LG LBN10551SW Owners Manual

LG Customer Information Center
For inquires or comments, visit www.lg.com or call;
1-800-243-0000 USA, Consumer User 1-888-865-3026 USA, Commercial User 1-888-542-2623 CANADA
Register your product Online!
www.lg.com
ENGLISH
LBN10551** LBN12551**
P/NO.: MFL67783564
www.lg.com
345
Universal section (not in all models)
(not in all models)
Removable glass shelf
refrigeration system
Vitamin Plus system (not in all models)
vegetables and fruits
Separator for foodstuffs
(not in all models)
freezing compartment
Display
LED lamp
Multi-flow
Drawer for
Ice tray
Drawers of
Section for dairy products (not in all models)
Egg tray
Door baskets
Separator for bottles (not in all models)
Door basket for 2L bottles
Height-adjustable foot
Note
If you find some parts missing from your unit, they may be parts only used in other models.
6
CONNECTION
• Install the limit stops to the upper corners on the rear wall of the refrigerator as shown in Fig.1. The stops are supplied in the door basket inside the refrigeration compartment;
• Choose the suitable place. Locate the refrigerator in a place convenient for its use;
• The refrigerator is not a built-in appliance. Free space not less than 5 cm should be provided from above, from its rear and side faces for air circulation and reduction of power consumption. Fig.2;
• Do not install the refrigerator near heat sources and in a zone exposed to direct sunlight or high humidity;
• Make sure that electrical voltage indicated in the manual meets the parameters of your mains;
• Do not remove the round stickers on the rear side of the refrigerator. They have a decorative function closing the fabrication holes;
• To exclude vibration, check the refrigerator installation using a level. If necessary, turn the adjustable feet to compensate irregularity of the floor. To ensure better closing of the door, the refrigerator should be slightly inclined backwards. To turn the adjustable feet, slightly incline the refrigerator.
• Before use, carefully wash the refrigerator;
• Install the removable parts, such as ice tray, etc. to the appropriate places. It is necessary to prevent possible damages during transportation;
• Insert the power cord plug to the power outlet. Do not power other electric appliance from the same outlet.
forward backward
Figure 1. Installation of limit stops
Figure 2. Installation of refrigerator to wall
NOTE
The limit stops are located in the door basket of the refrigeration compartment.
They should be installed to get higher operational efficiency of the refrigerator.
After first installation of the refrigerator, let it work for 2-3 hours for stabilization of the operating temperature inside and only then fill the refrigerator with fresh or frozen foodstuffs. After disconnection of the refrigerator from the mains, wait at least 5 minutes to switch on it again. Now, the refrigerator is ready for service.
7
Loading...
+ 17 hidden pages