LG GSL545PVYV, GSL545WBYV, GSL545NSQV, GSL545NSYV, GSL545WBQV Owner's Manual
...
ENGLISH
OWNER’S MANUAL
SXS
REFRIGERATOR
Please read this owner's manual thoroughly before
operating and keep it handy for reference at all times.
P/No. : MFL67890001_rev.01
1_MFL67795101_Eng.indd 101 2013.4.15 9:5:43 AM
www.lg.com
Electrical Connections
1
ENGLISH
Introduction
Installation
Suggestion on
food storage
maintenance
The wires in this mains lead are coloured in accordance with the following code:
As the colours of the wires in the mains lead of this apparatus may not correspond
with the coloured markings identifying the terminals in your plug, proceed as
follows:
The wire which is coloured Green and Yellow must be connected to the terminal in
the plug which is marked with the letter E or by the earth symbol( ) or coloured
Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked
with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is
marked with the letter L or coloured Red.
If a 13 amp(BS 1363) plug is used, fit a 13 amp BS 1362 fuse.
GREEN AND YELLOW : EARTH
BLUE : NEUTRAL
BROWN : LIVE
This appliance must be earthed.
Important
(In the UK Only)
Green and Yellow(Earth)
Brown(Live)
Blue(Neutral)
Fuse
Cord grip
1_MFL67795101_Eng.indd 1 2013.4.15 9:5:43 AM
2
Introduction
Installation
Operation
Table of contents
Entry
Important safety instructions
Identification of parts
Where to Install
Door removal
Door replacement
Feed water pipe installation
Door Height adjustment
Starting
Adjusting the temperatures and functions
Refreshment centre(Applicable to some models only)
Shelf
Dairy corner
Wine holder (Applicable to some models only)
Deodorizer (Applicable to some models only)
Freezer Compartment (Applicable to some models only)
Egg box (Depends on model)
Using door rack (Applicable to some models only)
Freezer/Fridge door rack
No Plumbing Ice & Water (Applicable to some models only)
ENGLISH
3
3
6
7
8
9
9
10
12
12
20
21
21
21
22
22
23
23
23
24
Suggestion on
food storage
Care and
maintenance
1_MFL67795101_Eng.indd 2 2013.4.15 9:5:43 AM
Location of foods
Storing foods
General information
Suggestion for energy saving
Cleaning
Cleaning the water dispenser and the water tank.(Applicable to some models only)
Smart Diagnosis
Trouble shooting
25
26
27
28
28
29
30
31
Introduction
3
ENGLISH
Entry
The model and serial numbers are found on the inner case on the back or one side
of the refrigerator compartment of this unit. These numbers are unique to this
unit and are not available to others. You should record requested information here
and retain this guide as a permanent record of your purchase. Staple your receipt
here.
Date of purchase :
Dealer purchased from :
Dealer address :
Dealer phone no. :
Model no. :
Serial no. :
Important safety instructions
Before it is used, this refrigerator must be properly installed and located in accordance
with the installation instructions in this document. This Refrigerator is intended for
Domestic indoor use only.
Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and
pull it straight out from the outlet.
When moving your appliance away from the wall, be careful not to roll over the power
cord or to damage it in any way.
After your refrigerator is in operation, do not touch the cold surfaces in the freezer
compartment, particularly when your hands are damp or wet. Skin could adhere to these
extremely cold surfaces.
Unplug the power cord from the power outlet for cleaning or other maintenance. Never
touch the appliance with wet hands as you may receive an electric shock or injure
yourself.
Never damage, press, severely bend, pull or twist the power cord as damage to the cord
may cause a fire or electric shock. Naver touch the cord if you are uncertaim if the
appliance is correctly earthed.
The fuse on the refrigerator must be changed by a qualified technician or service
company.
- Failing to do so may result in electric shock or personal injury.
Never place glass items in the freezer as they may break due to expansion of their
contents on freezing.
Never put your hands into the storage bin of the automatic ice maker as you could be
injured during its operation.
The appliance is not intended for use by young children or infirm persons without
supervision.
Young children should be supervised to ensure that they do not play with the appliance.
Never allow anyone to climb, sit, stand or hang on the refreshment centre door. These
actions may damage the refrigerator and even tip it over, causing severe personal injury.
Child entrapment
Don’t use an
extension cord
WARNING
WARNING
WARNING
WARNING
WARNING
Accessibility of
Supply Plug
Supply Cord
Replacement
1_MFL67795101_Eng.indd 3 2013.4.15 9:5:43 AM
Introduction
4
ENGLISH
DANGER: Risk of child entrapment.
Before you dispose of your old refrigerator please remove doors but leave the shelves in
place so that children cannot climb inside.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Do not store or use gasoline or other flammable vapour and liquids in the vicinity of this
or any other appliance.
In the event of an electric short circuit, grounding (earthing) reduces the risk of electric
shock by providing an escape wire for the electric current.
In order to prevent possible electric shock this appliance must be earthed. Improper
connection of the earthing plug can cause electric shock. Consult a qualified electrician
or service engineer if the earthing instructions are not completely understood, or if you
have doubts as to whether the appliance is properly earthed.
Do not move refrigerator while the refrigerator is operating.
Compressor may occur a temporary rattling noise.
(This is normal and will not impact on the performance or the life of the compressor.
The rattling will stop after the refrigerator comes to a rest.)
It is advised that this appliance should be connected through an independent power
socket to prevent it and other appliances from overloading the circuit and causing a
power outage.
The appliance should be positioned so that the supply plug is easily accessible for quick
disconnection should an accident occur.
If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
Do not modify or extend the Power Cord length. It may cause electric shock or fire.
Connect the power plug in proper position with the cord hanging down.
- If you connect the power plug upside down, wire can get cut off and cause fire or
electric shock.
Make sure that the power plug is not squashed or damaged by the back of the
refrigerator.
Child entrapment
Don’t store
Grounding
(Earthing)
Don’t use an
extension cord
WARNING
WARNING
WARNING
WARNING
Accessibility of
Supply Plug
Supply Cord
Replacement
1_MFL67795101_Eng.indd 4 2013.4.15 9:5:44 AM
Introduction
5
ENGLISH
•
Keep ventilation openings in the room where the appliance is installed clear of
obstruction.
•
Do not use mechanical devices or other means to accelerate the defrosting process,
other than those recommended by the manufacturer.
•
Do not damage the refrigerant circuit.
•
Do not use electrical appliances inside the food storage compartments of the
appliance, unless they are of the type recommended by the manufacturer.
•
Disposal procedures. If disposing of this appliance, please consult with a service
agent or a similarly qualified person for more details.
•
Do not store explosive substances such as aerosol cans with a flammable propellant
in this appliance.
•
Do not use aerosols near the refrigerator.
- Aerosols used near the refrigerator may cause an explosion or fire.
This appliance may contain (Check the rating/comliance label for the refriger-ant type
and amount. Applicable to some models only) a small amount of isobutane refrigerant
(R600a), natural gas with high environmental compatibility, but it is also combustible.
When transporting and installing the appliance, care should be taken to ensure that no
parts of the refrigerating circuit are damaged. Refrigerant squirting out of the pipes
could ignite or cause an eye injury. If a leak is detected, avoid any naked flames or
potential sources of ignition and air the room in which the appliance is standing for
several minutes.
In order to avoid the creation of a flammable gas air mixture if a leak in the refrigerating
circuit occurs, the size of the room in which the appliance may be sited depends on the
amount of refrigerant used. The room must be 1m
2
in size for every 8g of R600a
refrigerant inside the appliance. The amount of refriger-ant in your particular appliance is
shown on the Identification plate inside the appliance. Never start up an appliance
showing any signs of damage. If in doubt, consult your dealer.
WARNING
1_MFL67795101_Eng.indd 5 2013.4.15 9:5:44 AM
door rack (Optional)
Automatic Icemaker
Process of freezing
occurs the fastest
on the marked shelf
Extra
Shelf
LED Lamp
Door rack
Drawer (2)
Identification of parts
Model: GSL54*****, GSP54*****, GWL31****, GWP31****
Freezer
Compartment
Refrigerator
Compartment
Introduction
Dairy Corner
LED Lamp
Shelf
Wine rack (Optional)
Door Rack
Refreshment center
(Optional)
Shelf
No Plumbing Ice &
Water (Optional)
Egg Box (Optional)
Door Rack
ENGLISH
Door rack
Space plus
Door rack
Automatic
ice maker
LED Panel
Shelf
Process of freezing
occurs the fastest
on the marked shelf
Door rack
Vegetable drawer
Lower cover
Model: GSL32*****, GSP32*****, GWL27****, GWP27****
Freezer
Compartment
Refrigerator
Compartment
Vegetable drawer
Door Rack
Egg Tray
Dairy Corner
Filter
LED Panel
Door rack
Shelf
Refreshment Centre
(Optional)
No Plumbing
Ice & Water (Optional)
Door rack
Vegetable drawer
Door rack
NOTE
Parts, features, and options vary by model. Your model may not include every option.
6
1_MFL67795101_Eng.indd 6 2013.4.15 9:5:45 AM
Installation
7
ENGLISH
1. Place your appliance where it is easy to use.
2. Avoid placing the unit near heat sources, di-rect
sunlight or moisture. Do not operate the appliance
outdoors where it can be exposed directly, or
indirectly to sun, wind and rain.
3. To ensure proper air circulation around the
fridge-fteezer, please maintain sufficient space
on both the sides as well as top and maintain at
least 2 inches (5 cm) from the rear wall.
4. To avoid vibrations, the appliance must be levelled.
5. Do not install the appliance in temperatures of less than 5°C as the
performance may be affected.
Select a good
location
Where to Install
Disposal of the
old appliance
Before
Installation
Appliance
usage range
This appliance contains fluid (refrigerant, lubricant) and is made of parts and materials
which are reusable and/or recyclable.
All the packaging materials should be sent to the collection centre for recycling. For
details of your local recycling centre, please contact your local council.
Ensure that none of the pipes on the back of the appliance are damaged prior to
disposal.
The appliance must be positioned so that the plug is accessible after installation.
Never use gas pipes, telephone lines or other potential lightening rods as ground.
- Improper use of the ground plug can result in electric shock.
If the appliance generates a strange noise, a burning or smell or smoke, unplug the
power plug immediately and contact your nearest service center.
If any dust or water is in refrigerator, pull out power plug and contact your LG Electronics
service center.
- There is a risk of fire.
The water supply to this refrigerator must only be installed/connected by a suitably
qualified person and connect to a potable water supply only.
Use only the ice maker provided with the refrigerator.
When installing, servicing or cleaning behind the refrigerator, be sure to pull the unit
straight out and push back in straight after finishing.
After unpacking, keep the packing materials out of reach of children.
- There is a risk of death from suffocation if children put them over their head.
This appliance is intended to be used in household and similar applications such as
– staff kitchen areas in shops, offices and other working environments;
– farm houses and by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments;
– catering and similar non-retail applications.
More than
5 cm to back
Remove the
compartment
Remove feed
Remove the
compartment
WARNING
Keep it at a
proper distance
Keep it at a
proper distance
1_MFL67795101_Eng.indd 7 2013.4.15 9:5:45 AM
Installation
8
ENGLISH
Door removal
Electric Shock Hazard
Disconnect electrical supply to refrigerator before
installing. Failure to do so could result in death or
serious injury. If your front door is too narrow to get
the refrigerator into the house, remove the refrigerator
doors and pass the appliance through laterally.
Applicable to No Plumbing
Ice & Water Model only
Lower cover
Remove lower
cover and then
feed water tube
Remove the
freezer
compartment
door
Feed water tube
Feed water tube
Remove the lower cover by loosening all the screws. Then push in the feed water tube
while depressing the connector , as shown in the illustration on the right.
NOTE
•
If a tube end is deformed or abraded, trim the end with sharp knife until perfectly round.
1) Remove the hinge cover by loosening
Hinge cover
the screws. Then separate all
connection wires except for the earth.
Upper hinge
2) Remove the keeper by rotating it counter clockwise
(c) and then lifting the upper hinge up (d).
Keeper
Connection
wires
Upper hinge
NOTE
•
When removing the upper hinge, be careful that
the door does not fall forwards.
3) Remove the freezer compartment door by lifting it
upward. The door should be lifted high enough for the
feed water pipe tube to be completely pulled out.
NOTE
•
If you have removed the refrigerator compartment
Lower hinge
Engough for
water feed pipe
tube to be completely
pulled out
door to pass the appliance through an access door, lay
the door down, but be careful not to damage the feed
water pipe tube.
Remove the
refrigerator
compartment
1) Loosen the hinge cover screws and
remove the cover. Remove connection
wires, if any, except for the earth line.
Connection
wires
door
1_MFL67795101_Eng.indd 8 2013.4.15 9:5:49 AM
Installation
9
ENGLISH
After levelling
the door height
1
2
3
4
5
M
a
x
FRZ
TEMP
REF
TEMP
Min
5
4
3
21
Max
•
Connect to potable water supply only. (for Plumbing Type)
•
Fill with potable water only. (for Non-Plumbing Type)
WARNING
Before
Installation
Upper hinge
Keeper
Pass the
refrigerator
2) Remove keeper by rotating it clockwise (c) and
then remove the upper hinge by lifting it up (d ).
3) Remove the refrigerator compartment door by
lifting it up.
Lower hinge
Pass the refrigerator laterally through the
access door as illustrated to the right.
Door replacement
Once the fridge is through the access door, remount the fridge doors by following the
door removal instructions in reverse.
Feed water pipe installation
2
) (The pressure is correct when an instant paper cup (180 cc) is in 3 sec.).
cm
2
mc/fgk 5.1( aPk 741 gnitar eht hcaer ton seod erusserp retaw fI
necessary to purchase a separate pressure pump for normal automatic icing and cool
water feed.
Keep the total length of the feed water pipe tube within 8 m and be careful that the
tube does not bend. If the tube is 8 m or longer it may cause water feed problems
owing to the drain water pressure.
Install the feed water pipe tube at a place free from heat.
Connect to drinking water supply only.
) or below, it is
/fgk 5.8~5.1( aPk 438~741 fo erusserp retaw sdeen noitarepo rekam eci citamotuA
.noitallatsni rof tik retlif retaw htiw snoitcurtsni ot refeR
.ruoloc emas hctam ebut retaw eht taht luferac eB
.denimaxe eb dluohs secalp eseht ni egakael eht ,desu gnieb erofeB
.NOITALLATSNI ENIL RETAW revoc ton seod ytnarraW GL
The cost of connection to a water supply is at the customer expense, unless included
in the delivery charge (refer to the delivery agreement with the seller)
1_MFL67795101_Eng.indd 9 2013.4.15 9:5:50 AM
.dedeen fi noitallatsni eht rof rellatsnI desirorhtua ro rebmulP tcatnoc esaelP
.rellatsni tcatnoc esaelP ,noitallatsni reporpmi ot eud srucco egakael retaW fI
Installation
10
ENGLISH
Door Height adjustment
-
Method 1 is recommended.
- Use 1 spanner for freezer.
Method 1 (recommended)
Open the door and adjust the level by using a nut of height
adjusting screw on the lower side of a door with a spanner.
1. Using large side of spanner, rotate release-preventive nuts (
) clockwise to
release rotate release-preventive nuts' tightness.
2. Rotate the Adjust-hinge pin either (
) clockwise or ( ) counter-clockwise
using a narrow side of a spanner to adjust the level difference between the
refrigerator door and freezer door.
3. After adjusting door height, please firmly tighten the Release-prevention nuts
(
) counter-clockwise to the end.
The refrigerator doors will close smoothly by adjusting the front side using the height
adjustment screw. If the doors do not close correctly, performance may be affected.
After levelling
the door height
Next
1. Wipe off all dust accumulated during shipping and clean your appliance thoroughly.
2. Install accessories such as the ice cube box, cover evaporating tray, etc., in their
proper places. They are packed together to prevent possible damage during shipping.
3. Connect the power supply cord (or plug) to the outlet. Don’t double up with other
appliances on the same outlet.
•
Do not adjust the height level too much. The hinge pin can be fallen out.
(Range of height adjustment : Max. 3mm)
Height difference
CAUTION
Spanner
Release
Preventing Nut
Adjust Hinge Pin
Lower Door
Down
Raising
Door Up
Raising
Door Up
Release
Preventing Nut
Adjust Hinge Pin
Lower Door
Down
Raising
Door Up
Nut Releasing Nut Tightening
Model: GSL54*****, GSP54*****, GWL31****, GWP31****
Method 2 (only for Plumbing type)
1_MFL67795101_Eng.indd 10 2013.4.15 9:5:51 AM
Door Height adjustment
ENGLISH
11
Installation
If the freezer
compartment
door is lower than
the refrigerator
compartment
door
If the freezer
compartment
door is higher than
the refrigerator
compartment
door
Model: GSL32*****, GSP32*****, GWL27****, GWP27****
Levelthedoorbyinsertingflat(-type)driverintothegrooveoftheleftheight
adjustingscrewandrotateitclockwise().
Left height
adjustment screw
Levelthedoorbyinsertingflat(-type)driverintothegrooveoftheleftheight
adjustingscrewandrotateitclockwise().
①
Height
①
Height
Right height
adjustment screw
After levelling
the door height
Next
The refrigerator doors will close smoothly by adjusting the front side using the
height adjustment screw. If the doors do not close correctly, performance may be
affected.
1. Wipe o all dust accumulated during shipping and clean your appliance
thoroughly.
2. Install accessories such as the ice cube box, cover evaporating tray, etc., in their
proper places. They are packed together to prevent possible damage during
shipping.
3. Connect the power supply cord (or plug) to the outlet. Don’t double up with
other appliances on the same outlet.
1_MFL67795101_Eng.indd 10 2013.4.15 9:5:51 AM
Loading...