LG FA164DAB Owner's Manual
P/NO : MFL61543973
FA164DAB (FA164-M0P, FAS164F)
As an E
NERGY STA R
®
Partner,
LG has determined that this
product or product models meet
the E
NERGY STA R
®
guidelines for
energy efficiency.
ENERGY
STAR
®
is a U.S. registered mark.
iPod is a trademark of Apple Computer, Inc, registered in the U.S. and other countries.
ENGLISH
FA164DAB-M0P_DGBRLL_ENG 9/21/09 1:59 PM Page 1
2
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING : Do not install this equipment in a confined space such as a book case or
similar unit.
CAUTION : This product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and
retain it for future reference. Shall the unit require maintenance, contact an authorized
service center.
Use of controls, adjustments or the performance of procedures other than those
specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION : The apparatus shall not be exposed to water (dripping or splashing) and
no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit ;
That is, a single outlet circuit which powers only that appliance and has no additional
outlets or branch circuits. Check the specification page of this owner's manual to be
certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced
with an exact replacement part by an authorized service center.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord plug. When installing the
product, ensure that the plug is easily accessible.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from
the municipal waste stream via designated collection facilities appointed by
the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please
contact your city office, waste disposal service or the shop where you
purchased the product.
This product is manufactured to comply with EMC Directive
2004/108/EC and Low Voltage Directive 2006/95/EC.
European representative :
LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere, The Netherlands
(Tel : +31-036-547-8940)
Safety Precaution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
FA164DAB-M0P_DGBRLL_ENG 9/21/09 1:59 PM Page 2
3
Precautions in using the touch buttons
• Use the touch buttons with clean and dry hands.
- In a humid environment, wipe out any moisture on the touch buttons
before using.
• Do not press the touch buttons hard to make it work.
- If you apply too much strength, it can damage the sensor of the
touch buttons.
• Touch the button that you want to work in order to operate the function
correctly.
• Be careful not to have any conductive material such as metallic object
on the touch buttons, and it can cause malfunctions.
Contents
Setting up 4
Main Unit 5
Remote control 6
Listening to CDs 7
Listening to the radio 8
Listening to the DAB radio 9
Listening to music from your portable player 9
Playing the iPod 10
Using an USB device 11
Setting the Clock 11
Recording to USB 12
Troubleshooting 13
Specifications 13
POWER: This unit operates on a mains supply of 200-240V~, 50/60Hz.
WIRING: This unit is supplied with a BSI 1363 approved 13 amp mains plug, fused at 5 amp.
When replacing the fuse always use a 5 amp BS 1362, BSI or ASTA approved type. Never use
this plug with the fuse cover omitted. To obtain a replacement fuse cover contact your dealer. If
the type of plug supplied is not suitable for the mains sockets in your home, then the plug should
be removed and a suitable type fitted. Please refer to the wiring instructions below:
WARNING: A mains plug removed from the mains lead of this unit must be destroyed. A mains
plug with bared wires is hazardous if inserted in a mains socket.
Do not connect either wire to the earth pin, marked with the letter E or with the earth symbol
or coloured green or green and yellow. If any other plug is fitted, use a 5 amp fuse, either in the
plug, or at the distribution board.
IMPORTANT: The wires in this mains lead are coloured in accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the wires in the mains lead of this unit
may not correspond with the coloured marking identifying the terminals in your plug, proceed as
follows: The wire which is coloured blue must be connected to the terminal which is marked with
the letter N or coloured black. The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
FA164DAB-M0P_DGBRLL_ENG 9/21/09 1:59 PM Page 3
4
Setting up
C
O
M
P
O
M
E
N
T
V
I
D
E
O
(
P
R
O
G
R
ES
S
I
V
E
S
C
A
N
)
a
b Connect the speaker cables to the player
Cables from the left-hand speaker connect to the terminal
marked L (left) + (plus) and - (minus). Cables from the righthand speaker are connected to the terminal marked R (right) +
(plus) and - (minus).
To connect the cable to the player, press each of the four square
plastic finger pads on the rear of the player. The connector will
open ready to receive a cable.
c
Connect the DAB aerial
Assemble the antenna to the support structure and attach it to
the plate. Then place it to the place where strong signals are
received.
d
Plug the power plug into a wall socket
b
c
a
Connect the FM aerial
The reception will be at its best when the two loose ends of the aerial are in a straight line and horizontal.
FA164DAB-M0P_DGBRLL_ENG 9/21/09 1:59 PM Page 4
5
Main Unit
USB REC.
Recording to USB.
11/]]
(Power)
Turn the unit on and off.
USB Port
iPod Dock
Display Window
EQ/ DEMO
You can choose fixed sound impression.
Press DEMO in power off state to demonstrate the
function on display window. To cancel it, press 11/
]]
or DEMO again.
CLOCK
(See “Setting the Clock” )
TIMER
(See the “Using your player as an alarm clock”)
SET/ RDS
Confirms the settings.
PORTABLE IN
For connecting a portable device and listening to
sound of it through this system’s speakers.
PHONES
Headphone jack
xx
Stop
]] IIII/ iiii ]]
Scanning/ Tuning/ Searching
BB// XX
Play/ Pause
VOL +/-
Volume control
Disc Slot
• Do not push a disc forcibly into the CD slot.
• Do not pull or push a disc while a disc is ejected.
• Press ZZagain to reinsert the disc after ejecting it.
• pick it to the CD slot with the label side toward
ZZ
Ejects or insert the disc from slot loader.
TOP
FRONT
Power Save Mode
You can set up the unit into an economic power save
mode. In power-on status, press and hold
11/]]
button
for about 3 seconds.
- Nothing is displayed in the display window when the
unit is turned off.
To cancel, press
11/]]
, CLOCK, TIMER or EQ/DEMO.
FUNC.
(Function) Selects the function.
FA164DAB-M0P_DGBRLL_ENG 9/21/09 1:59 PM Page 5
VOL +
VOL
-
Loading...