Page 1
- 45 -
5. DOWNLOAD
5. DOWNLOAD
5.1 Download Setup
5.1.1 Download Equipment
1) Data Kit
2) Desktop or Notebook PC
3) Download Monitor Program
4) G7000/W7000 mobile phone
+-
Page 2
5.2 Download Procedure
5.2.1 General Purpose
This document gives a guideline for upgrading software of G7000/W7000 using UART port.
5.2.2 Download Environment
In order to download software of G7000/W7000, the following working environments should be
prepared: G7000/W7000 Data Link Kit, DK-10G that is connected to COM1 or COM2 serial port in
the Desktop or Notebook PC.
G7000/W7000 Data Kit Download Monitor Program that is copied to Desktop PC or Notebook PC.
Target SW* downloaded to G7000/W7000 mobile phone.
Note : Target SW* means any necessary software to be downloaded to the mobile phone.
- 46 -
Warning
You must use the Data Link Kit(DK-10G) and UART Download Monitor program that are provided
from LGE. Otherwise downloading process won’t properly
5. DOWNLOAD
Page 3
5. DOWNLOAD
- 47 -
5.2.3 Download Procedure
A. Unzip G7000/W7000 UART Download monitor program(monitor 663.zip) in PC.
B. Execute monitor663.exe. And then select the “Target” Menu shown in Figure 5-1. Then, choose
“Connect” in the Target Menu.
Figure 5-1.
C. A table will be displayed as shown in Figure 5-2. Then press the arrow-button and choose a
correct serial port. And press “OK” button.
Figure 5-2.
Page 4
- 48 -
5. DOWNLOAD
D. As the following window shown in Figure 5-3. is displayed, connect G7000/W7000 Phone to
Data Link Kit, DK-10G and power on G7000/W7000. If the connection is succeeded, the
following screen will show the contents as shown in Figure 5-4.
Figure 5-3.
Figure 5-4.
Page 5
5. DOWNLOAD
- 49 -
E. Click on “Flash” on the top menu and select “Get type” item as shown in Figure 5-4. and select
“Erase and Program Appli Only+Boot” item as shown in Figure 5-5.
Figure 5-5.
F. Finally choose the target SW that you want to download. And then you can see the following
window in Figure 5-6.
Figure 5-6.
Page 6
5. DOWNLOAD
- 50 -
G. If the downloading procedure is succeeded, then the following window is shown.
Figure 5-7.
Loading...