LG LCV5300R-BP Owner’s Manual

OWNER'S MANUAL

IR Dome Camera

Please read this manual carefully before operating your set and retain it for future reference.

MODEL

LCV5300R-BN

LCV5300R-BP

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

REGULATORY INFORMATION: FCC Part 15

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

•A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of this product in the end user.

2

•Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

•Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces or shall be provided with brushings.

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Warning: Do not install this equipment in a confined space such as a bookcase or similar unit.

Warning: Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA 70.

Warning: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

Warning: To reduce a risk of fire or electric shock, do not expose this product to rain or moisture.

Caution: This installation should be made by a qualified service person and should conform to all local codes.

Caution: To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

Caution: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus.

Note:

Please make sure the product is installed appropriate places where secured from flood, such as under the eaves, to operate properly. This product is certified as IP66

standard. However, if there is any flood concerns, it is highly recommended to use an outdoor Housing When you install the camera inside an outdoor Housing, please use one of the following methods:

1.Remove the front glass of Housing before installing the camera.

2.To keep the front glass of Housing, remove the front cover, and then put the camera close to the front glass.

3

Disposal of your old appliance				LG Electronics hereby declares
				that this/these product(s) is/are
1. All electrical and electronic products				in compliance with the essential
	should be disposed of separately from the			requirements and other relevant
	municipal waste stream via designated			provisions of Directive 2004/108/EC
	collection facilities appointed by the			and 2011/65/EU.
	government or the local authorities.			European Standards Centre:
2.	The correct disposal of your old			Krijgsman 1, 1186 DM Amstelveen The
				Netherlands
	appliance will help prevent potential
			•	Please note that this is NOT a Customer Service
	negative consequences for the
	environment and human health.			contact point. For Customer Service Information, see
3.	For more detailed information about			Warranty Card or contact the dealer that you pur-
				chased this product.
	disposal of your old appliance,
	please contact your city office, waste
	disposal service or the shop where you
	purchased the product.
4.	EEE Compliance with Directive.
	(for Turkey only)

4

Important Safety Instructions

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

5

Cautions for Safe Operation

Power Supply

This camera must always be operated DC 12 V or AC 24 V.Certified/Listed Adaptor which comply with LPS.

Handling of the unit

Be careful not to spill water or other liquids on the unit. Be cautions not to get combustible or metallic material inside the body. If used with foreign matter inside, the camera is liable to fail or to get cause of fire or electric shock.

t Remove dust or dirt on the surface of the lens with a blower.

t Use a dry soft cloth to clean the body. If it is very dirty, use a cloth dampened with a small quantity of neutral detergent then wipe dry.

t Avoid the use of volatile solvents such as thinners, alcohol, benzene and insecticides. They may damage the surface finish and/or impair the operation of the camera.

Operating and storage location

Avoid viewing a very bright object (such as light fittings) during an extended period. Avoid operating or storing the unit in the following locations.

t Extremely hot or cold places (operating temperature -10 °C to 50 °C, however, we recommend that the unit be used within a temperature range of 0 °C to 45 °C)

t Damp or dust place

t Places exposed to rain

t Places subject to strong vibration

t Close to generators of powerful electromagnetic radiation such as radio or TV transmitters.

6

Contents

Features.............................................................................	8
Accessories..................................................................................	8
Part Names and Functions ....................................................	9
Part Names and Functions ..................................................	10
Connections ....................................................................	11
Basic connection.....................................................................	11
Installation ......................................................................	12
Mounting the Camera...........................................................	12
Image Adjustment .................................................................	15
Menu Operation..............................................................	18
OSD Menu Overview.............................................................	19
General Operation..................................................................	21
Exposure Settings...................................................................	22
White Balance settings .........................................................	25
Day/Night Setting ..................................................................	26
SmartIR Setting .......................................................................	27
Motion Detection Setting....................................................	28
3D-DNR Setting.......................................................................	29

Privacy Mask Setting .............................................................	29
Special Menu Settings ..........................................................	31
SYSTEM Setting .......................................................................	35
Specification ...................................................................	36

7

Features

This IR Bullet Camera is designed for installation in a video surveillance system.

This manual contains instructions on how to install and manage the IR Bullet Camera in your video surveillance system.

Should you require any technical assistance, please contact authorized service center.

t High resolution and high sensitivity with a 6 mm (1/3 Type) CCD.

t Day & Night function.

t HSBLC/BLC covers various light conditions.

t Weather Proof: IP66

Accessories

n

FRONT

MEZ62687703

SELFTAPPING SCREW

4 Place

PRODUCT CENTER POSITION

Installation sticker

CABLE HOLE (LCV5300)

CABLE HOLE (LCD5300)

Wrench

M4 Fixing screws

8

Part Names and Functions

		a Dome Cover
		b IR LED
		c IR Sensor
	a	d Focus lock lever
		Fixes the focus position after adjusting.
	b
		e Zoom lock lever
	c
	d	Fixes the zoom position after adjusting.
	e	f Rotate adjuster
	f
		g Pan adjuster
	g

9

Part Names and Functions

	h Setup menu control buttons
	i Video Out connector
	Use this jack for checking the picture with portable
	monitor when install the camera.
	j Power input connector
h	Supplies AC 24 V or DC 12 V from an external power
	source.
i	k Video output connector (BNC type)
j
k

10

Connections

Basic connection

The peripheral devices (DVR, monitor, etc.), AC/DC adapter and cables are not supplied.

1.Make the video signal connection between the camera and the monitor or DVR.

2.Connect a external power source to the power input jack of the camera. (recommended power adapter is AC 24 V/0.5 A, DC 12 V/0.5 A or above)

11

Installation

Mounting the Camera

Note:

Refer the manual of Dome bracket adaptor when you mount the camera on the wall, pendant and parapet.

Surface mount

Follow the instructions below to surface mount the camera with supplied camera mounting bracket.

1.Use the installation guide template to check the mounting location. Face the front of the label toward the area of interest. Using the template as a guide, make a hole through the ceiling.

FRONT

FRONT

2.Pass the connection cable through the inner side of the ceiling.

3MEZ6268770

FRONT

12