LG GN-241RL Manual book

LAMP REPLACEMENT

1. Unplug the power cord from the outlet.

2. Remove refrigerator shelves.

3. To remove the lamp cover, insert a slotted driver at the one of
under hole of the lamp cover and pull it out forwards.

4. Turn the lamp counterclockwise.

5. Assemble in reverse order of disassembly.
Replacement bulb must be the same specification as original.

BEFORE CALLING FOR SERVICE

SERVICE CALLS CAN OFTEN BE AVOIDED!
IF YOU FEEL YOUR REFRIGERATOR IS NOT OPERATING PROPERLY, CHECK THESE POSSIBLE
CAUSES FIRST :

PROBLEM POSSIBLE CAUSES

REFRIGERATOR DOES Has a house fuse blown or circuit breaker tripped?
NOT OPERATE

REFRIGERATOR OR FREEZER
COMPARTMENT TEMPERATURE
TOO WARM

ABNORMAL NOISE(S)

REFRIGERATOR
HAS ODOR or wrapped.

DEW FORMS ON THE
CABINET SURFACE

Has the power cord plug been removed or loosened
from the electrical wall outlet?

Temperature control not set on proper position.
Appliance is placed close to wall or heat source.
Warm weather-frequent door openings.
Door left open for a long time.
Large amount of foods are kept in the refrigerator.

Refrigerator is installed in a weak or uneven place,
or leveling screw needs adjusting.
Unnecessary objects placed behind the refrigerator.

Foods with strong odors should be tightly covered

Interior needs cleaning.

Not unusual during periods of high humidity.
Door may have been left ajar.

REFRIGERATOR

PLEASE READ THIS USER’S GUIDE THOROUGHLY
BEFORE OPERATING AND KEEP IT HANDY FOR
REFERENCE AT ALL TIMES.

P/No. 3828JP8012A

12

P/No. 3828JP8012A

CLEANING

CONTENTS

IMPORTANT WARNINGS ................................. 3

INSTALLATION ................................................. 4

FEATURE CHART ............................................ 5

OPERATION ...................................................... 6

Before Setting The Temperature

Control For Refrigerator

Ice Making

Defrosting
Water Dispenser (Optional)

Modular Door Bin

Vitamin Kit (Optional)

SUGGESTIONS ON FOOD STORAGE .......... 10

CLEANING ...................................................... 11

GENERAL INFORMATION ............................. 11

LAMP REPLACEMENT .................................. 12

BEFORE CALLING FOR SERVICE ............... 12

It is important that your refrigerator be kept clean to
prevent undesirable odors. Spilled food should be
wiped up immediately, since it may acidify and
stain plastic surfaces if allowed to settle.

Never use metallic scouring pads, brushes, coarse
abrasive cleaners, or strong alkaline solutions on
any surface.

Before you clean, remember that damp objects will
stick or adhere to extremely cold surfaces. Do not
touch frozen surfaces with wet or damp hands.

EXTERIOR -Use a lukewarm solution of mild soap
or detergent to clean the durable finish of your
refrigerator. Wipe with a clean, damp cloth and
then dry.

INTERIOR -

interior parts is recommended. If you have the No
Frost model which defrosts automatically, leave
both doors open during the entire cleaning process.
Disconnect the power supply, and remove food and
all compartment shelves, storage trays etc.
Wash all compartments with a baking soda
solution. Rinse and dry.

Regular cleaning of the interior and

GENERAL INFORMATION

VACATION TIME

During average length vacations, you will probably
find it best to leave the refrigerator in operation.
Place freezable items in freezer for longer life.
When you plan to be away for an extended period,
remove all food, disconnect the power cord, clean
the interior thoroughly, and leave each door OPEN
to prevent odor formation.

INTERIOR PARTS - Wash compartment shelves,
door racks, storage trays, and magnetic door seals
etc. with the baking soda solution or a mild
detergent and warm water. Rinse and dry.

WARNING

Always remove power cord from the wall
outlet prior to cleaning in the vicinity of
electrical parts (lamps, switches, controls,
etc.). Wipe up excess moisture with a
sponge or cloth to prevent water or liquid
from getting into any electrical part and
causing a electric shock. Do not use
flammable or toxic cleaning liquids.

IF YOU MOVE

If you move, empty the refrigerator (freezer)
completely and wash a mild solution of baking soda
and water. (2 TBS soda to 1 quart water)
Be sure the soda is completely dissolved to avoid
scratching the inside of the refrigerator (freezer).
Secure any loose items, such as racks, bins, ice
trays, etc. Do not try to move a loaded refrigerator.

POWER FAILURE

Most power failures are corrected in an hour or two
and will not affect your refrigerator temperatures.
However, you should minimize the number of door
openings while the power is off. During power
failures of longer duration, place a block of dry ice
on top of your frozen packages.

DRY ICE WARNING

When using dry ice, provide adequate ventilation.
Dry ice is frozen carbon dioxide (CO
When it vaporizes, it can displace oxygen, causing
dizziness, light-headedness, unconsciousness, and
death by suffocation.
Open a window and do not breathe the vapors.

2

2).

ANTI-CONDENSATION PIPE

The outside wall of the refrigerator cabinet may
sometimes get warm, especially just after
installation.
Don't be alarmed.
This is due to the
anti-condensation pipe,
which pumps hot refrigerant
to prevent sweating on the
outer cabinet wall.

11

Anti-Condensation

Pipe