for the entire appliance. The higher the number setting, the longer the compressor will run to keep the temperature colder. The freezer control adjusts the cold air ﬂow from the freezer to the refrigerator. Setting the freezer control to a lower temperature keeps more cold air in the freezer compartment to make it colder.

If you need to adjust the temperature in the refrigerator or freezer, begin by adjusting the refrigerator ﬁrst. Wait 24 hours after the refrigerator adjustment to check the freezer temperature. If it is too warm or too c adjust the freezer control as well. Use the settings listed in the table below as a guide.

CONDITION/REASON: RECOMMENDED

ADJUSTMENT:

REFRIGERATOR section is too warm

Opening the door often Adding a large amount of food Room temperature is very warm

FREEZER section is too warm/ ice is made too slowly

Opening the door often Adding a large amount of food Room temperature is very low (not cycling often enough) Using ice frequently Air vents blocked by objects

REFRIGERATOR section is too cold

Controls not set correctly for your conditions

FREEZER section is too cold

Controls not set correctly for your conditions

Adjust the REFRIGERATOR setting to the next highest number and wait 24 hours, then check.

Adjust the FREEZER setting to the next highest number and wait 24 hours, then check.

Remove any objects blocking air ﬂow.

Adjust the REFRIGERATOR setting to the next lowest number and wait 24 hours, then check.

Adjust the FREEZER setting to the next lowest number and wait 24 hours, then check.

old, then

FOOD STORAGE GUIDE

ITEMS HOW TO STORE Storing Fresh Food Wrap or store food in the

refrigerator in airtight and moisture-proof material unless otherwise noted. This prevents food odor and taste transfer throughout the refrigerator. For dated products, check date code to ensure freshness.

Butter or margarine

Cheese Store in original packaging until

Vegetables with skins (carrots, peppers)

Fruit Wash and let dry; store in plastic

Leafy Vegetables Remove original packaging and

Fish Consume ﬁsh or seafood the

Chef Fresh Store any meat in original airtight,

Leftovers Cover leftovers with plastic

Store opened butter in a covered dish or in a closed compartment. When storing a larger quantity, wrap in freezer packing and freeze.

you are ready to use it. Once opened, tightly rewrap with plastic wrap or aluminum foil.

Place in bags or plastic containers inside the crisper.

bags in the refrigerator. Do not wash or pit berries until you are ready to eat them. Berries should be selected and kept in their original packaging (if there is any)

or in a paper bag closed

halfway and set on a shelf.

trim any dirty or discolored parts. Wash in cold water and drain. Place in a plastic bag or plastic container and store in the crisper.

same day purchased.

moisture-proof packaging Rewrap if necessary.

wrap or aluminum foil. Plastic containers with airtight lids can also be used.

STORING FROZEN FOOD

NOTE: For more information on how to prepare food to

be frozen such in a way to see the period they can be stored consult a frozen food guide or cook book.

Packaging

A great freezing depends on how great you package the food. When you seal the package make sure you remove all excess air and do not allow humidity. A package that is incorrectly sealed will r odors, contaminants inside your refrigerator and will

esult in the transmission of bad

USING YOUR REFRIGERATOR

Packaging Recommendations:

Use sealed plastic containers. Use plastic containers with a smooth surface. Package with aluminum foil of high resistance. Wrap with paper layered with plastic. Use water proof plastic. Use recommended plastic bags to store frozen foods.

Follow these packaging or container instructions in order to reach the best freezing

Do not use:

Bread Wrapping. Plastic container not safe for storing. Containers without lids or seals. Waxed paper or waxed plastic. Thin wrapping paper or not water proof.

Freezing

IMPORTANT: Do not keep bottles in the freezer

compartment, they may explode after freezing and

cause damage.

For the maximum use of your freezer do not store excess food. Do not introduce a large amount of unfrozen foods that cannot be frozen within 24 hours (no more than 2 – 3 pounds or ,91 kg - 1,36 kg of food per square inch of space in the freezer). Sufﬁcient space must be left in order for the air to circulate properly around the packages. Leave enough space in order to close your refrigerator with out difﬁculty.

REFRIGERATOR SECTION

REFRIGERATOR SHELVES

The shelving of your refrigerator can be adjusted to comply with your storage necessities; Depending on the model you have in can include glass shelving or wired shelving. The storing of your foods together and adjusting the shelving to different heights will ease to help you locate what you need. This also helps your refrigerator to stay shut longer which will save you energy.

IMPORTANT: While your refrigerator glass shelving are cold do not clean with hot or warm water. The glass shelving may break if exposed to rapid temperature changes or shelving are made out of tempered glass so when at breaking they will fracture into tiny fragments.

NOTE: Be careful while moving or relocating the shelves they are heavy. If moving the shelves is required keep in mind to locate them in a safe environment to prevent them from breaking.

Adjusting Shelves

Remove the shelves and adjust them to your convenience.

Removing Shelves

Incline the front of the shelf in the direction indicated by ﬁgure 1 and lift in the direction indicated by ﬁgure 2. Pull the shelf towards you.

hard impacts. For your safety the glass

Storage times can vary depending on the type and quality of the food, the way its package, or packaging container used, (in comparison to air and humidity), and the temperature it being stored in. Ice crystals formed inside your package are normal it indicates the air and humidity inside

NOTE: Let warm foods cool off at room temperature for approximately 30 min, then wrap accordingly with the methods mention above and freeze. By letting your warm foods cool off before you introduce them to your freezer it will save you energy.

your package have condensed.

WARNING

SUFFOCATING DANGER

Adequate ventilation is required when using dry ice. Dry ice is Carbon Dioxide (CO produces oxygen, causing dizziness, slight headaches, unconsciousness or death. Do not inhale these vapors and properly ventilate the room while you use dry ice.

2). When it evaporates it

Replacing Shelves

Incline the frontal part of the shelf (1) and guide the shelf hooks towards the openings at the height desired. Then lower the front of the shelf (2) so the hooks can be inserted (3) in the shelf supports.

NOTE: Make sure that the shelf is installed in the horizontal manner. If not secured it can cause the shelves to fall, which will cause your stored food to spill.

USING YOUR REFRIGERATOR

MEAT

DELI

PRODUCE

TEMP. SELECTOR

LOW

HIGH

LOW

HIGH

MEAT

DELI

PRODUCE

TEMP. SELECTORTEMP. SELECTORTEMP. SELECTORTEMP. SELECTOR

LOW

WOL WO

HIGH

LOW

HIGH

LOW

HIGH

LOW

HIGHLOW

Sliding Shelves (in some models)

You can slide some of the shelves in your refrigerator towards inside or outside like explained below.

To slide the shelf towards the outside: Pull towards you, ﬁgure A. To slide the shelf towards the inside: Push until it stops, ﬁgure B.

In order to remove a shelf from a metal frame

Pull the shelf until it stops. Incline the front of the shelf towards the top and pull forward. Lift the shelf in the manner it moves across the support openings.

To put back into place just reverse these steps.

Functional Shelves (Folding Shelves, in some models) You can store tall articles like gallons or bottles just by

simply folding the shelf in half.

Figure A Figure B

L B A T

E G E V

T I U

R F

Fruits & Vegetables

U R F

B A T

E G E

Produce

Meat Deli

To remove or replace Glide‘N’Serve drawer

1. To remove, pull the drawer out to full extension.

2. Lift the front of the drawer up, then pull it straight out To install, slightly tilt up the front and insert the drawer into the frame and push it back into place.

NOTE: Removing the ﬁxed door bin is recommended to reduce the risk of door bin scratches.

CRISPER HUMIDITY CONTROL (in some models)

You can control the amount of humidity in the moisturesealed crispers. Adjust the control to any setting between HIGH and LOW.

“High”: keeps moist air in the crisper for best storage of vegetables. “Low”: lets moist air out of the crisper for best storage of fruits.

To remove or replace the crisper:

To remove, slide the crispers out to full extension. Lift the front of the crisper up, then pull it straight out. To install, slightly tilt up the front and insert thedrawer into the frame and push it back intoplace.

CAUTION:

cover because it could loose.

Be careful when you handle the glass

To remove the glass:

To remove or replace the crisper cover support:

Remove glass before removing the crisper cover

NOTE:

support.

While holding the crisper cover support with both hands (as shown in the image below). Pull forward and slightly lift the front part.

Remove the door in door case before removing the crispers.

USING YOUR REFRIGERATOR

Glide‘N’Serve (In some models).

E L B

A T E

G E V

T I

U R F

E L B

T E G E

Selection Button

Select

WARNING:

CAUTION w

NOTE

DISPENSER DRIP TRAY (in some models)

DOOR RACKS

USING YOUR REFRIGERATOR

FREEZER SECTION

ICE BIN (In some models) To remove Ice Bin:

Pull the drawer as much as possible (1). Raise the ice box and take it out carefully (2).

To reinstall Ice Bin:

Take the drawer off as much as possible and put the

ice bin in the right position.

Drawer

Ice Bin

DURABASE (in some models).

Fully extend the freezer drawer. Lifting

part and pull it up (1).

To put it back , insert the Durabase in the rail

assembly (2).

WARNING: In order to prevent accidents, such as

suffocation, DO NOT let children and pets play inside the durabase.

WARNING: There is enough space for the children

to play.

Pull-Out Drawer

To remove the drawer, push drawer to the back over the stoppers until it stops, gently lift the rear left and right sides of the drawer and pull it out.

DURABASE DIVIDER (in some models)

Allows organizing the Durabase area in 2 sections. For moving the divider, just move it in the direction that you want.

USING YOUR REFRIGERATOR

DOOR-IN-DOOR

The Door-in-Door cmpartment allows for easy access for commonly used food items.

The outer Door-in-Door includes two door bins, the Cheese&Butter and Condiments bins, that are specially designed for food, this makes spreading butter and slicing cheese easier.

NOTE

For best results, do not move the phone while the tones are being transmitted. If the call center agent is not able to get an accurate recording of the data, you may be

asked to try again.

1. To remove the Door-in-Door Case, lift up and pull out.

2. To replace the Door-in-Door Case, line the tabs on the Door-in-Door Case with the slots on the door and push down until it snaps into place.

Door-in-Door Compartment

To access to Door-in-Door compartment, lightly press the button on the right refrigerator door handle to open the door.

There is no need to grip the handle when opening the Door-in-Door door. If the handle is gripped when the button is pressed youmay hear a clicking noise. This is normal.

Door-in-Door Case

To open the Door-in-Door Case, slightly push the marked area to pop it open. The Door-in-Door Case is removable for easy cleaning and adjustment.

Door-In-Door door bins

The Door-in-Door inner and outer door bins are removable for easy cleaning.

1. To remove the door bins, lift up and pull out.

2. To replace the door bins, slide the door bin in above the desired support and push down until it snaps into place.

Door-In-Door lower bins

The Door-in-Door lower shelf is removible for easy cleaning.

1. After removing Door-in-Door Case

2. To remove the lower bin, lift up and pull out.

REFRIGERATOR CARE AND CLEANING

WARNING

EXPLOSION HAZARD

Do not use ﬂammable cleaners. Not following these instructions can cause death, explosion or ﬁre.

The refrigerator, as well as the freezer, do their own de-freezing. This process does not prevent the build up of contaminants, therefore it is suggested that you clean both parts once a month; clean spilled liquids immediately.

REFRIGERATOR CLEANING

Unplug your refrigerator. Pull out all of the removable parts (such as the vegetable and dairy doors). Use a clean sponge (or a soft rag) and use it with lukewarm water mixed with detergent. Do not use abrasive or concentrated cleaners. Hand wash it, and dry it thoroughly. Plug the refrigerator back in.

BACK COVER

WARNING

ELECTRICAL SHOCK HAZARD

Before you begin, either unplug the refrigerator or turn off power at the circuit breaker or fuse box.

NOTE: Back Cover should only be removed by a qualiﬁed technician.

In order to get an efﬁcient performance of your refrigerator, clean the back cover of it at least twice a year.

REPLACING REFRIGERATOR LIGHTS

NOTE: The interior lighting for refrigerator uses LED

lighting. DO NOT try to change any LED module. LED lighting should only be replaced by qualiﬁed technician.

REPLACING THE FRESH AIR FILTER

BACK

COVER

OUTSIDE

Wax the outside in order to create better protection. Make sure you use a product speciﬁcally design to be used for electro-domestic products (car wax is acceptable). Use a clean, soft rag, and perform this task twice a year. For metal-made refrigerators, do not wax, simply clean it with water and detergent. Do not use concentrated or abrasive products.

NOTE: Avoid the usage of chemical products that contain phosphates or bleach.

INSIDE (Allow freezer to slightly warm up a small degree to prevent cloth from sticking)

In order to eliminate bad odors, clean the inside of the refrigerator with a mixture of baking powder and lukewarm water (one teaspoon of baking powder per cup of water). Ensure that the powder dissolves thoroughly, in order to prevent any sort of damage.

DOOR LINING AND GASKETS

Use only a mild detergent (such as dish soap).

PLASTIC PARTS (Covers and Panels)

Do not use abrasive, paper or rough products. These could damage the product.

+ 64 hidden pages