Page 1
User Manual
Model Name : IL7SB
Page 2
(2) Specifications
*Product
Item Categories
Specifications
Specification
Product Name Silverbox RADIO ASM-RECEIVER
Model IL7SB
Dimensions Refer to image
Weight
Monitor : 0.63kg
Keypad : 0.13kg
Silver box : 0.79kg(Base)
0.83kg(XM / DAB)
Power source DC 12V
Operational
temperature range
-30 ℃ ~ 85 ℃
1. Overview and Specifications
(1) Overview
1) The Infotainment system provides Infotainment in your car, using the latest
technology. See your dealer to have the system or software updated and upgraded.
2) The radio can be easily used by registering up to 25 FM or AM with the PRESET
button[1 to 5] per every 5 pages.
3) The Infotainment system can play the USB storage device or iPod/iPhone products.
4) The Bluetooth phone connection function allows for the use of wireless hands-free
Phone calls, as well as a phone music player.
In addition, the WiFi function is provided.
5) Connect a portable music player to the auxiliary sound input to enjoy the rich
sound of the Infotainment system.
Page 3
Monitor
183.1mm
115.9mm
26.62mm
28.72mm
Keypad
170.2mm
33.78mm
Page 4
*RF specifications
[ BT ]
Item Specifications Unit
Frequency 2402 ~ 2480 MHz
Modulation Type GFSK, π/4 DQPSK, 8 DPSK
BT Power 4 (BT class 2) dBm
Data rate 1 ~ 3 Mbps
Channel spacing 1 MHz
BT version BT4.2 + EDR MHz
[ Wi-Fi ]
Item Specifications Unit
Standard IEEE 802.11 a/b/g/n/ac
Frequency
2.4G 2412 ~ 2462 MHz
5G 5180 ~ 5825 MHz
Bandwidth 20 / 40 / 80 MHz
Data rate
2.4G
802.11 b 20M 1, 2, 5.5, 11 Mbps
802.11 g
20M
6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11 n
20M
6.5, 13, 19.5, 26, 39, 52, 58.5, 65 Mbps
5G
802.11 a
20M
6,9,12,18,24,36,48,54 Mbps
802.11 n
20M
6.5, 13, 19.5, 26, 39, 52, 58.5, 65 Mbps
802.11 n
40M
13.5, 27, 40.5, 54, 81, 108, 121.5, 135 Mbps
802.11 ac
20M
6.5, 13, 19.5, 26, 39, 52, 58.5, 65, 78 Mbps
802.11 ac
40M
13.5, 27, 40.5, 54, 81, 108, 121.5, 135
162, 180
Mbps
802.11 ac
80M
29.3, 58.5, 87.8, 117, 175.5, 234
263.3, 292.5, 351, 390
Mbps
Modulation
DSSS, BPSK,
16-QAM, 64-QAM, 256-QAM
Mode
AP, Station, AP and station
coexistence
Page 5
2. Component
Page 6
3. Operation
(1)
(2) (3) (4)(5) (6) (7)
Item (#No.) Descriptions
(1) Display Display for Play/Reception/Menu state and information.
(2) HOME button Press this button to enter the home menu.
(3)/(6) Seek button Press this button to seek the station or media contents.
(4) POWER button
Press and hold this button to turn the power on/off.
Press this button to turn the mute function on/off.
(5) Volume knob Rotate the Volume knob to adjust the volume.
(7) Phone button
Press this button to access the Phone screen.
(If there is no connected phone, it will be displayed
Bluetooth device management screen.)
Page 7
*Tap *Press & Hold
*Fling/Swipe
*Pinch & Spread
(8) Interactions | Rotary Knob
(9) Touch Gestures
*Rotate
Users can rotate the Volume
knob on the faceplate.
*Push
Users can press on the center of
the rotary-push knob to mute volume.
Page 8
4. Precautions
1) Always operate the vehicle in a safe manner. Do not become distracted by
the vehicle while driving and always be fully aware of all driving conditions.
Do not change settings or any functions. Pull over in a safe and legal
manner before attempting such operations. To promote safety, certain
functions are disabled unless the parking brake is on.
2) To reduce the risk of electric shock, do not remove the cover or back of
this product. There are no user-serviceable parts inside. Refer servicing to
qualified service personnel.
3) To reduce the risk of fire or electric shock, do not expose this product to
dripping or splashing water, rain, or moisture.
4) When driving your vehicle, be sure to keep the volume of the unit low
enough to allow you to hear sounds coming from the outside.
5) Do not drop it and avoid heavy impacts at anytime.
6) The driver should not watch the monitor while driving. If the driver
watches the monitor while driving, it may lead to carelessness and cause an
accident.
Page 9
5. FCC Warning
FCC Part 15.19 Statements:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Part 15.105 statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Part 15.21 statement
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
RF Exposure Statement (MPE)
The antenna(s) must be installed such that a minimum separation distance of
at least 20 cm is maintained between the radiator (antenna) and all persons
at all times. This device must not be co-located or operating in conjunction
with any other antenna or transmitter.
Page 10
6. IC Warning
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
This radio transmitter [2703H-IL7SB] has been approved by Innovation,
Science and Economic Development Canada to operate with the antenna
types listed below, with the maximum permissible gain indicated. Antenna
types not included in this list that have a gain greater than the maximum
gain indicated for any type listed are strictly prohibited for use with this
device.]
Le présent émetteur radio [2703H-IL7SB] a été approuvé par Innovation,
Sciences et Développement économique Canada pour fonctionner avec les
types d'antenne énumérés ci-dessous et ayant un gain admissible maximal.
Les types d'antenne non inclus dans cette liste, et dont le gain est supérieur
au gain maximal indiqué pour tout type figurant sur la liste, sont strictement
interdits pour l'exploitation de l'émetteur.
RF Exposure
The antenna (or antennas) must be installed so as to maintain at all times a
distance minimum of at least 20 cm between the radiation source (antenna)
and any individual. This device may not be installed or used in conjunction
with any other antenna or transmitter.
l'exposition aux RF
L’antenne (ou les antennes) doit être installée de façon à maintenir à tout
instant une distance minimum de au moins 20 cm entre la source de
radiation (l’antenne) et toute personne physique.
Loading...