English
LG Electronics
BLUETOOTH® Mono Headset
HBM-215 User manual
Rev 1.0 EU
All rights reserved.
LG Electronics Inc., 2010
For optimal performance and to prevent damage to, or misuse of the HBM-215, please read all the information carefully before using the HBM-215.
Any modifications or changes to this manual due to typographical errors or inaccuracies of stated information shall only be made by LG Electronics Inc.
Table of Contents
Introduction |
3 |
|
|
- Included in the package |
3 |
|
|
Description of parts |
4 |
|
|
How to use |
4 |
|
|
- Change direction |
4 |
|
|
- Charging |
5 |
|
|
- Low battery |
5 |
|
|
- Power on |
5 |
|
|
- Power off |
5 |
|
|
- Pairing |
5 |
|
|
|
|||
•Easy pairing |
5 |
|
|
•Manual pairing |
6 |
|
|
- Auto reconnect |
7 |
|
|
- Volume control |
7 |
|
|
- Calling |
7 |
|
|
•Answering a call |
7 |
|
|
•Making a call |
7 |
|
|
•Voice-dialing |
8 |
|
|
•Last number redial |
8 |
|
|
•Ending a call |
8 |
|
|
•Transferring a call |
8 |
|
|
•Call waiting |
8 |
|
|
•Call reject |
8 |
|
|
Summary of button functions |
9 |
|
|
LED indication |
9 |
|
|
Troubleshooting |
10 |
|
|
Specification |
10 |
|
|
Precautions |
11 |
|
|
Declaration of confirmation |
13 |
|
|
Additional information |
13 |
|
|
Limited warranty |
16 |
|
|
Important safety information |
16 |
|
|
Introduction
The LG Bluetooth® Headset HBM-215 is a lightweight wireless headset that uses Bluetooth® technology.
This product can be used as an audio accessory for devices that support the headset or hands-free Bluetooth® profiles.
Included in the package
LG HBM-215 |
Ear loop |
User manual |
Bluetooth® Headset |
|
|
Charger |
Vehicle Power |
WEEE Card |
Connector |
Adaptor |
|
2 |
3 |
Description of parts
Front
Charging Port
LED Indicator
MFB
(Multi-Function Button)
Back
Speaker
Volume UP / Down Button
Mic
How to use
Change direction
How to use
Charging
-Connect the charger to the charging port.
-When the charger is connected, with power on or off, the headset will turn off.
-While charging, the LED indicator will show a solid blue light.
-The buttons will not function while the device is charging.
-It takes 2 hours to fully charge the headset.
-When charging is complete, the LED indicator will turn off.
Low battery
-A low battery tone will sound once every 30 seconds.
-If the battery is not charged, the headset will turn off.
Power on
-Press and hold the MFB for 4 seconds.
•The power will turn on and a startup tone will sound.
Power off
-Press and hold the MFB for 4 seconds.
•A shutdown tone will sound, the Bluetooth link will be disconnected and the power will turn off.
Pairing
-Before using the headset for the first time, it must be paired with a Bluetooth-enabled handset.
-There are 2 pairing modes with the HBM-215.
1)Easy Pairing
•Press and hold the MFB for 4 seconds to turn on the HBM-215.
•The headset will enter auto-reconnect mode for 10 seconds. (if your headset has already been paired with the handset, the headset will automatically reconnect to the handset when the HBM-215 is powered on).
4 |
5 |