LG FA-162 User Manual

Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and
completely.

MICRO Hi-Fi SYSTEM

OWNER’S MANUAL

MODEL: FA162

FA162-A0U/D0U/X0U
FAS162F

E2(MK.CZ)_FA162_ENG_MFL36264631

USB

2

This lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated dangerous voltage within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of impor­tant operating and maintenance (servicing) instruc­tions in the literature accompanying the product.

WARNING: Do not install this equipment in a confined space
such as a book case or similar unit.

CAUTION: Do not block any ventilation openings. Install in accor­dance with the manufacturer's instructions.

Slots and openings in the cabinet are provided for ventilation and
to ensure reliable operation of the product and to protect it from
over heating.
The openings should be never be blocked by placing the product
on a bed, sofa, rug or other similar surface. This product should
not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's
instruction have been adhered to.

CAUTION:

This product employs a Laser System.
To ensure proper use of this product, please read this owner’s
manual carefully and retain it for future reference. Should the unit
require maintenance, contact an authorized service center.
Use of controls, adjustments or the performance of procedures
other than those specified herein may result in hazardous radia­tion exposure.
To prevent direct exposure to laser beam, do not try to open the
enclosure. Visible laser radiation when open. DO NOT STARE
INTO BEAM.

CAUTION: The apparatus should not be exposed to water (drip­ping or splashing) and no objects filled with liquids, such as
vases, should be placed on the apparatus.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicat­ed circuit;

That is, a single outlet circuit which powers only that appliance
and has no additional outlets or branch circuits. Check the speci­fication page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or
damaged wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous. Any of these
conditions could result in electric shock or fire. Periodically exam­ine the cord of your appliance, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of the appli­ance, and have the cord replaced with an exact replacement part
by an authorized servicer.

Protect the power cord from physical or mechanical abuse, such
as being twisted, kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall outlets, and the point
where the cord exits the appliance.

To disconnect power from the mains, pull out the mains cord
plug. When installing the product, ensure that the plug is easily
accessible.

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is
attached to a product it means the product is cov­ered by the European Directive 2002/96/EC.

2. All electrical and electronic products should be dis­posed of separately from the municipal waste
stream via designated collection facilities appointed
by the government or the local authorities.

3. The correct disposal of your old appliance will help
prevent potential negative consequences for the
environment and human health.

4. For more detailed information about disposal of your
old appliance, please contact your city office, waste
disposal service or the shop where you purchased
the product.

This product is manufactured to comply with the
EEC DIRECTIVE 89/336/EEC, 93/68/EEC and
2006/95/EC.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK

OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

Safety Precaution

WARNING: TO PREVENT FIRE OR ELECTRIC

SHOCK HAZARD, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.

POWER SAVE MODE

You can set up the unit into an economic power save mode.
In power-on status, press and hold

1

(POWER) button for about

3 seconds.

- Nothing is displayed in the display window when the unit
goes into the power save mode.

To cancel power save mode, press 1(POWER).

3

Before use

Contents

Before use

About the Symbols for instruction /

Notes on Discs . . . . . . . . . . . . . . . . . . . . .3

Front / Back Panel . . . . . . . . . . . . . . . . . .4

Remote Control . . . . . . . . . . . . . . . . . . . . .5

Connections

Speaker System Connection /

Auxiliary Function . . . . . . . . . . . . . . . . . . .6

Antenna (Aerial) Connections . . . . . . . . . .7

Operation

USB Function . . . . . . . . . . . . . . . . . . . . . . .7

Setting the Clock / Timer Function

/

Sleep Timer Function . . . . . . . . . . . . . . . .8

Audio Adjustment . . . . . . . . . . . . . . . . . . .9

Presetting the Radio Stations /

Listening to the Radio . . . . . . . . . . . . . . .10

RDS Function - OPTIONAL . . . . . . . . . . .11

CD Playback . . . . . . . . . . . . . . . . . . . . . .12

To Program Play /

About MP3/WMA . . . . . . . . . . . . . . . . . .13

Reference

Troubleshooting . . . . . . . . . . . . . . . . . . .14

Specifications . . . . . . . . . . . . . . . . . . . . .15

About the symbols for
instruction

Indicates hazards likely to cause harm to
the unit itself or other material damage.

Indicates special notes and operating
features.

Notes on Discs

Handling discs

Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints do not
get on the surface. Never stick paper or tape on
the disc.

Storing discs

After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of
heat and never leave it in a parked car exposed
to direct sunlight.

Cleaning discs

Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before play­ing, clean the disc with a clean cloth. Wipe the
disc from the center out.

Do not use strong solvents such as alcohol,
benzine, thinner, commercially available
cleaners, or anti-static spray intended for older
vinyl records.

Before use

Note

Precautions in using the touch buttons

• Use the touch buttons with clean and dry
hands.

- In a humid environment, wipe out any

moisture on the touch buttons before using.

• Do not press the touch buttons hard to make it
work.

- If you apply too much strength, it can

damage the sensor of the touch buttons.

• Touch the button that you want to work in order
to operate the function correctly.

• Be careful not to have any conductive material
such as metallic object on the touch buttons,

and it can cause malfunctions.

The manual largely contains detailed
explanation items about how to operate
the unit with the remote control.

3

7

6

8

1

2

12

13

17

18

19

21

22

20

Front / Back Panel

1.1 (POWER)

2. VOLUME*

3. FUNC. (FUNCTION)
(FM, AM, CD, USB, AUX)

4. .(SKIP)
TUN. (-) (TUNER)

5. XTS pro

6.x(STOP)
MO./ ST. (MONO/ STEREO)

7. DISC TRAY

8. EQ master/ DEMO button

9. CLOCK button

10. TIMER button

11. SET/ RDS(OPTIONAL) button

12. Display window

13.BB/[](PLAY/PAUSE)

14. XDSS plus/ (MP3 Optimizer)

15. > (SKIP)

TUN. (+) (TUNER)

16. Z (OPEN/CLOSE)

17. USB connector

18. PHONES
(Headphone jack : 3.5mm)

19. Power cord

20. Antenna terminal

21. AUX IN (Auxiliary input) connector

22. Speaker terminal

*VOLUME Adjustment

4

5

16

14

15

4

9

10
11

Move your finger around
the touch wheel.

OPEN

Before use

5

Remote Control battery installation

Detach the battery cover
on the rear of the remote
control and insert two R03
(size AAA) batteries with
3 and # aligned correctly.

Caution

: Do not mix old and new batteries. Never

mix different types of batteries (standard,
alkaline, etc.).

Remote Control Operation Range

Point the remote control at the remote sensor
and press the buttons.

• Distance : About 23 ft (7 m) from the front of
the remote sensor.

• Angle : About 30° in each direction of the
front of the remote sensor.

Remote Control

AAA

AAA

DISP.MODE (DISPLAY MODE) button

POWER button

PRESET/ FOLDER ( ) buttons

SLEEP button

PLAY/PAUSE (BB/[]) button •

STOP (x)/ MO./ST. button •

SKIP/ SEARCH •

(.

bbbb/ BBBB

>) buttons

TUN. (-/+) buttons •

REPEAT button •

RDS (Radio Data System) FUNCTION

buttons

RDS button : OPTIONAL •

PTY button : OPTIONAL •

PTY SEARCH button : OPTIONAL •

NUMERIC buttons

DIMMER button

MUTE button

• USB button

• FUNCTION button

VOLUME CONTROL( ) buttons

CLOCK button

PROGRAM/ MEMO button

D.SKIP button

• EQ master button

• XDSS plus button

• XTS Pro button

• RANDOM button

MP3 Info button
(MP3/ WMA file information display)

3#