Page 1
- 45 -
5. DOWNLOAD
5. DOWNLOAD
5.1 Download Setup
5.1.1 Download Equipment
1) Data Kit
2) Desktop or Notebook PC
3) Download Monitor Program
4) The phones mobile phone
+-
Page 2
5.2 Download Procedure
5.2.1 General Purpose
This document gives a guideline for upgrading software of the phones using UART port.
5.2.2 Download Environment
In order to download software of the phones, the following working environments should be
prepared: the phones Data Link Kit, DK-10G that is connected to COM1 or COM2 serial port in the
Desktop or Notebook PC.
The phones Data Kit Download Monitor Program that is copied to Desktop PC or Notebook PC.
Target SW* downloaded to the phones mobile phone.
Note : Target SW* means any necessary software to be downloaded to the mobile phone.
- 46 -
Warning
You must use the Data Link Kit(DK-10G) and UART Download Monitor program that are provided
from LGE. Otherwise downloading process won’t properly
5. DOWNLOAD
Page 3
5. DOWNLOAD
- 47 -
5.2.3 Download Procedure
A. Unzip the phones UART Download monitor program(monitor 663.zip) in PC.
B. Execute monitor663.exe. And then select the “Target” Menu shown in Figure 5-1. Then, choose
“Connect” in the Target Menu.
Figure 5-1.
C. A table will be displayed as shown in Figure 5-2. Then press the arrow-button and choose a
correct serial port. And press “OK” button.
Figure 5-2.
Page 4
- 48 -
5. DOWNLOAD
D. As the following window shown in Figure 5-3. is displayed, connect the phones Phone to Data
Link Kit, DK-10G and power on the phones. If the connection is succeeded, the following screen
will show the contents as shown in Figure 5-4.
Figure 5-3.
Figure 5-4.
Page 5
5. DOWNLOAD
- 49 -
E. Click on “Flash” on the top menu and select “Get type” item as shown in Figure 5-4. and select
“Erase and Program Appli Only+Boot” item as shown in Figure 5-5.
Figure 5-5.
F. Finally choose the target SW that you want to download. And then you can see the following
window in Figure 5-6.
Figure 5-6.
Page 6
5. DOWNLOAD
- 50 -
G. If the downloading procedure is succeeded, then the following window is shown.
Figure 5-7.
Loading...