LG FH0C7FD3, FH0C7FD4, FH0C7FD7 Owner's Manual
OWNER’S MANUAL
COMMERCIAL WASHER
MODEL
FH0C7FD3/ FH0C7FD4/ FH0C7FD7
www.lg.com
MFL67658536
Before beginning installation, read these instructions carefully.
This will simplify installation and ensure that the washer is
installed correctly and safely. Leave these instructions near the
washer after installation for future reference.
2
PRODUCT FEATURES
PRODUCT FEATURES
DIRECT DRIVE SYSTEM
The advanced brushless DC motor drives the drum directly without using a belt and pulley.
TILTED DRUM AND EXTRA LARGE DOOR OPENING
The tilted drum and extra large opening make it possible to load and unload clothing more easily.
ULTRA CAPACITY
The larger drum enables more tumbling action and greater centrifugal force, but also less tangling
and wrinkling of the laundry. Heavier loads, such as king size comforters, blankets, and curtains can
be washed.
SEE-THROUGH DOOR AND BIG DOOR
You can see the laundry throughout the cycle.
MAGNETIC DOOR PLUNGER
Safely and conveniently secure the door slightly ajar with the magnetic door plunger. This will
promote air circulation and allow the interior of the machine to dry. To use this feature, after the load
has been removed, do not close the door completely. When the magnetic door plunger comes into
contact with the metal washer cabinet, it will secure the door slightly open allowing the interior of
the washer to dry.
STAINLESS STEEL DRUM
Stainless steel drum offers extreme durability.
TUB CLEAN
Regular cleaning of the tub on a monthly basis using TUB CLEAN can help keep the tub clean and
fresh.
3
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire or
explosion, electric shock, or to prevent property damage, injury to persons, or death.
Your Safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always
read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word DANGER, WARNING
or CAUTION. These words mean:
DANGER
You will be killed or seriously injured if you don’t immediately follow instructions.
WARNING
You can be killed or seriously injured if you don’t follow instructions.
CAUTION
You may be slightly injured or cause damage to the product if you do not follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of
injury, and tell you what can happen if the instructions are not followed.
1. This crossed-out wheeled bin symbol indicates that waste electrical
and electronic products (WEEE) should be disposed of separately from
the municipal waste stream.
2. Old electrical products can contain hazardous substances so correct
disposal of your old appliance will help prevent potential negative
consequences for the environment and human health.
Your old appliance may contain reusable parts that could be used to
repair other products, and other valuable materials that can be recycled
to conserve limited resources.
3. You can take your appliance either to the shop where you purchased
the product, or contact your local government waste office for details
of your nearest authorised WEEE collection point. For the most up to
date information for your country please see www.lg.com/global/
recycling
Disposal of your old appliance
4
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion,
electric shock, or to prevent property damage, injury to persons, or death.
BASIC SAFETY PRECAUTIONS
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic
precautions, including the following.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
• Do not use an adapter or extension cord.
• Do not remove ground prong.
• If you don’t have the proper outlet, consult an electrician.
WARNING
Improper connection of the equipment-grounding conductor can result in risk of electric shock. Consult a
qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do
not modify the plug provided with the appliance - if it does not fit the outlet, have a proper outlet installed
by a qualified electrician.
•
Read all instructions before using the washer.
•
Do not wash articles that have been previously
cleaned in, washed in, soaked in, or spotted with
gasoline, dry cleaning solvents, or other flammable
or explosive substances, as they give off vapors
that could ignite or explode.
•
Do not add gasoline, dry cleaning solvents, or other
flammable or explosive substances to the wash
water.
These substances give off vapors that could ignite
or explode.
•
Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been
used for 2 weeks or more. HYDROGEN GAS IS
EXPLOSIVE. If the hot water system has not been
used for such a period, before using the washing
machine, turn on all hot water faucets and let the
water flow from each for several minutes. This will
release any accumulated hydrogen gas. As the gas
is flammable, do not smoke or use an open flame
during this time.
•
Do not allow children to play on or in the washer.
Close supervision of children is necessary when the
washer is used near children.
•
Before the washer is removed from service or
discarded, remove the door to prevent children
from hiding inside.
• Do not install or store the washer where it will be
exposed to the weather.
• Do not tamper with the controls.
• Do not repair or replace any part of the washer
or attempt any servicing unless specifically
recommended in the user-maintenance instructions
or published user-repair instructions that you
understand and have the skills to carry out.
• See Installation Instructions for grounding
requirements.
• ALWAYS follow the fabric care instructions supplied
by the garment manufacturer.
• Do not place items exposed to cooking oil in your
washer. Items contaminated with cooking oils may
contribute to a chemical reaction that could cause a
load to catch fire.
• Do not use fabric softeners or products to eliminate
static unless recommended by the manufacturer of
the fabric softener or product.
5
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion,
electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR INSTALLATION
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using this appliance, follow basic
precautions, including the following.
•
Refer to INSTALLATION INSTRUCTIONS for
detailed grounding procedures.
Installation
instructions are packed in the washer for installer's
reference. If the washer is moved to a new location,
have it checked and reinstalled by a qualified service
person. Failure to follow this warning can cause
serious injury, fire, electric shock or death.
•
Do not, under any circumstances cut or remove the
third (ground) prong from the power cord.
Failure
to follow this warning can cause serious injury, fire,
electric shock or death.
•
For personal safety, this appliance must be properly
grounded.
Failure to follow this warning can cause
serious injury, fire, electric shock or death.
•
The power cord of this appliance is equipped with
a 3-prong (grounding) plug which fits a standard
3-prong (grounding) wall outlet to
minimize the
possibillty of electric shock hazard from this
appliance.
•
This washer must be plugged into a 220-240 V~, 50
Hz grounded outlet.
Failure to follow this warning
can cause serious injury, fire, electric shock, or
death.
•
Have the wall outlet and circuit checked by a
qualified electrician to make sure the outlet is
properly grounded.
Failure to follow this warning can cause serious
injury, fire, electric shock, or death.
•
Where a standard 2-prong wall outlet is
encountered, it is your personal responsibility
and obligation to have it replaced with a properly
grounded 3-prong wall outlet.
Failure to follow this warning can cause serious
injury, fire, electric shock, or death.
•
Do not install on carpet. Install the washer on a
solid floor.
Failure to follow this warning can cause
serious leak damage.
•
Do not remove the ground prong. Do not use an
adapter or extension cord. Plug into a grounded
3 prong outlet.
Failure to follow this warning can
cause serious injury, fire, electric shock, or death.
•
The washer should always be plugged into its own
individual electrical outlet which has a voltage rating
that matches the rating plate.
This provides the best
performance and also prevents overloading house
wiring circuits which could cause a fire hazard from
overheated wires.
•
Never unplug your washer by pulling on the power
cord. Always grip the plug firmly and pull straight
out from the outlet.
Failure to follow this warning can
cause serious injury, fire, electric shock, or death.
•
Repair or replace all power cords that have become
frayed or otherwise damaged. Do not use a cord
that shows cracks or abrasion damage along its
length or at either end.
Failure to follow this warning
can cause serious injury, fire, electric shock,or death.
•
When installing or moving the washer, be careful
not to pinch, crush, or damage the power cord.
Failure to follow this warning can cause serious
injury, fire, electric shock, or death.
•
The washer must be installed and electrically
grounded by a qualified service person in
accordance with local codes,
to prevent shock
hazard and assure stability during operation.
•
The washer is heavy. Two or more people are
needed to install and move the appliance.
Failure to
do so can result in back or other injury
•
Store and install the washer where it will not
be exposed to temperatures below freezing or
exposed to outdoor weather conditions.
Failure to
follow this warning can cause serious leak damage.
•
Do not install the washer in humid spaces to reduce
the risk of electric shock.
Failure to follow this warning
can cause serious injury, fire, electric shock, or death.
•
To reduce the risk of injury to persons, adhere to all
industry recommended safety procedures including
the use of long sleeved gloves and safety glasses.
Failure to follow all of the safety warnings in this
manual could result in property damage, injury to
persons or death.
•
Keep the area underneath and around your appliances
free of combustible materials such as lint, paper, rags,
chemicals, etc.
Failure to do so can result in fire.
6
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire or
explosion, electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR USE, CARE, CLEANING, AND DISPOSAL
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic
precautions, including the following:
•
Unplug the washer before cleaning
to avoid the
risk of electric shock.
•
Never use harsh chemicals, abrasive cleaners,
or solvents to clean the washer.
They will
damage the finish.
•
Do not put oily or greasy rags or clothing on
top of the washer.
These substances give off
vapors that could ignite the materials.
•
Do not wash items that are soiled with
vegetable or cooking oil.
These items may
contain some oil after laundering.
Due to the remaining oil, the fabric may smoke
or catch fire by itself.
•
Disconnect this appliance from the power
supply before attempting any user maintenance.
Turning the controls to the OFF position does
not disconnect this appliance from the power
supply.
Failure to follow this warning can cause serious
injury, fire, electric shock, or death.
•
Do not combine laundry products for use in 1
load unless specified on the label. Do not mix
chlorine bleach with ammonia or acids such as
vinegar.
Follow package directions when using laundry
products. Incorrect usage can produce
poisonous gasresulting in serious injury or death.
•
Do not reach into the washer while parts are
moving. Before loading, unloading, or adding
items, push in the cycle selector knob and allow
the drum to coast to a complete stop before
reaching inside.
Failure to follow this warning can cause serious
injury, fire, electric shock, or death.
•
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use
of the appliance by a person
responsible for their safety.
•
Children should be supervised to
ensure that they do not play with
the appliance.
•
Do not allow children to play on or in the
washer.
Close supervision of children is necessary when
the washer is used near children. As children
grow, teach them the proper, safe use of all
appliances.
Failure to comply with these warnings could
result in serious personal injuries.
•
Destroy the carton, plastic bag, and other
packing materials after the washer is unpacked.
Children might use them for play.
Cartons covered with rugs, bedspreads or plastic
sheets can become airtight chambers. Failure
to comply with these warnings could result in
serious personal injuries.
•
Keep laundry products out of children's reach.
To prevent injury to persons, observe all
warnings on product labels. Failure to comply
with these warnings could result in serious
personal injuries.
7
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
For your safety, the information in this manual must be followed to minimize the risk of fire or
explosion, electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR USE, CARE, CLEANING, AND DISPOSAL
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic
precautions, including the following:
•
Remove the door to the washing compartment
to avoid the danger of children or small animals
getting trapped inside before your washer is
removed from service or discarded.
Failure to
do so can result injury or death.
•
Before the washer is removed from service or
discarded, remove the washer door to prevent
accidental entrapment.
Failure to comply with these warnings could
result in serious personal injuries.
•
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent or
similarly qualified persons in order
to avoid a hazard.
•
The new hose-sets supplied with
the appliance are to be used and
that old hose-sets should not be
reused.
8
TABLE OF CONTENTS
TABLE OF CONTENTS
2 PRODUCT FEATURES
3 IMPORTANT SAFETY INSTRUCTIONS
4 BASIC SAFETY PRECAUTIONS
4 GROUNDING INSTRUCTIONS
5 SAFETY INSTRUCTIONS FOR INSTALLATION
6 SAFETY INSTRUCTIONS FOR USE, CARE,
CLEANING, AND DISPOSAL
9 PARTS AND ACCESSORIES
9 Parts
9 Accessories
10 CONTROL PANEL FEATURES
10 Coin / Card type
11 OPL type
13 INSTALLATION INSTRUCTIONS
13 Checking and choosing the proper location
14 Unpacking and removing shipping bolts
14 Installing Hole cap
15 Connecting the water lines
16 Connecting the drain line
16 Installation of drain hose
17 Leveling the washing machine
18 PREPARATION
18 Precautions for fabric care before wash cycle
19 Fabric Care Labels
20 Using detergent/fabric softener
20 - Recommended detergent
20 - About the dispenser
21 - Loading the dispenser
22 OPERATING YOUR WASHER
23 PROGRAMMING MODE
24 Card type
25 Coin type
26 OPL type
27 Programming mode - Setup Mode
27 - 1. How to change regular price.
28 - 2. How to change regular delicates price.
29 - 3. How to change regular warm & cold price
30 - 4. How to change regular hot price
31 - 5. How to change special price
32 - 6. How to change special delicates price
33 - 7. How to change special warm & cold price
34 - 8. How to change special hot price
35 - 9. How to change add super wash price
36 - 10. How to change add super wash type
37 - 11. How to enter the
38 - 11-1. Special price day setup
39 - 11-2. Non-stop rinse
40 - 11-3. Add super wash setup
41 - 11-4.
Vend type setup - card type or coin type setup
42 - 11-5. Pre-wash set up
43 - 11-6. Twin spray set up
44 - 12. How to enter the
45 - 12-1. Pause function setup
46 - 13. How to enter the special price day
47 - 13-1. How to change to Sunday
48 - 14. Special price beginning time setup
49 - 15. Special price ending time setup
50 - 16. Washing time setup
51 - 17. Rinsing times per cycle
52 - 18. Rinsing time setup
53 - 19.
Top spin speed – final spin time depends on RPM
54 - 20. Value of coin 1
55 - 21. Value of coin 2
56 - 22. Penny increment pricing offset
57 - 23. How to change the water level
58 - 24. Beep volume
59 - 25. Time to keep the coin (Use only for coin type)
60 - 26. How to set drop count
61 - 27. How to set rinse spin enable
62 - 28. How to set auto dosing
63 - 29. How to enter the
64 - 30. How to set custom program
65 Programming Mode - Test mode
65 - 1.
66 - 2. Factory reset 67 - 3. Time set up
68 - 4. Courtesy cycle
69 - 5. Cycle Kill
70 - 6. Password -
71 - 7. Tub clean 72 Programming Mode - Collect mode
73 Collect Mode Data lists
74 MAINTENANCE
74 - Care after wash
74 - Storing the Washer
74 - Cleaning the Dispenser
75 - Cleaning the detergent box
75 - Cleaning the water inlet filters
76 - Clean the door seal
76 - Clean the drum, TUB CLEAN
77 ERROR MODE
78 POWER FAIL RECOVERY
78 DEFAULT WASHER SETTINGS
79 SPECIFICATIONS
9
PARTS AND ACCESSORIES
PARTS AND ACCESSORIES
Parts
Accessories
Detergent
dispenser
drawer
Door
Magnet Door
Plunger
(see page 2)
Control
panel
Door seal
Tu b
Water inlets
Shipping
bolts
Power
cord
Harness
(for connecting auto dosing)
(-)
(+)
Hot and Cold
Water Hoses
Non-skid pads
Caps (4)
(for covering shipping bolt holes)
Wrench
(for removing
shipping bolts and
adjusting leveling feet)
Hole cap (5)
(for securing auto
dosing hole)
10
CONTROL PANEL FEATURES
1 25
4 3
Optional function button
1. Display LED
2. Cycle button
3. Optional function button
4. Start/Pause button
5. Status LED
CONTROL PANEL FEATURES
Coin type (FH0C7FD4)
Card type (FH0C7FD7)
1 25
4 3
1 25
4
3
Optional function button
11
CONTROL PANEL FEATURES
How to Emergency stop button
1
Press emergency stop button in emergency
situation.
2
After emergency situation is resolved turn
the button follow by arrow sign (right).
1. Display LED
2. Cycle button
3. Optional function button
4. Start/Pause button
5. Status LED
6. Emergency stop button
OPL type (FH0C7FD3)
1 25
4 3
1 25
4
3
1 25
4 3
Optional function button
NOTE
• In case of pressing button by mistake,
machine can run normally by resetting
emergency stop button after 2, 3 seconds.
• After resetting emergency stop button,
LED light will blink in start button and by
pressing start button again, machine will
run normally again.
6
12
CONTROL PANEL FEATURES
Display LED
The display shows the vend price and
remaining time and programming options.
Error codes are also displayed here.
Optional function button
Wash time or rinse cycle can be added when
additional coin is inserted or a valid cash card is
entered.
Start/Pause button
The START LED flashes when the full vend
price has been satisfied and the cycle has been
chosen.
Status LED
Cycle button
Press the CYCLE button to select the desired
cycle based on laundry types and conditions.
Hot
Use for hot washing for heavy fabrics, such as
white clothes, table linens, and heavily soiled
clothes.
Warm
Use for warm washing for heavy fabrics, such
as jeans, corduroys, or work clothes.
Cold
Use for cold washing for sturdy fabrics, such as
casual work.
Delicates
Use for cold washing for synthetic fabrics, such
as washable knit fabric and no-iron finishes.
Start/Pause button
Display LEDStatus LED Cycle button
Optional function button
LED Description
LED flashes whenever the
washing cycle is in operation.
LED flashes whenever the
Rinsing cycle is in operation.
LED flashes whenever the
Spining cycle is in operation.
LED flashes whenever the
door lock is activated.
13
INSTALLATION INSTRUCTIONS
Space requirements
You must allow sufficient space for water lines,
the drain line, and airflow.
Installing on a floor
Install the washing machine on a solid floor
that is strong and rigid enough to support the
weight of the washing machine, even when
fully loaded, without flexing or bouncing. If
the floor has too much flex, you may need to
reinforce it to make it more rigid. If the floor
is not solid, it may cause severe vibration and
noise.
1
Clean the floor before installation.
- Make sure to select solid and smooth
ground.
2
Two or more people are needed for moving
and unpacking the washing machine.
3
Allow for sufficient space between the walls
and the washing machine for installation.
Checking and choosing the
proper location
32”
(81.4 cm)
53.9”
(137 cm)
4”
(10 cm)
22.5”
(57 cm)
INSTALLATION INSTRUCTIONS
NOTE
• Be sure to allow for wall, door, or floor
moldings that may increase the required
clearances.
NOTE
• The floor must be strong and rigid enough
to support the weight of the washer,
when fully loaded, without flexing or
bouncing. If your floor has too much flex,
you may need to reinforce it to make it
more rigid. A floor that is adequate for
a top-loading washer may not be rigid
enough for a front loading washer, due to
the difference in the spin speed and direction. If the floor is not solid, your washer
may vibrate and you may hear and feel the
vibration throughout your house.
• Before installing the washer, make sure
the floor is clean, dry and free of dust,
dirt, water and oils so the washer feet
can not slide easily. Leveling feet that can
move or slide on the floor can contribute
to excess vibration and noise due to poor
contact with the floor.
29”
(73.7 cm)
1”
(2.5 cm)
1”
(2.5 cm)
40.8”
(103.6 cm)
14
INSTALLATION INSTRUCTIONS
Installing Hole cap
1
Take the hole cap out from manual bag.
2
Insert the hole cap (5 pieces) into hose
connect in back of the machine.
Foam Tub Support Carton Base
NOTE
• Save the bolt assemblies for future use.
To prevent damage to internal
components, DO NOT transport the
washer without reinstalling the shipping
bolts.
• Failure to remove shipping bolts and
retainers may cause severe vibration
and noise, which can lead to permanent
damage to the washer. The cord is
secured to the back of the washer with
a shipping bolt to help prevent operation
with shipping bolts in place.
NOTE
• In case of using auto dosing feature,
inserting hole cap is unnecessary.
1
Remove the bottom two shipping bolts
with the wrench (included) to fully loosen
all four shipping bolts by turning them
counterclockwise and then pulling them out.
2
Locate the four hole caps included in the
accessory pack and install them in the
shipping bolt holes.
Unpacking and removing
shipping bolts
When removing the washer from the carton
base, be sure to remove the foam drum
support in the middle of the carton base.
If you must lay the washer down to remove the
base packaging materials, always lay it carefully
on its side.
DO NOT lay the washer on its front or back.
Shipping
bolt
Retainer
Cap
Hole cap
15
INSTALLATION INSTRUCTIONS
Connecting the water lines
1
Check the rubber seals on both sides of the
hose.
- Insert a rubber seal into the threaded
fittings on each hose to prevent leaking.
2
Connect the water supply hoses to the HOT
and COLD water faucets tightly by hand and
then tighten another 2/3 turn with pliers.
- Connect the blue hose to a cold water
faucet and the red hose to a hot water
faucet.
4
Connect the hoses to the water inlets tightly
by hand and then tighten another 2/3 turn
with pliers.
- Connect the blue hose to the cold water
inlet and the red hose to the hot water
inlet.
5
Check for leaks by turning on the faucets.
- If water leaks, check steps 1 to 4 again.
3
After connecting inlet hose to water faucets,
turn on the water faucets to flush out
foreign substances (dirt, sand or sawdust)
in the water lines. Let water drain into a
bucket, and check the water temperature.
Cold water
inlet
Hot water
inlet
Rubber seal
Water hose
(To water inlet on the
washing machine)
Rubber seal
Water hose
(To faucet)
WARNING
• Do not overtighten. Damage to the cou-
pling can result.
WARNING
• Do not overtighten the hoses.
Overtightening can damage the valves
resulting in leaking and property damage.
NOTE
• For your safety, and for extended product
life, use only authorized components. The
manufacturer is not responsible for product
malfunction or accidents caused by the
use of separately purchased unauthorized
parts.
• Use new hoses when you install the
washing machine. Do not reuse old hoses.
Use only the inlet hoses provided with the
washer. LG does not recommend the use
of aftermarket hoses.
• Periodically check the hoses for cracks,
leaks and wear, and replace the hoses
every 5 years.
• Do not stretch the water hoses intentionally, and make sure that they are not crushed
by other objects.
• Water supply pressure must be between
1.0 kgf/cm² and 8.0 kgf/cm² (0.1~0.8 MPa).
If the water supply pressure is more than
8.0 kgf/cm², a pressure reducing valve
must be installed.
• To provide optimum washing performance
the hot water temperature should be set at
120-135°F (48-57°C) and the cold at 60°F
(15°C).
16
INSTALLATION INSTRUCTIONS
Connecting the drain line
Secure the drain hose in place to prevent
moving and leaking.
Installation of drain hose
NOTE
• The drain hose should be properly secured.
Failure to properly secure the drain hose
can result in flooding and malfunction.
• While installing drain hose, height of hose
should not be over 2.7 inch (from bottom
of the machine).
• The drain must be installed in accordance
with any applicable local codes and
regulations.
• Make sure that the water lines are not
stretched, pinched, crushed, or kinked.
1
Remove drain cap from the machine.
2
Place the end of the drain hose in the
drainage ditch of the floor drain system.
The drain hose should not be placed higher
than 2.7 in. from the bottom of the washer.
• Make sure that the hose is not twisted.
• Do not submerge the end of the hose.
Max. 2.7
"
(6.9 cm)
17
INSTALLATION INSTRUCTIONS
Leveling the washing machine
The washer tub of your new washing machine
spins at very high speeds. To minimize
vibration, noise, and unwanted movement, the
floor must be perfectly level and solid.
1
Check the washing machine’s level.
- Check the precise level by rocking the top
edges of the washing machine or placing
a level on the washing machine. The slope
beneath the washing machine must not
exceed 1°, and all four leveling feet must
rest firmly on the floor.
2
Turn the lower leveling feet clockwise to
level the washing machine.
- Turning the lower leveling feet clockwise
raises the washing machine.
3
Turn the locknuts counterclockwise and
tighten them when the washing machine is
level.
4
Check the washing machine’s level again.
- Push or rock the top edges of the washing
machine gently to make sure that the
washing machine does not rock.
- If the washing machine rocks, repeat steps
1 to 3.
Using non-skid pads (optional)
If you install the washing machine on a slippery
surface, it may move because of excessive
vibration. Incorrect leveling may cause
malfunction through noise and vibration. In the
event of this, lay the non-skid pads under the
leveling feet and adjust the level.
1
Clean the floor to attach the non-skid pads.
- Use a dry rag to remove and clean foreign
objects or moisture. If moisture remains,
the non-skid pads may slip.
2
Adjust the level after placing the washing
machine in the installation area.
3
Place the adhesive side of the non-skid pad
on the floor.
- It is most effective to install the non-skid
pads under the front legs. If it is hard to
place the pads under the front legs, place
them under the back legs.
4
Check the washing machine’s level again.
- Push or rock the top edges of the washing
machine gently to make sure that the
washing machine does not rock. If the
washing machine rocks, level the washing
machine again.
Level
1°
Raise
Tighten all 4 lock
nuts securely
using
the wrench.
Remove
backing
This side up
Adhesive
side
WARNING
• Using the washing machine without
leveling, it may result in malfunction caused
by the production of excess vibration and
noise.
• Use the leveling feet only when you level
the washing machine. If you raise the
leveling feet unnecessarily, it may cause
abnormal vibration of the washing machine.
18
PREPARATION
Check all pockets to make sure that they are
u
empty.
- Items such as clips, matches, pens, coins,
and keys can damage both your washer and
your clothes.
Close zippers, hooks, and drawstrings
u
to prevent these items from snagging or
tangling on other clothes.
Pretreat heavily stained areas before
u
washing.
- Doing so will produce clean, stain-free
results.
Combine large and small items in a load.
u
Load large items first.
Large items should not be more than half of
u
the total washload.
The washer can be fully loaded, but the drum
u
should not be tightly packed with items.
-The door of the washer should close easily.
Do not wash single items, except for bulky
u
items such as blankets. Make sure to wash
laundry in similar types of loads.
- Washing a single small item may result in
the tub becoming unbalanced, vibrating,
making a noise.
Do not wash waterproof clothes.
u
- This may cause abnormal vibration or may
cause the load to bounce, which could
damage the tub.
Check if there are any other foreign objects
u
in the door seal and take extra care that
clothes do not get caught there.
- Foreign objects in the door seal may stain
clothes, and water may leak if clothes get
caught in the door seal.
Wash underwear or small, light items in a
u
laundry net.
- Small, light items may get caught in the
door seal, and a brassiere hook may
damage other items or the tub.
Brush heavy soil, dust, or hair off fabrics
u
before washing.
- Laundry may not wash clean if there is
dirt or sand on the fabrics, or they may be
damaged due to particles rubbing against
sheer fabrics.
Wash blankets individually.
u
- Washing more than one blanket together
may produce unclean results due to tangling
or an unbalanced load.
Always separate fabrics according to their
u
colors and wash them separately to prevent
colors from running.
- Fabrics may damage or become stained
due to fabric dyes running or due to foreign
objects transferring from one fabric to
another.
PREPARATION
Precautions for fabric care before wash cycle
Read and observe the following to prevent shrinkage or damage to clothes.
19
PREPARATION
Category Label Directions
Washing
Hand Wash
Machine Wash,
Normal Cycle
Use Permanent
Press/Wrinkle
Resistant washing
machine setting
(which has a cool
down or
cold spray before the
reduced spin)
Use Gentle/Delicate
washing machine
setting (slow
agitation and/ or
reduced wash time).
Do Not Wash
Do Not Wring
Water
Temperature
Hot
Warm
Cold/Cool
Bleach
symbols
Any Bleach (When
Needed)
Only Non-Chlorine
Bleach
(When Needed)
Do Not Bleach
Fabric care labels
Most articles of clothing feature fabric care
labels that include instructions for proper care.
Colors
Whites / Lights / Darks
Soil
Heavy / Normal / Light
Fabric
Delicates / Easy Care / Sturdy
Cottons
Lint
Lint Producers / Lint Collectors
Sorting laundry
It is recommended that you sort laundry into
similar loads that are washable in the same
cycle.
Refer to the following chart for sorting clothes
20
PREPARATION
NOTE
• It is normal for a small amount of water to
remain in the dispenser compartments at
the end of the cycle.
About the dispenser
The automatic dispenser consists of three
compartments which hold:
• Liquid chlorine bleach.
• Liquid fabric softener.
• Liquid and powdered detergent and color-
safe bleach for main wash.
All laundry products can be added at once in
their respective dispenser compartments. They
will be dispensed at the appropriate time for
the most effective cleaning.
After adding the laundry products to the
dispenser, close the dispenser cover.
To add detergent, bleach, and fabric softener to
the automatic dispenser:
1. Open the dispenser cover.
2. Load the laundry products into the
appropriate compartments.
3. Slowly close the dispenser cover to avoid
early dispensing of the laundry products.
NOTE
• Use HE detergents, since using a regular
detergent will produce excessive suds.
• HE detergents produce fewer suds,
dissolve more efficiently to improve
washing and rinsing performance, and
help to keep the interior of your washer
clean.
• Use less detergent for soft water.
• Wipe up any spills immediately, as liquids
could damage the finish and the control
panel of the washing machine.
• Using too much detergent can cause
a build-up in the tub resulting in
unsatisfactory performance and machine
malfunction.
• If you use a detergent that does not
dissolve easily or a detergent with high
viscosity, it will leave a residue on the tub,
which may not rinse properly.
Using detergent/fabric softener
Recommended detergent
Use HE (High-Efficiency) detergent for frontloading washing machines. HE detergents
dissolve more efficiently and produce
fewer suds to ensure efficient washing and
rinsing. Use the correct amount of detergent
as indicated on the label of the detergent
packaging.
21
PREPARATION
Loading the dispenser
Main Wash Detergent Compartment
This compartment holds laundry detergent
for the main wash cycle, which is added to
the load at the beginning of the cycle. Always
use HE (High-Efficiency) detergent with your
washing machine.
Follow the detergent manufacturer's
instructions with respect to the amount of
detergent to use, and never use more than
the recommended amount. Using too much
detergent can result in detergent buildup in
clothing and the washer. Either powdered or
liquid detergent may be used.
Liquid Bleach Compartment
This compartment holds liquid chlorine bleach,
which will be dispensed automatically at the
proper time during the wash cycle.
Fabric Softener Compartment
This compartment holds liquid fabric softener,
which will be automatically dispensed during
the final rinse cycle.
NOTE
• Liquid or powdered color-safe bleach may
be added to the main wash compartment
with detergent of the same type.
NOTE
• Do not add powdered or liquid color-safe
bleach to this compartment.
• Always follow the manufacturer’s
recommendations when adding bleach.
Do not exceed the maximum fill line.
Using too much bleach can damage
fabrics.
• Never pour undiluted liquid chlorine bleach
directly onto the load or into the drum.
Fabric damage can occur.
NOTE
• Always follow the manufacturer’s
recommendations when adding fabric
softener. Do not exceed the maximum fill
line. Using too much fabric softener may
result in stained clothes.
• Dilute concentrated fabric softeners with
warm water. Do not exceed the maximum
fill line.
• Never pour fabric softener directly onto
the load or into the drum.
Liquid Fabric
Softener
Compartment
Main Wash
Detergent
Compartment
Liquid Chlorine
Bleach
Compartment
22
OPERATING YOUR WASHER
OPERATING YOUR WASHER
NOTE
• When the card balance is not enough,
machine displays the card balance for
5 seconds and then displays
message repetitively
NOTE
• The machine will not start until sufficient
coins are inserted.
❋
Do not work any button and stop the washer
(When the washer is operating) or (when a
cycle is in progress)
1. Ready mode
1) Coin / Card type
– The cycle LEDs are lit at the same time,
when the price of cycles are equal.
2) OPL type
– The cycle LEDs flash at the same time,
and displayed PUSH.
4. Add super wash
Wash time or rinse cycle can be added
when additional coin is inserted or a valid
cash card is entered.
5. Change course
You cannot change the cycle while the
machine is running.
6. Cycle finish
The machine stops and LED display shows
with beeper sound.
2. Insert card/coin (not for OPL type)
Insert a cash card that has a sufficient balance.
The card balance should be more than the
programmed vend price for a selected cycle.
3. Select the cycle
Press the desired button and press the
Start button. The display LED will show the
remaining time and the selected cycle starts.
• Select cycles designed for different types of
fabric and soil levels.
• Insert a sufficient amount of change that
is more than the programmed vend price
for the selected cycle.
CYCLE Fabric type
Wash/Rinse
Temp.
Hot
Cotton, linen, towels,
shirts, sheets
Hot / Cold
Warm
Cotton, mixed loads, work
clothes, jeans, shirts
Warm /
Cold
Cold
Cotton, dress shirts,
pants, wrinkle-free
clothing, cotton/poly blend
clothing, tablecloths
Cold / Cold
Delicates
Dress shirts, blouses,
nylons, sheer or lacey
garments
Cold / Cold
WARNING
• To reduce the risk of fire, electric shock, or
injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS before operating
this appliance.
NOTE
• Price setting varies by country
• Set your country from
mode
(Refer
How to enter the
)
• After EEPT, reset your country (Default
country is EUK)
23
PROGRAMMING MODE
How to enter Programming mode
You can enter programming mode only for Idle
state and pause state.
- Card Type
1) Insert service card.
2) Display will show .
- Coin Type
1) Dissemble upper coin box key.
2) Take out the coin drop from the coin box.
3) Turn on/off the toggle switch at the back of
the coin box.
4) Display will show .
- All Types
1) Push the Hot & Cold button at the same
time.
2) Push the Warm button 3 times.
3) Push the Start button.
4) Display will show .
How to use button
You can change Washer vend price, cycle time
and Cycle parameters, etc.
: You can check machine information or change setting on Program setup, collect information data,
Diagnostic test. There are two methods that you can enter programming mode.
PROGRAMMING MODE
Coin Box Key
- Coin type -
- Card type - - OPL type -
Insert Debit Card
Coin Vault
Openings close
Press
Button
Description
Hot
Moves to upper level or
Comes back to Idle State
Warm
Moves through modes in the same
level (+)
Cold
Moves through modes in the same
level (-)
Start
Enters the selected mode
NOTE
• If you turn on the power without connecting meter case for the first time, the machine display
.
• When the machine is shipped from the factory, it is set in the coin type. You can change Card/
Coin type by button. (For more information refer to SETUP mode.)
• The machine will display PUSH for OPL type.
• Price setting varies by country
• Set your country from
mode (Refer
How to enter the
)
• After EEPT, reset your country (Default country is EUK)
24
PROGRAMMING MODE
Algorithm flow chart shows how to control programming mode.
Before program set, check the structure of programming mode.
1.
Turn on/off toggle switch or Insert service card, for entering set up mode (or follow OPL type instructions).
2. Press Hot button to move to the upper level.
3. Press Warm (+) or Cold (-) button if you want to be at the same level.
4. Press Start button to enter the details of Set up or Diagnostic Tests.
is to set price value, time value, vend type, etc.
consists of line test, reset, free cycle, and kill cycle.
is to collect the usage data.
Card type
Structure of Programming mode
NOTE
• Do not use , .
• It is used only in inspecting the machine.
• Price setting varies by country
• Set your country from mode (Refer
How to enter the
)
• After EEPT, reset your country (Default country is EUK)
Loading...