LG L53SK2, MIB2PQ User Manual

CONFIDENTIAL

not for distribution

CONFIDENTIAL

not for distribution

Composition Touch, Composition Colour

Radio

Composition Touch, Composition Colour: Radio Stand: 21.08.2013 Englisch: 11.2013 Artikel-Nr.: 142.5R6.RCT.20



1425R6RCT20

L40SK2 L41SK2 L52SK2

LSK2

L

SK2

CONFIDENTIAL

not for distribution

CONFIDENTIAL

not for distribution

Description of symbols



Refers to a section within a chapter that contains important information and safety notes  that should always be observed.



Indicates that the section is continued on the next page.



Indicates the end of a section.



Indicates situations in which the vehicle must be stopped as quickly as possible.

® ™ Indicates a registered trademark. Howev-

er, the absence of this symbol does not constitute a waiver of the rights concerning any term.

⇒ Symbols like these refer you to warnings

within the same section or on a given page. They draw your attention to possible risks of accident or injury and explain how they can be avoided.

⇒

⇒ Cross reference to information about pos-

sible damage to your vehicle within the same section or on a given page.

DANGER

Texts with this symbol indicate dangerous situations which will lead to fatal or severe injuries if you do not observe the warning.

WARNING

Texts with this symbol indicate dangerous situations which could lead to fatal or severe injuries if you do not observe the warning.

CAUTION

Texts with this symbol indicate dangerous situations which could lead to slight or severe injuries if you do not observe the warning.

NOTICE

Texts with this symbol indicate situations which could cause damage to the vehicle or vehicle equipment if you do not observe the warning.

Texts with this symbol contain additional information on the protection of the environ-

ment.

Texts with this symbol contain additional information.

Volkswagen AG works continuously to develop and further improve all models. Please understand that we must therefore reserve the right to alter any part of the vehicle and its equipment or technical specifications at any time. The data provided concerning scope of delivery, appearance, performance, dimensions, weights, fuel consumption, standards and vehicle functions are all correct at the time of going to print. Some of the equipment described might not yet be available in a particular vehicle (information can be provided by your local Volkswagen dealership), and some equipment may not be available in certain countries. No legal commitment may be inferred from the information, illustrations or descriptions in this manual.

No part of this manual may be reprinted, reproduced or translated without the written permission of Volkswagen AG.

All rights under the laws of copyright are expressly reserved by Volkswagen AG. Subject to alteration and amendment.

Printed in Germany.

This paper was bleached without the use of chlorine.

FCC Compliance Statement [Level 4]

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turn-ing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution:

Any changes or modifications in construction of this device which are not expressly

approved by the party responsible for compliance could void the user’s authority to operate

the equipment.

This Class B digital apparatus complies with Canadian ICES-003 “To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.”

Cet appareil numérique de la classe B est conforme à la norme NMB-003 «Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit être utilisé à l'intérieur et devrait être placé loin des fenêtres afin de fournir un écran de blindage maximal. Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une licence.»

Operation is subject to the following two conditions :

(1) This device may not cause Interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

PRODUCTSPECIFICATION

 

MODEL L40SK2 L41SK2 L52SK2 L53SK2 L54SK2

Dimensions(mm)

W

Dimensions(mm)

H

Dimensions(mm)

D

Weight(KG) 1.81 1.61 1.58 1.86 1.67

297.2 295.7 275.8 314.9 256.9

159 120.8 155.5 160.3 133.2

205.2 209.5 201.6 209.4 209.5

PowerRequirement 9V~18V 9V~18V 9V~18V 9V~18V 9V~18V

PowerConsumption 20W*4CH 20W*4CH 20W*4CH 20W*4CH 20W*4CH

    

Bluetooth Specification

Standard Bluetooth Version 2.1

Frequency Range 2400 ~ 2483.5 MHz

Output Power (Max.) +4 dBm Max.

CONFIDENTIAL

not for distribution

About this manual

● An alphabetical index is included at the end of this manual.

● A list of abbreviations explains technical abbreviations and terms.

● Directions and positions (e.g. right, left, front, rear) are normally relative to the vehicle's direction of travel.

● Illustrations help with orientation and should be regarded as a general guide.

● In right-hand drive vehicles the controls may sometimes be different to those displayed in illustrations or described in the text.

All equipment and models are described without indicating whether the equipment is optional or specific to the model type. This means that some

of the equipment described might not be fitted in your vehicle. Your Volkswagen dealership can provide more information on this.

All details provided in this manual correspond to the information available at the time of going to print and apply only to factory-fitted infotainment systems. Due to continuous technical improvement of the infotainment system and possible updates to the unit's software, the displays and functions on the infotainment system may differ from the details given in this manual. No claims may be derived from the differing details, illustrations or descriptions.

Please ensure that this manual is in the vehicle if you lend or sell the vehicle to someone else.



Composition Touch, Composition Colour2

CONFIDENTIAL

not for distribution

Introduction

Before using the unit for the first time

Before using the infotainment system for the first time, carry out the following steps. This will enable you to use the infotainment system safely and make full use of the functions it provides:



Observe safety notes  ⇒ page 3.



Familiarise yourself with the controls for the infotainment system ⇒ page 7.



In the

System setup

, reset the infotainment system to its original condition (factory settings)

⇒

page 40.



Use suitable data storage devices for media mode ⇒ page 20.



Safety information for the infotainment system

WARNING

Accidents and injuries can occur if the driver is distracted. Operating the infotainment system can distract you from the road.

● Always drive carefully and responsibly.

● Select volume settings that allow signals from outside the vehicle (such as emergency services sirens) to be easily heard at all times.

● Setting the volume too high may damage your hearing. This also applies even if you are only exposed to high volumes for short periods.

WARNING

The volume level may suddenly change when you switch audio source or connect a new audio source.

● Reduce the base volume before switching audio source or connecting a new audio source.

WARNING

Connecting, inserting or removing a storage device while the vehicle is in motion can distract you from the road and lead to accidents.

WARNING

Connecting leads for external devices may obstruct the driver.

● Arrange the connecting leads so that they do not obstruct the driver.

WARNING

External devices that are placed loose in the vehicle or not properly secured can be flung though the interior and cause injuries during a sudden driving or braking manoeuvre, or in the event of an accident.

● You should never position or attach an external device on a door, on the windscreen or above or near to the areas marked “AIRBAG” on the steering wheel, the dash panel and the seat backrests, or between these areas and the vehicle occupants. External devices can cause serious injury in an accident, especially when the airbags deploy.

WARNING

The armrest may obstruct the driver's arm movements, which could cause accidents and severe injuries.

● Always keep the armrest down while the vehicle is in motion.

WARNING

Opening the housing on a CD player can lead to injuries from invisible laser radiation.

● CD players should only be repaired by a qualified workshop.

NOTICE

The infotainment system can be damaged by incorrect insertion of a storage device or insertion of an incompatible storage device.



Introduction 3

142.5R6.RCT.20

CONFIDENTIAL

not for distribution

NOTICE (Continued)

● When inserting a memory card, ensure that it is correctly positioned ⇒ page 20.

● Applying force may destroy the memory card slot's locking mechanism.

● Only use suitable memory cards.

● When inserting and removing a CD, always hold it flat and at a right angle to the front of the unit. Inserting or removing a CD at an angle to the drive can lead to scratching ⇒ page 20.

● Inserting a second CD while a CD is already in the CD drive or being ejected can destroy the CD drive in the unit. Always wait until the CD is completely ejected!

NOTICE

The CD drive can be damaged by any foreign objects attached to a storage device, and by irregularly shaped storage devices.

NOTICE (Continued)

● Only clean 12 cm standard CDs should be used.

– Do not affix stickers or other items to the data storage device. Stickers may peel off and damage the CD drive.

– Do not use printable data storage devices. Coatings and prints may peel off and damage the drive.

– Do not insert 8 cm single CDs or irregularly shaped CDs or DVDs.

– Do not insert DVD Plus discs, dual discs or flip discs, as these are thicker than normal CDs.

NOTICE

The vehicle loudspeakers may be damaged if the volume is too high or the sound is distorted.



Composition Touch, Composition Colour4

CONFIDENTIAL

not for distribution

Introduction 5

142.5R6.RCT.20

CONFIDENTIAL

not for distribution

Overview of the control elements

Fig. 1 Overview of the control elements

Dif

ferent versions of the infotainment system are supplied. The labelling and functions of the infotainment

buttons ⇒ Fig. 1

2

and the position of the CD slot 5 may vary between versions.

 Rotary/push knob:

– Press to switch on or of

f ⇒ page 7.

– Turn to adjust the basic volume on whichever source is in use ⇒ page 7. Infotainment buttons: press a button to select a function.

–

RADIO

: switches to radio mode and changes frequency band in radio mode ⇒

page 12.

–

MEDIA

: switches to media mode ⇒

page 20.

–

CAR

: opens vehicle and system settings ⇒

Booklet Owner's manual, chapter Introduction to the in-

fotainment system.

–

SETUP

: opens menu and system settings ⇒

page 40.

–

SOUND

: opens sound and volume settings ⇒

page 40.

–

EJECT

: ejects the CD ⇒ page 20.

–

MUTE

: mute the audio source ⇒

page 8.

–

PHONE

: opens the telephone control system ⇒ page

30. The current audio source is muted if no

mobile telephone provision is installed.

Touchscreen ⇒ page 7. Setting knob: the function of this button depends on the unit's operating state.

– In all radio modes: turn for manual station or channel selection. Press to start and stop the scan

function ⇒ page 12. – In media mode: turn to open the track list. Press to start and stop the scan function ⇒ page 20. – Turn to select menu options in long lists and press to access the selected option (e.g. select a sta-

tion from the station list).

CD slot: for inserting and removing CDs ⇒ page 20. AUX-IN socket: for connecting an external audio source ⇒ page 20. Memory card slot: the slot is located underneath or to the left of the screen, depending on the unit

version ⇒ page 20.



1

2

3 4

5 6 7

Composition Touch, Composition Colour6

CONFIDENTIAL

not for distribution

Overview of the control elements

Fig. 1 Overview of the control elements

Dif

ferent versions of the infotainment system are supplied. The labelling and functions of the infotainment

buttons ⇒ Fig. 1

2

and the position of the CD slot 5 may vary between versions.

 Rotary/push knob:

– Press to switch on or of

f ⇒ page 7.

– Turn to adjust the basic volume on whichever source is in use ⇒ page 7. Infotainment buttons: press a button to select a function.

–

RADIO

: switches to radio mode and changes frequency band in radio mode ⇒

page 12.

–

MEDIA

: switches to media mode ⇒

page 20.

–

CAR

: opens vehicle and system settings ⇒

Booklet Owner's manual, chapter Introduction to the in-

fotainment system.

–

SETUP

: opens menu and system settings ⇒

page 40.

–

SOUND

: opens sound and volume settings ⇒

page 40.

–

EJECT

: ejects the CD ⇒ page 20.

–

MUTE

: mute the audio source ⇒

page 8.

–

PHONE

: opens the telephone control system ⇒ page

30. The current audio source is muted if no

mobile telephone provision is installed.

Touchscreen ⇒ page 7. Setting knob: the function of this button depends on the unit's operating state.

– In all radio modes: turn for manual station or channel selection. Press to start and stop the scan

function ⇒ page 12. – In media mode: turn to open the track list. Press to start and stop the scan function ⇒ page 20. – Turn to select menu options in long lists and press to access the selected option (e.g. select a sta-

tion from the station list).

CD slot: for inserting and removing CDs ⇒ page 20. AUX-IN socket: for connecting an external audio source ⇒ page 20. Memory card slot: the slot is located underneath or to the left of the screen, depending on the unit

version ⇒ page 20.



1

2

3 4

5 6 7

Composition Touch, Composition Colour6

CONFIDENTIAL

not for distribution

Overview of the control elements

Fig. 1 Overview of the control elements

Dif

ferent versions of the infotainment system are supplied. The labelling and functions of the infotainment

buttons ⇒ Fig. 1

2

and the position of the CD slot 5 may vary between versions.

 Rotary/push knob:

– Press to switch on or of

f ⇒ page 7.

– Turn to adjust the basic volume on whichever source is in use ⇒ page 7. Infotainment buttons: press a button to select a function.

–

RADIO

: switches to radio mode and changes frequency band in radio mode ⇒

page 12.

–

MEDIA

: switches to media mode ⇒

page 20.

–

CAR

: opens vehicle and system settings ⇒

Booklet Owner's manual, chapter Introduction to the in-

fotainment system.

–

SETUP

: opens menu and system settings ⇒

page 40.

–

SOUND

: opens sound and volume settings ⇒

page 40.

–

EJECT

: ejects the CD ⇒ page 20.

–

MUTE

: mute the audio source ⇒

page 8.

–

PHONE

: opens the telephone control system ⇒ page

30. The current audio source is muted if no

mobile telephone provision is installed.

Touchscreen ⇒ page 7. Setting knob: the function of this button depends on the unit's operating state.

– In all radio modes: turn for manual station or channel selection. Press to start and stop the scan

function ⇒ page 12. – In media mode: turn to open the track list. Press to start and stop the scan function ⇒ page 20. – Turn to select menu options in long lists and press to access the selected option (e.g. select a sta-

tion from the station list).

CD slot: for inserting and removing CDs ⇒ page 20. AUX-IN socket: for connecting an external audio source ⇒ page 20. Memory card slot: the slot is located underneath or to the left of the screen, depending on the unit

version ⇒ page 20.



1

2

3 4

5 6 7

Composition Touch, Composition Colour6

CONFIDENTIAL

not for distribution

Overview of the control elements

Fig. 1 Overview of the control elements

Dif

ferent versions of the infotainment system are supplied. The labelling and functions of the infotainment

buttons ⇒ Fig. 1

2

and the position of the CD slot 5 may vary between versions.

 Rotary/push knob:

– Press to switch on or of

f ⇒ page 7.

– Turn to adjust the basic volume on whichever source is in use ⇒ page 7. Infotainment buttons: press a button to select a function.

–

RADIO

: switches to radio mode and changes frequency band in radio mode ⇒

page 12.

–

MEDIA

: switches to media mode ⇒

page 20.

–

CAR

: opens vehicle and system settings ⇒

Booklet Owner's manual, chapter Introduction to the in-

fotainment system.

–

SETUP

: opens menu and system settings ⇒

page 40.

–

SOUND

: opens sound and volume settings ⇒

page 40.

–

EJECT

: ejects the CD ⇒ page 20.

–

MUTE

: mute the audio source ⇒

page 8.

–

PHONE

: opens the telephone control system ⇒ page

30. The current audio source is muted if no

mobile telephone provision is installed.

Touchscreen ⇒ page 7. Setting knob: the function of this button depends on the unit's operating state.

– In all radio modes: turn for manual station or channel selection. Press to start and stop the scan

function ⇒ page 12. – In media mode: turn to open the track list. Press to start and stop the scan function ⇒ page 20. – Turn to select menu options in long lists and press to access the selected option (e.g. select a sta-

tion from the station list).

CD slot: for inserting and removing CDs ⇒ page 20. AUX-IN socket: for connecting an external audio source ⇒ page 20. Memory card slot: the slot is located underneath or to the left of the screen, depending on the unit

version ⇒ page 20.



1

2

3 4

5 6 7

Composition Touch, Composition Colour6

CONFIDENTIAL

not for distribution

Overview of the control elements

Fig. 1 Overview of the control elements

Dif

ferent versions of the infotainment system are supplied. The labelling and functions of the infotainment

buttons ⇒ Fig. 1

2

and the position of the CD slot 5 may vary between versions.

 Rotary/push knob:

– Press to switch on or of

f ⇒ page 7.

– Turn to adjust the basic volume on whichever source is in use ⇒ page 7. Infotainment buttons: press a button to select a function.

–

RADIO

: switches to radio mode and changes frequency band in radio mode ⇒

page 12.

–

MEDIA

: switches to media mode ⇒

page 20.

–

CAR

: opens vehicle and system settings ⇒

Booklet Owner's manual, chapter Introduction to the in-

fotainment system.

–

SETUP

: opens menu and system settings ⇒

page 40.

–

SOUND

: opens sound and volume settings ⇒

page 40.

–

EJECT

: ejects the CD ⇒ page 20.

–

MUTE

: mute the audio source ⇒

page 8.

–

PHONE

: opens the telephone control system ⇒ page

30. The current audio source is muted if no

mobile telephone provision is installed.

Touchscreen ⇒ page 7. Setting knob: the function of this button depends on the unit's operating state.

– In all radio modes: turn for manual station or channel selection. Press to start and stop the scan

function ⇒ page 12. – In media mode: turn to open the track list. Press to start and stop the scan function ⇒ page 20. – Turn to select menu options in long lists and press to access the selected option (e.g. select a sta-

tion from the station list).

CD slot: for inserting and removing CDs ⇒ page 20. AUX-IN socket: for connecting an external audio source ⇒ page 20. Memory card slot: the slot is located underneath or to the left of the screen, depending on the unit

version ⇒ page 20.



1

2

3 4

5 6 7

Composition Touch, Composition Colour6

CONFIDENTIAL

not for distribution

General information on operating the unit



Introduction

This chapter contains information on the following subjects:

Rotary/push knobs and infotainment buttons .7 Switching on and off

. . . . . . . . . . . . . . . . . . . . .

7

Adjusting base volume

. . . . . . . . . . . . . . . . . . .

8

Operating function buttons and displays on the screen

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

Selecting list entries and browsing lists

. . . . .

9

Input windows with on-screen keypad

. . . . . .

10

Additional display information and display options

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

Changes to settings may cause the display content to vary and some aspects of the infotainment system operation to differ from the descriptions given in this manual.

Additional information and warnings:

● Safety information  for infotainment system

⇒

page 3

● Overview of the control elements ⇒ page 6

Lightly pressing the buttons or briefly touching the touchscreen is sufficient to operate

the infotainment system.

Not all listed function buttons and functions

may be available due to the device software used in your market. The equipment is not faulty if a function button is missing from the screen.

Due to country-specific legislation, certain

functions cannot be selected on the screen when the vehicle is travelling above a certain speed.

Using a mobile telephone in the vehicle may

cause noise from the vehicle loudspeakers.

There may be restrictions on the use of Blue-

tooth® devices in some countries. Information is available from the local authorities.

In some vehicles equipped with ParkPilot, the

volume of the current audio source is automatically lowered when reverse gear is engaged. Volume reduction can be set in the

Sound setup

menu⇒ page 42.



Rotary/push knobs and infotainment buttons

First read and observe the safety warnings on page 3 and the introductory

information on page 7.

Rotary/push knobs

The left-hand rotary/push knob  ⇒ Fig. 1 1 is referred to as the volume control or the on/off switch.

The right-hand rotary/push knob ⇒ Fig. 1 4 is referred to as the setting knob.



Infotainment buttons

This manual uses a button symbol with blue content and the term “infotainment button” to refer to buttons on the infotainment system, e.g. the infotainment button

MEDIA

.

Infotainment buttons are operated either by press- ing them or by pressing and holding.



Switching on and off

First read and observe the safety warnings on page 3 and the introductory

information on page 7.

To switch the infotainment system on or off manually, briefly press the rotary/push knob



⇒

Fig. 1 1.



After switching on, the system starts at the last selected volume setting, provided that this does not exceed the preselected maximum switch-on volume ⇒ page 42, Sound and volume settings.

Depending on the unit version and the country, the infotainment system may switch off automatically when the engine is switched off or the vehicle key



Introduction 7

142.5R6.RCT.20

CONFIDENTIAL

not for distribution

is removed from the ignition lock. If the infotainment system is switched on again, it will switch off automatically after approximately 30

minutes

(switch-off delay).

The infotainment system is permanently linked to the vehicle. It cannot be used in an-

other vehicle.

If the vehicle battery has been disconnected, the ignition must be switched on before

switching the infotainment system back on.



Adjusting base volume

First read and observe the safety warnings on page 3 and the introductory information on page 7.

Function: action Increasing the volume: turn the volume control  ⇒ Fig. 1 1 clockwise or press the  button on the

multifunction steering wheel ⇒ Booklet Owner's manual

.

Decreasing volume: turn the volume control  ⇒ Fig. 1

1

anticlockwise or press the  button on the

multifunction steering wheel.



Changes to the base volume are indicated by a “bar” on the screen. During this time the infotainment system cannot be operated.

It is possible to preset certain volume settings and adjustments ⇒ page

42.

Muting the infotainment system

● Turn the volume control  ⇒ Fig. 1

1

anti-

clockwise until

 is displayed.

● OR: press the

MUTE

infotainment system but-

ton1) ⇒ Fig. 1 2.

Any media source currently being played is stopped while the infotainment system is muted.  appears on the display.

If the base volume has been considerably in-

creased to play a certain audio source, reduce the volume again before switching to another audio source.



Operating function buttons and displays on the screen

1)

Depending on the unit version.

Composition Touch, Composition Colour8

CONFIDENTIAL

not for distribution

Inactive (grey) function buttons cannot be selected.

Overview of displays and function buttons

Displays and function buttons: action and effect

A

In the title bar, the currently selected menu and any other possible function buttons are displayed.

B

Touch to open a further menu.

C

Move the crosshair across the screen with slight pressure without losing contact. OR: touch the desired position on the screen, the crosshair moves to this position.



Touch to move up one level at a time from certain lists.



Touch to move up one level at a time to the main menu from a submenu or to undo inputs made.

... 

Touch to open a pop-up window (option window), displaying further setting options.

 ...

/

 ...

Some functions or displays are marked with a checkbox and are activated 

or deacti-

vated  by touching this box.

OK

Touch to confirm an input or selection.



Touch to close a pop-up window or an input window.

+

/

-

Touch to change settings incrementally.



Move the slider across the screen with slight pressure without losing contact.



Selecting list entries and browsing lists

Fig. 3 List entries settings menu

First read and observe the safety warnings on page 3 and the introductory

information on page

7.

List entries can be opened by touching them directly on the screen or by using the setting knob

⇒ Fig. 1 4.

Marking and selecting list entries with the setting knob

● Turn the setting knob to mark each consecutive list entry with a selection box so you can browse through the list.

● Press

the setting knob to select the marked list

entry.



Browsing lists (scrolling)

If there are more items available in a list view than can be displayed on the screen, function buttons for scrolling or a scroll bar are displayed on the right of the screen ⇒

Fig. 3.

● Browsing lists line-by-line: touch the



or



function button briefly.

● Browsing lists page-by-page: briefly touch the screen above or below the scroll marker

.

● Browsing long lists quickly page-by-page: touch and hold the screen above or below the scroll marker.

● To quickly scan through a long list, place your finger on the scroll marker and move it over the screen without losing contact. Lift your finger off the screen when you reach the desired position.



Introduction

9

142.5R6.RCT.20

LG L53SK2, MIB2PQ User Manual

Description of symbols

Table of Contents

About this manual

Introduction

Before using the unit for the first time

Safety information for the infotainment system

Overview of the control elements

General information on operating the unit

Introduction

Rotary/push knobs and infotainment buttons

Switching on and off

Adjusting base volume

Operating function buttons and displays on the screen

Selecting list entries and browsing lists