LG L5213R-BP User Guide

INSTALLATION MANUAL

Color Camera

Please read this manual carefully before operating your set and retain it for future reference.

MODELS

L5213R-BN/BP/DN

P/NO : COV30407201

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead symbol within an equilateral triangle is intended

to alert the user to the presence of uninsulated dangerous voltage within the product’

s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

FCC WARNING: This equipment may generate or use radio frequency energy. Changes or

modications to this equipment may cause harmful interference unless the modications are

expressly approved in the instruction manual. The user could lose the authority to operate this

equipment if an unauthorized change or modication is made.

Regulatory Notices For U.S.A

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

• A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of this product

in the end user.

• Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the same or

equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

• Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces or

shall be provided with brushings.

Warning: Do not install this equipment in a conned space such as a bookcase or similar unit. Warning: Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA 70. Warning: This is a class A product. In a domestic

environment this product may cause radio interference in which case the user may be required to take adequate measures.

Warning: To reduce a risk of re or electric shock, do not expose this product to rain or moisture. Caution: This installation should be made by a qualied service person and should conform to all

local codes.

Caution: To avoid electrical shock, do not open the cabinet. Refer servicing to qualied personnel

only.

Caution: The apparatus should not be exposed to water (dripping or splashing) and no objects lled

with liquids, such as vases, should be placed on the apparatus.

Important Safety Instructions

1. Read these instructions. - All these safety and

operating instructions should be read before the product is operated.

2. Keep these instructions. - The safety, operating and use instructions should be retained for future reference.

3. Heed all warnings. - All warnings on the product and in the operating instructions should be adhered to.

4. Follow all instructions. - All operating and use instructions should be followed.

5. Do not use this apparatus near water. - For example: near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet basement; near a swimming pool; etc.

6. Clean only with dry cloth. - Unplug this product from the wall outlet before cleaning.

Do not use liquid cleaners.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. - Slots and openings in the cabinet are provided for ventilation, to

ensure reliable operation of the product, and to protect it from over- heating. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided and the manufacturer’s instructions have been adhered to.

8. Do not install near any heat sources such as radiators, heat registers, stoves,

or other apparatus (including ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided

for your safety. If the provided plug does not t into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/ accessories specied by the manufacturer.

12. Use only the cart, stand, tripod, bracket, or table specied by the

manufacturer, or sold with apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injur from tip-over.

13. Unplug this apparatus during lightning storms or when unused for

long periods of time.

14. Refer all servicing to qualied service personnel. Servicing is required when

the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

ACCESSORIES FURNISHED

1 DOME CAMERA 4 SCREW

VIDEO OUTPUT

TEST CABLE

INSTALLATION

MANUAL

5 TEMPLATE

PARTS LIST

PART NAME

TEMPLATE

Housing Botton

Holder Panning

Holder Tlit

Holder Rotate

Cover LED

Housing Top

Cover, Dome

SPECIFICATIONS

Model L5213R-BP L5213R-BN/DN Signal System PAL NTSC Total Pixels No. /

Effective Pixels No. Image Device 1/3" CCD (ICX638/639BK) DSP XDI-S2 Lens 2.8~11mm Vari-focal lens Digital Zoom X8 Sync. System Internal

Scanning Frequency (H/V) 15.625 KHz / 50 Hz 15.734 KHz / 59.94 Hz

Horizontal Resolution 620 TV Lines S/N Ratio 52dB Minimum Illumination

(30 IRE) Control Method Inner Key button Video Output Signal 1Vp-p Composite (75Ω) Day & Night ICR Day / Night / Auto WDR(BLC) OFF / BLC / HSBLC DNR 3D-DNR (Off/Low/Middle/High) Auto Gain Control Off / Low / Middle / High Electronic Shutter Speed 1/50 ~1/90,000 1/60 ~1/90,000 Electronic Sensitivity OFF/Auto ( x2, x3, x4,…..x 128 )

White Balance

Motion Detection 4 Zones Privacy Zone Masking 8 Masks Stabilizer(EIS) On / Off User Color Mode Standard / Cool / Warm / Vivid Multi OSD Language 15 Languages

Power Consumption

Operation Temp./Humidity -10 ºC ~ 50 ºC ( 0%RH ~ 80%RH ) Storage Temp./Humidity -20 ºC ~ 60 ºC ( 0%RH ~ 85%RH ) Weight 342g Dimension 96.9(H) x Ø135.0 Accessory TEMPLATE

Dual

DC12V

LED ON

LED OFF

LED ON

LED OFF

470K / 440K 410K / 380K

0 Lux (IR LED On)

IR LED Distance : 25 m

ATW / One Push / Manual

(1,700ºk ~ 11,000ºk)

DC12V ±10% Max. 470mA / AC24V ±10% Max.450mA / 6.0W DC12V ±10% Max. 210mA / AC24V ±10% Max.235mA / 3.0W

- DC12V ±10% Max. 390mA

- DC12V ±10% Max. 160mA

INSTALLATION

Installing the camera on a ceiling or wall

󰎐. Afﬁx the mounting template(supplied) to the mounting surface.

󰎑. Secure the camera mounting bracket to the position where the camera

should be mounted with the supplied screws.

Tapping Type ø4x20mmx3ea

(Supplied)

Tapping Type ø2x7mmx1ea

(Supplied)

󰎒. Adjust the camera lens to face the area to be monitored and ﬁx the main body and the dome cover by aligning the grooves and rotating the body clockwise.

ADJUSTMENT

Service Video connector

The Service Video Connector also provides the installer with an easy way of conﬁguring the camera.

1. Having a better view , adjust the camera

• Rotate angle : 360˚

• Panning angle : 360˚

• Tilting angle : 80˚(Viewable operation tilt angle 60˚~65˚)

ROTATE 360˚

PAN 360˚

2. Follow the instruction provided below to make any lens adjustments.

• Loosen the Zoom & Focus screws.

• Using the screw, move it LEFT or RIGHT to the desired position.

• Once the desired adjustments have been made, tighten the screw to lock in place.

• Adjust the Field of View by moving the screw towards the LEFT(Tele) to

zoom in, or towards the RIGHT(Wide) to zoom out.

• Adjust the Focus the same way as described above after the desired zoom

position is established.

TILT 80˚

(Viewable operation

tilt angle 60˚~65˚)

Service Monitor

Diffused reflection can occur when IR is covered. In this case, the setting as below is required.

SPECIAL

1. 180˚rotation in LED Part as shown in the picture

LANGUAGE COLOR EFFECT SHARPNESS STABILIZER D-ZOOM D-EFFECT MOTION DET FACTORY RESET RETURN

2. OSD MENU Setting SPECIAL: D-EFFECT ; ROTATE

ENG ON

34 ………I……

OFF OFF ROTATE OFF

Caution: Be careful not to cover the sensor when installing a device.

Focus: Far ← → Near Zoom: Tele ← → Wide

NEAR

FAR

TELE

WIDE