LG I17S User Manual

Car AVN

User Manual

Model Name : I17S

(2) Specifications
*Product

Item Categories

Specifications

Specification

Product Name GM AVN CADILLAC

Model I17S

Dimensions Refer to image

Weight 1.16kg

Power source DC 12V

Operational

temperature range

-40 ℃ ~ 85 ℃

1. Overview and Specifications

(1) Overview

1) The Infotainment system provides Infotainment in your car, using the latest
technology. See your dealer to have the system or software updated and upgraded.

2) The Infotainment system can play the USB storage device or iPod/iPhone products.

3) The Bluetooth phone connection function allows for the use of wireless hands-free
Phone calls, as well as a phone music player.
In addition, the WiFi function is provided.

< Basic Design Concept >

180mm

60mm

<Front View>

172.5mm

46.7mm

<Right View>

<Top View>

* Silver Box

1) Silver box : 180mm x 172.5mm x 60mm ( Weight : 1.16kg)

*RF specifications

[ BT ]

[ Wi-Fi ]

Item Specifications Unit

Standard IEEE 802.11 a/b/g/n/ac

Frequency

2.4G 2412-2462 MHz
5G 5180 ~ 5825 MHz

Bandwidth 20 / 40 / 80 MHz

Data rate

2.4G

802.11 b 20M 1, 2, 5.5, 11 Mbps

802.11 g

20M

6, 9, 12, 18, 24, 36, 48, 54 Mbps

802.11 n

20M

6.5, 13, 19.5, 26, 39, 52, 58.5, 65 Mbps

5G

802.11 a

20M

6,9,12,18,24,36,48,54 Mbps

802.11 n

20M

6.5, 13, 19.5, 26, 39, 52, 58.5, 65 Mbps

802.11 n

40M

13.5, 27, 40.5, 54, 81, 108, 121.5, 135 Mbps

802.11 ac

20M

6.5, 13, 19.5, 26, 39, 52, 58.5, 65, 78 Mbps

802.11 ac

40M

13.5, 27, 40.5, 54, 81, 108, 121.5, 135
162, 180

Mbps

802.11 ac

80M

29.3, 58.5, 87.8, 117, 175.5, 234

263.3, 292.5, 351, 390

Mbps

Modulation

DSSS, BPSK,

16-QAM, 64-QAM, 256-QAM

Mode

AP, Station, AP and station

coexistence

Item Specifications Unit

Frequency 2402-2480 MHz

Modulation Type GFSK, π/4 DQPSK, 8 DPSK

BT Power 4 (BT Class2) dBm

Data rate 1 ~ 3 Mbps

Channel spacing 1 MHz

BT version

BT4.2 + EDR

(BT LE was disabled by software)

MHz

2. Component

No. Part Material

1 Top case ADC12
2 Bottom Case ADC12

3 Antenna Cover PC+ABS

4

Shield Can Top
inner

NSP C7701 t=0.2

5

Shield Can Top
outer

NSP C7701 t=0.2

6

Shield Can
Bottom inner

NSP C7701 t=0.2

7

Shield Can
Bottom outer

NSP C7701 t=0.2

8 PCB PCB ( Epoxy , T=1.6 )

9 etc. Screws, Clip, Sheets

Material

M3.5 x 8.0mm, Machine Screw,
5ea

Top Case

Bottom

Case

Antenna Cover

Shield Can

PCB

Touch

Gestures

Steering Wheel Controls

(Right-hand set)

Multifunction Controller

Touch Gestures

3. Operation

1. Volume / Power Knob

2. Audio Switch

3. Phone Switch

4. Navigation Switch

5. Vehicle Information Switch

6. Back Switch

7. Home Switch

8. Rotary Knob

Major controls of Info3.5C

1. SWC Control Area

• Right side of IPC display

• Head Up Display

2. MFC Control Area

• Entire ICS display

3. Touch Control Area

• Left side of IPC display

• Entire ICS display

MFC

Symbol Gesture Description

Press

Long press

Tilt right

Tilt left

Tilt up

Tilt down

Rotate clockwise

Rotate

counterclockwise

Press dial shortly then release

Press dial and hold for some period of time.

Push dial to right

Push dial to left

Push dial up

Push dial down

Dialing clockwise

Dialing counterclockwise

TOUCH GESTURE

Symbol Gesture Description

Tap (Press)

Double tap

Long tap

/ Long press

(Press & Hold)

Flick (Flicking)

Drag & Drop

Pinch

Panning

You touch a part of the screen with your
finger and then take the finger off from the
screen

A Double Touch gesture consists two

Touches in quick succession.

A Long Press is performed by touching the
screen and holding that touch location for
some period of time.

You touch 2 parts of the screen while you
move and then take the fingers off from
the screen (Factors: start point, end point)

You move from one point to the other

point quickly and then take the finger off
from the screen (Factor: direction)

You touch a part of the screen for 1 second
or more while you move and then take the
finger off from the screen

You bring your two fingers Cancel or slide
them apart on the screen (Factors: start
point, end point)

4. Precautions

1) Always operate the vehicle in a safe manner. Do not become distracted by
the vehicle while driving and always be fully aware of all driving conditions.
Do not change settings or any functions. Pull over in a safe and legal
manner before attempting such operations. To promote safety, certain
functions are disabled unless the parking brake is on.

2) To reduce the risk of electric shock, do not remove the cover or back of
this product. There are no user-serviceable parts inside. Refer servicing to
qualified service personnel.

3) To reduce the risk of fire or electric shock, do not expose this product to
dripping or splashing water, rain, or moisture.

4) When driving your vehicle, be sure to keep the volume of the unit low
enough to allow you to hear sounds coming from the outside.

5) Do not drop it and avoid heavy impacts at anytime.

6) The driver should not watch the monitor while driving. If the driver
watches the monitor while driving, it may lead to carelessness and cause an

accident.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.

Responsible Party

LG Electronics USA
1000 Sylvan Avenue Englewood Cliffs
New Jersey United States 07632 (Phone: [phone])

RF Exposure
The antenna (or antennas) must be installed so as to maintain at all times a distance minimum of at

least 20 cm between the radiation source (antenna) and any individual. This device may not be

installed or used in conjunction with any other antenna or transmitter.

l'exposition aux RF
L’antenne (ou les antennes) doit être installée de façon à maintenir à tout instant une distance

minimum de au moins 20 cm entre la source de radiation (l’antenne) et toute personne physique.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired
operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorisée aux deux conditions suivantes :

(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage

est susceptible d’en compromettre le fonctionnement.