LG GSA-H44N User Manual

Super Multi DVD Rewriter

GSA-H44N

English

Deutsch

Français

Italiano Español

Português

i

CAUTION : The laser used in the Super Multi DVD Rewriter can damage
your eyes. Do not attempt to open the cover. To reduce the risk of electric shock,
do not remove the cover (or back). There are no user-serviceable parts inside.
Refer servicing to qualified service personnel.
Use of controls or performance of procedures other than those specified herein
may result in hazardous radiation exposure.

WARNING : To reduce the risk of fire or electric shock, do not expose this

appliance to rain or moisture.

Industry Canada requirement

This class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du

Canada.

FCC COMPLIANCE STATEMENT
Note : This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio
communications.

However, there is no guarantee that interference will not

occur in a particular installation.

If this equipment does cause harmful

interference to radio or television reception,

which can be determined by

turning the equipment off and on, the user is encouraged

to try to correct

the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

- Consult the dealer or an Authorized Service Center for help.

• FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.

• This Super Multi DVD Rewriter is for use only with UL listed personal computers that have
installation instructions detailing user-installation of card cage accessory.

This product is manufactured to comply with the radio interference
requirements of EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC.

CAUTION - VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.

AVOID EXPOSURE TO THE BEAM.

VARNING - OSYNLIG LASERSTRÄLNING NÄR DENNA DEL ÄR ÖPPNAD

STRÄLEN ÄR FARLIG.

CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
CLASE 1 PRODUCTO LÁSER
CLASSE 1 PRODOTTO LASER

ii

The appliance is not intended for use by young children or infirm persons without
supervision.

Contents

1

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Important Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

System Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Location and Function of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Installing the Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Device Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

How to Use the Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

■ Microsoft

®

and Windows®are trademarks registered in the United States and

other countries by the Microsoft Corporation.

■ DVD Logo is a trademark of DVD Format/Logo Licensing Corp., registered in

U.S., Japan and other countries.

■ The company names and product names written in this manual are trademarks

or registered trademarks of the respective companies.

Features

Important Precautions

• Enhanced-IDE (ATAPI) interface.

• Power tray loading and ejection of disc. (The disc can also be ejected manually.)

• Combination CD-R/RW, DVD-R/RW, DVD-R DL, DVD+R/RW, DVD+R DL,
DVD-RAM Drive functions into one drive.

• Supports Region playback control Phase II.

• Supports Windows 2000 Professional, XP Home Edition, XP Professional, Vista.

• Automatic buffer underrun error prevention technology.

Follow these precautions when handling the drive or discs.

•

Please take notice that the manufacturer of this equipment does not offer any warranty
against data loss due to inappropriate installation or handling, or direct or indirect damages.

• Please take notice that the manufacturer will bear no responsibility for direct or indirect

damages caused by the use of this product or its malfunction.

• Please take notice that the manufacturer will bear no responsibility for damage to data

caused by this product.

• Please backup (copy) all important data as a protection against data loss.

• Avoid placing the drive in a location subject to:

- high humidity, high temperature, excessive dust, mechanical vibration, direct sunlight

We recommend using the drive in a horizontal or vertical position. Do not use it in tilted position.

• Don’t move the drive suddenly from a cold place to a warm one or raise the room

temperature suddenly. Condensation may occur, causing abnormal operation.

• Make sure to remove the disc before moving the drive. The disc may become damaged,

causing data loss.

• Be careful to prevent foreign objects, such as liquids or metal, from entering the drive.

In case a foreign object enters the drive, please consult the dealer where the drive was
purchased.

• Don’t interrupt the electric power while the drive is operating.

• When connecting two IDE devices to the Primary or Secondary connectors, make sure

that the two devices are not configured as both Master, or both Slave. If they are both set
the same, Windows may fail to run or recognize the drives.

• The total length of the IDE cable should be no more than 18 inches (about 45 cm).

2

WARNING: Only drives bearing the logo Compact Disc ReWritable Ultra Speed can

write or erase Ultra Speed CD-RW media.
Ultra Speed CD-RW Media may be recognized by the same Compact Disc ReWritable

Ultra Speed logo on the disc label or packaging material.
Attempting to write to Ultra Speed CD-RW media using CD-RW drives NOT bearing the

logo Compact Disc ReWritable Ultra Speed may result in data loss.