LG L5213R-BP Owner’s Manual
OWNER’S MANUAL
Color Video Camera
Please read this manual carefully before operating
your set and retain it for future reference.
MODELS
L5213R-BN
L5213R-BP
L5213R-DN
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated dangerous voltage within the product’s enclosure that
may be of sucient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
2
FCC WARNING: This equipment may generate or use radio
frequency energy. Changes or modications to this equipment may cause harmful interference unless the modications are expressly approved in the instruction manual. The
user could lose the authority to operate this equipment if an
unauthorized change or modication is made.
Regulatory Notices For U.S.A
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
• A suitable conduit entries, knock-outs or glands shall be
provided in the cable entries of this product in the end
user.
• Caution: Danger of explosion if battery is incorrectly re
placed. Replaced only with the same or equivalent type
recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s instructions.
• Holes in metal, through which insulated wires pass,
shall have smooth well rounded surfaces or shall be
provided with brushings.
Warning: Do not install this equipment in a conned space
such as a bookcase or similar unit.
Warning: Wiring methods shall be in accordance with the
National Electric Code, ANSI/NFPA 70.
Warning: This is a class A product. In a domestic
environment this product may cause radio interference in
which case the user may be required to take adequate measures.
Warning: To reduce a risk of re or electric shock, do not
expose this product to rain or moisture.
Caution: This installation should be made by a qualied
service person and should conform to all local codes.
Caution: To avoid electrical shock, do not open the cabinet.
Refer servicing to qualied personnel only.
Caution: The apparatus should not be exposed to water
(dripping or splashing) and no objects lled with liquids, such
as vases, should be placed on the apparatus.
3
Disposal of your old appliance
1. When this crossed-out wheeled bin
symbol is attached to a product it means the
product is covered by the European Directive
2002/96/EC.
2. All electrical and electronic products
should be disposed of separately from the
municipal waste stream via designated
collection facilities appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative
consequences for the environment and
human health.
4. For more detailed information about
disposal of your old appliance, please contact your city oce, waste disposal service or
the shop where you purchased the product.
4
LG Electronics hereby declares that this/
these product(s) is/are in compliance with
the essential
requirements and other relevant provisions
of Directive 2004/108/EC, 2006/95/EC, and
2009/125/EC.
European representative :
LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere,
The Netherlands (Tel : +31-(0)36-547-8888)
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accord
ance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
ampliers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not t into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specied by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving
the cart/apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally,
or has been dropped.
5
Cautions for Safe Operation
Power Supply
L5213R-BP/L5213R-BN:
This camera must always be operated a AC 24 V or DC 12 V
Certied/Listed, class 2 power supply only.
L5213R-DN:
This camera must always be operated a DC 12
Handling of the unit
Be careful not to spill water or other liquids on the unit. Be
cautions not to get combustible or metallic material inside
the body. If used with foreign matter inside, the camera is
liable to fail or to get cause of re or electric shock.
• Remove dust or dirt on the surface of the lens with a
blower.
• Use a dry soft cloth to clean the body. If it is very dirty,
use a cloth dampened with a small quantity of neutral
detergent then wipe dry.
6
• Avoid the use of volatile solvents such as thinners,
alcohol, benzene and insecticides. They may damage the
surface nish and/or impair the operation of the camera.
Operating and storage location
Avoid viewing a very bright object (such as light ttings) during an extended period. Avoid operating or storing the unit in
the following locations.
• Extremely hot or cold places (operating temperature
-10 °C to 50 °C, however, we recommend that the unit be
used within a temperature range of 0 °C to 45 °C)
• Damp or dust place
• Places exposed to rain
• Places subject to strong vibration
• Close to generators of powerful electromagnetic radia
tion such as radio or TV transmitters.
Contents
Features ................................................................................. 8
Part Names and Functions ................................................... 9
Connections ........................................................................ 10
Basic connection ............................................................................ 10
Installation
Menu Operation ..
......................................................................... 11
Installing the camera on a ceiling or wall ..................................11
Adjustment .............................................................................................13
................................................................15
OSD Menu Overview ......................................................................16
General Operation ..........................................................................18
Setting the USER TITLE ..................................................................18
Exposure Settings ...........................................................................19
BACKLIGHT setting ..............................................................19
BRIGHTNESS setting ........................................................... 20
AGC (Automatic Gain Control) setting .......................... 21
SHUTTER (Shutter Speed) setting .................................. 21
SENS-UP setting .................................................................. 22
White Balance settings .................................................................. 22
3D-DNR Setting.............................................................................. 24
Day/Night Setting .......................................................................... 24
Privacy Setting ................................................................................ 25
Special Menu Settings ............................................................... 26
LANGUAGE Setting ............................................................ 27
Setting the COLOR EFFECT ............................................... 27
Setting the SHARPNESS eect ......................................... 28
STABILIZER setting .............................................................. 28
Setting the D-ZOOM (Digital Zoom ) leve .................... 29
Setting the D-EFFECT (Digital eect .............................. 29
Motion Detection Setting ........................................................ 30
Factory Reset Setting ................................................................. 31
Specication .......
................................................................ 32
7
Features
This Color Video Camera is designed for installation in an
indoor video surveillance system.
This manual contains instructions on how to install and manage the Color Video Camera in your video surveillance system.
Should you require any technical assistance, please contact
authorized service center.
• High resolution and high sensitivity with a 6 mm CCD.
• Day & Night function.
• BLC covers various light conditions.
• Excellent signal-to-noise ratio of 52 dB.
• Power Supply : Automatically switch between
DC 12 V and AC 24 V
8
Accessories
DOME CAMERA
VIDEO OUTPUT
TEST CABLE
SCREW
TEMPLATE
Part Names and Functions
- Dome Cover
- Photo Cell
- LED(30ea)
- Video Output Jack
- Power Input Jack
Supplies AC 24 V or DC 12 V from an external power source.
- LED Cover
- OSD Setup Switch
- Service Video Connector
Use this jack for checking the picture with portable monitor when
install the camera.
9
Connections
Basic connection
The peripheral devices (DVR, monitor, etc.), AC/DC adapter and cables
are not supplied.
DUAL(DC12V/AC24V)
10
DC12V/AC24V
BNC FEMALE
DC12V /AC24V POWER SUPPLY
VIDEO IN
DC12V
DC12V
BNC FEMALE
DC12V POWER SUPPLY
VIDEO IN
Installation
Installing the camera on a ceiling or wall
. Ax the mounting template(supplied) to the mounting surface.
. Secure the camera mounting bracket to the position where the
camera should be mounted with the supplied screws.
Template
Tapping Type ø4x20mmx3ea
(Supplied)
Tapping Type
ø2x7mmx1ea
(Supplied)
11
Loading...