Network service ................................74
Technical data ...................................74
TROUBLESHOOTING ...........................76
5
Guidelines for safe and efficient use
Please read these simple guidelines.
Not following these guidelines may be
dangerous or illegal.
Exposure to radio frequency
energy
Radio wave exposure and Specific
Absorption Rate (SAR) information
This mobile phone model GD330
has been designed to comply with
applicable safety requirements for
exposure to radio waves. These
requirements are based on scientific
guidelines that include safety margins
designed to assure the safety of
all persons, regardless of age and
health.
• The radio wave exposure
guidelines employ a unit of
measurement known as the
Specific Absorption Rate, or SAR.
Tests for SAR are conducted using
standardised methods with the
phone transmitting at its highest
certified power level in all used
frequency bands.
LG GD330 | User Guide6
• While there may be differences
between the SAR levels of various
LG phone models, they are all
designed to meet the relevant
guidelines for exposure to radio
waves.
• The SAR limit recommended by
the International Commission on
Non-Ionizing Radiation Protection
(ICNIRP) is 2 W/Kg averaged over
10g of tissue.
• The highest SAR value for this
model phone tested by DASY4 for
use at the ear is 0.467 W/Kg (10g)
and when worn on the body is
0.842 W/Kg (10g).
• SAR data information for
residents in countries/regions
that have adopted the SAR limit
recommended by the Institute
of Electrical and Electronics
Engineers (IEEE), which is 1.6 W/
Kg averaged over 1g of tissue.
Product care and maintenance
WARNING
Only use batteries, chargers and
accessories approved for use with this
particular phone model. The use of any
other types may invalidate any approval
or warranty applying to the phone, and
may be dangerous
• Do not disassemble this unit. Take
it to a qualified service technician
when repair work is required.
• Keep away from electrical
appliances such as TVs, radios,
and personal computers.
• The unit should be kept away from
heat sources such as radiators or
cookers.
• Do not drop.
• Do not subject this unit to
mechanical vibration or shock.
• Switch off the phone in any area
where you are required by special
regulations. For example, do not
use your phone in hospitals as
it may affect sensitive medical
equipment.
• Do not handle the phone with wet
hands while it is being charged. It
may cause an electric shock and
can seriously damage your phone.
• Do not to charge a handset near
flammable material as the handset
can become hot and create a fire
hazard.
• Use a dry cloth to clean the
exterior of the unit (do not use
solvents such as benzene, thinner
or alcohol).
• Do not charge the phone when it is
on soft furnishings.
• The phone should be charged in a
well ventilated area.
• Do not subject this unit to
excessive smoke or dust.
7
Guidelines for safe and efficient use
• Do not keep the phone next to
credit cards or transport tickets; it
can affect the information on the
magnetic strips.
• Do not tap the screen with a sharp
object as it may damage the
phone.
• Do not expose the phone to liquid
or moisture.
• Use the accessories like earphones
cautiously. Do not touch the
antenna unnecessarily.
Efficient phone operation
Electronics devices
All mobile phones may get
interference, which could affect
performance.
• Do not use your mobile phone
near medical equipment
without requesting permission.
Avoid placing the phone over
pacemakers, for example, in your
breast pocket.
LG GD330 | User Guide8
• Some hearing aids might be
disturbed by mobile phones.
• Minor interference may affect TVs,
radios, PCs, etc.
Road safety
Check the laws and regulations on
the use of mobile phones in the area
when you drive.
• Do not use a hand-held phone
while driving.
• Give full attention to driving.
• Use a hands-free kit, if available.
• Pull off the road and park before
making or answering a call if
driving conditions so require.
• RF energy may affect some
electronic systems in your vehicle
such as car stereos and safety
equipment.
• When your vehicle is equipped
with an air bag, do not obstruct
with installed or portable wireless
equipment. It can cause the air
bag to fail or cause serious injury
due to improper performance.
• If you are listening to music whilst
out and about, please ensure that
the volume is at a reasonable
level so that you are aware of your
surroundings. This is particularly
imperative when near roads.
Avoid damage to your hearing
Damage to your hearing can occur
if you are exposed to loud sound for
long periods of time. We therefore
recommend that you do not turn on
or off the handset close to your ear.
We also recommend that music and
call volumes are set to a reasonable
level.
Blasting area
Do not use the phone where blasting
is in progress. Observe restrictions,
and follow any regulations or rules.
Potentially explosive
atmospheres
• Do not use the phone at a
refueling point.
•Do not use near fuel or chemicals.
• Do not transport or store
flammable gas, liquid, or explosives
in the same compartment of your
vehicle as your mobile phone and
accessories.
In aircraft
Wireless devices can cause
interference in aircraft.
• Turn your mobile phone off before
boarding any aircraft.
• Do not use it on the ground
without permission from the crew.
Children
Keep the phone in a safe place out of
the reach of small children. It includes
small parts which may cause a
choking hazard if detached.
Emergency calls
Emergency calls may not be available
under all mobile networks. Therefore,
you should never depend solely on
the phone for emergency calls. Check
with your local service provider.
9
Guidelines for safe and efficient use
Battery information and care
• You do not need to completely
discharge the battery before
recharging. Unlike other battery
systems, there is no memory
effect that could compromise the
battery’s performance.
• Use only LG batteries and
chargers. LG chargers are
designed to maximize the battery
life.
• Do not disassemble or short-circuit
the battery pack.
• Keep the metal contacts of the
battery pack clean.
• Replace the battery when it
no longer provides acceptable
performance. The battery pack
maybe recharged hundreds of
times until it needs replacing.
• Recharge the battery if it has
not been used for a long time to
maximize usability.
• Do not expose the battery charger
to direct sunlight or use it in high
humidity, such as in the bathroom.
LG GD330 | User Guide10
• Do not leave the battery in hot or
cold places, this may deteriorate
the battery performance.
• There is risk of explosion if the
battery is replaced by an incorrect
type.
• Dispose of used batteries
according to the manufacturer’s
instructions. Please recycle when
possible. Do not dispose as
household waste.
• If you need to replace the battery,
take it to the nearest authorized LG
Electronics service point or dealer
for assistance.
• Always unplug the charger from
the wall socket after the phone is
fully charged to save unnecessary
power consumption of the charger.
Getting to know your phone
Main LCD
•Top: Signal strength,
battery level and various
functions.
•Bottom: Soft key
indications.
Left soft key/
Right soft key
Performs the function
indicated at the bottom of
the display.
Multitasking key
Opens the multitasking
menu.
Send key
Dials a phone number and
answers incoming calls.
End/Power key
Ends or rejects a call. Turns the phone
on/off. Press once to return to the standby
screen.
ALC (Auto Luminance
Control) Sensor
Automatically adjusts
screen brightness
according to ambient
brightness.
Navigation Keys
• In standby mode:
U Quick menu
D Contacts list
R Messaging
L Profile
• In menu: Navigates
between menus.
Clear key
- When you write
characters: Clears a
character each time it is
pressed.
- When the screen is idle:
Plays music you have
listened to recently.
If the file does not exist
in your phone, the notice
message displays on
your screen.
11
Getting to know your phone
Charger, USB Cable, Handsfree
connector
TIP: To connect the USB
cable, wait until the phone
has powered up and has
registered to the network.
Volume key
•When the screen is idle: volume of
Ring volume.
• During a call: volume of the earpiece.
• When playing a BGM track: Controls
the volume.
SIM card socket
LG GD330 | User Guide12
Camera Hot key
Go to Camera
preview.
Battery cover
Battery
Installing the SIM and battery
1 Remove the battery cover
Press the battery cover release
latch. Slide the battery cover
towards the bottom of the phone
and away from it.
2 Remove the battery
Lever the bottom edge of the
battery and remove it carefully
from the battery compartment.
WARNING: Do not remove the
battery when the phone is switched
on, as this may damage the phone.
3 Install the SIM card
Slide the SIM card into the SIM
card holder. Make sure that the
gold colour contact area on the
card is facing downwards. To
remove the SIM card, pull it gently
in the reverse direction.
WARNING: Do not replace or
remove the SIM card while your
phone is being used or turned on,
or data may be lost or the SIM card
might be damaged.
13
Installing the SIM and battery
4 Install the battery
Insert the top of the battery first
into the top edge of the battery
compartment. Ensure that the
battery contacts align with the
terminals on the phone. Press
down the bottom of the battery
until it clips into place.
5 Replace the battery cover
Slide the battery cover towards
the top of the phone until it clicks
into place.
LG GD330 | User Guide14
6 Charging your phone
Pull open the cover of the charger
socket on the side of your GD330.
Insert the charger and plug into a
main electricity socket.
Your GD330 will need to be
charged until a message reading
“Battery full” appears on screen.
Memory card
Installing a memory card
You can expand the memory available
on your phone using a memory card.
TIP: A memory card is an optional
accessory.
1 Lift the memory card cover and
insert a micro SD card with the
gold colour contact area facing
downwards. Close the memory
card cover so that it clicks shut.
Formatting the memory card
If your memory card is already
formatted, you can begin using
it straight away. If your card isn’t
formatted, you will need to do so.
1 From the standby screen press
O then select Settings.
2 Select Memory manager then
choose External memory.
3 Select Format and then confirm
your choice.
4 Enter the password, if one is set,
and your card will be formatted
and ready to use.
NOTE: The default security code is set
to ‘0000’.
TIP! To change your default
storage destination, open Memory manager from the Settings menu and
select Primary storage setting.
NOTE: If your memory card has
existing content it will automatically
be filed in the correct folder, for
example, videos will be stored in the
My videos folder.
15
Menu map
Games & Apps
1. My games & apps
2. Racing Time2
3. Settings
Organiser
1. Calendar
2. To do
3. Memo
4. Secret memo
5. Date finder
6. Settings
Messaging
1. Create new message
2. Inbox
3. Mailbox
4. Drafts
5. Outbox
6. Sent items
7. My folders
8. Templates
9. Emoticons
0. Settings
LG GD330 | User Guide16
Calling
1. Call logs
2. Call durations
3. Data volume
4. Call costs
5. Call divert
6. Call barring
7. Fixed dial numbers
8. Call waiting
9. Common setting
Multimedia
1. Camera
2. Video camera
3. Music
4. FM radio
5. Voice recorder
My stuff
1. My images
2. My sounds
3. My videos
4. My games & apps
5. Flash contents
6. Others
7. My memory card
8. Internal memory explorer
GoogleContacts
1. Add new
2. Search
3. Speed dials
4. Groups
5. Service dial numbers
6. Own number
7. My business card
8. Settings
Tools
1. Quick menu
2. Alarms
3. Calculator
4. Stopwatch
5. Converter
6. World time
7. SIM service*
* This feature depends on SIM
and the network services.
Connectivity
1. Bluetooth
2. USB connection mode
Browser
1. Home
2. Enter address
3. Bookmarks
4. RSS reader
5. Saved pages
6. History
7. Settings
Settings
1. Profiles
2. Phone
3. Screen
4. Date & Time
5. Network
6. Internet profile
7. Access points
8. Packet data conn.
9. Security
0. Memory manager
*. Reset settings
17
Your standby screen
From here you can access menu
options, make a quick call and
change your profile - as well as many
other things.
Touch pad
The touch pad below the screen
can be used as left/right soft key to
navigate you through your phone
menus.
• There’s no need to press too
hard as the touch pad is sensitive
enough to pick up on a light touch.
• Use the tip of your finger to touch
the option you require. Be careful
not to touch any other keys.
LG GD330 | User Guide18
The status bar
The status bar indicates, using
various icons, things like signal
strength, new messages and battery
life as well as telling you whether
your Bluetooth or GPRS is active.
Below is a table which explains the
meaning of icons you’re likely to see
in the status bar.
Icon Description
Multitasking
Network signal strength
(number of bars will vary)
No network signal
Battery empty
New text message
New email
An alarm is set
Normal profile in use
Silent profile in use
External memory
Calls are diverted
GPRS available
EDGE in use
Roaming
Bluetooth is active
Calls are rejected
BGM Music playing
19
Calls
Making a voice call
1 Enter the number including the full
area code.
To delete a digit press
c.
To delete all digits press and hold
c.
s to make the call.
2 Press
e or close the handset to
3 Press
finish the call.
Making a voice call from
Contacts
It’s easy to call anyone whose
number you have stored in your
Contacts.
1 Press
to access the contacts
D
list from the standby screen.
2 Select the contact to make a call.
s to make a voice call.
3 Press
e to finish the call.
4 Press
LG GD330 | User Guide20
Making international calls
1 Press and hold 0 for the
international prefix. The ‘+’
character prefixes the international
access code.
2 Enter the country code, area code,
and the phone number.
s.
3 Press
Answering and rejecting a call
When your phone rings press the
s to answer the call.
Touch Silent to mute the ringing.
This is great if you’ve forgotten to
change your profile to Silent for a
meeting!
e to reject the incoming call.
Press
Speed dialling
You can assign a frequently-called
contact to a speed dial number.
1 From the standby screen, press
O and select Contacts.
2 Select Speed dials.
3 Your Voicemail is set to speed dial
1. Select any other number to
assign it to a speed dial contact.
4 Your address book will open. Select
the contact you’d like to assign to
that number.
To call a speed dial number:
•
Press the assigned number then
s or O.
press
•
Press and hold the assigned
number until the contact appears
on screen.
Making a second call
1 During your initial call, press
O, then Options, and select Add
new call.
2 Dial the number or search your
contacts.
s to connect the call.
3 Press
4 Both calls will be displayed on the
call screen. Your initial call will be
locked and the caller put on hold.
5 Select Swap to change between
the calls.
6 To end one or both calls select
Options then End followed by All or Active.
NOTE: You will be charged for each
call you make.
21
Calls
Viewing your call logs
From the standby screen, press O
and select Calling then Call logs.
Choose to view:
All calls - View a complete list of all
of your dialled, received and missed
calls.
Dialled calls - View a list of all the
numbers you have called.
Received calls - View a list of all the
numbers that you have received.
Missed calls - View a list of all the
calls you have missed.
TIP! From any calls list, touch
the left soft key and select Delete all
to delete all the recorded items.
From the standby screen, press O
and select Calling.
LG GD330 | User Guide22
You can also choose to view:
Call durations - View the duration of
all your dialled and received calls.
Data volume - View the amount in
kilobytes of all your received and
sent data.
Call costs - View the charges
applied to your dialled numbers (this
service is network-dependant. Some
operators are unable to support it).
Using call divert
1 From the standby screen, press
and then select Calling.
O
2 Select Call divert.
3 Choose when to divert all calls;
when the line is busy, when there
is no answer or when you are not
reachable.
4 Input the number you’d like to
divert to.
5 Select Divert.
NOTE: Charges may be incurred for
diverting calls. Please contact your
network provider for details.
TIP! To turn off all call diverts,
choose Deactivate all.
Using call barring
1 From the standby screen, press
and select Calling.
O
2 Select Call barring.
3 Choose any or all of the options:
All outgoing
Outgoing international
Outgoing international calls
except home country
All incoming
Incoming when abroad
Deactivate all
4 Enter the call barring password.
Please check with your network
operator for this service.
Using fixed dial number
1 From the standby screen, press
and select Calling.
O
2 Select Fixed dial numbers to
turn on and compile a list of
numbers that can be called from
your phone. You’ll need your PIN2
code from your operator. When
activated, only numbers included
in the fixed dial list can be called
from your phone.
Using call waiting
1 From the standby screen, press
and select Calling.
O
2 Select Call waiting to activate call
waiting service.
If call waiting is activated, the
handset is also able to warn you
of an incoming call while you are
already on a call. A tone sounds in
the earpiece, and the display will
show that a second call is waiting.
23
Calls
You can put the first call on hold and
answer the second call. (This feature
is only available if your network
supports it. )
Changing the common call
settings
1 From the standby screen, press
O and then select Calling.
2 Select Common setting. From
here you can amend the settings
for:
Call reject - Select On or Off and
choose to reject all calls, those
from specific groups, contacts,
unregistered numbers (those not in
your list of contacts) or those with
no caller ID.
Send my number - Choose
whether your number will be
displayed when you call someone.
(This feature is only available if your
network supports it.)
LG GD330 | User Guide24
Auto redial - Choose On or Off.
Answer mode - Choose whether to
answer the phone by pressing the
send key, by pressing any key, or
by opening the flip.
Minute minder - Select On to hear
a tone every minute during a call.
BT answer mode - Choose how
to answer a call when using a
Bluetooth headset. Select Hands-
free or handset.
Save new number - Saves
numbers you use that aren’t
already stored in Contacts.
Slide close setting - Set whether
or not a call is ended upon closing
the slide.
Contacts
Searching for a contact
There are two ways to search for a
contact:
From the standby screen
1 From the standby screen, press
to open the address book.
D
2 Press the number key
corresponding to the first letter of
the contact you’d like to view. So,
for ‘Home’ press 4 (GHI) twice.
Or, using the slightly quicker
method…
1 Enter the number you wish to
search on the standby screen and
select Options.
2 Choose Search contacts in option
menu.
TIP! You can search by group by
Touching Options and selecting
Search by, and then selecting Group.
This will bring up a list of all your
groups.
From the main menu
1 From the standby screen, press
O and select Contacts.
2 Select Search and enter the first
few letters of the contact you’d like
to find using the keypad.
3 Your address book will bring up a
list of the contacts corresponding
to the letters you’ve entered.
Adding a new contact
1 From the standby screen, press
O and select Contacts.
2 Select Add new.
3 Choose whether to save the
contact to your Handset or SIM.
4 Enter the first and last name of
your new contact.
5 Enter all the information you have
in the fields provided and select
Done.
25
Contacts
Or, using the slightly quicker
method…
1 Enter the number you wish to store
on the standby screen and select
Options.
2 Select Save number and choose
New contact or Update contact.
3 Enter the relevant information as
above and select Done.
Contact options
There are many things you can do
when viewing a contact. Here’s how
to access and use the options menu:
1 Open the contact you’d like to use.
2 Touch the left soft key to open the
list of options.
From here you can:
Send message - Send a message
or an email to the contact.
LG GD330 | User Guide26
Send business card - Send the
contact’s details to another person
as a business card. Choose to send
as a Text message, Multimedia
msg, Email or via Bluetooth.
Make call - Call the contact.
Add new contact - You can add a
new contact.
Edit - You can edit the contact.
Add to group - Add a contact to
a group.
Mark/Unmark - Mark/unmark your
contacts for multiple selection.
Search by - You can search the
entry by number or group.
Save to SIM/ Handset - Choose
to move or copy to the SIM card or
handset (depending on where you
originally saved the contact).
Delete - Delete the contact.
Text input - You can set the text
input method.
Speed dials - You can assign this
contact to a speed dial number
Creating a group
1 From the standby screen, press
O and select Contacts.
2 Select Groups and choose
Options.
3 Select Add new group.
4 Enter a name for your new group.
5 Touch Done.
NOTE: If you delete a group, the
contacts which were assigned to
that group will not be lost. They will
remain in your address book.
TIP! You can edit an existing group by
highlighting it and selecting Options.
Choose to Add a member to the
group from your contacts, assign a
Group ringtone, Rename the group or
Delete the group.
Using service dial numbers
You can view the list of Service Dial
Numbers (SDN) assigned by your
service provider (if supported by the
SIM card). Such numbers include
emergency, directory enquiries and
voicemail numbers. After selecting
a service number, press
s to dial
that service.
Viewing your own number
Select Own number in the Contacts
menu to view your number.
Creating a business card
You can create your own business
card by selecting My business card,
then Add. Enter your name, number,
email address and image.
27
Contacts
Changing your contact settings
You can adapt your contact settings
so that your address book works
according to your preferences.
1 From the standby screen, press
O and select Contacts.
2 Select Settings. From here you
can adjust the following settings:
Contact list settings - Choose
whether to view contacts saved
to both your Handset and SIM, Handset only or SIM only. You can
also select to show the first name
or last name of a contact first, and
to show a contact picture.
Copy - Copy your contacts from
your SIM to your handset or from
your handset to your SIM. Choose
to do this one by one, or all
together.
LG GD330 | User Guide28
Move - This works in the same
way as Copy, but the contact will
only be saved to the location you’ve
moved it to. If you move a contact
from the SIM to the handset it will
be deleted from the SIM memory.
Send all contacts via Bluetooth Send all contacts information to
another handset by Bluetooth.
Back up contacts - You can save
all the phonebook data in the
handset to an external memory
card by the form of vcard.
Restore contacts - You can restore
all the phonebook data in an
external memory card to the phone
memory by the form of vcard.
Clear contacts - Delete all your
contacts.
Memory info. - You can check how
much memory you’ve got left on
your handset or your SIM.
Loading...
+ 132 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.