OWNER’S MANUAL
ENGLISH
LCD MONITOR
Please read this manual carefully before operating
your set and retain it for future reference.
LCD MONITOR MODELS
E1940S/E1940T
E2040S/E2040T
E2240S/E2240T
E2340S/E2340T
www.lg.com
Important Precautions
This unit has been engineered and manufactured to ensure your personal safety,
however improper use may result in potential electrical shock or fire hazards. In
order to allow the proper operation of all safeguards incorporated in this display,
observe the following basic rules for its installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. If you use another power cord,
make sure that it is certified by the applicable national standards when not
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of this
manual or listed on the display. If you are not sure what type of power supply you
have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your
service technician for replacement.
As long as this unit is connected to the AC wall outlet, it is not disconnected from
the AC power source even if the unit is turned off.
Do not Open the Display:
There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw any toys
or objects on the product screen.
It can cause injury to human, problem to product and damage the display.
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time, unplug
it from the wall outlet.
In the presence of thunder and lightning, never touch the power cord and signal
cable because it can be very dangerous. It can cause electric shock.
1
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
Leaving a fixed image on the screen for a long time may cause damage to the
screen and cause image burn-in. Make sure to use a screen saver on the product.
Burn-in and related problems are not covered by the warranty on this product.
Do not shock or scratch the front and sides of the screen with metallic objects.
Otherwise, it may cause damage to the screen.
Make sure the panel faces forward and hold it with both hands to move. If you
drop the product, the damaged product can cause electric shock or fire. Contact
an authorized the service center for repair.
Avoid high temperatures and humidity.
2
Important Precautions
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
When cleaning the product, unplug the power cord and scrub gently with a soft
cloth to prevent scratching. Do not clean with a wet cloth or spray water or other
liquids directly onto the product. An electric shock may occur. (Do not use
chemicals such as benzene, paint thinners or alcohol)
Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;
wipe in one direction only. Too much moisture may cause staining.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On Disposal (Only , Hg lamp used LCD Monitor)
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
3
Accessories
!!! Thank for selecting LGE products !!!
Please make sure the following items are included with your
monitor. If any items are missing, contact your dealer.
User's Guide/Cards
Power Cord
(Depending on the country)
DVI-D Signal Cable
(This feature is not available in
all countries.)
AC-DC adapter
15-pin D-Sub Signal Cable
(To set it up, this signal cable may be
attached to this product before
shipping out.)
or
AC-DC adapter
(Depending on the country)
NOTE
This accessories may look different from those shown here.
User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite
cores to maintain standard compliance for the product.
4
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor,
the computer system, and other attached devices is turned off.
Connecting the stand
1. Place the monitor with its front facing downward on
a soft cloth.
2.
Check the direction of the Stand Base,
and connect it into the Stand Body.
Stand Body
Stand Base
Use a coin on the back of the stand
base and turn the screw clockwise to
tighten.
or
3. Once assembled take the monitor up carefully and face the front side.
Important
This illustration depicts the general model of connection. Your monitor may differ from the
items shown in the picture.
Do not carry the product upside down holding only the stand base. The product may fall and
get damaged or injure your foot.
5
Connecting the Display
Disassembling the stand
1. Place the monitor with its front facing downward on
a soft cloth.
2.
Nip Latch inside, Take off the stand base
from stand body.
When you desire to disintegrate the
monitor from the stand base, use a coin
to turn the screw counterclockwise.
or
6
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor,
the computer system, and other attached devices is turned off.
Positioning your display
-After installation, adjust the angle as shown below.
1. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -5˚ to 15˚
15
Do not touch or press the screen when
adjusting the angle of the monitor.
When adjusting the angle of the screen, do
not put your finger(s) in between the head of
the monitor and the stand body. You can
hurt your finger(s).
ERGONOMIC
It is recommended that in order to maintain an ergonomic and comfortable viewing position,
the forward tilt angle of the monitor should not exceed 5 degrees.
7
Connecting the Display E1940T/E2040T/E2240T/E2340T
Connecting with the PC
1. Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
2.
Connect signal input cable and power cord in order, then tighten the screw
of the signal cable.
A
Connect DVI-D(Digital signal) Cable
B
Connect D-sub(Analog signal) Cable
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
Varies according to model.
1
2
When using a D-Sub signal input cable connector
for Macintosh
Mac adapter : For Apple Macintosh use, a
separate plug adapter is needed to change the
15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin 2
row connector.
Wall-outlet type
DVI-D (This feature is not available in all countries.)
3. Press the power button on the front panel to turn the power on. When monitor power is
turned on, the 'Self Image Setting Function' is executed automatically.
(Only Analog Mode)
Power Button
NOTE
‘ Self Image Setting Function’? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically adjusts
the display to optimal settings for individual input signals.
‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen
flicker or tilted screen while using the device or after changing screen resolution, press the
AUTO function button to improve resolution.
8
Connecting the Display E1940S/E2040S/E2240S/E2340S
A
Connecting with the PC
1. Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
2.
Connect signal input cable and power cord in order, then tighten the screw
of the signal cable.
A
Connect D-sub(Analog signal) Cable
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
Varies according to model.
1
2
When using a D-Sub signal input cable connector for
Macintosh
Mac adapter : For Apple Macintosh use, a
separate plug adapter is needed to change the
15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin 2
row connector.
Wall-outlet type
3. Press the power button on the front panel to turn the power on. When monitor power is
turned on, the 'Self Image Setting Function' is executed automatically.
Power Button
NOTE
‘ Self Image Setting Function’? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically adjusts
the display to optimal settings for individual input signals.
‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen
flicker or tilted screen while using the device or after changing screen resolution, press the
AUTO function button to improve resolution.
9
Control Panel Functions E1940T/E2040T/E2240T/E2340T
Front Panel Controls
MENU Button
MODE Button
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message
"OSD UNLOCKED" should appear.
Use this button to enter F-ENGINE, ORIGINAL RATIO,
PHOTO EFFECT menus.
For more information, refer to page 21.
10
Control Panel Functions
AUTO Button
INPUT Button
(SOURCE Hot key)
EXIT Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO button before entering the On Screen
Display(OSD). (Only Analog Mode)
This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).
The best display mode is
E1940T : 1360 x 768
E2040T : 1600 x 900
E2240T/E2340T : 1920 x1080
When two input signals are connected, you can select the
input signal (D-SUB/DVI) you want. When only one signal
is connected, it is automatically detected. The default
setting is D-Sub.
Exit the OSD(On Screen Display).
Power Button &
Power Indicator
Use this button to turn the display on or off.
The power indicator stays white if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking white.
11
Control Panel Functions E1940S/E2040S/E2240S/E2340S
Front Panel Controls
MENU Button
MODE Button
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message
"OSD UNLOCKED" should appear.
Use this button to enter F-ENGINE, ORIGINAL RATIO,
PHOTO EFFECT menus.
For more information, refer to page 21.
12
Control Panel Functions
AUTO Button
EXIT Button
Power Button &
Power Indicator
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO button before entering the On Screen
Display(OSD). (Only Analog Mode)
This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).
The best display mode is
E1940S : 1360 x 768
E2040S : 1600 x 900
E2240S/E2340S : 1920 x1080
Exit the OSD(On Screen Display).
Use this button to turn the display on or off.
The power indicator stays white if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking white.
13
On Screen Display (OSD) Control Adjustment E1940T/E2040T/E2240T/E2340T
Screen Adjustment
Making adjustments to the image size, position and operating
parameters of the display is quick and easy with the On Screen
Display Control system.
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the discretionary Button, then the main menu of the OSD appears.
1
To access a control, use the corresponding Buttons.
2
Use the / Buttons to adjust the image to the desired level.
3
Use the Button to select other sub-menu items.
Press the EXIT Button to exit from the OSD.
4
14
On Screen Display (OSD) Control Adjustment E1940S/E2040S/E2240S/E2340S
Screen Adjustment
Making adjustments to the image size, position and operating
parameters of the display is quick and easy with the On Screen
Display Control system.
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the discretionary Button, then the main menu of the OSD appears.
1
To access a control, use the corresponding Buttons.
2
Use the / Buttons to adjust the image to the desired level.
3
Use the Button to select other sub-menu items.
Press the EXIT Button to exit from the OSD.
4
15
On Screen Display(OSD) Selection and Adjustment
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
: D-SUB(Analog signal) input
DSUB
: DVI-D(Digital signal) input
DVI-D
Main menu Sub-menu
PICTURE
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
COLOR TEMP
(PRESET / USER)
GAMMA
DISPLAY
HORIZONTAL
VERTICAL
CLOCK
PHASE
OTHERS
LANGUAGE
POWER INDICATOR
WHITE BALANCE
FACTORY RESET
MODE
F-ENGINE
ORIGINAL
RATIO
PHOTO
EFFECT
NORMAL
MOVIE
INTERNET
DEMO
WIDE
ORIGINAL
NORMAL
GAUSSIAN BLUR
SEPIA
MONOCHROME
Supported input
DSUB
DVI-D
DSUB
DVI-D
DSUB
To adjust the brightness, contrast
and sharpness of the screen
To customize the color of the
screen
To adjust the position of the
screen
DSUB
To improve the clarity and
stability of the screen
DSUB
DVI-D
To customize the screen status
for a user's operating
environment
DSUB
DSUB
DVI-D
DSUB
DVI-D
DSUB
DVI-D
DSUB
DVI-D
To select or customize desired
image settings
To adjust the image size
To adjust the screen color mode
Description
NOTE
The order of icons may differ depending on the model (16~24).
16
On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
E1940T/E2040T/E2240T/E2340T
E1940S/E2040S/E2240S/E2340S
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
Icons
Submenus
Button
Exit
Adjust (Decrease/Increase)
Select another sub-menu
Restart to select sub-menu
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Tip
17
On Screen Display(OSD) Selection and Adjustment
Main menu Sub menu Description
E1940T/E2040T/E2240T/E2340T
BRIGHTNESS
To adjust the brightness of the screen.
E1940S/E2040S/E2240S/E2340S
Exit : Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
CONTRAST
SHARPNESS
COLOR TEMP
PRESET
To adjust the contrast of the screen.
To adjust the clearness of the screen.
Select the screen color.
• sRGB: Set the screen color to fit the
sRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
Exit : Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
USER
GAMMA
RED
Set your own red color levels.
GREEN
Set your own green color levels.
BLUE
Set your own blue color levels.
Set your own gamma value. : 0 / 1 / 2
On the monitor, high gamma values
display whitish images and low
gamma values display blackish
images.
18
On Screen Display(OSD) Selection and Adjustment
Main menu Sub menu Description
E1940T/E2040T/E2240T/E2340T
HORIZONTAL
To move image left and right.
E1940S/E2040S/E2240S/E2340S
Exit : Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
VERTICAL
CLOCK
PHASE
To move image up and down.
To minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
To adjust the focus of the display.
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
19
On Screen Display(OSD) Selection and Adjustment
Main menu Sub menu Description
E1940T/E2040T/E2240T/E2340T
E1940S/E2040S/E2240S/E2340S
Exit : Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
LANGUAGE
POWER
INDICATOR
WHITE
BALANCE
FACTORY
RESET
To choose the language in which the
control names are displayed.
Use this function to set the power
indicator on the front side of the monitor
to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
If the output of the video card is
different the required specifications,
the color level may deteriorate due
to video signal distortion. Using this
function, the signal level is adjusted
to fit into the standard output level of
the video card in order to provide the
optimal image.
Activate this function when white
and black colors are present in the
screen.
Restore all factory default settings except
"LANGUAGE."
Press the , buttons to reset
immediately.
NOTE
If this does not improve the screen image, restore the factory default settings. If necessary, execute the
WHITE BALANCE function again. This function will be enabled only when the input signal is an analog
signal.
20
On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
E1940T/E2040T/E2240T/E2340T
E1940S/E2040S/E2240S/E2340S
Press the MODE Button, then the main menu of the OSD appears.
Menu Name
Icons
Submenus
Button
Exit
Adjust (Decrease/Increase)
Select another sub-menu
Restart to select sub-menu
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
Tip
21
On Screen Display(OSD) Selection and Adjustment
Main menu Sub menu Description
NORMAL
MOVIE
INTERNET
Select this when you want to use the product
in the most general using environment.
Select this when you are watching a video or
movie.
Select this when you are working on the
document (Word etc.)
Exit : Exit
,
: Move
: Restart to select sub-menu
DEMO
This is used for advertising in the store. The
screen will be divided to show the standard
mode on the left and video mode on the right so
that the consumers can check the difference
after applying the video mode.
22
On Screen Display(OSD) Selection and Adjustment
Main menu Sub menu Description
Exit : Exit
,
: Move
: Restart to select sub-menu
WIDE
ORIGINAL
Switch to full screen mode according to
input image signal.
Change the input image signal ratio to
original.
* This function works only if input
resolution is lower than monitor ratio
(16:9).
23
On Screen Display(OSD) Selection and Adjustment
Main menu Sub menu Description
NORMAL
GAUSSIAN
BLUR
SEPIA
The PhotoEffect function is disabled.
This menu changes the screen to be more
colorful and smoother.
This menu changes the screen to be
Sepia tone (brown color).
Exit : Exit
,
: Move
: Restart to select sub-menu
MONOCH
-ROME
This menu changed the screen to be
Gray tone(black-and-white Picture) .
24
Troubleshooting
Check the following before calling for service.
No image appears
No image appears
● Is the power cord of the
display connected?
● Is the power indicator
light on?
● Is the power indicator
blinking?
● Do you see an "OUT OF
RANGE" message on
the screen?
● Do you see a "CHECK
SIGNAL CABLE"
message on the
screen?
•
Check and see if the power cord is connected
properly to the power outlet.
•
Press the Power button.
•
If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC
•
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
•
This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
.
Do you see a "OSD LOCKED" message on the screen?
Do you see “OSD
●
LOCKED” when you
push MENU button?
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENU button for several
seconds: the message
“OSD UNLOCKED” will appear.
25
Troubleshooting
Display image is incorrect
● Display Position is
incorrect.
● On the screen
background, vertical
bars or stripes are
visible.
● Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
•
Press the AUTO button to automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.
•
Press the AUTO button to automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.
•
Press the AUTO button to automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
•
Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
IMPORTANT
Check Control Panel --> Display --> Settings and see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be
blurred and the screen may be dimmed, truncated or biased. Make sure to select
the recommend resolution.
The setting method can differ by computer and O/S (Operation System),
and resolution mentioned above may not be supported by the video card
performance. In this case, please ask to the computer or the video card
manufacturer.
26
Troubleshooting
Display image is incorrect
● The screen color is
mono or abnormal.
● The screen blinks.
•
Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
•
Make sure the video card is properly inserted in
the slot.
Set the color setting higher than 24 bits (true color)
•
at Control Panel - Settings.
•
Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?
●
Have you installed the
display driver?
•
Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
•
Make sure to check if the video card supports
Plug&Play function.
27
Specifications E1940T
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
& Weight
47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size :
0.300 mm x 0.300 mm (Pixel pitch)
Horizontal Freq. 30 kHz to 61 kHz (Automatic)
Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Max VESA 1360 x 768 @60 Hz
Recommend VESA 1360 x 768 @60 Hz
DDC 2B(Digital),DDC2AB(Analog)
On Mode
Sleep Mode ≤ 1 W
Off Mode ≤ 0.5 W
With Stand
Width 46.34 cm (18.24 inch)
Height 37.35 cm (14.70 inch)
Depth 17.40 cm (6.85 inch)
Weight(excl. packing) 2.4 kg (5.29 lb)
47.0
cm
Composite, Digital
DVI-D Connector (Digital)
:
17 W(Typ.)
Without Stand
Width 46.34 cm (18.24 inch)
Height 30.20 cm (11.89 inch)
Depth 4.3 cm (1.69 inch)
Range
Power Input
AC-DC Adapter
Environment
al Conditions
Stand Base
Power cord
NOTE
Information in this document is subject to change without notice.
Tilt : -5˚ to 15˚
12 V 2.0 A
Type ADS-24S-12 1224G*, manufactured by HONOR Electronic
or type MU24-B120200-xx, manufactured by LEADER Electronics
or type ADS-24NP-12-1 12024G, manufactured by HONOR Electronic
or type DSA-36W-12 1 24, manufactured by DEE VAN Electronics
Operating Conditions
Temperature 10 ˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20 ˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type
28
Specifications E1940S
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
& Weight
Range
47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size :
0.300 mm x 0.300 mm (Pixel pitch)
Horizontal Freq. 30 kHz to 61 kHz (Automatic)
Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)
Max VESA 1360 x 768 @60 Hz
Recommend VESA 1360 x 768 @60 Hz
DDC 2AB
On Mode
Sleep Mode ≤ 1 W
Off Mode ≤ 0.5 W
With Stand
Width 46.34 cm (18.24 inch)
Height 37.35 cm (14.70 inch)
Depth 17.40 cm (6.85 inch)
Weight(excl. packing) 2.4 kg (5.29 lb)
Tilt : -5˚ to 15˚
47.0
cm
Composite
:
17 W(Typ.)
Without Stand
Width 46.34 cm (18.24 inch)
Height 30.20 cm (11.89 inch)
Depth 4.3 cm (1.69 inch)
Power Input
AC-DC Adapter
Environment
al Conditions
Stand Base
Power cord
NOTE
Information in this document is subject to change without notice.
12 V 2.0 A
Type ADS-24S-12 1224G*, manufactured by HONOR Electronic
or type MU24-B120200-xx, manufactured by LEADER Electronics
or type ADS-24NP-12-1 12024G, manufactured by HONOR Electronic
or type DSA-36W-12 1 24, manufactured by DEE VAN Electronics
Operating Conditions
Temperature 10 ˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20 ˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type
29
Specifications E2040T
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
& Weight
Range
50.8 cm (20.0 inch) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size :
0.2766 mm x 0.2766 mm (Pixel pitch)
Horizontal Freq. 30 kHz to 83 kHz (Automatic)
Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Max VESA 1600 x 900 @ 60 Hz
Recommend VESA 1600 x 900 @ 60 Hz
DDC 2B(Digital),DDC2AB(Analog)
On Mode
Sleep Mode ≤ 1 W
Off Mode ≤ 0.5 W
With Stand
Width 49.68 cm (19.56 inch)
Height 39.11 cm (15.40 inch)
Depth 20.2 cm (7.95 inch)
Weight(excl. packing) 2.48 kg (5.46 lb)
Tilt : -5˚ to 15˚
50.8
cm
Composite, Digital
DVI-D Connector (Digital)
21 W(Typ.)
:
Without Stand
Width 49.68 cm (19.56 inch)
Height 31.96 cm (12.58 inch)
Depth 4.35 cm (1.71 inch)
Power Input
AC-DC Adapter
Environment
al Conditions
Stand Base
Power cord
NOTE
Information in this document is subject to change without notice.
12 V 2.0 A
Type ADS-24S-12 1224G*, manufactured by HONOR Electronic
or type MU24-B120200-xx, manufactured by LEADER Electronics
or type ADS-24NP-12-1 12024G, manufactured by HONOR Electronic
or type DSA-36W-12 1 24, manufactured by DEE VAN Electronics
Operating Conditions
Temperature 10 ˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20 ˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type
30
Specifications E2040S
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
& Weight
Range
50.8 cm (20.0 inch) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size :
0.2766 mm x 0.2766 mm (Pixel pitch)
Horizontal Freq. 30 kHz to 83 kHz (Automatic)
Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)
Max VESA 1600 x 900 @ 60 Hz
Recommend VESA 1600 x 900 @ 60 Hz
DDC 2AB
On Mode
Sleep Mode ≤ 1 W
Off Mode ≤ 0.5 W
With Stand
Width 49.68 cm (19.56 inch)
Height 39.11 cm (15.40 inch)
Depth 20.2 cm (7.95 inch)
Weight(excl. packing) 2.48 kg (5.46 lb)
Tilt : -5˚ to 15˚
50.8
cm
Composite
:
21 W(Typ.)
Without Stand
Width 49.68 cm (19.56 inch)
Height 31.96 cm (12.58 inch)
Depth 4.35 cm (1.71 inch)
Power Input
AC-DC Adapter
Environment
al Conditions
Stand Base
Power cord
NOTE
Information in this document is subject to change without notice.
12 V 2.0 A
Type ADS-24S-12 1224G*, manufactured by HONOR Electronic
or type MU24-B120200-xx, manufactured by LEADER Electronics
or type ADS-24NP-12-1 12024G, manufactured by HONOR Electronic
or type DSA-36W-12 1 24, manufactured by DEE VAN Electronics
Operating Conditions
Temperature 10 ˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20 ˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type
31
Specifications E2240T
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
& Weight
54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size :
0.248 mm x 0.248 mm (Pixel pitch)
Horizontal Freq. 30 kHz to 83 kHz (Automatic)
Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Max VESA 1920 x 1080 @60 Hz
Recommend VESA 1920 x 1080 @60 Hz
DDC 2B(Digital),DDC2AB(Analog)
On Mode
Sleep Mode ≤ 1 W
Off Mode ≤ 0.5 W
With Stand
Width 52.98 cm (20.86 inch)
Height 41.03 cm (16.15 inch)
Depth 20.2 cm (7.95 inch)
Weight(excl. packing) 2.8 kg (6.17 lb)
54.6
cm
Composite, Digital
DVI-D Connector (Digital)
:
23 W(Typ.)
Without Stand
Width 52.98 cm (20.86 inch)
Height 33.78 cm (13.30 inch)
Depth 4.3 cm (1.69 inch)
Range
Power Input
AC-DC Adapter
Environment
al Conditions
Stand Base
Power cord
NOTE
Information in this document is subject to change without notice.
Tilt : -5˚ to 15˚
12 V 3.0 A
Type DA-36P12, manufactured by Asian Power Device
or type FSP036-DGAA1, manufactured by FSP Electronic
or type LCAPO7E-2, manufactured by Lienchange Electronics
or type PA-1041-01IN-LF, manufactured by Lite On Electronics
Operating Conditions
Temperature 10 ˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20 ˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type
32
Specifications E2240S
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
& Weight
Range
54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size :
0.248 mm x 0.248 mm (Pixel pitch)
Horizontal Freq. 30 kHz to 83 kHz (Automatic)
Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)
Max VESA 1920 x 1080 @60 Hz
Recommend VESA 1920 x 1080 @60 Hz
DDC 2AB
On Mode
Sleep Mode ≤ 1 W
Off Mode ≤ 0.5 W
With Stand
Width 52.98 cm (20.86 inch)
Height 40.93 cm (16.11 inch)
Depth 20.2 cm (7.95 inch)
Weight(excl. packing) 2.8 kg (6.17 lb)
Tilt : -5˚ to 15˚
54.6
cm
Composite
:
23 W(Typ.)
Without Stand
Width 52.98 cm (20.86 inch)
Height 33.78 cm (13.30 inch)
Depth 4.3 cm (1.69 inch)
Power Input
AC-DC Adapter
Environment
al Conditions
Stand Base
Power cord
NOTE
Information in this document is subject to change without notice.
12 V 3.0 A
Type DA-36P12, manufactured by Asian Power Device
or type FSP036-DGAA1, manufactured by FSP Electronic
or type LCAPO7E-2, manufactured by Lienchange Electronics
or type PA-1041-01IN-LF, manufactured by Lite On Electronics
Operating Conditions
Temperature 10 ˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20 ˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type
33
Specifications E2340T
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
& Weight
58.4 cm (23 inch) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size :
0.266 mm x 0.266 mm (Pixel pitch)
Horizontal Freq. 30 kHz to 83 kHz (Automatic)
Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Max VESA 1920 x 1080 @60 Hz
Recommend VESA 1920 x 1080 @60 Hz
DDC 2B(Digital),DDC2AB(Analog)
On Mode
Sleep Mode ≤ 1 W
Off Mode ≤ 0.5 W
With Stand
Width 56.38 cm (22.20 inch)
Height 43.00 cm (16.92 inch)
Depth 20.2 cm (7.95 inch)
Weight(excl. packing) 3.16 kg (6.96 lb)
58.4
cm
Composite, Digital
DVI-D Connector (Digital)
:
28 W(Typ.)
Without Stand
Width 56.38 cm (22.20 inch)
Height 35.75 cm (14.07 inch)
Depth 4.3 cm (1.69 inch)
Range
Power Input
AC-DC Adapter
Environment
al Conditions
Stand Base
Power cord
NOTE
Information in this document is subject to change without notice.
Tilt : -5˚ to 15˚
12 V 3.0 A
Type FSP036-DGAA1, manufactured by FSP Electronic
or type LCAPO7E-2, manufactured by Lienchange Electronics
or type PA-1041-01IN-LF, manufactured by Lite On Electronics
Operating Conditions
Temperature 10 ˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20 ˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type
34
Specifications E2340S
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
& Weight
Range
58.4 cm (23 inch) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size :
0.266 mm x 0.266 mm (Pixel pitch)
Horizontal Freq. 30 kHz to 83 kHz (Automatic)
Vertical Freq. 56 Hz to 75 Hz (Automatic)
Input Form Separate Sync.
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)
Max VESA 1920 x 1080 @60 Hz
Recommend VESA 1920 x 1080 @60 Hz
DDC 2AB
On Mode
Sleep Mode ≤ 1 W
Off Mode ≤ 0.5 W
With Stand
Width 56.38 cm (22.20 inch)
Height 43.00 cm (16.92 inch)
Depth 20.2 cm (7.95 inch)
Weight(excl. packing) 3.16 kg (6.96 lb)
Tilt : -5˚ to 15˚
58.4
cm
Composite
:
28 W(Typ.)
Without Stand
Width 56.38 cm (22.20 inch)
Height 35.75 cm (14.07 inch)
Depth 4.3 cm (1.69 inch)
Power Input
AC-DC Adapter
Environment
al Conditions
Stand Base
Power cord
NOTE
Information in this document is subject to change without notice.
12 V 3.0 A
Type FSP036-DGAA1, manufactured by FSP Electronic
or type LCAPO7E-2, manufactured by Lienchange Electronics
or type PA-1041-01IN-LF, manufactured by Lite On Electronics
Operating Conditions
Temperature 10 ˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20 ˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type
35
Specifications
Preset Modes (Resolution)
E1940T/E1940S
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
1
720 x 400
2
640 x 480
3
640 x 480
4
800 x 600
5
800 x 600
6
832 x 624
7
1024 x 768
8
1024 x 768
*9
1360 x 768
E2040T/E2040S
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
1
720 x 400
2
640 x 480
3
640 x 480
4
800 x 600
5
800 x 600
6
1024 x 768
7
1024 x 768
8
1152 x 864
*9
1600 x 900
31.468
31.469
37.500
37.879
46.875
49.725
48.363
60.123
47.712
31.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
60.000
70
60
75
60
75
75
60
75
60
*Recommend Mode
70
60
75
60
75
60
75
75
60
36
*Recommend Mode
Specifications
E2240T/E2340T/E2240S/E2340S
Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz)
1
2
3
4
5
6
1024 x 768
7
1024 x 768
8
1152 x 864
9
1280 x 1024
10
1280 x 1024
11
*12
1680 x 1050
1920 x 1080
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
31.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.976
65.290
67.500
70
60
75
60
75
60
75
75
60
75
60
60
*Recommend Mode
Indicator
MODE
On Mode
Sleep Mode
Off Mode
LED Color
White
White Blinking
Off
37
Make sure to read the Important Precautions
before using the product.
Keep the O wner ’s M anual ( C D) i n an
accessible place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
EN ER GY STAR i s a set of power-saving
guidelines issued by the U.S. Environmental
Protection Agency(EPA).
As an ENERGY STAR Partner LGE U. S. A.,Inc.
has determine d that this product meets the
ENERGY STAR guidelines for energy efficiency.
Loading...