LG FB162-X0U, FB162-D0U, FB162-A0U User Manual

Mini Home Theater OWNER’S MANUAL

MODEL: FB162

FB162-X0U/D0U/A0U FBS162V

Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.

FB162_A0U.JA2ILLN_ENG

USB

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING: Do not install this equipment in a confined space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction have been adhered to.

CAUTION:

This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.

CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit;

That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.

CLASS 1 LASER PRODUCT KLASSE 1

LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1

LASER APPARAT CLASSE 1

PRODUIT LASER

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK

OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

Introduction

Maintenance and Service . . . . . . . . . . . . . . . . . .3

Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Front Panel/Back Panel . . . . . . . . . . . . . . . . . . . .5

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . .6

Installation and Setup

TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Antenna (Aerial) Connections . . . . . . . . . . . . . .7

Auxiliary Function . . . . . . . . . . . . . . . . . . . . . . . .8

Headphone Jack . . . . . . . . . . . . . . . . . . . . . . . . . .8

Using Microphone . . . . . . . . . . . . . . . . . . . . . . . .8

To Adjust ECHO Volume . . . . . . . . . . . . . . . . . . .8

USB Function . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Compatible Devices . . . . . . . . . . . . . . . . . . . . . . .9

Speaker System Connection . . . . . . . . . . . . . . .9

Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . .10

Timer Function . . . . . . . . . . . . . . . . . . . . . . . . . .10

Sleep Timer Function . . . . . . . . . . . . . . . . . . . . .10

Displaying Disc Information on-screen . . . . . .11

Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .11

General Operation . . . . . . . . . . . . . . . . . . . . . . .11

Language . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Lock (Parental Control) . . . . . . . . . . . . . . . . . .13

Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Operation

General features . . . . . . . . . . . . . . . . . . . . . . . . .15

Additional features . . . . . . . . . . . . . . . . . . . . . . .16

Playing an Audio CD or MP3/WMA file . . . . . .17

Programmed Playback . . . . . . . . . . . . . . . . . . .17

Viewing a JPEG file . . . . . . . . . . . . . . . . . . . . . .18

Playing a DivX Movie file . . . . . . . . . . . . . . . . . .19

Presetting the Radio Stations . . . . . . . . . . . . . .20

Listening to the Radio . . . . . . . . . . . . . . . . . . . .20

RDS Operation - Optional . . . . . . . . . . . . . . . . .21

Dimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

EQUALIZER Effect . . . . . . . . . . . . . . . . . . . . . . .22

DEMO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

DISPLAY MODE . . . . . . . . . . . . . . . . . . . . . . . . .22

XDSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

MP3 Optimizer . . . . . . . . . . . . . . . . . . . . . . . . . .22

XTS Pro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

VIRTUAL sound . . . . . . . . . . . . . . . . . . . . . . . . .22

REFERENCE

Language Codes . . . . . . . . . . . . . . . . . . . . . . . .23

Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Troubleshooting . . . . . . . . . . . . . . . . . . . . . .24-25

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Maintenance and Service

Refer to the information in this chapter before contacting a service technician.

Handling the unit

When shipping the unit

Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory.

Keeping the exterior surfaces clean

• Do not use volatile liquids such as insecticide spray near the unit.

•Do not leave rubber or plastic products in contact with the unit for a long period of time. since they leave marks on the surface.

Cleaning the unit

To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit.

Maintaining the Unit

The unit is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished. Depending on the operating environment, regular inspection and maintenance are recommended after every 1,000 hours of use. For details, please contact your nearest authorized service center.

The manual largely contains detailed explanation items about how to operate the unit with the remote control.

Precautions in using the touch buttons

• Use the touch buttons with clean and dry hands.

- In a humid environment, wipe out any moisture on the touch buttons before using.

• Do not press the touch buttons hard to make it work.

- If you apply too much strength, it can damage the sensor of the touch buttons.

• Touch the button that you want to work in order to

operate the function correctly.

• Be careful not to have any conductive material such

as metallic object on the touch buttons. It can cause malfunctions.

Before use

To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. This manual provides information on the operation and maintenance of your unit. Should the unit require service, contact an authorized service location.

About the Symbol Display

“ ” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific DVD video disc.

Symbol Used in this Manual

Note:

Indicates special notes and operating features.

Tip:

Indicates tips and hints for making the task easier.

A section whose title has one of the following symbols is applicable only to the disc represented by the symbol.

Indicates hazards likely to cause harm to the unit itself or other material damage.

DVD and finalized DVD±R/RW

Video CDs

Audio CDs

MP3 files

WMA files

JPEG files

DivX files

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.

Types of Playable Discs

DVD (8 cm / 12 cm disc)

Video CD (VCD) (8 cm / 12 cm disc)

Audio CD (8 cm / 12 cm disc)

In addition, this unit can play a DVD±R/RW, SVCD and CD-R or CD-RW that contains audio titles, MP3, WMA, JPEG or DivX files.

Note:

• Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs may not be played on the unit.

• Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.

•

Do not use irregularly shaped CDs (e.g., heartshaped

or octagonal). It may result in malfunctions.

Regional Code

This unit has a regional code printed on the bottom of the unit. This unit can play only DVD discs labelled as the same as the rear of the unit or “ALL”.

Note on Regional Codes

• Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your DVD player’s regional code or the disc cannot play.

• If you try to play a DVD with a different regional code from your player, the message “Check Regional Code” appears on the TV screen.

DivX

JPEG

WMA

MP3

ACD

VCD

DVD

Introduction

POWER SAVE MODE

You can set up the unit into an economic power save mode. In power-on status, press and hold 1(POWER) button for about 3 seconds.

- Nothing is displayed in the display window when the unit goes into the power save mode.

To cance power save mode, press 1(POWER).

Introduction

Front Panel/ Back Panel

1.1 (POWER)

2. VOLUME*

3. FUNC. (FUNCTION) (FM, AM, DVD/CD, USB, AUX)

4. .(SKIP) TUN. (-) (TUNER)

5. XTS pro

6.x(STOP) MO./ ST. (MONO/ STEREO)

7. DISC TRAY

8. EQ master/ DEMO button

9. CLOCK button

10. TIMER button

11. SET/ RDS(OPTIONAL) button

12. PHONES (Headphone jack : 3.5mm)

13. MIC1/ MIC2 (MIC Jacks)

14. USB connector

15. Z (OPEN/CLOSE)

16. > (SKIP) TUN. (+) (TUNER)

17. XDSS plus / (MP3 Optimizer)

18.BB/[](PLAY/PAUSE)

19. Display window

20. Power cord

21. Antenna terminal

22. AUX IN (Auxiliary input) connector

23. COMPONENT VIDEO OUT (PROGRESSIVE SCAN) connector (Y P

b Pr)

24. VIDEO OUT Jack

25. Speaker terminal

*VOLUME Adjustment

Move your finger around the touch wheel.

MIC1 MIC2

10 11

OPEN

Remote Control

1. POWER button

2. FUNCTION SELECT buttons (TUNER/ BAND,DVD, AUX, USB)

3. NUMERIC buttons (0-9)

EQ master, XDSS plus, XTS Pro, VSM

buttons

5. SETUP button

6. • ARROW buttons (v / V / b / B )

(Selects an option in the menu.)

• PRESET (-/+) buttons (v / V )

• TUN. (-/+) buttons (b / B)

7. SELECT/ ENTER button

8. MENU button (Use the MENU button to display the menu screen

included on DVD video discs.)

9. PROG./MEMO. button

10. REPEAT button

11. REPEAT A-B button

12. • SCAN (

FF/GG

) buttons

• SLOW (t/T) buttons

• SKIP (./>) buttons

• STOP (x)/MO.ST. button

• PAUSE([])/ STEP button

• PLAY (

) button

13. • DIMMER button

• DISP.MODE button

• RDS, PTY button - Optional

14. ECHO VOL. ( / ), MIC VOL. ( / ) buttons

15. • CLEAR button

• ZOOM button

• MARKER, SEARCH buttons

16. VOLUME -/+ buttons

17. TITLE button (Use the TITLE button to display the title screen

included on DVD video discs.)

18. DISPLAY button

19. • SOUND MODE button

• AUDIO ( ) button

• SUBTITLE ( ) button

• RETURN ( ) button

20. SLEEP button

21. MUTE ( )button

Remote Control Operation Range

Point the remote control at the remote sensor and press the buttons.

• Distance: About 23 ft (7 m) from the front of the remote

sensor

• Angle: About 30° in each direction in front of the remote

sensor

Remote control battery installation

Remove the battery cover on the rear of the remote control, and insert two R03

(size AAA) batteries with and aligned correctly.

Caution

Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.).

Installation and Setup

TV Connection

Make one of the following connections, depending on the capabilities of your existing equipment.

Tip:

• Depending on your TV and other equipment you wish to connect, there are various ways you could connect the

unit

. Use one of the connections

described below.

• Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.

Caution:

•

Make sure the unit is connected directly to the TV. Select the correct AV input on your TV.

• Do not connect your

unit

to TV via your VCR. The DVD image could be distorted by the copy protection system.

Video connection

Connect the VIDEO OUT jack from the unit to the VIDEO IN jack on the TV using the video cable supplied (V).

Component Video connection

Connect the COMPONENT VIDEO OUT jacks from the unit to the corresponding jacks on the TV using an YP

b Pr cable (C).

Antenna (Aerial) Connections

Connect the supplied FM/AM antennas for listening to the radio.

Note:

•To prevent noise pickup, keep the AM loop antenna away from the unit and other components.

• Be sure to fully extend the FM wire antenna.

• After connecting the FM wire antenna, keep it as horizontal as possible.

Pb Pr

COMPONENT VIDEO /

PROGRESSIVE SCAN INPUT

VIDEO INPUT

Rear of TV

FM wire antenna (supplied)

AM(MW) loop antenna

(aerial) (supplied)

For AM(MW) reception,connect the loop antenna (aerial) to the terminal marked AM

Auxiliary Function

Connect an auxiliary device such as a TV or VCR via the rear mounted AUX connector and press AUX [Refer to the example image(1) shown below]. When you connect each end of the bundled portable in cable with both the AUX connector and the headphone jack of a portable device (like MP3 player, cassette tape player, CD player, etc.), you can hear the sound of the device through the speakers [Refer to the example image(2) shown below].

Note:

Turn the unit off and then connect an auxiliary device before you connect an auxiliary device. Because it may be made a noise.

Headphone Jack

Connect a stereo headphone plug ( 3.5mm) into the headphone jack. The speakers are automatically disconnected when you plug in the headphones (not supplied).

Using Microphone

You can sing to a music source by connecting a microphone to the unit.

1. Connect your microphone to the MIC1/ MIC 2 Jacks.

“” will be shown in the display window.

2. Play a music you want.

3. Sing along with the accompaniment. Adjust the microphone volume by pressing MIC VOL. button. (MIN,1 - 14, MAX steps)

Note:

• When not using the microphone, set the MIC VOL. to

minimum or turn off the MICs and remove the microphone from the MIC Jacks.

• If the microphone is set too near the speaker, a howling sound may be produced. In this case, move the microphone away from the speaker or decrease the sound level by using MIC VOL..

• If sound through the microphone is extremely loud, it may be distorted. In this case, decrese MIC volume.

To Adjust ECHO Volume

You can give an echo effect to the sound from the microphones.

Press ECHO VOL. (/) on the remote control to increase the echo volume or decrease it. (MIN,1 - 14, MAX steps)

Auxiliary Device

To AUDIO out

Portable in cable

To AUDIO in

Example (1)

Example (2)

Portable Device

Installation and Setup

USB Function

You can enjoy the media files such as tunes (MP3/WMA/PHOTO/VIDEO file) saved in an MP3 player or USB memory by connecting the storage device to the USB port of this unit.

Compatible Devices

1. Devices which require additional program installation when you have connected it to a computer, are not supported.

2. MP3 Player : Flash type MP3 player.

•

he MP3 player requiring installation of a driver

is not supported.

3. USB Flash Drive : Devices that support USB2.0 or

USB1.1.

To Remove the USB from the unit

1. Choose the other functions except USB function in order to remove the USB.

2. Remove the USB from the unit.

Note:

If you want to operate other functions, see the CD Playback section. Refer to the page 15, 16, and 17.

Note:

•Do not extract the USB device in operating.

•Aback up demands to prevent a data damage.

• If you use a USB extension cable or USB hub, the

USB device might not be recognized.

•Adevice using NTFS file system is not supported.

(Only FAT (16/32) file system is supported.)

• The USB function of this unit does not support all

USB devices.

• Digital camera and mobile phone are not supported.

• This unit is not supported when the total number of

files is 1000 or more.

• If the drive of USB device is two or more, a drive

folder is displayed on the screen. If you want to move to the previous menu after you select a folder, press RETURN.

Speaker System Connection

Connect the speaker cable to the speaker terminal.

Note:

• Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cords are reversed, the sound will be distorted and will lack base.

• Connect the Left/ Right speaker correctly. If it reversed, the sound may be distorted.

Front speaker (L)

Front

speaker (R)

+ 18 hidden pages