Please read this manual carefully before operating
your set and retain it for future reference.
LCS710BR / LCS710DAB /
LCF810BR / LCF810DAB
Getting Started2
Safety Information
1
Getting Started
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
con ned space such as a book case or similar unit.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This lightning ash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
su cient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
To reduce the risk of electric
shock, do not remove the cover
or back of this product. There are
no user-serviceable parts inside.
Refer servicing to quali ed service
personnel.
To reduce the risk of re or electric
shock, do not expose this product
to dripping or splashing water, rain,
or moisture.
The temperature of unit’s outside
can be extremely high, please use
the unit after proper installation in
your vehicle.
This unit cannot play 8 cm disc (use
12 cm disc only).
While driving, keep the sound
volume at a proper level.
Do not drop it and avoid heavy
impacts at anytime.
Always operate the vehicle in a safe
manner. Do not become distracted
by the vehicle while driving, and
always be fully aware of all driving
condition. Do not change settings,
or any functions. Pull over in a
safe and legal manner before
attempting such operations.
Do not use for many hours at
extremely low or high temperature.
(-10 °C to 60 °C)
This unit is for vehicles with a
12-volt battery and negative
grounding. Before installing it
in a recreational vehicle, lorry or
bus, check the battery voltage.
To avoid shorts in the electrical
system, be sure to disconnect the E
battery cable before beginning the
installation.
Getting Started3
The unit is compatible with the steering wheel
remote control. The function allows operation
by sending the steering wheel remote control
signal to the unit.
For details, consult with your dealer.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service centre.
Use of controls, adjustments or the performance of
procedures other than those speci ed herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure. Visible laser radiation when
open. DO NOT STARE INTO BEAM.
“This device is equipped with a portable battery or
accumulator.
Safe way to remove the battery or the battery
from the equipment:
Remove the old battery or battery pack, follow the
steps in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators."
The battery shall not be exposed to excessive heat
such as sunshine, re or the like.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live File System, you cannot
use it on LG players.
(Mastered/Live File System : Disc format system for
Windows Vista)
Caution
>
When being connected in a wrong way, the
unit displays as follows.
- Antenna / Remote port short : "EXTERNAL ON
PORT SHORT CIRCUIT CHECK"
After connecting it again, restart the unit.
Disposal of your old appliance
1. When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by the
European Directive 2002/96/EC.
2. All electrical and electronic products
shall be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or the
local authorities.
3. The correct disposal of your old
appliance will help prevent potential
negative consequences for the
environment and human health.
4. For more detailed information about
disposal of your old appliance, please
contact your city o ce, waste disposal
service or the shop where you
purchased the product.
LG Electronics hereby declares that this/
these product(s) is/are in compliance
with the essential requirements and
other relevant provisions of Directive
1999/5/EC, 2006/95/EC and ECE
Regulation 10.03 (3.2.9).
European representative :
LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere, The
Netherlands
(Tel : +31-(0)36-547-8888)
The unit is compatible with the steering wheel
remote control. The function allows operation
by sending the steering wheel remote control
signal to the unit.
For details, consult with your dealer.
1
Getting Started
Table of Contents4
Table of Contents
1
1 Getting Started
2 Safety Information
5 Front panel [LCS710BR / LCS710DAB]
6 Front panel [LCF810BR / LCF810DAB]
7 Remote control
2
7 – Battery Installation
2 Connecting
8 About detachable control panel
3
4
5
[LCS710BR / LCS710DAB]
8 – Attaching the control panel
8 – Detaching the control panel
9 About detachable control panel
[LCF810BR / LCF810DAB]
9 – Attaching the control panel
9 – Detaching the control panel
10 Installation
10 – Basic Installation
10 – Removing the existing receiver unit
10 – ISO-DIN Installation
11 Connection
11 – Connecting to a car
3 Operating
13 Operation
13 – Basic operations
13 – Turning off the sound temporarily
13 – Using EQ (Equalizer)
13 – Checking the clock
13 – Turning off the display light
13 – Resetting the unit
14 – Adjusting the general settings
15 Listening to a CD
15 – Pausing or restarting CD playback
15 – Searching for a section within a track /
fi le
16 – Skipping to another track/ fi le
16 – Checking information about your
music
16 – Playing back tracks / fi les in a way you
want
17 Listening to music from an external device
17 – Preventing radical changes in volume
as switching sources
18 Listening to the TUNER
18 – Storing desired frequencies manually
18 – Listening to a preset station
19 – Adjusting TUNER settings
20 Listening to the DAB (Only LCS710DAB /
LCF810DAB)
20 – Storing desired stations manually
20 – Listening to a preset station
20 – Adjusting DAB settings
21 Using an USB device / SD card
21 – Moving to another drive
22 – Quick Search of a desired fi le
22 – Deleting the desired fi le
22 – Playable USB device / SD card
Requirement
22 – Recording to USB device / SD card
23 Listening to music by connecting iPod /
iPhone
23 – Pausing or restarting playback
23 – Searching for a section within a track /
fi le
23 – Checking information about your
music
24 – Playing back tracks / fi les in a way you
want
24 – Playing back fi les by music menus
24 – 2WAY Control
24 – Compatible iPod/iPhone models
25 Connecting a Bluetooth wireless
technology
26 – Using the buttons for Bluetooth
wireless technology
26 – Using a Bluetooth wireless technology
27 – Adjusting the setting
28 – WICS (Wireless Controller &
Synchronization)
29 – Phone compatibility list
4 Troubleshooting
32 Troubleshooting
5 Appendix
33 Specifi cations
Front panel [LCS710BR / LCS710DAB]
bc d efghi
F
a
[Front unit detached panel]
Getting Started5
1
Getting Started
j
k
lm
n
o
a B
Ejects a disc.
SRC / • OFF
b
- When pressed, selects function sources.
- When pressed and held, powers unit on or o .
c N
Plays and pauses playback.
Temporarily stops the sound.
Volume knob
d
- Adjusts volume level.
- Con rms the settings.
- Checks tracks, les or preset stations.
e
In each mode, sets playback items.
`
Activates setting menu.
BAND
f
- Selects a band in Tuner mode.
- Moves to a next USB drive.
iPOD / • TA
- Searches stations that have TA / TP
information, when it is pressed and held.
- Activates 2WAY Control.
Remote Sensor
g
Display window
h
i 6
Opens the front panel.
R
j
Recording to USB / SD card.
r
q
p
k
- Activates BT function.
- Answers a call.
l
Returns to the previous step.
Ends a call.
m A / D
Skip / Search / Seek / Tune
EQ
n
Improves sound quality.
- When pressed, selects the EQ function.
DISP
o
- Press it, you can check the clock time.
- Press and hold it, you can turn on /o the
display window and the light of LED buttons.
INT
p
Intro scan.
RPT
q
Repeats playback.
SHF
r
Shu es playback.
Numeric buttons (1 to 6)
s
Selects a numbered preset station in TUNER.
AUX
t
If connected to other portable player, you can
enjoy music from it on the unit.
USB port
u
SD card slot
v
s
tu
v
Getting Started6
b
F
Front panel [LCF810BR / LCF810DAB]
a
c
d
e
fg
1
h
[Front unit detached panel]
Getting Started
j
i
SRC / • OFF
a
- When pressed, selects function sources.
- When pressed and held, powers unit on or o .
b N
Plays and pauses playback.
Temporarily stops the sound.
Volume knob
c
- Adjusts volume level.
- Con rms the settings.
- Checks tracks, les or preset stations.
d
In each mode, sets playback items.
`
Activates setting menu.
BAND
e
- Selects a band in Tuner mode.
- Moves to a next USB drive.
iPOD / • TA
- Searches stations that have TA / TP
information, when it is pressed and held.
- Activates 2WAY Control.
Display window
f
Remote Sensor
g
OPEN
h
l
k
j
p
o
q
- Activates BT function.
- Answers a call.
k
Returns to the previous step.
Ends a call.
l A / D
Skip / Search / Seek / Tune
EQ
m
Improves sound quality.
- When pressed, selects the EQ function.
DISP
n
- Press it, you can check the clock time.
- Press and hold it, you can turn on /o the
display window and the light of LED buttons.
AUX
o
If connected to other portable player, you can
enjoy music from it on the unit.
USB port
p
SD card slot
q
n
m
Opens the front panel.
R
i
Recording to USB / SD card.
Remote control
SRC / • OFF
a
• When pressed, selects function sources.
• When pressed and held, powers unit o .
FUNC
b
When pressed, sets playback items in each
mode.
• MENU
When pressed and held, activates setting
menu.
BAND
c
Selects a band in Tuner mode.
DRV
Moves to a next USB drive.
d d/M
e
f
g
h c
Plays or pauses playback.
SHF Shu es playback.
MUTE Temporarily stops the sound.
VOLUME W /
Adjusts volume level.
/
Skip / Search / Seek / Tune
Returns to the previous step.
/
w
s
• List up / down
• Adjusts settings.
• Moves 10 MP3 / WMA tracks backward or
forward if there is no folder or one folder on a
CD.
• Moves to the previous or next folder if there
are more than 2 folders on a CD.
ENTER / LIST
• Con rms the settings.
• Checks tracks, les or preset stations.
S
v
Getting Started7
DISP
i
• Press it, you can check the clock time.
• Press and hold it, you can turn on / o the
display window and the light of LED buttons.
RPT
j
Repeats playback.
INT
k
Intro scan.
Numeric buttons (1 to 6)
l
Selects a numbered preset station in TUNER.
Battery Installation
1. Pull out the battery holder with a sharp product
like a ball point pen.
2. Put the battery with
battery holder.
3. Push the battery holder back into its original
position.
Note
,
Use only one CR2025 (3 V) lithium battery.
Remove the battery if the remote control is
not used for a long period of time.
Do not leave the product in a hot or humid
place.
Do not handle the battery with metallic
tools.
Do not store the battery with metallic
materials.
and correctly on the
1
Getting Started
Connecting8
About detachable
control panel
[LCS710BR /
LCS710DAB]
2
Attaching the control panel
Connecting
1. Align the left side of the panel with the stopper.
2. Push the right side of panel into the unit until it
clicks.
Caution
>
The control buttons may not work properly
if the control panel is not attached properly.
If this occurs, gently press the display.
Do not leave the control panel in any area
exposed to high temperatures or direct
sunlight.
Do not drop the control panel or otherwise
subject it to strong impact.
Do not allow such volatile agents as
benzine, thinner, or insecticides to come
into contact with the surface of the control
panel.
Detaching the control panel
1. Press the 6 to open the control panel.
2. Push the control panel to right.
3. Pull the control panel out of the unit.
4. Put the detached control panel into the
protective case.
Control panel
Protective Case
Note
,
Periodically wipe the contacts on the back
of the control panel with a cotton swap
moistened with alcohol. For safety, turn o the
ignition before cleaning, and remove the key
from the ignition switch.
Connecting9
About detachable
control panel
[LCF810BR /
LCF810DAB]
Attaching the control panel
A
1. Attach part
of the unit.
2. Attach part C of the control panel to part D
of the unit while pushing the control panel to
left.
3. Close the control panel.
The control buttons may not work properly
if the control panel is not attached properly.
If this occurs, gently press the display.
Do not leave the control panel in any area
exposed to high temperatures or direct
sunlight.
Do not drop the control panel or otherwise
subject it to strong impact.
Do not allow such volatile agents as
benzine, thinner, or insecticides to come
into contact with the surface of the control
panel.
C
Caution
>
of the control panel to part
i
h
k
j
C
B
Detaching the control panel
1. Press the OPEN to open the control panel.
2. Push the control panel to left.
3. Pull the control panel out of the unit.
4. Put the detached control panel into the
protective case.
Control panel
Protective Case
Note
,
Periodically wipe the contacts on the back
of the control panel with a cotton swap
moistened with alcohol. For safety, turn o the
ignition before cleaning, and remove the key
from the ignition switch.
2
Connecting
Connecting10
Installation
Basic Installation
Before installing, make sure that the ignition-switch
is set to OFF and remove the terminal of the car
battery to avoid short-circuiting.
2
Connecting
Bend the claws
according to
the thickness
of the
dashboard.
Control panel
1. Remove the existing receiver unit.
2. Make the necessary connections.
3. Install the installation sleeve.
4. Install the unit into the installation sleeve.
ISO-DIN Installation
Control panel
1. Slide the unit into the ISO-DIN frame.
2. Fit screws removed from the old unit.
3. Slide the unit and frame into the dash opening.
4. Install the dash panel or adapter plate.
(According to models, this step may not be
needed.)
5. Install the trim ring to the unit.
6. Install the control panel to the unit.
Removing the existing receiver
unit
If there is already an installation sleeve for the
receiver unit in the dashboard, it must be removed.
1. Remove the rear support from the unit.
2. Remove the control panel and trim ring from
the unit.
3. Insert the lever into the hole on one side of the
unit. Perform the same operation on the other
side and pull the unit out from the mounting
sleeve.
Connecting11
Connection
Connecting to a car
Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery
to avoid short-circuiting.
Wired remote input (Black): Hard-wired control adapter can be connected.
Wired mic (Optional)
abc d
abc d
efgh
efgh
B f Power Antenna (Blue)
B g Dimmer (Pink)
B c To Ignition (Red)
B d To Battery (+) (Yellow)
B h Ground (-) (Black)
B e Remote On
(Blue / White)
B b Phone Mute
(Orange)
B a Not connected
(Optional)
To Audio out
Sub-woofer Left Sub-woofer Right
Front Left Front Right
Rear Left Rear Right
SMB type of DAB Antenna can be connected.
Power
(Only LCS710DAB / LCF810DAB)
Antenna
Control Relay
Dimmer Switch
Ignition Switch
Ampli er
A a Gray : Front Right +
A b Gray / Black Stripe: Front Right -
A c Violet : Rear Right +
A d Violet / Black Stripe: Rear Right -
A e White : Front Left +
A f White / Black Stripe: Front Left -
A g Green : Rear Left +
A h Green / Black Stripe: Rear Left -
To Audio in
A
a
A
b
A
c
A
d
A
e
A
f
A
g
A
h
2
Connecting
Sub-woofer
Ampli er
Loading...
+ 23 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.