OWNER’S MANUAL
COMMERCIAL WASHER
Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the washer is installed correctly and safely.
Leave these instructions near the washer after installation for future reference.
MODEL
F1069FD2S/F1069FD3S
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
www.lg.com |
P/No.: MFL67360462 |
2 PRODUCT FEATURES
PRODUCT FEATURES
DIRECT DRIVE SYSTEM
The advanced Brushless DC motor directly drives the drum without using a belt and pulley.
TILTED DRUM AND EXTRA LARGE DOOR OPENING
The tilted drum and extra large opening make it possible to load and unload clothing more easily.
ULTRA CAPACITY
The larger drum enables more tumbling action and greater centrifugal force, but also less tangling and wrinkling of the laundry. Heavier loads, such as king size comforters, blankets, and curtains, can be washed.
SEE-THROUGH DOOR AND BIG DOOR
You can see the laundry throughout the cycle.
MAGNETIC DOOR PLUNGER
Safely and conveniently secure the door slightly ajar with the magnetic door plunger. This will promote air circulation and allow the interior of the machine to dry. To use this feature, after the load has been removed, do not close the door completely. When the magnetic door plunger comes into contact with the metal washer cabinet, it will secure the door slightly open allowing the interior of the washer to dry.
STAINLESS STEEL DRUM
IMPORTANT SAFETY INSTRUCTIONS 3
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Warning
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.
Your Safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word DANGER, WARNING or CAUTION. These words mean:
DANGER
You will be killed or seriously injured if you don’t immediately follow instructions.
Warning
You can be killed or seriously injured if you don’t follow instructions.
CAUTION
You may be slightly injured or cause damage to the product if you do not follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.
4 IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Warning
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.
BASIC SAFETY PRECAUTIONS
Warning
To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions, including the following:
•Read all instructions before using the washer.
•Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode.
•Do not add gasoline, dry cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.
•Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using the washing machine, turn on all hot water faucets and
let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.
•Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used near children.
•Before the washer is removed from service or discarded, remove the door to prevent children from hiding inside.
•Do not install or store the washer where it will be exposed to the weather.
•Do not tamper with the controls.
•Do not repair or replace any part of the washer or attempt any servicing unless specifically recommended in the user-maintenance instructions or published user-repair instructions that you understand and have the skills to carry out.
•See Installation Instructions for grounding requirements.
•ALWAYS follow the fabric care instructions supplied by the garment manufacturer.
•Do not place items exposed to cooking oil in your washer.
Items contaminated with cooking oils may contribute to a chemical reaction that could cause a load to catch fire.
•Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
•Do not use an adapter or extension cord.
•Do not remove ground prong.
•If you don’t have the proper outlet, consult an electrician.
Warning
Improper connection of the equipment-grounding conductor can result in risk of electric shock. Consult a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet, have a proper outlet installed by a qualified electrician.
IMPORTANT SAFETY INSTRUCTIONS 5
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Warning
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR INSTALLATION
Warning
To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions, including the following:
•Refer to INSTALLATION INSTRUCTIONS for detailed grounding procedures.
Installation instructions are packed in the washer for installer's reference. If the washer is moved to a new location, have it checked and reinstalled by a qualified service person. Failure to follow this warning can cause serious injury, fire, electric shock or death.
•Do not, under any circumstances cut or remove the third (ground) prong from the power cord.
Failure to follow this warning can cause serious injury, fire, electric shock or death.
•For personal safety, this appliance must be properly grounded.
Failure to follow this warning can cause serious injury, fire, electric shock or death.
•The power cord of this appliance is equipped with a 3-prong (grounding) plug which fits a standard 3-prong (grounding) wall outlet to minimize the possibillty of electric shock hazard from this appliance.
•This washer must be plugged into a 220-240 V~, 50 Hz grounded outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.
Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•Where a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.
Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•Do not install on carpet. Install the washer on a solid floor.
Failure to follow this warning can cause serious leak damage.
•The openings must not be obstructed by a carpet.
•Do not remove the ground prong. Do not use an adapter or extension cord. Plug into a grounded 3 prong outlet.
Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•The washer should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating plate.
This provides the best performance and also prevents overloading house wiring circuits which could cause a fire hazard from overheated wires.
•Never unplug your washer by pulling on the power cord. Always grip the plug firmly and pull straight out from the outlet. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•Repair or replace all power cords that have become frayed or otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at either end.
Failure to follow this warning can cause serious injury, fire, electric shock,or death.
•When installing or moving the washer, be careful not to pinch, crush, or damage the power cord. Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•The washer must be installed and electrically grounded by a qualified service person in accordance with local codes, to prevent shock hazard and assure stability during operation.
•The washer is heavy. Two or more people are needed to install and move the appliance.
Failure to do so can result in back or other injury
•Store and install the washer where it will not be exposed to temperatures below freezing or exposed to outdoor weather conditions.
Failure to follow this warning can cause serious leak damage.
•Do not install the washer in humid spaces to reduce the risk of electric shock.
Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•To reduce the risk of injury to persons, adhere to all industry recommended safety procedures including the use of long sleeved gloves and safety glasses. Failure to follow all of
the safety warnings in this manual could result in property damage, injury to persons or death.
•Keep the area underneath and around your appliances free of combustible materials such as lint, paper, rags, chemicals, etc. Failure to do so can result in fire.
6 IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
Warning
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, injury to persons, or death.
SAFETY INSTRUCTIONS FOR USE, CARE, CLEANING, AND DISPOSAL
Warning
To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions, including the following:
•Unplug the washer before cleaning to avoid the risk of electric shock.
•Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage the finish.
•Do not put oily or greasy rags or clothing on top of the washer. These substances give off vapors that could ignite the materials.
•Do not wash items that are soiled with vegetable or cooking oil. These items may contain some oil after laundering.
Due to the remaining oil, the fabric may smoke or catch fire by itself.
•Disconnect this appliance from the power supply before attempting any user maintenance.
Turning the controls to the OFF position does not disconnect this appliance from the power supply.
Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•Do not combine laundry products for use in 1 load unless specified on the label. Do not mix chlorine bleach with ammonia or acids such as vinegar.
Follow package directions when using laundry products. Incorrect usage can produce poisonous gasresulting in serious injury or death.
•Do not reach into the washer while parts are moving. Before loading, unloading, or adding items, push in the cycle selector knob and allow the drum to coast to a complete stop before reaching inside.
Failure to follow this warning can cause serious injury, fire, electric shock, or death.
•This appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
•Children should be supervised not to play with the appliance.
•Do not allow children to play on or in the washer.
Close supervision of children is necessary when the washer is used near children. As children grow, teach them the proper, safe use of all appliances.
Failure to comply with these warnings could result in serious personal injuries.
•Destroy the carton, plastic bag, and other packing materials after the washer is unpacked.
Children might use them for play.
Cartons covered with rugs, bedspreads or plastic sheets can become airtight chambers. Failure to comply with these warnings could result in serious personal injuries.
•Keep laundry products out of children's reach.
To prevent injury to persons, observe all warnings on product labels. Failure to comply with these warnings could result in serious personal injuries.
•Remove the door to the washing compartment to avoid the danger of children or small animals getting trapped inside before your washer is removed from service or discarded.
Failure to do so can result injury or death.
•Before the washer is removed from service or discarded, remove the washer door to prevent accidental entrapment.
Failure to comply with these warnings could result in serious personal injuries.
•Washing Machine is to be connected to the water mains using new hose-sets and that old hose-sets should not be used.
TABLE OF CONTENTS 7
TABLE OF CONTENTS
2 PRODUCT FEATURES
3 IMPORTANT SAFETY INSTRUCTIONS
4BASIC SAFETY PRECAUTIONS
4GROUNDING INSTRUCTIONS
5SAFETY INSTRUCTIONS FOR INSTALLATION
6SAFETY INSTRUCTIONS FOR USE, CARE, CLEANING, AND DISPOSAL
37- 6. TUB CLEAN - tCL
38MAINTENANCE
38 Care after wash
38 - Storing the Washer
38- Cleaning the Dispenser
39- Cleaning the water inlet filters
40- Cleaning the drain pump filter
41- Cleaning the door seal
8 |
INTRODUCING YOUR WASHING MACHINE |
42 |
ERROR MODE |
||
8 |
Part and Accessories |
|
|
|
|
43 |
|
||||
9 |
Control panel features |
Power Fail Recovery |
|||
|
|
||||
11 |
INSTALLATION INSTRUCTIONS |
|
|
|
|
43 |
Default washer Settings |
||||
|
|
||||
11 |
Checking and choosing the proper location |
||||
|
|
|
|||
12 |
Unpacking and removing shipping bolts |
43 |
SPECIFICATIONS |
||
13 |
Connecting the water lines |
14Connecting the drain line
15Leveling the washing machine
16PREPARATION
16Precautions for fabric care before wash cycle
17Fabric Care Labels
17Sorting laundry
18About the dispenser
18Loading the dispenser
19OPERATING YOUR Washer
20PROGRAMMING MODE
21OPL type -Structure of Programming mode
22Programming mode - Setup Mode
22 - 1. How to enter the FEA1
24- 1-1. Pre-wash set up
25- 2. Washing time set up
26- 3. Rinsing times per cycle
27- 4. Rinsing time setup
28- 5. Top spin speed – final spin time depends on RPM
29- 6. How to change the water level
30- 7. Beep volume
31- 8. How to enter the TYPE
32Programming Mode - Test mode
32- 1. LqC1
33- 2. Factory reset -EEPt
34- 3. Time set up
35- 4. Cycle Kill
36- 5. PASSWORD - PASS
8 INTRODUCING YOUR WASHING MACHINE
INTRODUCING YOUR WASHING MACHINE
Parts and Accessories
Parts
Detergent dispenser
drawer
Control panel
Door |
Door |
|
|
||
Magnet Door |
seal |
|
Tub |
||
Plunger |
||
|
||
(see page 2) |
|
Leveling feet
Drain pump filter cover Drain pump filter Drain hose
Water inlets
Shipping |
Power cord |
|
bolts |
||
|
||
|
Drain hose |
Accessories
Hot and Cold |
Non-skid pads |
Caps (4) |
|
(for covering shipping bolt holes) |
|||
Water Hoses |
|
||
|
|
Wrench |
|
|
(for removing |
|
|
shipping bolts and adjusting |
Tie Strap |
Elbow Bracket |
leveling feet) |
(for securing drain hose) |
(for securing drain hose) |
INTRODUCING YOUR WASHING MACHINE 9
Control panel features
OPL type
- Side by side & Stack (F1069FD3S, F1069FD2S)
5 |
1 |
2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 |
|
|
3 |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Optional function button |
||
1. |
Display LED |
4. |
Start button |
||||||||||||||||||||||||||
2. |
Cycle button |
5. |
Status LED |
||||||||||||||||||||||||||
3. |
Optional cycle button |
|
|
|
|
|
|
10 INTRODUCING YOUR WASHING MACHINE
Status LED |
Display LED |
Cycle button |
Start button Optional function button
Display LED |
Optional function button |
The display shows the vend price and remaining time and |
RINSE+SPIN |
programming options. Error codes are also displayed here. |
Rinse,drain and spin only |
|
Use this cycle to rinse detergent form load |
Cycle button
Press the CYCLE button to select the desired cycle based on laundry types and conditions.
90°C MEDICAL
Use it for the more medical wash than 75°C HOT such as white clothes, baby clothes, sheets and underwear.
75°C HOT
Use it for heavy soiled fabrics such as white clothes, baby clothes, sheet and underwear.
60°C NORMAL
Use it for heavy soiled fabrics such as baby wear, underwear and white clothes.
40°C NORMAL
Start button
The START LED flashes when the full vend price has been satisfied and the cycle has been chosen.
Status LED
LED |
Description |
LED flashes whenever the washing cycle is in operation.
LED flashes whenever the Rinsing cycle is in operation.
LED flashes whenever the Spining cycle is in operation.
flashes whenever the door lock is activated.
Use it for normal soiled fabrics such as cotton, linen, towels, shirts and jeans.
INSTALLATION INSTRUCTIONS 11
INSTALLATION INSTRUCTIONS
Checking and choosing the proper location
Install the washing machine on a solid floor that is strong and rigid enough to support the weight of the washing machine, even when fully loaded, without flexing or bouncing. If the floor has too much flex, you may need to reinforce it to make it more rigid. If the floor is not solid, it may cause severe vibration and noise.
1Clean the floor before installation.
- Make sure to select solid and smooth ground.
2Two or more people are needed for moving and unpacking the washing machine.
3Allow for sufficient space between the walls and the washing machine for installation.
Space requirements
You must allow sufficient space for water lines, the drain line, and airflow.
NOTE
•Be sure to allow for wall, door, or floor moldings that may increase the required clearances.
Installing on a floor
221/4” |
(57 cm) |
|
|
|
|
|
293/4” |
|
|
|
|
|
|
|
4” |
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
(75.6 cm) |
|
|
|
(10 cm) |
|||||||
|
|
|
|
|
51” |
|
|
|
|
|
|
|
|
|
|
|
|
(129.7 cm) |
|
|
|
|
|
|
1” |
27” |
1” |
(2.5 cm) |
(68.6 cm) |
(2.5 cm) |
NOTE
•The floor must be strong and rigid enough to support the weight of the washer, when fully loaded, without flexing or bouncing. If your floor has too much flex, you may need to reinforce it to make it more rigid.
A floor that is adequate for a top-loading washer may not be rigid enough for a front loading washer, due to the difference in the spin speed and direction. If the floor is not solid, your washer may vibrate and you may hear and feel the vibration throughout your house.
•Before installing the washer, make sure the floor is clean, dry and free of dust, dirt, water and oils so the washer feet can not slide easily. Leveling feet that can move or slide on the floor can contribute to excess vibration and noise due to poor contact with the floor.
12 INSTALLATION INSTRUCTIONS
Unpacking and removing shipping bolts
When removing the washer from the carton base, be sure to remove the foam drum support in the middle of the carton base.
If you must lay the washer down to remove the base packaging materials, always lay it carefully on its side. DO NOT lay the washer on its front or back.
1Remove the bottom two shipping bolts with the wrench (included) to fully loosen all four shipping bolts by turning them counterclockwise and then pulling them out.
Retainer
Shipping
bolt
2Locate the four hole caps included in the accessory pack and install them in the shipping bolt holes.
Foam Tub Support |
Carton Base |
Cap
NOTE
• Save the bolt assemblies for future use. To prevent damage to internal components, DO NOT transport the washer without reinstalling the shipping bolts.
• Failure to remove shipping bolts and retainers may cause severe vibration and noise, which can lead to permanent damage to the washer. The cord is secured to the back of the washer with a shipping bolt to help prevent operation with shipping bolts in place.
INSTALLATION INSTRUCTIONS 13
Connecting the water lines
1Check the rubber seals on both sides of the hose.
-Insert a rubber seal into the threaded fittings on each hose to prevent leaking.
Rubber seal
Water hose
(To water inlet on the washing machine)
Rubber seal
Water hose (To faucet)
2Connect the water supply hoses to the HOT and COLD water faucets tightly by hand and then tighten another 2/3 turn with pliers.
-Connect the blue hose to a cold water faucet and the red hose to a hot water faucet.
WARNING
• Do not overtighten. Damage to the coupling can result.
3After connecting inlet hose to water faucets, turn on the water faucets to flush out foreign substances (dirt, sand or sawdust) in the water lines. Let water drain into a bucket, and check the water temperature.
4Connect the hoses to the water inlets tightly by hand and then tighten another 2/3 turn with pliers.
-Connect the blue hose to the cold water inlet and the red hose to the hot water inlet.
Cold |
Hot water |
inlet |
|
water |
|
inlet |
|
WARNING
•Do not overtighten the hoses.
Overtightening can damage the valves resulting in leaking and property damage.
5Check for leaks by turning on the faucets.
-If water leaks, check steps 1 to 4 again.
NOTE
•For your safety, and for extended product life, use only authorized components. The manufacturer is not responsible for product malfunction or accidents caused by the use of separately purchased unauthorized parts.
•Use new hoses when you install the washing machine.
Do not reuse old hoses. Use only the inlet hoses provided with the washer. LG does not recommend the use of aftermarket hoses.
•Periodically check the hoses for cracks, leaks and wear, and replace the hoses every 5 years.
•Do not stretch the water hoses intentionally, and make sure that they are not crushed by other objects.
•Water supply pressure must be between 14.5 PSI and
116 PSI (100~800 kPa). If the water supply pressure is more than 116 PSI, a pressure reducing valve must be installed.
•To provide optimum washing performance the hot water temperature should be set at 120-135°F (48-57°C) and the cold at 60°F (15°C).
14 INSTALLATION INSTRUCTIONS
Connecting the drain line
Secure the drain hose in place to prevent moving and leaking.
NOTE
•The drain hose should be properly secured. Failure to properly secure the drain hose can result in flooding and malfunction.
•Total height of the house end should not exceed 96 inches (244.8 cm) from the bottom of the washer.
•The drain must be installed in accordance with any applicable local codes and regulations.
•Make sure that the water lines are not stretched, pinched, crushed, or kinked.
Using a standpipe
1Clip the end of the hose into the elbow bracket.
-Connect the elbow bracket within 4 inches (10 cm) from the end of the drain hose. If the drain hose is extended more than 4 inches (10 cm) beyond the end of the elbow bracket, mold or microorganisms could spread to the inside of the washer.
No more than 4 inches (10 cm)
Elbow Bracket
2 Insert the end of the drain hose into the standpipe.
Elbow Bracket
Using a laundry tub
1Clip the end of the hose into the elbow bracket.
-Connect the elbow bracket within 4 inches (10 cm) from the end of the drain hose. If the drain hose is extended more than 4 inches (10 cm) beyond the end of the elbow bracket, mold, or microorganisms could spread to the inside of the washer.
No more than 4 inches (10 cm)
Elbow Bracket
2Hang the end of the drain hose over the side of the laundry tub.
Elbow
Bracket
Laundry Tub
max. 96” |
|
(2.4 m) |
max. 96” |
|
|
|
(2.4 m) |
Drain Hose
Tie Strap
3 Use a tie strap to secure the drain hose in place.
Drain Hose
3 Use a tie strap to secure the drain hose in place.