LG FH0C8CDSK73 Owner’s Manual
MFL69283926
RELEASING THIS DRAWING WITHOUT PERMISSION LG Electronics SHOULD BE ACCUSED ACCORDING TO THE LAWS AND COMPANY RULES.
LG .
SEC. |
|
|
|
PRINTINGDEGREE |
MATERIALANDPRINTINGDESCRIPTION |
LGMODEL |
SUFFIX |
LANGUAGE |
PAGE |
REMARK |
|
WORK |
BRAND |
MODEL |
P/NO. |
||||||||
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
26 |
LG |
FH0C8CDSK73 |
MFL69283926 |
1 |
SNOWWHITE80gOFFSET |
FH0C8CDSK73 |
A**PEIL |
ENGLISH |
48 |
TT-PJT |
|
: |
|||||||||||
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
: |
|
|
|
|
|
|
|
|
|
|
|
|
<< >>
| <![if ! IE]> <![endif]>257 |
<![if ! IE]> <![endif]>210 |
|
|
| <![if ! IE]> <![endif]>1 |
|
|
|
|
|
|
|
<FRONT> |
<BACK> |
P/NO.
|
|
1 |
182 |
|
1 |
182 |
|
|
|
|
|||||
|
|
|
150 |
|
|
150 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1., , , .
2., , FILM .
3..
4..
5., LG(63)-A-5501-34
<<NOTES >>
1.Material, printing and exterier size are refer to work tables.
2.Printing, text size and line are based on LG design film.
3.Exterier size on the drawing is cutting line.
4.Before product controlled by criteria sample.
5.The part should not contain prohibited substances(Pb,Cd,Hg,Cr+6,PBB,PBDE) and details should comply with LG standard of LG(63)-A-5501-34
|
|
|
|
|
|
|
|
|
|
|
|
|
DR COMPLETED |
|
|
|
|
|
|
|
|
|
|
|
|
DR |
|
|
|
|
|
|
|
|
|
|
mm SCALE N S |
|
ILLUSTRATOR |
: 16.01.28 |
|
|
|
|
|
|
|
TRIG. |
|
UNIT |
T |
MANUAL,OWNER’S |
|||
1 |
|
EAGG200556 |
2016/02/16 |
|
|
MODELING DESIGNED |
REVIEWED |
CHECKED |
APPROVED |
TI |
|||
2 |
|
EAGG300223 |
2016/03/08 |
|
|
|
|
|
|
|
L |
DRUM-EXPORT1/1 |
|
3 |
|
EAGG500041 |
2016/05/02 |
|
|
16.01.29 |
16.01.29 |
16.01.29 |
16.02.01 |
E |
|||
4 |
|
|
|
|
|
LG |
( ) |
RELATED DWG. |
No.DWG. |
MFL69283926 |
|||
5 |
|
|
|
|
|
||||||||
|
|
|
|
|
LG Electronics Inc. |
|
|
||||||
REV. NO. |
REVISION DESCRIPTION |
REF. NO. |
DATE |
PREPARED APPROVED |
|
|
|
|
|
||||
|
|
|
/ / |
|
|
|
|
|
|
|
|
|
|
<![endif]>ENGLISH
OWNER’S MANUAL
WASHING
MACHINE
Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the product is installed correctly and safely. Leave these instructions near the product after installation for future reference.
FH0C8CDSK73
MFL69283926 |
www.lg.com |
TABLE OF CONTENTS
This manual is produced for a group of products and may contain images or content different from the model you purchased.
This manual is subject to revision by the manufacturer.
SAFETY INSTRUCTIONS....................................... |
03 |
Important Safety Instructions............................................................... |
06 |
INSTALLATION....................................................... |
09 |
Specifications....................................................................................... |
09 |
Accessories.......................................................................................... |
09 |
Installation Place Requirements........................................................... |
10 |
Unpacking and Removing Transit Bolts............................................... |
11 |
Using Non-Skid Pads (Optional).......................................................... |
12 |
Wooden Floors (Suspended Floors).................................................... |
12 |
Leveling the Washing Machine............................................................ |
13 |
Connecting Inlet Hose.......................................................................... |
13 |
Installation of Drain Hose..................................................................... |
16 |
OPERATION............................................................ |
17 |
Using the Washing Machine................................................................ |
17 |
Sorting Iaundry..................................................................................... |
18 |
Adding Cleaning Products.................................................................... |
19 |
Control Panel....................................................................................... |
21 |
Program Table...................................................................................... |
22 |
Option Cycle......................................................................................... |
25 |
Using Smart Function (Optional).......................................................... |
29 |
MAINTENANCE....................................................... |
30 |
Cleaning your Washing Machine......................................................... |
30 |
Cleaning the Water Inlet Filter.............................................................. |
30 |
Cleaning the Drain Pump Filter............................................................ |
31 |
Cleaning the Dispenser........................................................................ |
31 |
Tub Clean (Optional)............................................................................ |
32 |
Caution on Freezing During Winter...................................................... |
33 |
Using the Smart Diagnosis™ Function ............................................... |
35 |
TROUBLESHOOTING............................................. |
36 |
Diagnosing Problems........................................................................... |
36 |
Error Messages.................................................................................... |
38 |
WARRANTY |
............................................................40 |
SAFETY INSTRUCTIONS
The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the product.
The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described below.
This symbol is displayed to the indicate matters and operations that can cause risk. Read the part with this symbol carefully and follow the instructions in order to avoid risk.
WARNING - This indicates that the failure to follow the instructions can cause serious injury or death.
CAUTION - This indicates that the failure to follow the instructions can cause the minor injury or damage the product.
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using your product, basic safety precautions should be followed, including the following.
CHILDREN IN THE HOUSEHOLD
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
For use in Europe:
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Children of less than 3 years should be kept away unless continuously supervised.
<![endif]>ENGLISH
03
GROUNDING REQUIREMENTS
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire, explosion, or electric shock, or to prevent property damage, injury to persons, or death.
••This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.
••This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
••Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the appliance is properly grounded.
••Do not modify the plug provided with the appliance. If it does not fit the outlet, have a proper outlet installed by a qualified electrician.
04
DISPOSAL OF YOUR OLD APPLIANCE (AS PER E-WASTE RULES)
1.When this crossed out wheeled bin symbol is depicted on the product and its operator’s manual, it means the product is covered by the e-waste Management and Handling Rules , 2011 and are meant to be recycled, dismantled, refurbished or disposed off.
2.Dos:
a.The product is required to be handed over only to the authorized recycler for disposal.
b.Keep the product in isolated area, after it becomes non-functional/ unrepairable so as to prevent its accidental breakage.
Don’t:
a.The product should not be opened by the user himself/herself, but only by authorized service personnel.
b.The product is not meant for re-sale to any unauthorized agencies/scrap dealer/kabariwalah.
c.The product is not meant for mixing into household waste stream.
d.Do not keep any replaced spare part(s) from the product in exposed area.
3.Any disposal through unauthorized agencies/person will attract action under Environment (Protection) Act 1986.
4.This product is complied with the requirement of Hazardous Substances as specified under Rule 13 (1) & (2) of the E-Waste (Management & Handling)
Rules, 2011.
5.To locate a nearest collection centre or call for pick-up (limited area only) for disposal of this appliance, please contact Toll Free No. 1800-315-9999 / 1800-180-9999 for details. All collection centre and pick up facilities are done by third parties with LG Electronics India Pvt. Ltd. Merely as a facilitator. For more detailed information , please visit : http://www.lg.com/in.
<![endif]>ENGLISH
05
Important Safety Instructions
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using your product, basic safety precautions should be followed, including the following.
Installation |
Operation |
••Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled, or has missing or broken parts, including a damaged cord or plug. It can cause electric shock or injury.
••This appliance is heavy. Two or more people may be needed to install and move the appliance. Failure to do so can result in injury.
••Store and install this appliance where it will not be exposed to temperatures below freezing or exposed to outdoor
weather conditions. Failure to do so can result in leakage.
••Tighten the drain hose to avoid separation. Splashing of water may cause electric shock.
••If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard.
••The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the tumble dryer, in such a way that a full opening of the tumble dryer door is restricted.
••Do not use a sharp object like drill or pin to press or separate an operation unit. It can cause the electric shock or injury.
••Only an authorized repair person from LG Electronics service centre should disassemble, repair, or modify the product. Improper service may cause injury, electric shock or fire.
••Do not spray the water inside or outside the product to clean it. Water can damage the insulation, causing electric shock or fire.
••Keep the area underneath and around your appliances free of combustible materials such as lint, paper, rags, chemicals, etc. Improper use can cause fire or explosion.
••Do not put living animals, such as pets into the product. It may cause injury.
••Do not leave this appliance door open. Children may hang on the door or crawl inside the appliance, causing damage or injury.
06
••Never reach into this appliance while it is operating. Wait until the drum has completely stopped. Failure to do so may result in injury.
••Do not put in, wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with combustible or explosive substances (such as wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene,
vegetable oil, cooking oil, etc.). Improper use can cause fire or explosion.
••In case of flood, stop using the product and contact the LG Electronics service centre. Contact with water can cause electric shock.
••Do not push down the door excessively, when the appliance door is open. Doing so may topple over the appliance and it can cause the injury.
••Use new hose-sets supplied with the appliance. Old hose-sets should not be reused. Water leakage may cause property damage.
••Do not touch the door during steam cycles, drying or high-temperature washing. The door surface can become very hot. Allow the door lock to release before opening the door. Failure to do so may result in injury.
••Do not use inflammable gas and combustible substances (benzene, gasoline, thinner, petroleum, alcohol, etc.) around the product. It may cause explosion or fire.
••If the drain hose or inlet hose is frozen during winter, use it only after thawing.
Freezing may cause fire or electric shock, and frozen parts may cause product malfunction or reduction in product life span.
••Keep all washing detergents, softener and bleach away from children. These products contain poisonous materials.
••Do not plug multiple products into multiple socket-outlets or extension cords. This can cause fire.
••Remove the power plug when you clean the product. Not removing the plug may result in electric shock or injury.
••Do not touch the power plug with wet hands. It can cause the electric shock or injury.
••When pulling out the power plug from an outlet, hold the power plug, not the cable. Damage of the cable can cause the electric shock or injury.
••Do not bend the power cable excessively or place a heavy object on top of it. Damage of the power cable can cause electric shock or fire.
<![endif]>ENGLISH
07
Technical Safety for Using the Tumble Dryer
••Do not dry unwashed items in the appliance.
••Items that have been soiled with substances such as cooking oil, vegetable oil, acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot water with an extra amount of detergent before being dried in the appliance.
••Fabric softeners or other similar products should be used according to the fabric softener instructions.
••Remove all objects from pockets such as lighters and matches.
••Never stop this appliance before the end of the drying cycle unless all items are quickly removed and spread out so that the heat is dissipated.
••This appliance is not to be used if industrial chemicals have been used for cleaning.
••Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in this appliance.
Disposal
••Before discarding an old appliance, unplug it. Render the plug useless. Cut off the cable directly behind the appliance to prevent misuse.
••Dispose of the packaging material (such as vinyl and styrofoam) away from children. The packaging material can suffocate a child.
••Remove the door to the washing compartment before this appliance is removed from service or discarded to avoid the danger of children or small animals getting trapped inside. Failure to do so can result in serious injury to persons or death.
08
INSTALLATION
Specifications
|
Transit bolts |
|
Power plug |
|
Detergent |
|
dispenser |
|
Control panel |
|
Drum |
|
Door |
|
Drain hose |
|
Drain plug |
|
Drain pump filter |
|
Cover cap |
|
(Location may |
|
vary depending on |
|
products) |
|
Adjustable feet |
••Power supply |
: 220 V~, 50 Hz |
••Size |
: 700 mm (W) x 835 mm (D) x 990 mm (H) |
••Product weight |
: 100 kg |
••Wash Capacity |
: 21 kg |
••Max. Watt |
: 2200 W |
••Permissible water pressure : 0.1 - 1.0 MPa (1.0 - 10.0 kgf / cm2)
••Appearance and specifications may vary without notice to improve the quality of the product.
Accessories
Inlet hose (1EA) |
Spanner |
Elbow Bracket |
Anti–slip sheets |
Caps for covering |
Tie strap |
(Option : Hot |
|
(for securing drain |
(2EA) |
transit bolt holes |
|
(1EA)) |
|
hose) |
|
|
|
<![endif]>ENGLISH
09
Installation Place Requirements
Location
59.4 cm |
80.2 cm |
|
10 cm 2.5 cm |
|
|
|
|
|
2.5 cm |
|||
|
|
|
|
|
|
|
|
|
|
|
|
139.6 cm
Level floor : Allowable slope under the entire washing machine is 1°.
Power outlet : Must be within 1.5 meters of either side of the location of the washing machine.
•• Do not overload the outlet with more than one appliance.
Additional Clearance : For the wall, 10 cm: rear
/2.5 cm: right & left side
•• Do not place or store laundry products on top of the washing machine at any time.
•• These products may damage the finish or controls.
Positioning
•• Install the washing machine on a flat hard floor.
•• Make sure that air circulation around the washing machine is not impeded by carpets, rugs, etc.
•• Never try to correct any unevenness in the floor with pieces of wood, cardboard or similar materials under the washing machine.
•• If it is impossible to avoid positioning the washing machine next to a gas cooker or coal burning insulation (85x60 cm) covered with aluminum foil on the side facing the cooker or stove must be inserted between the two appliances.
•• Do not install your washing machine in rooms where freezing temperatures may occur. Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point.
•• Please ensure that when the washing machine is installed, it is easily accessible for an engineer in the event of a breakdown.
•• With the washing machine installed, adjust all four feet using the transit bolt spanner provided to ensure the appliance is stable, and a clearance of approximately 20 mm is left between the top of the washing machine and the underside of any work-top.
•• This equipment is not designed for maritime use or for use in mobile installations such as caravans, aircraft etc.
Electrical Connection
•• Do not use an extension cord or double adapter.
•• Always unplug the washing machine and turn off the water supply after use.
•• Connect the washing machine to an earthed socket in accordance with current wiring regulations.
•• The washing machine must be positioned so that the plug is easily accessible.
•• Repairs to the washing machine must only be carried out by qualified personnel. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local service centre.
•• If the washing machine is delivered in winter and temperatures are below freezing, place the washing machine at room temperature for a few hours before putting it into operation.
10
Unpacking and Removing Transit Bolts
1 Lift the washing machine off the foam base.
•• After removing the carton and shipping material, lift the washing machine off the foam base. Make sure the tub support comes off with the base and is not stuck to the bottom of the washing machine.
•• If you must lay the washing machine down to remove the carton base, always protect the side of the washing machine and lay it carefully on its side. DO NOT lay the washing machine on its front or back.
Tub Support |
Carton base |
(Optional) |
|
2 Remove the bolt assemblies.
•• Starting with the bottom two transit bolts, use the spanner (included) to fully loosen all transit bolts by turning them counterclockwise. Remove the bolt assemblies by wiggling them slightly while pulling them out.
Retainer
Transit
bolt
3 Install the hole caps.
•• Locate the hole caps included in the accessory pack and install them in the transit bolt holes.
Cap
NOTE
•• Save the bolt assemblies for future use. To prevent damage to internal components, DO NOT transport the washing machine without reinstalling the transit bolts.
•• Failure to remove transit bolts and retainers may cause severe vibration and noise, which can lead to permanent damage to the washing machine.
The cord is secured to the back of the washing machine with a transit bolt to help prevent operation with transit bolts in place.
<![endif]>ENGLISH
11
Using Non-Skid Pads (Optional)
If you install the washing machine on a slippery surface, it may move because of excessive vibration. Incorrect leveling may cause malfunction through noise and vibration. If this occurs, install the non-skid pads under the leveling feet and adjust the level.
1 |
Clean the floor to attach the non-skid pads. |
|
•• Use a dry rag to remove and clean foreign |
|
objects and moisture. If moisture remains, the |
|
non-skid pads may slip. |
2 |
Adjust the level after placing the washing machine |
|
in the installation area. |
3 |
Place the adhesive side of the non-skid pad on the |
|
floor. |
•• It is most effective to install the non-skid pads under the front legs. If it is difficult to place the pads under the front legs, place them under the back legs.
This side up
Adhesive side
4 Ensure the washing machine is level.
•• Push or rock the top edges of the washing machine gently to make sure that the washing machine does not rock. If the washing machine rocks, level the washing machine again.
Wooden Floors (Suspended
Floors)
•• Wooden floors are particularly susceptible to vibration.
•• To prevent vibration we recommend you place rubber cups at least 15 mm thick of the each foot of the washing machine, secured to at least two floor beams with screws.
Rubber Cup
•• If possible install the washing machine in one of the corners of the room, where the floor is more stable.
•• Fit the rubber cups to reduce vibration.
•• You can obtain rubber cups (p/no.4620ER4002B) from the LG Service Centre.
NOTE
•• Proper placement and leveling of the washing machine will ensure long, regular, and reliable operation.
•• The washing machine must be 100% horizontal and stand firmly in position.
•• It must not ‘Seesaw’ across corners under the load.
•• The installation surface must be clean, free from floor wax and other lubricant coatings.
•• Do not let the feet of the washing machine get wet. Failure to do so may cause vibration or noise.
12
Leveling the Washing Machine
If the floor is uneven, turn the adjustable feet as required
(Do not insert pieces of wood etc. under the feet). Make sure that all four feet are stable and resting on the floor and then check that the appliance is perfectly level (Use a spirit level).
•• Once the washing machine is level, tighten the lock nuts up towards the base of the washing machine. All lock nuts must be tightened.
Raise |
Lower |
Lock Nut 
Tighten all 4 locknuts securely
•• Diagonal Check
When pushing down the edges of the washing machine top plate diagonally, the washing machine should not move up and down at all (Check both directions). If the washing machine rocks when pushing the machine top plate diagonally, adjust the feet again.
NOTE
•• Timber or suspended type flooring may contribute to excessive vibration and unbalance.
•• If the washing machine is installed on a raised platform, it must be securely fastened in order to eliminate the risk of falling off.
Connecting Inlet Hose |
<![if ! IE]> <![endif]>ENGLISH |
|
•• Water supply pressure must be between 0.1 MPa and
1.0 MPa (1.0‒10.0 kgf/cm2).
•• Do not strip or crossthread when connecting inlet hose to the valve.
•• If the water supply pressure is more than 1.0 MPa, a decompression device should be installed.
•• Periodically check the condition of the hose and replace the hose if necessary.
Checking Rubber Seal Inlet Hose
Two rubber seals are supplied with the water inlet hoses. They are used for preventing water leaks. Make sure the connection to taps is sufficiently tight.
Hose connector
Rubber seal 
Hose connector
Rubber seal 
13
Connecting Hose to Water Tap
Connecting screw-type hose to tap with thread
Screw the hose connector onto the water supply tap.
Connecting screw-type hose to tap without thread
1 Loose the four fixing screws.
Upper |
|
|
|
|
|
|
|
Rubber |
|
|
|
|
|
|
|
seal |
|
connector |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fixing screw
2 Remove the guide plate if the tap is too large to fit the adapter.
Guide plate 
3 Push the adapter onto the end of the tap so that the rubber seal forms a watertight connection.
Tighten the four fixing screws.
4 Push the inlet hose vertically upwards so that the rubber seal within the hose can adhere completely to the tap and then tighten it by screwing it to the right.
Plate
Inlet hose
Connecting one touch type hose to tap without thread
1 Unscrew the adapter ring plate and loose the four fixing screws.
Ring plate
2 Remove the guide plate if the tap is too large to fit the adapter.
Guide plate 
14
Loading...