LG HR931M, HR939M, HR933M, HR935M, HR932M User Manual
OWNER’S MANUAL
Blu-ray Disc
™
/DVD Player
with built-in HDD & HD
Tuner
Please read this manual carefully before operating
your set and retain it for future reference.
FOR THE GUARANTEE TERMS & CONDITIONS, PLEASE REFER TO INNER PAGE OF BACK COVER.
HR931M / HR932M / HR933M / HR935M / HR939M
www.lg.com
Getting Started
2
Safety Information
1
Getting Started
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
enclosure that may be of sucient magnitude to
constitute a risk of electric shock to persons.
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This lightning ash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service centre.
Use of controls, adjustments or the performance of
procedures other than those specied herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not
try to open the enclosure.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specication page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
centre. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
Getting Started
3
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, re or the like.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, shall be placed on the
apparatus.
Disposal of your old appliance
1. When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by the
European Directive 2002/96/EC.
2. All electrical and electronic products
shall be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or the
local authorities.
3. The correct disposal of your old
appliance will help prevent potential
negative consequences for the
environment and human health.
4. For more detailed information about
disposal of your old appliance, please
contact your city office, waste disposal
service or the shop where you
purchased the product.
Disposal of waste batteries/accumulators
1. When this crossed-out wheeled bin
symbol is attached to batteries/accumulators of Your product it means they
are covered by European Directive
2006/66/EC.
2. This symbol may be combined with
chemical symbols for mercury(Hg),
cadmium(Cd) or lead(Pb) if the battery
Contains more that 0.0005% of mercury, 0.002% of cadmium or 0.004%
of lead.
3. All batteries/accumulators should
be disposed separately from the
municipal waste stream via designated
collection facilities appointed by the
government or the local authorities.
4. The correct disposal of Your old batteries/ accumulators will help to prevent
potential negative consequences for
the environment, animal and human
health.
5. For more detailed information about
disposal of Your old batteries/ accumulators, please contact Your city o
ce, waste disposal service or the shop
where You purchased the product.
For Wireless product European Union Notice
LG Electronics hereby declares that this/these
product(s) is/are in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC, 2004/108/EC, 2006/95/EC,
2009/125/EC and 2011/65/EU.
Please contact to the following address for
obtaining a copy of the DoC (Declaration of
Conformity).
Contact oce for compliance of this product :
LG Electronics Inc.
EU Representative, Krijgsman 1,
1186 DM Amstelveen, The Netherlands
yPlease note that this is NOT a Customer Service
contact point. For Customer Service Information,
see Warranty Card or contact the dealer that you
purchased this product.
Indoor use only.
RF Radiation Exposure Statement
This equipment should be installed and operated
with minimum distance 20cm between the radiator
and your body.
1
Getting Started
Getting Started
4
Getting Started
POWER: This unit operates on a mains supply
of 200-240V~, 50/60Hz.
WIRING: This unit is supplied with a BSI 1363
1
approved 13 amp mains plug, fused at 5 amp.
When replacing the fuse always use a 5 amp
BS 1362, BSI or ASTA approved type. Never use
this plug with the fuse cover omitted. To obtain
a replacement fuse cover contact your dealer.
If the type of plug supplied is not suitable for
the mains sockets in your home, then the plug
should be removed and a suitable type tted.
Please refer to the wiring instructions below:
WARNING: A mains plug removed from the
mains lead of this unit must be destroyed. A
mains plug with bared wires is hazardous if
inserted in a mains socket. Do not connect
either wire to the earth pin, marked with the
letter
or with the earth symbol or coloured
green or green and yellow.
If any other plug is tted, use a 5 amp fuse,
either in the plug, or at the distribution board.
IMPORTANT: The wires in this mains lead are
coloured in accordance with the following
codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the
colours of the wires in the mains lead of this
unit may not correspond with the coloured
marking identifying the terminals in your plug,
proceed as follows: The wire which is coloured
blue must be connected to the terminal which
is marked with the letter N or coloured black.
The wire which is coloured brown must be
connected to the terminal which is marked
with the letter L or coloured red.
Caution
>
yWatching a 3D content for a long period
time may cause dizziness or tiredness.
yIt is not recommended to watch a movie
in 3D mode for inrm, child and pregnant
woman.
yIf you are experiencing headache, tiredness
or dizziness while viewing content in 3D,
it is strongly recommended to stop the
playback and rest until you feel normal.
Notes on Copyrights
yRecording equipment should be used only for
lawful copying and you are advised to check
carefully what is lawful copying in the area
in which you are making a copy. Copying of
copyright material such as lms or music is
unlawful unless permitted by a legal exception
or consented to by the rights owner.
yThis product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorized by Rovi Corporation.
Reverse engineering or disassembly is prohibited.
yCONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 625 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION
TO THE ‘STANDARD DEFINITION’ OUTPUT. IF
THERE ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL 625p UNIT
PLEASE CONTACT OUR CUSTOMER SERVICE
CENTRE.
yBecause AACS (Advanced Access Content
System) is approved as content protection
system for BD format, similar to use of CSS
(Content Scramble System) for DVD format,
certain restrictions are imposed on playback,
analogue signal output, etc., of AACS protected
contents. The operation of this product and
restrictions on this product may vary depending
on your time of purchase as those restrictions
may be adopted and/or changed by AACS after
the production of this product.
yFurthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems
for BD format, which imposes certain restrictions
including playback restrictions for BD-ROM
Mark and/or BD+ protected contents. To obtain
additional information on AACS, BD-ROM
Mark, BD+, or this product, please contact an
authorized Customer Service Centre.
yMany BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only
connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected discs.
yUnder the U.S. Copyright laws and Copyright
laws of other countries, unauthorized
recording, use, display, distribution, or revision
of television programs, videotapes, BD-ROM
discs, DVDs, CDs and other materials may
subject you to civil and/or criminal liability.
Important Notice for TV colour
system
The colour system of this player diers according
to currently playing discs.
For example, when the player plays the disc
recorded in the NTSC colour system, the image is
output as an NTSC signal.
Only the multi system colour TV can receive all
signals output from the player.
yIf you have a PAL colour system TV, you will
see just distorted images when using discs or
video contents recorded in NTSC.
yThe multi system colour TV changes the
colour system automatically according to
input signals. In case that the colour system
is not changed automatically, turn it o and
then on to see normal images on screen.
yEven if the disc recorded in NTSC colour
system are well displayed on your TV, these
may not be recorded correctly on your
recorder.
Getting Started
5
1
Getting Started
Table of Contents
6
Table of Contents
1 Getting Started
2 Safety Information
8 Introduction
8 – Playable discs and symbols used in this
manual
9 – About the “7” symbol display
9 – Compatibility notes
10 – File compatibility
11 – Regional Code
11 – AVCHD (Advanced Video Codec High
Definition)
11 – System Requirements
11 – Compatibility Notes
11 – LG AV Remote
12 Remote control
13 Main Unit
2 Connecting
14 Connections to Your TV
14 – Antenna connection to your TV and this
unit
15 – HDMI Connection
16 – Resolution Setting
16 Connecting to an Amplifier
17 – Connecting to an Amplifier via HDMI
Output
17 – Connecting to an Amplifier via Digital
Audio Output
18 Connecting to your Home Network
18 – Wired network connection
19 – Wired Network Setup
20 – Wireless network connection
20 – Wireless Network Setup
23 USB device connection
23 – Playback content in the USB device
3 System Setting
24 Auto Set UP
25 Home Menu Overview
25 – Basic button operations
25 Settings
25 – Adjust the Setup Settings
26 – Settings for Digital TV
26 – Scanning programmes automatically
(Auto Tuning)
26 – Scanning programmes manually
(Manual Tuning)
27 – Editing Programme List (Channel Edit)
27 – Setting the DTV Lock
28 – Adjusting DTV Rating
28 – Setting the antenna power
28 – Setting the Timeshift
29 – [DTV] Menu
30 – [DISPLAY] Menu
31 – [LANGUAGE] Menu
32 – [AUDIO] Menu
33 – [LOCK] Menu
34 – [NETWORK] Menu
35 – [OTHERS] Menu
4 Operating
38 Using the Digital TV functions
38 – Viewing the Digital TV
38 – Changing Digital TV programmes
38 – Setting favourite programmes
39 – Viewing the programme information
39 – Selecting DTV audio language
39 – Selecting DTV subtitle language
39 – Programme Guide (Digital program
only)
40 – Using the MHEG (Viewing MHEG)
41 – Using the timeshift function manually
41 – Using the timeshift function
automatically
42 Recording TV programmes
42 – Normal Recording
42 – Dual Programme Recording
42 – Stop Recording
43 – Timer Recording (Manual)
43 – Timer Recording (EPG)
44 – Canceling a timer recording
44 – Editing a timer recording
44 – Instant Timer Recording
45 General Playback
45 – Playing Discs
46 – Using the disc menu
46 – Resume playback
46 – Playing the recorded titles
Table of Contents
7
46 – Searching the recorded titles
47 – Sorting the recorded titles
47 – Playing content contained in the internal
hard disk drive
48 – Searching content in the hard disk drive
by entering file name
48 – Playing Blu-ray 3D disc
49 Advanced Playback
49 – Repeat Playback
50 – Repeating a specific portion
50 – Changing content list view
51 – Viewing content information
51 – Selecting a subtitle file
51 – Last Scene Memory
52 On-Screen display
52 – Displaying content information on-
screen
53 – Playing from selected time
53 – Hearing different audio
53 – Selecting a subtitle language
54 – Watching from a different angle
54 – Changing the TV Aspect Ratio
54 – Changing the Picture Mode
55 Copying
55 – Copying file(s)/folder(s) to the internal
hard disk drive
56 – Copying file(s)/folder(s) from the
internal hard disk drive to a USB
storage device
58 – Deleting a file(s)/folder(s)
58 – Naming a file/folder
59 Enjoying BD-LIVE
59 – Playing a file on a network server
60 – Wi-Fi Direct™ Connection
62 Playing movie file and VR discs
63 – Selecting a subtitle file
63 – Changing subtitle code page
64 Viewing a photo
65 – Options while viewing a photo
65 – Listening to music during a slide show
66 Listening to music
67 – Audio CD Recording
68 – Viewing information from Gracenote
Media Database
69 – Using the Music Library
71 – Using the Photo Library
71 Using the Premium
72 Using the LG Apps
72 – Signing in
72 – Managing my Apps
73 – Searching online content
5 Troubleshooting
74 Troubleshooting
74 – General
74 – Picture
75 – Sound
75 – Network
76 – Recording
76 – Customer Support
76 – Open source software notice
6 Appendix
77 Controlling a TV with the Supplied Remote
Control
77 – Setting up the remote to control your
TV
78 Area Code List
79 Language code List
80 Trademarks and Licenses
82 Network Software Update
82 – Network update notification
83 – Software Update
84 MediaHome 4 Essentials
84 – System requirements
84 – Installing Nero MediaHome 4 Essentials
85 – Sharing files and folders
86 Audio Output Specifications
87 About the internal hard disk drive
88 Video Output Resolution
89 Specifications
90 Maintenance
90 – Notes on Discs
90 – Handling the Unit
91 Important Information Relating to Network
Services
1
2
3
4
5
6
Getting Started
8
Introduction
1
Playable discs and symbols used in this manual
Getting Started
Media/Term Logo Symbol Description
yDiscs such as movies that can be purchased or
rented.
y“Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs.
yBD-R/RE discs that are recorded in BDAV format.
yBD-R/RE discs that contain Video, Audio or
Photo les.
yISO 9660+JOLIET, UDF and UDF Bridge format
yDiscs such as movies that can be purchased or
rented.
yVideo mode and nalized only
ySupports the dual layer disc also
Finalized AVCHD format
yDVD±R/RW discs that contain Video, Audio or
Photo les.
yISO 9660+JOLIET, UDF and UDF Bridge format
VR mode and nalized only
Audio CD
yCD-R/RW discs that contain Video, Audio or
Photo les.
yISO 9660+JOLIET, UDF and UDF Bridge format
Movie, Music, Photo les contained in the HDD
Titles recorded via this unit
Blu-ray
DVD-ROM
DVD-R
DVD-RW
DVD+R
DVD+RW
(8 cm, 12 cm)
DVD-RW (VR)
(12 cm)
Audio CD
(12 cm)
CD-R/RW
(8 cm, 12 cm)
HDD –
e
y
u
i
r
o
y
u
i
r
t
y
u
i
y
u
i
REC
Note –
Caution –
,
>
Indicates special notes and operating features.
Indicates cautions for preventing possible damages
from abuse.
Note
,
yDepending on the conditions of the
recording equipment or the CD-R/RW (or
DVD-R/RW ) disc itself, some CD-R/RW (or
DVD
R/RW) discs cannot be played on the
±
unit.
yDepending on the recording software & the
nalization, some of recorded discs (CD-R/
RW or DVD
yBD-R/RE, DVD±R/RW and CD-R/RW discs
recorded using a personal computer or a
DVD or CD Recorder may not play if the
disc is damaged or dirty, or if there is dirt or
condensation on the player’s lens.
yIf you record a disc using a personal
computer, even if it is recorded in a
compatible format, there are cases in which
it may not play because of the settings of
the application software used to create the
disc. (Check with the software publisher for
more detailed information.)
yThis unit requires discs and recordings to
meet certain technical standards in order to
achieve optimal playback quality.
yPre-recorded DVDs are automatically set to
these standards. There are many dierent
types of recordable disc formats (including
CD-R containing MP3 or WMA les) and
these require certain pre-existing conditions
to ensure compatible playback.
yCustomers should note that permission
is required in order to download MP3 /
WMA les and music from the Internet.
Our company has no right to grant such
permission. Permission should always
be obtained from / guaranteed by the
copyright owner.
yYou have to set the disc format option
to [Mastered] in order to make the discs
compatible with the LG players when
formatting rewritable discs. If you set the
option to “Live System”, the disc cannot be
played on LG player. (Mastered/Live File
System : Disc format system for windows
Vista)
yThe drive is slot looking you should insert
only round 77 or 120 mm disc. The drive
does not work with irregularly shaped discs,
which could damage the drive if inserted.
R/RW) may not be playable.
±
Getting Started
About the “7” symbol display
“7” may appear on your TV display during
operation and indicates that the function explained
in this owner’s manual is not available on that
specic media.
Compatibility notes
yBecause BD-ROM is a new format, certain disc,
digital connection and other compatibility issues
are possible. If you experience compatibility
problems, please contact an authorized
Customer Service Center.
yThis unit allows you to enjoy functions such
as picture-in-picture, secondary audio and
Virtual packages, etc., with BD-ROM supporting
BONUSVIEW (BD-ROM version 2 Prole 1 version
1.1). Secondary video and audio can be played
from a disc compatible with the picture-inpicture function. For the playback method, refer
to the instructions in the disc.
yViewing high-denition content and up-
converting standard DVD content may require a
HDMI-capable input or HDCP-capable DVI input
on your display device.
ySome BD-ROM and DVD discs may restrict the
use of some operation commands or features.
yDolby TrueHD, Dolby Digital Plus and DTS-HD are
supported with maximum 7.1 channels if you
use HDMI connection for the audio output of the
unit.
yYou can use a USB device to store some disc
related information, including downloaded
online content. The disc you are using will
control how long this information is retained.
9
1
Getting Started
Getting Started
10
File compatibility
Overall
Available File extensions: “.jpg”, “.jpeg”, “.png”, “.avi”,
1
“.divx”, “.mpg”, “.mpeg”, “.mkv”, “.mp4”, “.mp3”, “.wav”
Getting Started
“.wma”, “.ts”
yThere could be a variance on the available le
extensions depending on DLNA server.
yThe le name is limited to 180 characters.
yDepending on the size and number of the les,
it may take several minutes to read the contents
on the media.
Maximum Files/Folder: Less than 2000 (total
number of les and folders)
CD-R/RW, DVD±R/RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF and UDF Bridge format
MOVIE
Available resolution: 1920 x 1080 (W x H) pixels
Playable subtitle: SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt),
VobSub (.sub), SubViewer 1.0 (.sub), SubViewer 2.0
(.sub/.txt), DVD Subtitle System (.txt), TMPlayer (.txt)
Playable Codec format: “DIVX 3.11”, “DIVX4”,
“DIVX5”, “DIVX6”,
“XVID” (Standard playback only), H.264/MPEG-4 AVC,
DIVX-HD, MPEG1 SS, MPEG2 PS, MPEG2 TS
Playable Audio format: “Dolby Digital”, “DTS”,
“MP3”, “WMA”, “AAC”, “AC3”
yNot all the WMA and AAC Audio formats are
compatible with this unit.
Sampling frequency: within 32-48 kHz (WMA),
within 16-48 kHz (MP3)
Bit rate: within 20-320 kbps (WMA), within 32-320
kbps (MP3)
Note
,
yHD movie les contained on the CD or USB
1.0/1.1 may not be played properly. BD, DVD
or USB 2.0 are recommended to play back
HD movie les.
yThis player supports H.264/MPEG-4 AVC
prole Main, High at Level 4.1. For a le
with higher level, there will be an warning
message on the screen.
yThis player does not support the le that
are recorded with GMC
are video encoding techniques in MPEG4
standard, like DivX or XVID.
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
yHD movie les that need high performance
playback could react slowly.
yThe total playback time indicated on the
screen may not be correct for .ts les.
1
or Qpel
*
2
. Those
*
MUSIC
Sampling frequency: between 8 - 48 kHz (WMA),
within 11 - 48 kHz (MP3),
44.1 and 48 kHz (LPCM)
Bit rate: between 8 - 320 kbps (WMA, MP3), 768
kbps and 1.536 Mbps (LPCM)
Note
,
yThis unit cannot support the ID3 Tag
embedded MP3 le.
yThe total playback time indicated on the
screen may not be correct for VBR les.
PHOTO
Recommended size:
Less than 4,000 x 3,000 x 24 bit/pixel
Less than 3,000 x 3,000 x 32 bit/pixel
yProgressive and lossless compression photo
image les are not supported.
yDepending on the size and number of the photo
les, it may take several minutes to read the
contents of the media.
yThis player can not display thumbnail image in
some les.
Getting Started
11
Regional Code
This unit has a regional code printed on the rear of
the unit. This unit can play only BD-ROM or DVD
discs labelled same as the rear of the unit or “ALL”.
AVCHD (Advanced Video Codec High Definition)
yThis player can playback AVCHD format discs.
These discs are normally recorded and used in
camcorders.
yThe AVCHD format is a high denition digital
video camera format.
yThe MPEG-4 AVC/H.264 format is capable of
compressing images at higher eciency than
the conventional image compressing format.
ySome AVCHD discs use the “x.v.Color” format.
yThis player can playback AVCHD discs using
“x.v.Color” format.
ySome AVCHD format discs may not be played,
depending on the recording condition.
yAVCHD format discs need to be nalized.
y“x.v.Color” oers a wider colour range than
normal DVD camcorder discs.
System Requirements
For high denition video playback:
yHigh denition display that has COMPONENT or
HDMI input jacks.
yBD-ROM disc with high denition content.
yHDMI or HDCP capable DVI input on your display
device is required for some content (as specied
by disc authors).
yFor up-conversion of standard denition DVD, a
HDMI or HDCP capable DVI input on your display
device is required for copy-protected content.
For Dolby® Digital Plus, Dolby TrueHD and DTS-HD
multi-channel audio playback:
yAn amplier/receiver with a built-in (Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS or
DTS-HD) decoder.
yMain, centre, surround speakers and subwoofer
as necessary for chosen format.
Compatibility Notes
yBecause BD-ROM is a new format, the can be
issues regarding certain disc, digital connection
and other compatibility issues. If you experience
compatibility problems, please contact an
authorized Customer Service Center.
yViewing high-denition content and up-
converting standard DVD content may require a
HDMI-capable input or HDCP-capable DVI input
on your display device.
ySome BD-ROM and DVD discs may restrict the
use of some operation commands or features.
yDolby TrueHD, Dolby Digital Plus and DTS-HD are
supported with maximum 7.1 channels if you
use HDMI connection as the audio output.
yYou can use a USB device that is used to store
some disc related information, including
downloaded on-line content. The disc you are
using will control how long this information is
retained.
yWhile watching 3D contents, on-screen displayed
may not be displayed properly. To display proper
on-screen display, turn o 3D mode on TV.
LG AV Remote
You can control this player with your iPhone or
Android phone via your home network.
This player and your phone must be connected to
your wireless network device such as access point.
Visit “Apple iTunes” or “Google Android Market
(Google Play Store)” for detailed information of “LG
AV Remote”.
1
Getting Started
Getting Started
12
Remote control
1
Getting Started
Battery Installation
Remove the battery cover on
the rear of the Remote Control,
and insert two R03 (size AAA)
batteries with 4 and 5 matched
correctly.
• • • • • • a • • • • • •
(POWER): Switches the player
1
ON or OFF.
(OPEN/CLOSE): Opens and
B
closes the disc tray.
MUTE (@): Mutes the sound.
EXIT: Exits a menu or hides on-
screen information.
SUBTITLE: Selects a subtitle
language.
TEXT: Switches between
teletext mode and normal TV
viewing.
0-9 numerical buttons: Selects
numbered options in a menu.
CLEAR: Removes a mark on the
search menu or a number when
setting the password.
REPEAT (h): Repeats a
desired section or sequence.
TV/RADIO: Switches between
TV and radio modes.
• • • • • • b • • • • •
c/v
backward or forward.
C/V
next or previous chapter / track /
le.
Z
d
M
(SCAN): Searches
(SKIP): Goes to the
(STOP): Stops playback.
(PLAY): Starts playback.
(PAUSE): Pauses playback.
TIME SHIFT: Activates pause
live TV/playback (timeshift) for
a live TV programme.
• • • • • • c • • • • •
VOL (-/+): Adjusts the sound
level of the unit.
REC. (X): Starts recording.
CH LIST: Displays the Channel
list.
TIMER REC.: Displays [Timer
Recording] menu.
CH (-/+): Scans up or
down through memorized
programmes.
HOME (n): Displays or exits the
[Home Menu].
GUIDE: Displays the EPG menu.
MUSIC ID: When connected
to the network, can provide
information about the current
song while video playback.
INFO/MENU (m): Displays or
exits On-Screen Display.
Direction buttons: Selects an
option in the menu.
ENTER (b): Acknowledges
menu selection.
BACK (1): Exits the menu or
returns to the previous screen.
TITLE/POP UP: Displays the DVD
title menu or BD-ROM’s pop-up
menu, if available.
DISC MENU/REC.LIST:
Accesses menu on a disc or
switches between recording
list menu.
• • • • • • d • • • • •
Coloured (R, G, Y, B) buttons:
Use to navigate BD-ROM menus.
They are also used for [MOVIE],
[PHOTO], [MUSIC], [Premium], [LG
Apps] and [DTV] menu.
TV Control Buttons: See page
77
Main Unit
Getting Started
13
1
Getting Started
Disc Tray
a
Display window
b
Remote Sensor
c
(Open/Close)
d R
(Play/Pause)
e T
ANTENNA IN
a
USB Port
b
If you want to record on external HDD, connect
external HDD to unit.
LAN port
c
HDMI OUT (TO TV)
d
(Stop)
f I
/I (Power)
g 1
USB Port
h
This port is not for recording with USB HDD.
To record the TV program, use the USB port on
the rear panel of the unit.
OPTICAL (DIGITAL AUDIO OUT)
e
AC IN connector
f
Connect the supplied power cord.
ANTENNA OUT (TO TV)
g
14
TV
Connecting
Connections to Your TV
Make one of the following connections, depending
on the capabilities of your existing equipment.
yAntenna connection (page 14)
yHDMI connection (page 15)
2
Connecting
Note
,
yDepending on your TV and other equipment
you wish to connect, there are various ways
you could connect the unit. Use only one of
the connections described in this manual.
yPlease refer to the manuals of your TV,
Stereo System or other devices as necessary
to make the best connections.
yMake sure the player is connected directly
to the TV. Tune the TV to the correct video
input channel.
yDo not connect the player’s AUDIO OUT jack
to the phono in jack (record player) of your
audio system.
yDo not connect your player via your VCR.
The image could be distorted by the copy
protection system.
Antenna connection to your TV and this unit
Connect one end of the RF cable to ANTENNA
OUT(TO TV) jack on the unit and other end to
ANTENNA IN jack on your TV. Passes the signal from
the ANTENNA IN jack to your TV/monitor.
Connect the Terrestrial TV antenna to the ANTENNA
IN jack on the unit. If you want to use an indoor
antenna, use one with a signal amplier rated at 5V,
100mA and set [Antenna 5V] to [ON] in the setup
menu (See page 28).
ANTENNA
Rear of this unit
RF Cable
TV
HDMI Connection
If you have a HDMI TV or monitor, you can connect
it to this unit using a HDMI cable (Type A, High
Speed HDMI™ Cable). Connect the HDMI jack on
the unit to the HDMI jack on a HDMI compatible TV
or monitor.
Rear of this unit
HDMI Cable
TV
TV
Connecting
Note
,
yIf a connected HDMI device does not accept
the audio output of the unit, the HDMI
device’s audio sound may be distorted or
may not output.
yWhen you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution Setting” on page 16.)
ySelect the type of video output from the
HDMI OUT jack using [HDMI Color Setting]
option on the [Setup] menu (see page 31).
yChanging the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn o the player and then turn it
on again.
yWhen the HDMI connection with HDCP is
not veried, TV screen is changed to black
screen. In this case, check the the HDMI
connection, or disconnect the HDMI cable.
yIf there is noise or lines on the screen, please
check the HDMI cable (length is generally
limited to 4.5m).
Additional Information for HDMI
15
2
Connecting
Set the TV’s source to HDMI (refer to TV’s Owner’s
manual).
yWhen you connect a HDMI or DVI compatible
device make sure of the following:
yTry switching o the HDMI/DVI device and
this player. Next, switch on the HDMI/DVI
device and leave it for around 30 seconds,
then switch on this player.
yThe connected device’s video input is set
correctly for this unit.
yThe connected device is compatible with
720x576p, 1280x720p, 1920x1080i or
1920x1080p video input.
yNot all HDCP-compatible HDMI or DVI devices
will work with this player.
yThe picture will not be displayed properly
with non-HDCP device.
yThis player does not playback and TV screen
is changed to black screen.
16
Connecting
Resolution Setting
The player provides several output resolutions for
HDMI OUT and COMPONENT VIDEO OUT jacks. You
can change the resolution using [Setup] menu.
1. Press HOME (n).
2. Use
(b). The [Setup] menu appears.
2
Connecting
3. Use
press D to move to the second level.
4. Use
then press ENTER (b) to move to the third level.
to select the [Setup] and press ENTER
A/D
to select [DISPLAY] option then
W/S
to select the [Resolution] option
A/D
Connecting to an Amplifier
Make one of the following connections, depending
on the capabilities of your existing equipment.
yHDMI Audio connection (page 17)
yDigital Audio connection (page 17)
Since many factors aect the type of audio output,
see “Audio Output Specications” for details (pages
86-87).
About Digital Multi-channel sound
A digital multi-channel connection provides the
best sound quality. For this, you need a multichannel Audio/Video Receiver that supports one or
more of the audio formats supported by your unit.
Check the receiver manual and the logos on the
front of the receiver. (PCM Stereo, PCM Multi-Ch,
Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS
and/or DTS-HD)
5. Use
press ENTER (b) to confirm your selection.
to select the desired resolution then
W/S
Connecting
17
Connecting to an Amplifier via HDMI Output
Connect the player’s HDMI OUT jack to the
corresponding in jack on your amplier using a
HDMI cable. You will need to activate the player’s
digital output. (See “[AUDIO] Menu” on pages 32-
33.)
Rear of this unit
HDMI Cable
Amplier/Receiver
Amplier/Receiver
HDMI
Cable
Connecting to an Amplifier via Digital Audio Output
Connect the player’s OPTICAL (DIGITAL AUDIO OUT)
jack to the corresponding in jack (OPTICAL) on your
amplier.
Use an optional digital (optical) audio cable. You
will need to activate the unit’s digital output. (See
“[AUDIO] Menu” on pages 32-33.)
2
Connecting
Rear of this unit
Optical Cable
OPTICAL
TV
TV
Connect the amplier’s HDMI output jack to HDMI
input jack on your TV using a HDMI cable if your
amplier has HDMI output jack.
Amplier/Receiver
Amplier/Receiver
Connecting
18
Connecting to your Home Network
This unit can be connected to a local area network
(LAN) via the LAN port on the rear panel or the
internal wireless module.
By connecting the unit to a broadband home
network, you have access to services such as
2
software updates, BD-Live interactivity and
Connecting
streaming services.
Wired network connection
Using a wired network provides the best
performance, because the attached devices
connect directly to the network and are not subject
to radio frequency interference.
Please refer to the documentation for your network
device for further instructions.
Connect the player’s LAN port to the corresponding
port on your Modem or Router using a
commercially available LAN or Ethernet cable.
Note
,
yWhen plugging or unplugging the LAN
cable, hold the plug portion of the cable.
When unplugging, do not pull on the LAN
cable but unplug while pressing down on
the lock.
yDo not connect a modular phone cable to
the LAN port.
ySince there are various connection
congurations, please follow the
specications of your telecommunication
carrier or internet service provider.
yIf you want to access content from PCs or
DLNA servers, this unit must be connected
to the same local area network with them
via a router.
Broadband
service
Router
PC and/or DLNA
certied server
Rear of the unit
Wired Network Setup
If there is a DHCP server on the local area network
(LAN) via wired connection, this player will
automatically be allocated an IP address. After
making the physical connection, a small number of
home networks may require the player’s network
setting to be adjusted. Adjust the [NETWORK]
setting as follow.
Connecting
Note
,
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using
and numerical buttons. If you make a
A/D
mistake while entering a number, press CLEAR
to clear the highlighted part.
W/S/
19
Preparation
Before setting the wired network, you need to
connect the broadband internet to your home
network.
1. Select [Connection Setting] option in the
[Setup] menu then press ENTER (b).
2. The [Connection Setting] menu will appear on
the screen. Use
press ENTER (b).
3. Select [Yes] and press ENTER (b) to continue.
The new connection settings reset the current
network settings.
4. Use
W/S/A/D
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
to select the [Wired] and
W/S
to select the IP mode
4. Select [OK] and press ENTER (b) to apply
network settings.
5. The player will ask you to test the network
connection. Select [OK] and press ENTER
(b) to complete the network connection.
6. If you select [Test] and press ENTER
(b) at step 5 above, the network connection
status is displayed on the screen.
You can also test it on the [Connection Status]
in the [Setup] menu.
2
Connecting
20
Connecting
Wireless network connection
Another connection option is to use an Access Point
or a wireless router. The network conguration and
connection method may vary depending on the
equipment in use and the network environment.
2
Connecting
Wireless
Communication
DLNA certied servers
Access Point or
Wireless Router
Broadband
service
Refer to the setup instructions supplied with
your access point or wireless router for detailed
connection steps and network settings.
For best performance, a direct wired connection
from this player to your home network’s router or
cable/DSL modem is always the best option.
If you do chose to use the wireless option, note that
performance can sometimes be aected by other
electronic devices in the home.
Wireless Network Setup
For the wireless network connection, the player
needs to be set up for network communication.
This adjustment can be done from the [Setup]
menu. Adjust the [NETWORK] setting as follows.
Setting up the access point or the wireless router
is required before connecting the player to the
network.
Preparation
Before setting the wireless network, you need to:
y connect the broadband internet to the wireless
home network.
y set the access point or wireless router.
y note the SSID and security code of the network.
1. Select [Connection Setting] option in the
[Setup] menu then press ENTER (b).
2. The [Connection Setting] menu appears on the
screen. Use
ENTER (b).
3. Select [Yes] and press ENTER (b) to continue.
The new connection settings reset the current
network settings.
to select [Wireless] and press
W/S
Connecting
21
4. The player scans all available access points or
wireless routers within range and displays them
as a list. Use
wireless router on the list, and then press ENTER
(b).
If you have security on your access point or
wireless router, verify that the WEP or WPA key
that was entered into the player matches the
router’s information exactly. You need to input the
security code as necessary.
Note
,
yWEP security mode generally have 4 keys
available on an access point or wireless
router’s setting. If your access point or
wireless router uses WEP security, enter the
security code of the key “No.1” to connect on
your home network.
yAn Access Point is a device that allows you
to connect to your home network wirelessly.
to select an access point or
W/S
Note
,
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using
and numerical buttons. If you make a
A/D
mistake while entering a number, press CLEAR
to clear the highlighted part.
6. Select [OK] and press ENTER (b) to apply
network settings.
7. The player will ask you to test the network
connection. Select [OK] and press ENTER
(b) to complete the network connection.
8. If you select [Test] and press ENTER (b)
at step 7 above, the network connection status
is displayed on the screen.
You can also test it on the [Connection Status]
in the [Setup] menu.
W/S/
2
Connecting
[Manual] – Your access point may not be
broadcasting its access point name (SSID). Check
your router settings through your computer
and either set your router to broadcast SSID, or
manually enter the access point name (SSID) in
[Manual].
[Push Button] – If your access point or wireless
router supports the Push Button Configuration
method, select this option and press the Push
Button on your access point or wireless router
within 120 counts. You do not need to know the
access point name (SSID) and security code of
your access point or wireless router.
5. Use
W/S/A/D
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
to select the IP mode
22
Connecting
Notes on Network Connection:
yMany network connection problems during
set up can often be xed by re-setting the
router or modem. After connecting the player
to the home network, quickly power o and/
or disconnect the power cable of the home
network router or cable modem. Then power on
and/or connect the power cable again.
yDepending on the internet service provider (ISP),
2
Connecting
the number of devices that can receive internet
service may be limited by the applicable terms
of service. For details, contact your ISP.
yOur company is not responsible for any
malfunction of the player and/or the internet
connection feature due to communication
errors/malfunctions associated with your
broadband internet connection, or other
connected equipment.
yThe features of BD-ROM discs made available
through the Internet Connection feature are not
created or provided by our company, and our
company is not responsible for their functionality
or continued availability. Some disc related
material available by the Internet Connection
may not be compatible with this player. If you
have questions about such content, please
contact the producer of the disc.
ySome internet content may require a higher
bandwidth connection.
yEven if the player is properly connect and
congured, some internet content may not
operate properly because of internet congestion,
the quality or bandwidth of your internet service,
or problems at the provider of the content.
ySome internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
broadband Internet connection.
yAny fees charged by an ISP including, without
limitation, connection charges are your
responsibility.
yA 10 Base-T or 100 Base-TX LAN port is required
for wired connection to this player. If your
internet service does not allow for such a
connection, you will not be able to connect the
player.
yYou must use a Router to use xDSL service.
yA DSL modem is required to use DSL service and
a cable modem is required to use cable modem
service. Depending on the access method of and
subscriber agreement with your ISP, you may not
be able to use the internet connection feature
contained in this player or you may be limited
to the number of devices you can connect at
the same time. (If your ISP limits subscription to
one device, this player may not be allowed to
connect when a PC is already connected.)
yThe use of a “Router” may not be allowed or its
usage may be limited depending on the policies
and restrictions of your ISP. For details, contact
your ISP directly.
yThe wireless network operate at 2.4GHz
radio frequencies that are also used by other
household devices such as cordless telephone,
Bluetooth® devices, microwave oven, and can be
aected by interference from them.
yTurn o all unused network equipment in
your local home network. Some devices may
generate network trac.
yFor the purpose of the better reception place the
player as close as possible to the access point.
yIn some instances, placing the access point or
wireless router at least 0.45 m above the oor
may improve the reception.
yMove closer to the access point if possible or re-
orient the player so there is nothing between it
and the access point.
yThe reception quality over wireless depends on
many factors such as type of the access point,
distance between the player and access point,
and the location of the player.
ySet your access point or wireless router to
Infrastructure mode. Ad-hoc mode is not
supported.
USB device connection
This unit can play movie, music and photo les
contained on a USB device.
Playback content in the USB device
1. Insert a USB device into the USB port until it fits
into place.
Rear of this unitFront of the unit
or
External HDD
2. Press HOME (n).
3. Select [Movie], [Photo] or [Music] using
and press ENTER (b).
4. Select the [USB] option using
ENTER (b).
5. Select a file using
(PLAY) or ENTER (b) to play the file.
W/S/A/D
W/S
A/D
, and press
, and press
d
Connecting
Note
,
yThis unit supports USB ash memory/
external HDD formatted in FAT16, FAT32 and
NTFS when accessing les (music, photo,
movie). However, for BD-Live, only FAT16
and FAT32 formats are supported. The USB
device can be used for local storage for
enjoying BD-Live discs from the Internet.
yPlease use the Internal HDD or USB ash
memory/external HDD formatted in either
FAT16 or FAT32 when using BD-Live.
yThis unit can support up to 4 partitions of
the USB device.
yDo not extract the USB device during
operation (play, recording, etc.).
yA USB device which requires additional
programme installation when you
have connected it to a computer, is not
supported.
yUSB device: USB device that supports
USB1.1 and USB2.0.
,
yMovie, Music and photo les can be played.
For details of operations on each le, refer to
relevant pages.
yRegular back up is recommended to
prevent data loss.
yIf you use a USB extension cable or USB HUB
or USB multi card reader, the USB device
may not be recognized.
ySome USB device may not work with this
unit.
yDigital camera and mobile phone are not
supported.
yThe USB Port on this unit cannot be
connected to a PC. The unit cannot be used
as a storage device.
yUnformatted media cannot be used. Please
format before using.
yIf USB HDD cannot be recognized, try
another dierent USB cable.
ySome USB cables may not supply enough
current for normal USB operation.
yFiles over 4GB are supported with NTFS
format.
23
2
Connecting
6. Withdraw the USB device carefully after exiting
the USB mode.
System Setting
24
Auto Set UP
You can reset the recorder to all its factory settings.
Some options cannot be reset (Rating and
Password). The [Auto Setup] menu appears on the
screen after the factory settings.
Step 1. Language Setting
1. Use
W/S/A/D
on-screen display, and press ENTER (b).
3
System Setting
Step 2. Channel Setting
1. Use
W/S/A/D
press ENTER (b).
2. While the Start option is selected, and press
ENTER (b) to begin the channel search.
If you want to search channels in numerical
order, uncheck the box [Automatic Numbering]
by using ENTER (b)
.
The recorder automatically searches for and
saves the programmes.
If you select [Stop], the [Channel Setting]
function will be skipped.
3. Press ENTER (b).
to select a language for the
to select a country, and
Step 3. Time Setting
1. Use
or [Auto], and press ENTER (b).
Auto: Set the programme that broadcasts
a clock signal and the clock will be set
automatically.
If the time that has automatically set is not
correct comparing your local time, you can set
additional time option.
Manual: If there is no channel that broadcasts
a clock signal in your area, you can set the time
and date manyally. Use
field, and input correct time and date using
D
2. Press ENTER (b) to complete the time setting.
to select an option among [Manual]
A/D
to select each
W/S
. You can use numerical buttons.
A/
Step 4. Network Setting
1. Refer to “Wired network connection” on pages
18-19 to complete the [Wired] setup option,
and press ENTER (b).
Select [No] and press ENTER (b) to cancel.
2. Refer to “Wireless network connection” on pages
20-22 to complete the [Wireless] option, and
press ENTER (b).
Select [Cancel] and press ENTER (b) to cancel.
This recorder can apply only one network setup
between [Wired] and [Wireless]. If you already
set the [Wired] at step 6, you do not need to set
[Wireless] setting.
System Setting
25
Home Menu Overview
To access numerous functions of the unit, press
HOME on the remote.
Basic button operations
HOME: Accesses or removes the Home Menu.
W/S/A/D
ENTER (b): Acknowledges menu selection.
BACK (1): Exits the menu.
[DTV] - You can watch digital broadcasts.
(pages 38-45)
[Movie] - Plays video contents.
[Photo] - Plays photo contents.
[Music] - Plays audio contents.
[Premium] - Displays the Premium Home
screen.
[LG Apps] - Displays the [LG Apps] screen.
[Setup] - Adjusts the system settings.
[Search] - Searches an online content by
inputting a keyword on the search menu.
[Recording] - Displays [Recording] menu.
[Favorite Apps] - Shortcut for user’s favorite
Apps.
[My Apps] - Displays the [My Apps] screen.
: Used to navigate on-screen displays.
Favorite Apps
Settings
Adjust the Setup Settings
You can change the settings of the player in the
[Setup] menu.
1. Press HOME (n).
2. Use
(b). The [Setup] menu appears.
3. Use
press D to move to the second level.
4. Use
and press ENTER (b) or D to move to the third
level.
to select [Setup] and press ENTER
A/D
to select the first setup option, and
W/S
to select a second setup option,
W/S
3
System Setting
5. Use
ENTER (b) or D to conrm your selection.
to select a desired setting, and press
W/S
System Setting
26
Settings for Digital TV
To use DTV functions, this recorder needs some
settings in advance.
Scanning programmes automatically (Auto Tuning)
All available digital TV or radio programmes are
searched for and stored automatically based on the
selected country.
1. Press HOME.
2. Use
(b).
3. Use
3
System Setting
(b).
4. Use
ENTER (b).
If you do not want to search the channel in
order of number. Please uncheck [Automatic
Numbering] by using ENTER (b).
5. Use S to select [Start], and press ENTER (b) to
begin the channel search.
to select [Setup], and press ENTER
A/D
to select [DTV], and press ENTER
W/S
to select [Auto Tuning] and press
W/S
Scanning programmes manually (Manual Tuning)
Scans digital TV or radio programmes and adds the
detected programmes to the programme list.
1. Display [Setup] menu.
2. Use
(b).
3. Use
ENTER (b) to display the [Manual Tuning]
menu.
4. Use
multiplexer (MUX), and the unit starts scanning
automatically.
5. Use S to select the [Add] and press ENTER
(b) to add the programme the unit scans
automatically.
If the [DTV Lock] option is set to [Lock], this
function is available when you enter the
password correctly. (see page 27.)
to select [DTV], and press ENTER
W/S
to select [Manual Tuning] and press
W/S
W/S/A/D
Note
,
to select the desired
Select [Stop] and press ENTER (b) to stop the
scanning programmes.
Note
,
If the [DTV Lock] option is set to [Lock], this
function is available when you enter the
password correctly. (see page 27.)
System Setting
27
Editing Programme List (Channel Edit)
You can remove any digital TV or radio programs
stored on this recorder using the [Channel Edit]
menu.
1. Display [Setup] menu.
2. Use
(b).
3. Use
press ENTER (b).
4. Press W to select [DTV] and use
[DTV] or [Radio] programme list.
5. Use
want to skip from the list, and press red (R)
coloured button.
If you do not want to skip the programme,
select the programme and press red (R)
coloured button again.
Use
want to lock from the list, and press blue (B)
coloured button.
If you do not want to lock the programme,
select the programme and press blue (B)
coloured button again.
6. Press BACK (1) to return to the previous step.
Skip : If the programme is assigned to skip, you
can’t select that programme with PR button in
Remote control.
Block/unblock : If the programme is assigned
to block and [DTV Lock] in the [Setup] menu is
set to [Lock], you should enter the password to
watch the programme.
to select [DTV], and press ENTER
W/S
W/S/A/D
W/S/A/D
W/S/A/D
to select [Channel Edit] and
to select a programme you
to select a programme you
A/D
to select
Setting the DTV Lock
Allows you to activate or deactivate all of the lock
schemes previously set. When the [DTV Lock] is set
to [Unlock].
1. Display [Setup] menu.
2. Use
W/S/A/D
ENTER (b).
3. Use
W/S
(b).
4. Input the password using numerical buttons.
If you have not set your password yet, input
“1111” and press ENTER (b).
5. Use
W/S
to activate the DTV Lock.
to select [LOCK] and press
to select [DTV Lock] and press ENTER
to select [Lock] and press ENTER (b)
3
System Setting
System Setting
28
Adjusting DTV Rating
Viewing of some digital TV programmes can be
limited according to the age limit you set.
1. Display [Setup] menu.
2. Use
(b).
3. Use
ENTER (b).
4. Input the password using numerical buttons.
If you have not set your password yet, input and
press ENTER (b).
3
System Setting
5. Use
ENTER (b).
Unlock
You can view all programs.
4 (Kids) - 18 (Adult)
Rating [4 (Kids)] has the most restrictions and
[18 (Adult)] is the least restrictive.
to select [LOCK] and press ENTER
W/S
to select [DTV Rating] and press
W/S
to set the limitation level and press
W/S
Setting the antenna power
If you are using indoor antenna with a signal
amplier rated at DC 5V, 100mA, the recorder can
supply power through ANTENNA IN jack.
1. Display [Setup] menu.
2. Use
W/S/A/D
press ENTER (b).
3. Use
W/S
(b) to supply antenna power.
Note
,
The [Antenna 5V] option must be set to [O ]
when your indoor antenna is supplied the
power from the mains. If you set the [Antenna
5V] option to [On] for the indoor antenna
which is supplied power from the mains, it may
cause serious defect to this unit.
to select [Antenna 5V] and
to select [On], and press ENTER
Setting the Timeshift
You can set the Time Shift function automatically
without pressing TIME SHIFT button. The timeshift
will start after Digital TV tuner mode is started.
1. Display [Setup] menu.
2. Use
(b).
3. Use
(b).
to select [DTV], and press ENTER
W/S
to select [Timeshift] and press ENTER
W/S
4. Use
timeshift.
to select [Auto] or [Manual] to apply
W/S
Loading...