LG LCV5300-BP Owner’s Manual
OWNER'S MANUAL
Color Video Camera
Please read this manual carefully before operating your set and retain it for future reference.
MODEL
LCV5300-BN
LCV5300-BP
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
REGULATORY INFORMATION: FCC Part 15
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
•A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of this product in the end user.
•Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent
2
type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
•Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces or shall be provided with brushings.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Warning: Do not install this equipment in a confined space such as a bookcase or similar unit.
Warning: Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA 70.
Warning: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
Warning: To reduce a risk of fire or electric shock, do not expose this product to rain or moisture.
Warning: The product has been dropped or the case is broken, turn off the power and unplug the power cord. (This may cause fire, electric shock, or injury.)
Warning: If the product has no video out or sound, please stop using. Unplug the power cable immediately and contact the service center. (This may cause fire or electric shock.)
Caution: This installation should be made by a qualified service person and should conform to all local codes.
Caution: To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
Caution: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus.
Caution: Prevent the power cable from being severely bent or having pressure exerted on it by a heavy object.
To disconnect power from mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.
3
Disposal of your old appliance
1.When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.
2.All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
3.The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
4.For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.
EEECompliance with Directive. (for Turkey only)
LG Electronics hereby declares that this/ these product(s) is/are in compliance with the essential requirements and other relevant provisions of Directive 2004/108/ EC and 2011/65/EU.
European Standards Centre:
Krijgsman 1, 1186 DM Amstelveen The Netherlands
4
Important Safety Instructions
1.Read these instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Do not use this apparatus near water.
6.Clean only with dry cloth.
7.Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13.Unplug this apparatus during lightning storms or when unused for long periods of time.
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
5
Cautions for Safe Operation
Power Supply
This camera must always be operated DC 12 V or AC 24 V. Certified/Listed Adaptor which comply with LPS.
Handling of the unit
Be careful not to spill water or other liquids on the unit. Be cautions not to get combustible or metallic material inside the body. If used with foreign matter inside, the camera is liable to fail or to get cause of fire or electric shock.
•Remove dust or dirt on the surface of the lens with a blower.
•Use a dry soft cloth to clean the body. If it is very dirty, use a cloth dampened with a small quantity of neutral detergent then wipe dry.
•Avoid the use of volatile solvents such as thinners, alcohol, benzene and insecticides. They may damage the surface finish and/or impair the operation of the camera.
Operating and storage location
Avoid viewing a very bright object (such as light fittings) during an extended period. Avoid operating or storing the unit in the following locations.
•Extremely hot or cold places (operating temperature -10 °C to 50 °C, however, we recommend that the unit be used within a temperature range of 0 °C to 45 °C)
•Damp or dust place
•Places exposed to rain
•Places subject to strong vibration
•Close to generators of powerful electromagnetic radiation such as radio or TV transmitters.
6
Contents
Features............................................................................. |
8 |
Specification.................................................................... |
35 |
Accessories.................................................................................. |
8 |
|
|
Part Names and Functions................................................ |
9 |
|
|
Connections..................................................................... |
10 |
|
|
Basic connection..................................................................... |
10 |
|
|
Installation....................................................................... |
11 |
|
|
Mounting the Camera........................................................... |
11 |
|
|
Image Adjustment.................................................................. |
14 |
|
|
Menu Operation.............................................................. |
17 |
|
|
General Operation.................................................................. |
20 |
|
|
Exposure Settings................................................................... |
21 |
|
|
White Balance settings.......................................................... |
25 |
|
|
Day/Night Setting................................................................... |
26 |
|
|
Motion Detection Setting.................................................... |
27 |
|
|
3D-DNR Setting........................................................................ |
28 |
|
|
Privacy Setting......................................................................... |
28 |
|
|
Special Menu Settings........................................................... |
30 |
|
|
SYSTEM Setting........................................................................ |
34 |
|
|
7
Features
This Color Video Camera is designed for installation in a video surveillance system.
This manual contains instructions on how to install and manage the Color Video Camera in your video surveillance system.
Should you require any technical assistance, please contact authorized service center.
•High resolution and high sensitivity with a 6 mm (1/3 Type) Exview HAD CCD II.
•Automatically switch between DC 12 V and AC 24 V.
•Smart motion detector.
Accessories
FRON
T
n 
MEZ62687703
SELFTAPPING SCREW
4 Place
PRODUCT CENTER POSITION
Installation sticker
CABLE HOLE (LCV5300)
CABLE HOLE (LCD5300)
Wrench
M4 Fixing screws
8
Part Names and Functions
A Dome Cover
B Lens Cover
C Focus lock lever
Fixes the focus position after adjusting.
A |
D Zoom lock lever |
|
Fixes the zoom position after adjusting.
E Rotate adjuster
B |
F Tilting lock screw |
|
Fixes the tilting position after adjusting.
C |
D |
E |
F |
G |
H |
I |
J |
K |
GPan adjuster
HSetup menu control buttons
IVideo Out connector
Use this jack for checking the picture with portable monitor when install the camera.
JPower input connector
Supplies AC 24 V or DC 12 V from an external power source.
KVideo output connector (BNC type)
9
Connections
Basic connection
The peripheral devices (DVR, monitor, etc.), AC/DC adapter and cables are not supplied.
1.Make the video signal connection between the camera and the monitor or DVR.
2.Connect a external power source to the power input jack of the camera. (recommended power adapter is AC 24 V/0.5 A, DC 12 V/0.5 A or above)
10
Installation
Mounting the Camera
Note:
Refer the manual of Dome bracket adaptor when you mount the camera on the wall, pendant and parapet.
Surface mount
Follow the instructions below to surface mount the camera with supplied camera mounting bracket.
1.Use the installation guide template to check the mounting location. Face the front of the label toward the area of interest. Using the template as a guide, make a hole through the ceiling.
FRONT |
FRONT |
2.Pass the connection cable through the inner side of the ceiling.
CABLE |
CABLE |
PRODUCT |
|
HOLE |
HOLE |
|
|
CENTER |
|
||
(LCD5300) |
(LCV5300) |
|
|
|
|
||
|
|
e |
SELFTAPPING |
|
|
4 |
|
|
|
Plac |
SCREW |
|
|
|
MEZ6268770 3
FRONT
11
Installation
3.Install the camera mounting bracket to the ceiling.
MEZ6268770 FRONT
3
4.Connect the cables to the cable jacks of the camera body.
12
Loading...