<![endif]>ENGLISH
OWNER’S MANUAL
Network Blu-ray Disc™ / DVD
Wireless Home Theater System
Please read this manual carefully before operating your set and retain it for future reference.
MODEL
HB965TZW (HB965TZW, SB95TZ-S/C/W/ W95)
P/NO : MFL65220845
HB965TZW-AF.BSGPLL_ENG_0845.indd1 1 |
2010.4.19 2:22:1 PM |
HB965TZW-AF.BSGPLL_ENG_0845.indd2 2 |
2010.4.19 2:22:13 PM |
Safety Information |
3 |
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning fl ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
Cautions and Warnings
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING: Do not install this equipment in a confi ned space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s instruction has been adhered to.
CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service centre.
Use of controls, adjustments or the performance of procedures other than those specifi ed herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.
1 SafetyInformation
HB965TZW-AF.BSGPLL_ENG_0845.indd3 3 |
2010.4.19 2:22:13 PM |
4Safety Information
1 SafetyInformation
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specifi cation page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fi re. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service centre. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.
This device is equipped with a portable battery or accumulator.
Safety way to remove the battery or the battery from the equipment: Remove the old battery
or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free
reimbursement systems batteries and accumulators. The battery shall not be exposed to excessive heat such as sunshine, fi re or the like.
CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects fi lled with liquids, such as vases, shall be placed on the apparatus.
HB965TZW-AF.BSGPLL_ENG_0845.indd4 4 |
2010.4.19 2:22:13 PM |
Safety Information |
5 |
Notes on Copyrights
•Because AACS (Advanced Access Content System) is approved as content protection system for BD format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analogue signal output, etc., of AACS protected contents. The operation of this product and restrictions on this product may vary depending on your time of purchase as those restrictions may be adopted and/or changed by AACS after the production of this product.
•Furthermore, BD-ROM Mark and BD+ are additionally used as content protection systems for BD format, which imposes certain restrictions including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain additional information on AACS, BD-ROM Mark,
BD+, or this product, please contact an authorized Customer Service Centre.
•Many BD-ROM/DVD discs are encoded with copy protection. Because of this, you should only connect your player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected discs.
•This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for
home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
•Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized recording, use, display, distribution, or revision of television programmes, videotapes, BD-ROM discs, DVDs, CDs and other materials may subject you to civil and/or criminal liability.
Important Notice for TV colour system
The colour system of this player differs according to currently playing discs.
For example, when the player plays the disc recorded in the NTSC colour system, the image is output as an NTSC signal.
Only the multi system colour TV can receive all signals output from the player.
•If you have a PAL colour system TV, you will see just distorted images when using discs or video contents recorded in NTSC.
•The multi system colour TV changes the colour system automatically according to input signals. In case that the colour system is not changed automatically, turn it off and then on to see normal images on screen.
•Even if the disc recorded in NTSC colour system are well displayed on your TV, these may not be recorded correctly on your recorder.
1 SafetyInformation
HB965TZW-AF.BSGPLL_ENG_0845.indd5 5 |
2010.4.19 2:22:13 PM |
6
Contents
1
Safety Information
3Cautions and Warnings
2
Preparation
8Introduction
8About the “” Symbol Display
8Symbols Used in this Manual
9Supplied Accessories
9Playable Discs
11File compatibility
12Regional Code
12AVCHD (Advanced Video Codec High Definition)
12Certain System Requirements
12Compatibility Notes
13Remote control
14Front panel
15Rear panel
3
Installation
16 Assemble the speaker
18Mounting the speakers to a wall
19Speaker Connection
19Attaching the speakers to the player
19Wireless speakers connection
21Positioning the system
22Connecting to Your TV
22HDMI Connection
23What is SIMPLINK?
24Component Video Connection
24Video Connection
25Resolution Setting
25Antenna connection
26Connections with external device
26 |
AUX Connection |
26PORT. IN connection
27OPTICAL IN 1/2 connection
27 Connecting to your Home Network
27Wired network connection
28Wired Network Setup
29Wireless Network Connection
30Wireless Network Setup
33 |
USB device connection |
35 |
Settings |
35 |
Adjust the Setup Settings |
35 |
[DISPLAY] Menu |
37 |
[LANGUAGE] Menu |
37[AUDIO] Menu
38[LOCK] Menu
39[NETWORK] Menu
40[OTHERS] Menu
HB965TZW-AF.BSGPLL_ENG_0845.indd6 6 |
2010.4.19 2:22:14 PM |
41 Sound Effect
4
Operation
42 General Playback
44 Advanced Playback
47 On-Screen display
50Enjoying BD-LIVE
51Playing movie file and VR discs
53Viewing a photo
55Listening to music
58 Playing the iPod
60Radio Operations
61Playing content via your home network
66Using NetCast™ Entertainment Access
66 |
YouTube |
70 |
Picasa Web Albums |
73 |
Using the AccuWeather |
5
Maintenance
75 Notes on Discs
75 Handling the Unit
6
Troubleshooting
76General
77Picture
77Sound
78Network
7
Appendix
79Controlling a TV with the Supplied Remote Control
80Area Code List
81Language code List
82Network Software Update
82 |
Network update notification |
82 |
Software Update |
84Video output resolution
85Trademarks and Licences
87 Specifications
89Important Information Relating to Network Services
90Open source software notice
91Gracenote® End User Licence Agreement
7
1
2
3
4
5
6
7
8
HB965TZW-AF.BSGPLL_ENG_0845.indd7 7 |
2010.4.19 2:22:14 PM |
8Preparation
2 Preparation
2Introduction
<![if ! IE]> <![endif]>Preparation |
About the “ ” Symbol Display |
|
“” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specifi c media.
Symbols Used in this Manual
NOTE
Indicates special notes and operating features.
CAUTION
Indicate cautions for preventing possible damages from abuse.
A section whose title has one of the following symbols are applicable only to the disc represented by the symbol.
|
BD |
BD-ROM disc |
|
|
|
|
|
|
|
|
DVD-Video, DVD±R/RW in |
|
DVD |
Video mode or VR mode |
|
|
|
|
and fi nalized |
|
|
|
|
|
|
|
DVD±R/RW in AVCHD |
|
AVCHD |
|
|
|
|
format |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ACD |
Audio CDs |
|
|
|
|
|
|
|
|
|
|
MOVIE |
Movie fi les |
|
|
|
|
|
|
|
|
|
|
MUSIC |
Music fi les |
|
|
|
|
|
|
|
|
|
|
PHOTO |
Photo fi les |
|
|
|
|
|
HB965TZW-AF.BSGPLL_ENG_0845.indd8 8 |
2010.4.19 2:22:15 PM |
Preparation 9
Supplied Accessories
Video cable (1) |
Colour-coded |
|
Speaker Cables (6) |
Remote control (1) |
Batteries (2) |
FM antenna (1) |
AM antenna (1) |
HDMI cable (1) |
Nero MediaHome4 |
|
Essentials software |
|
CD-ROM (1) |
Wall Mount Bracket |
Screw/ Wall plug |
(Wall/ Speaker) (4) |
(Wall mounting) (8) |
Wireless rear speaker receiver (1)
Playable Discs
Blu-ray Disc
- Discs such as movies that can be purchased or rented.
-BD-R/RE discs that contain Movie, Music or Photo fi les.
DVD-VIDEO 8 / 12 cm disc
Discs such as movies that can be purchased or rented.
DVD±R
8 / 12 cm disc
-Video mode and fi nalized only
-Supports the dual layer disc also
-Finalized AVCHD format
-DVD±R discs that contain Movie, Music or Photo fi les
DVD-RW
8 / 12 cm disc
-VR mode, Video mode and fi nalized only
-Finalized AVCHD format
-DVD-RW discs that contain Movie, Music or Photo fi les.
DVD+RW
8 / 12 cm disc
-Video mode and fi nalized only
-AVCHD format
-Finalized AVCHD format
-DVD+RW discs that contain Movie, Music or Photo fi les.
Audio CD
8 / 12 cm disc
CD-R/RW
8 / 12 cm disc
- CD-R/RW discs that contain audio titles, Movie, Music or Photo fi les.
2
<![if ! IE]><![endif]>Preparation
HB965TZW-AF.BSGPLL_ENG_0845.indd9 9 |
2010.4.19 2:22:15 PM |
10 Preparation
2
<![if ! IE]><![endif]>Preparation
NOTE
•Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.
•Depending on the recording software & the fi nalization, some recorded discs (CD-R/RW, DVD±R/RW, BD-R/RE) may not be playable.
•BD-R/RE, DVD±R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens.
•If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.)
•This player requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality.
•Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA fi les) and these
require certain pre-existing conditions to ensure compatible playback.
•Customers should note that permission is required in order to download MP3 / WMA fi les and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.
•You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live System, you cannot use it on LG player. (Mastered/Live File System : Disc format system for windows Vista)
HB965TZW-AF.BSGPLL_ENG_0845.indd10 10 |
2010.4.19 2:22:18 PM |
Preparation 11
File compatibility
Overall
Available File extensions:
“.jpg”, “.jpeg”, “.png”, “.avi”, “.divx”, “.mpg”, “.mpeg”, “
.mkv”, “.mp4”, “.mp3”, “.wma”, “.wav”
•Available fi le extensions differ depending on the DLNA servers.
•Some “.wav” fi les are not supported on this player.
•The fi le name is limited to 180 characters.
•Depending on the size and number of the fi les, it may take several minutes to read the contents on the media.
Maximum Files/Folder: Less than 2 000 (total number of fi les and folders)
CD-R/RW, DVD±R/RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF and UDF Bridge format
MOVIE
Available resolution size:
1 920 x 1 080 (W x H) pixels
Playable subtitle: SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), VobSub (.sub), SubViewer 1.0 (.sub), SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD Subtitle System (.txt)
•VobSub (.sub) is not available in the [Home Link] feature.
Playable Codec format: “DIVX3.xx”, “DIVX4. xx”, “DIVX5.xx”, “XVID”, “DIVX6.xx” (Standard playback only), H.264/MPEG-4 AVC, MPEG1 SS, MPEG2 PS, MPEG2 TS
Playable Audio format: “Dolby Digital”, “DTS”, “MP3”, “WMA”, “AAC”, “AC3”
•Not all the WMA and AAC Audio formats are
compatible with this unit.
Sampling frequency:
between 32 kHz to 48 kHz (WMA), between 16 kHz to 48 kHz (MP3)
Bit rate:
between 20 kbps to 320 kbps (WMA), between 32 kbps to 320 kbps (MP3)
NOTE
•HD movie fi les contained on the CD or USB 1.0/1.1 may not played properly. BD, DVD or USB 2.0 are recommended to play back HD movie
fi les.
•This player supports H.264/MPEG-4 AVC profile Main, High at Level 4.1. For a fi le with higher level, the warning message will appear on the screen.
•This player does not support the fi les that are recorded with GMC*1 or Qpel*2. Those are video encoding techniques in MPEG4 standard, like DivX or XVID have.
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
MUSIC
Sampling frequency:
between 8 kHz to 48 KHz (WMA), between 11 kHz to 48 kHz (MP3)
Bit rate:
between 8 kbps to 320 kbps (WMA, MP3),
NOTE
•This unit cannot support the ID3 Tag embedded MP3 fi le.
•The total playback time indicated on the screen may not be correct for VBR fi les.
PHOTO
Recommended size:
Less than 4,000 x 3,000 x 24 bit/pixel Less than 3,000 x 3,000 x 32 bit/pixel
•Progressive and lossless compression photo image fi les are not supported.
2
<![if ! IE]><![endif]>Preparation
HB965TZW-AF.BSGPLL_ENG_0845.indd11 11 |
2010.4.19 2:22:18 PM |
12 Preparation
Regional Code
This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD discs labeled same as the rear of the unit or “ALL”.
2 |
AVCHD (Advanced Video Codec |
High Definition) |
|
<![if ! IE]> <![endif]>Preparation |
• The AVCHD format is a high defi nition |
|
• This player can playback AVCHD format |
|
discs. These discs are normally recorded and |
|
used in camcorders. |
|
digital video camera format. |
|
• The MPEG-4 AVC/H.264 format is capable |
|
of compressing images at higher efficiency |
|
than that of the conventional image |
|
compressing format. |
|
• Some AVCHD discs use the “x.v.Colour” |
|
format. |
|
• This player can playback AVCHD discs using |
|
“x.v.Colour” format. |
|
• Some AVCHD format discs may not play, |
|
depending on the recording condition. |
|
• AVCHD format discs need to be fi nalized. |
|
• “x.v.Colour” offers a wider colour range than |
|
normal DVD camcorder discs. |
Certain System Requirements
For high defi nition video playback:
•High defi nition display that has COMPONENT or HDMI input jacks.
•BD-ROM disc with high defi nition content.
•HDMI or HDCP capable DVI input on your display device is required for some content (as specifi ed by disc authors).
•For up-conversion of standard defi nition DVD, a HDMI or HDCP capable DVI input on your display device is required for copy protected content.
Compatibility Notes
•Because BD-ROM is a new format, certain disc, digital connection and other compatibility issues are possible. If you
experience compatibility problems, please contact an authorized Customer Service Centre.
•Viewing high-defi nition content and upconverting standard DVD content may require a HDMI-capable input or HDCPcapable DVI input on your display device.
•Some BD-ROM and DVD discs may restrict the use of some operation commands or features.
•You can use a USB device that is used to store some disc related information,
including downloaded on-line content. The disc you are using will control how long this information is retained.
HB965TZW-AF.BSGPLL_ENG_0845.indd12 12 |
2010.4.19 2:22:18 PM |
Preparation 13
Remote control
1
2
3
4
Battery Installation
Remove the battery cover on the rear of the Remote Control, and insert two R03 (size AAA) batteries with and
matched correctly.
• • • • • • •a • • • • • •
1 (POWER): Switches the player ON or OFF.
Z OPEN/CLOSE: Opens and closes the disc tray.
RADIO&INPUT: Changes input mode.
0-9 numerical buttons: Selects numbered options in a menu.
CLEAR: Removes a mark on the search menu or a number when setting the password.
REPEAT: Repeats a desired section or sequence.
• • • • • • •b • • • • • •
m/M SCAN: Searches backward or forward.
./> SKIP: Goes to the next or previous chapter / track / fi le.
x (STOP): Stops playback.
B (PLAY): Starts playback.
X (PAUSE): Pauses playback
SPEAKER LEVEL: Sets the sound level of desired speaker.
SOUND EFFECT: Selects a sound effect mode.
VOL +/- : Adjusts speaker volume.
OPTICAL: Changes input mode to optical directly.
MUTE: Mute the unit.
• • • • • • •c • • • • • •
HOME: Displays or exits the [Home Menu].
MUSIC ID: When connected to the network, can provide information about the current song during movie playback.
INFO/DISPLAY: Displays or exits On-Screen Display.
Direction buttons: Selects an option in the menu.
ENTER: Acknowledges menu selection.
O RETURN: Exits the menu or resumes playback.
TITLE/POPUP: Displays the DVD title menu or BD-ROM’s pop-up menu, if available.
DISC MENU: Accesses the menu on a disc.
• • • • • • •d • • • • • •
Coloured (R, G, Y, B) buttons: Use to navigate on menus.
MONO/STEREO: Selects mono/ stereo in FM mode.
MARKER: Marks any point during playback.
SEARCH: Displays or exits the search menu.
SLEEP: Sets a certain period of time after which the unit will switch to off.
z REC: Records an audio CD.
MIC +/-:
Adjusts microphone volume.
TV Control Buttons: See page 79.
2
<![if ! IE]><![endif]>Preparation
HB965TZW-AF.BSGPLL_ENG_0845.indd13 13 |
2010.4.19 2:22:20 PM |
14 Preparation
Front panel
1 |
2 |
3 |
4 |
5 |
6 |
7 |
2 |
|
|
|
|
<![if ! IE]> <![endif]>Preparation |
8 |
9 |
10 |
11 |
|
a 1/\ (POWER) Button
b Disc Tray
c iPod Dock
d Remote sensor
e Display window
f Volume control
g Z (OPEN/CLOSE)
h MIC IN 1/2
i PORT. IN
j USB Port
kOperation buttons
B/X (PLAY / PAUSE) x (STOP)
./> (SKIP) F (Function)
Changes the input source or function.
HB965TZW-AF.BSGPLL_ENG_0845.indd14 14 |
2010.4.19 2:22:24 PM |
Preparation 15
Rear panel
1 |
2 |
3 |
4 |
5 |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
aAC Power cord
Plug into the power source.
b Speakers connectors
c Cooling Fan
d Antenna Connector
e VIDEO OUT
f AUX (L/R) INPUT
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6 |
7 |
8 |
9 |
10 |
|
|
g COMPONENT VIDEO (Y PB PR) OUTPUT (PROGRESSIVE SCAN)
h OPTICAL IN 1(TV) / 2
i HDMI OUT (type A, Version 1.3) Connect to TV with HDMI inputs.
j LAN port
2
<![if ! IE]><![endif]>Preparation
HB965TZW-AF.BSGPLL_ENG_0845.indd15 15 |
2010.4.19 2:22:24 PM |
16 Installation
3 Installation
Assemble the speaker
3 |
Preparation |
|
Pole |
||
|
||
<![if ! IE]> <![endif]>Installation |
Pole |
|
Cable |
||
|
||
|
Cable |
BaseBase
|
Screw |
SpeakerSpeaker |
Screw |
|
1.Attach the pole to the base, then secure the connection with a supplied screw.
Step 1
2.Insert a speaker wire from the bottom of the base.
Step 2
HB965TZW-AF.BSGPLL_ENG_0845.indd16 16 |
2010.4.19 2:22:24 PM |
Installation 17
3.Draw the speaker wire through the inside of the pole and also through the hole on the bottom of the speaker.
Step 3 |
4.Attach the speaker to the pole, then secure the connection with a supplied screw.
Step 4
5.Connect the speaker wire to the terminal on the speaker.
Make sure the wire marked black goes in to the terminal marked “–” (minus) and the other wire goes in to the terminal marked “+” (plus).
Step 5
3
<![if ! IE]><![endif]>Installation
CAUTION
Be careful that the speaker should not fall down. Otherwise it may result in the speaker malfunctioning and causing personal injury and/ or property damage.
HB965TZW-AF.BSGPLL_ENG_0845.indd17 17 |
2010.4.19 2:22:25 PM |
18 Installation
Mounting the |
2. Attach the speaker bracket to the speaker |
|
and fasten the screws. |
||
speakers to a wall |
|
|
Step 2 |
||
|
|
You can mount the speakers to a wall. Prepare screws and brackets supplied.
1.Attach the wall bracket to the wall with screws as shown in the illustration below.
When you mount to a wall(concrete), use the wall plugs. You should drill some holes
3(Diameter: 6 mm, Depth: more than 32 mm)
<![if ! IE]> <![endif]>Installation |
for the mounting. |
3. Hang the speaker bracket onto the wall |
|
||
|
3.5 mm |
|
|
Screw & Wall plug |
bracket. |
|
|
Step 3 |
20 mm
6 mm
32 mm
Step 1
Wall plug |
|
4. Press the speaker to secure the brackets. |
|
Wall l |
|
|
|
|
|
|
Step 4 |
|
|
ScrScrew
HB965TZW-AF.BSGPLL_ENG_0845.indd18 18 |
2010.4.19 2:22:25 PM |
Installation
Speaker Connection
Attaching the speakers to the player
1.Connect speaker wires to the main unit. Each speaker wire is color-coded. Use matching color wires for corresponding speakers.
color |
Speaker |
Position |
Green |
Center |
Center |
|
|
|
Orange |
Sub |
Any front position |
|
woofer |
|
|
|
|
Red |
Front |
Front right |
|
|
|
White |
Front |
Front left |
|
|
|
2.Connect speaker wires to the wireless receiver. Use the same method for connecting rear speakers to the wireless receiver unit.
CAUTION
•Be careful to make sure children not to put their hands or any objects into the *speaker duct. *Speaker duct: A hole for plentiful bass sound on speaker cabinet (enclosure).
•Place the Center speaker at a safe distance from the child’s reach.
Otherwise it may result in the speaker falling down and causing personal injury and/or property damage.
•The speakers contain magnet parts, so color irregularity may occur on the TV screen or PC monitor screen. Please use the speakers away from the TV screen or PC monitor screen.
Wireless speakers connection
LED indicator of wireless receiver
LED Color |
Operation |
Blue |
The wireless receiver is |
|
receiving the signal of the |
|
wireless transmitter. |
|
|
Red |
The Wireless Receiver is in |
|
standby mode. |
|
|
Off (No |
The Wireless Receiver is |
display) |
turned off. |
|
|
Initial setting an ID of wireless receiver
1.Connect the Wireless Receiver and the rear speaker (right, left) with the speaker cables.
2.Connect the power cord of the Wireless Receiver to the outlet.
3.Turn on the main unit and Wireless Receiver: The main unit and wireless receiver will be automatically connected. “z” appears in display window.
19
3
<![if ! IE]><![endif]>Installation
HB965TZW-AF.BSGPLL_ENG_0845.indd19 19 |
2010.4.19 2:22:26 PM |
20 Installation
Setting an ID of wireless receiver
When the unit is manufactured, the ID is already set. If an interference occurs or you use a new wireless receiver, an ID should be set again.
About Ferrite Core (for EMI only)
Be sure to attach the ferrite core to the speaker cable (for connecting to this unit and wireless receiver). This ferrite core can reduce noises.
1.Turn on the main unit and turn off the wireless receiver.
2.Press and hold x (STOP) on the front of unit and MUTE on the remote control. “REMATE” appears in display window.
3.Turn on the Wireless Receiver. A new ID is set.
How to attach the ferrite core
1.Press the stopper [a] of the ferrite core to open.
2.Wind the speaker cables once on the ferrite core.
3.Close the ferrite core until it clicks. Refer to the fi g.3 and comment.
3
<![if ! IE]><![endif]>Installation
NOTE
•If there is a strong electromagnetic wave product nearby, interference may occur. Put the unit (Wireless Receiver and main unit) away from there.
•If there is no audio signal for longer than 10 minutes, the Wireless Receiver will automatically switch to standby mode. In power saving mode, both LEDs will turn red. LEDs will turn blue when there is any audio signal back.
•If you operate main unit then wireless speakers (rear speakers) sound within a few seconds in standby mode.
•Set the distance between this unit and Wireless Receiver within 10 m (32 ft.).
•Optimum performance can be implemented only when the Wireless Transmitter and the Wireless Receiver within distance of 2 m (6 ft.) to 10 m (32 ft.) is used since communication failure may occur if longer distance is used.
•Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are reversed, the sound will be distorted and will lack bass.
•It takes a few seconds (and may take longer) for the Wireless Transmitter and Wireless Receiver to communicate with each other.
•Use the rear speaker at least 30 cm (11 inch) away from either TV screen or PC monitor.
Rear of wireless receiver
The length here is as short as possible.
HB965TZW-AF.BSGPLL_ENG_0845.indd20 20 |
2010.4.19 2:22:27 PM |
Installation 21
Positioning the system
The following illustration shows an example of positioning the system. Note that the illustrations in these instructions differ from the actual unit for explanation purposes.
For the best possible surround sound, all the speakers other than the subwoofer should be placed at the same distance from the listening position (A).
B
C
A G
F
AA
A
A E
DA
AFront left speaker (L)/ BFront right speaker (R):
Place the front speakers to the sides of the monitor or screen and as fl ush with the screen surface as possible.
CCentre speaker:
Place the centre speaker above or below the monitor or screen.
DSurround left speaker (L)/ ESurround right speaker (R):
Place these speakers behind your listening position, facing slightly inwards.
FSubwoofer:
The position of the subwoofer is not so critical, because low bass sounds are not highly directional. But it is better to place the subwoofer near the front speakers. Turn it slightly toward the centre of the room to reduce the wall refl ections.
G Unit
3
<![if ! IE]><![endif]>Installation
HB965TZW-AF.BSGPLL_ENG_0845.indd21 21 |
2010.4.19 2:22:27 PM |
22 Installation
3
<![if ! IE]><![endif]>Installation
Connecting to Your TV
Make one of the following connections, depending on the capabilities of your existing equipment.
•HDMI connection (pages 22-23)
•Component Video connection (page 24)
•Video connection (page 24)
NOTE
•Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described in this manual.
•Please refer to the manuals of your TV, stereo system or other devices as necessary to make the best connections.
•Make sure the player is connected directly to the TV. Tune the TV to the correct video input channel.
•Do not connect your player via your VCR. The image could be distorted by the copy protection system.
HDMI Connection
If you have a HDMI TV or monitor, you can connect it to this player using a HDMI
cable(Type A, Version 1.3). Connect the HDMI OUT jack on the player to the HDMI IN jack on a HDMI compatible TV or monitor.
HDMI Connection |
AM |
PlayerPlayer |
TV |
TV |
Set the TV’s source to HDMI (refer to TV’s Owner’s manual).
HB965TZW-AF.BSGPLL_ENG_0845.indd22 22 |
2010.4.19 2:22:28 PM |
Installation 23
NOTE
•Changing the resolution when the connection has already been established may result in malfunctions. To solve the problem, turn off the player and then turn it on again.
•When the HDMI connection with HDCP is not verifi ed, TV screen is changed to black screen. In this case, check the HDMI connection, or disconnect the HDMI cable.
•If there is noise or lines on the screen, please check the HDMI cable (length is generally limited to 4.5 m and use a high speed HDMI cable (version 1.3).
•If a connected HDMI device does not accept the audio output of the player, the HDMI
device’s audio sound may be distorted or may not output.
•When you use HDMI connection, you can change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 25.)
•Select the type of video output from the HDMI OUT jack using [HDMI Color Setting] option on the [Setup] menu (see page 36).
•When you connect a HDMI or DVI compatible device make sure of the following:
-Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player.
-The connected device’s video input is set correctly for this unit.
-The connected device is compatible with 720x576p, 1280x720p, 1920x1080i or 1920x1080p video input.
•Not all HDCP-compatible HDMI or DVI devices will work with this player.
-The picture will not be displayed properly with non-HDCP device.
-This player does not playback and TV screen is changed to black screen.
What is SIMPLINK?
Some functions of this unit are controlled by the TV’s remote control when this unit and LG TV’s with SIMPLINK are connected through HDMI connection.
Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop, Power Off, etc.
Refer to the TV owner’s manual for the details of SIMPLINK function.
LG TV’s with SIMPLINK function has the logo as shown above.
NOTE
•Depending on the disc type or playing status, some SIMPLINK operation may differ from your purpose or not work.
•When you use SIMPLINK function, you have to connect to the OPTICAL IN 1 jack to enjoy TV sound to your speaker system.
3
<![if ! IE]><![endif]>Installation
HB965TZW-AF.BSGPLL_ENG_0845.indd23 23 |
2010.4.19 2:22:28 PM |
24 Installation
3
<![if ! IE]><![endif]>Installation
Component Video Connection |
|
Video Connection |
Connect the COMPONENT VIDEO OUT jacks on |
|
Connect the VIDEO OUT jack on the player to |
the player to the corresponding input jacks on |
|
the video in jack on the TV using a video cable. |
the TV using Y Pb Pr cables. You can hear the |
|
You can hear the sound through the system’s |
sound the through the system’s speaker. |
|
speakers. |
|
|
|
Component Connection |
|
Video Connection |
|
||
|
|
|
AM |
PlayerPlayer |
Player |
|
Player |
GreenGreen |
Yellowll |
BlueBlue |
|
Red |
TVTV |
Red |
TVTV
NOTE
When you use COMPONENT VIDEO OUT connection, you can change the resolution for the output. (Refer to “Resolution setting” on page 25.)
HB965TZW-AF.BSGPLL_ENG_0845.indd24 24 |
2010.4.19 2:22:29 PM |
Installation 25
Resolution Setting
The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu.
1.Press HOME ().
2.Use I/i to select the [Setup] and press ENTER (). The [Setup] menu appears.
3.Use U/u to select [DISPLAY] option then press i to move to the second level.
4.Use U/u to select the [Resolution] option
then press ENTER () or i to move to the third level.
5.Use U/u to select the desired resolution
then press ENTER () to confi rm your selection.
NOTE
•If your TV does not accept the resolution you have set on the player, you can set resolution to 576p as follows:
1.Press Z to open the disc tray.
2.Press x for more than 5 seconds.
•Since several factors affect the resolution of video output, see “Video Output Resolution” on page 84.
Antenna connection
Connect the supplied antenna for listening to the radio.
Antenna Connection
PlayerPlayer
AM |
NOTE
•To prevent noise pickup. keep the AM Loop antenna away from the unit and other components.
•After connecting the FM wire antenna, keep it as horizontal as possible. Be sure to fully extend the FM wire antenna.
3
<![if ! IE]><![endif]>Installation
HB965TZW-AF.BSGPLL_ENG_0845.indd25 25 |
2010.4.19 2:22:29 PM |
26 Installation
3
<![if ! IE]><![endif]>Installation
Connections with external device
AUX Connection
You can enjoy the sound of your component with the analogue audio output jacks from the speakers of the system.
Connect the analogue audio output jacks of your component into the AUX L/R (INPUT) on this unit. And then select the [AUX] option by pressing RADIO&INPUT and ENTER ().
You can also use F button on the front panel to select the input mode.
AUX Connection |
AM |
PlayerPlayer |
Red |
Red |
White |
White |
To the audio output jacks |
To the audio output jacks |
of your component |
of your component |
(TV, VCR, etc.) |
(TV, VCR, etc.) |
PORT. IN connection
You can enjoy the sound of your portable audio player from the speakers of the system.
Connect the headphones (or line out ) jack of the portable audio player into the PORT. IN of this unit. And then select the [PORTABLE] option by pressing RADIO&INPUT and ENTER ().
You can also use F button on the front panel to select the input mode.
PORT.IN Connection |
MP3 player, etc... |
twZG SG UUU |
HB965TZW-AF.BSGPLL_ENG_0845.indd26 26 |
2010.4.19 2:22:30 PM |
Installation 27
OPTICAL IN 1/2 connection
Connecting to your Home Network
You can enjoy the sound of your component with the digital optical connection from the speakers of the system.
Connect the optical output jack of your component into the OPTICAL IN 1/2 jacks on the unit. And then select the [OPTICAL 1/2] option by pressing RADIO&INPUT and ENTER (). Or press OPTICAL to select directly.
You can also use F button on the front panel to select the input mode.
Optical Connection |
AM |
To the digital |
To the digital |
optical output jack |
optical output jack |
ofofyouryourcomponentcomponent |
This player can be connected to a local area network (LAN) via the LAN port on the rear panel or the internal wireless module.
By connecting the unit to a broadband home network, you have access to services such
as software updates, Home Link, BD-LIVE interactivity and streaming services.
Wired network connection
Using a wired network provides the best performance, because the attached devices connect directly to the network and are not subject to radio frequency interference. Please refer to the documentation for your network device for further instructions. Connect the player’s LAN port to the corresponding port on your Modem or Router
using a commercially available LAN or Ethernet cable (CAT5 or better with RJ45 connector).
In the example confi guration for wired connection below, this player would be able to access content from either of the PCs.
3
<![if ! IE]><![endif]>Installation
HB965TZW-AF.BSGPLL_ENG_0845.indd27 27 |
2010.4.19 2:22:30 PM |
28 Installation
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wired Network Setup |
||
|
Wired Network Connection |
||||||||||||||||||||||
|
|||||||||||||||||||||||
|
|
|
|
||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Before setting the wired network, you need to |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
connect the broadband internet to your home |
||||
|
|
RouterRout |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
network. |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If there is a DHCP server on the local area |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BroadbandBroadband |
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
network (LAN) via wired connection, this player |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Service |
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Service |
|
will automatically be allocated an IP address. |
||
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
WAN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
After making the physical connection, a small |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
number of home networks may require the |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
LAN 1 |
|
|
|
|
|
|
|
|
|
|
|
PC |
player’s network setting to be adjusted. Adjust |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
the [NETWORK] setting as follows. |
||
|
|
|
|
LAN 2 |
|
|
|
|
|
|
|
|
|
|
|
|
PC |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1. Select [Connection Setting] option in the |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
3 |
|
|
|
LAN 3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
[Setup] menu then press ENTER ( ). |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
<![if ! IE]> <![endif]>Installation |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2. The [Connection Setting] menu appear on |
|
the screen. Use U/u to select the [Wired] |
PlayerPlayer |
and press ENTER ( ). |
NOTE
•When plugging or unplugging the LAN cable, hold the plug portion of the cable. When unplugging, do not pull on the LAN cable but unplug while pressing down on the lock.
•Do not connect a modular phone cable to the LAN port.
•Since there are various connection
confi gurations, please follow the specifi cations of your telecommunication carrier or internet service provider.
•If you want to access content from PCs or DLNA servers, this player must be connected to the same local area network with them via a router.
3.Selects [Yes] and press ENTER () to continue. The new connection setting resets the current network settings.
HB965TZW-AF.BSGPLL_ENG_0845.indd28 28 |
2010.4.19 2:22:31 PM |