LG DTT901 User Manual [en, es]

Installation and Operating Guide | Warranty

Model Number | DTT901 | Digital TV Tuner Converter Box

With Analog Pass-Through

For service/

support Call:

Toll Free Number

1-877-9-ZENITH

(http://www.zenithservice.com)

As an ENERGY

TAR

Partner, LG has determined that this product or product models meet the E

NERGY STAR

guidelines for

energy efficiency.

NERGY

STAR

is a U.S. registered mark.

LSX300-4PM_CUSALZK_ENG_4948 7/22/08 10:41 AM Page 1

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING: Do not install this equipment in a confined space such a bookcase or similar unit.

CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface.This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction have been adhered to.

CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit;

That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

To disconnect power from the unit, pull out the units power cord from the outlet. When installing the product, ensure that the plug is easily accessible.

FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

REGULATORY INFORMATION: FCC Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the product is operated in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the product and receiver.

• Connect the product into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION:

DO NOT ATTEMPT TO MODIFY THIS PRODUCT IN ANY WAY WITHOUT WRITTEN AUTHORIZATION FROM LG ELECTRONICS CORPORATION. UNAUTHORIZED MODIFICATION COULD VOID THE USER’S AUTHORITY TO OPERATE THIS PRODUCT. THIS EQUIPMENT IS INTENDED TO RECEIVE AND DECODE SIGNALS TRANSMITTED ACCORDING TO ATSC DIGITAL TELEVISION STANDARD A/53, SPECIFICATION AND IS INTENDED TO BE USED WITH AN APPROPRIATE ANTENNA AND DISPLAY DEVICE THAT YOU MUST PROVIDE.

FCC COMPLIANCE: The responsible party for this product’s compliance is:

Marketed and Distributed by LG Electronics U.S.A., Inc., 1000 Sylvan Avenue, Englewood Cliffs, NJ. Phone: 1-201-816-2000.

Zenith-brand consumer electronics products are marketed by LG Electronics USA, Inc.

Introduction

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK

OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

LSX300-4PM_CUSALZK_ENG_4948 7/22/08 10:41 AM Page 2

Introduction

IMPORTANT SAFETY INSTRUCTIONS

Please read and observe all warnings and instructions in this owner’s manual. And those marked on the product. Retain this booklet for future reference.

PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked

on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories speci-

fied by the manufacturer.

12. Use only with the cart,

stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning

storms or when unused for long periods of time.

14.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . .4-5

Front Panel . . . . . . . . . . . . . . . . . . .4

Connection Panel Overview . . . . . .4

Remote Control Key Functions . . . .5

Installation . . . . . . . . . . . . . . . . . . . . . . . .6

Connections with TV and

over-the-air antenna . . . . . . . . . . . .6

Connecting to a VCR . . . . . . . . . . .6

Connecting to an Amplifier

(Receiver) . . . . . . . . . . . . . . . . . . . .6

Setup . . . . . . . . . . . . . . . . . . . . . . . . . . .7-12

Install Guide . . . . . . . . . . . . . . . . . .7

Menu Overview . . . . . . . . . . . . . . . .7

Typical Menu Operation . . . . . . . . .7

Setup Menu Features . . . . . . . . . . .8

Option Menu Features . . . . . . . .9-10

Lock Menu Features . . . . . . . .10-12

Operation . . . . . . . . . . . . . . . . . . . . . .13-14

Channel Selection . . . . . . . . . . . . .13

Volume Adjustment . . . . . . . . . . . .13

Signal . . . . . . . . . . . . . . . . . . . . . .13

Auto Off . . . . . . . . . . . . . . . . . . . .13

Channel Banner Display . . . . . . . .13

Simple Guide . . . . . . . . . . . . . . . .14

Program Information Display . . . . .14

Reference . . . . . . . . . . . . . . . . . . . . . .15-16

Controlling Your TV with the Supplied

Multi-brand Remote Control . . . . .15

Troubleshooting . . . . . . . . . . . . . .16

Specifications . . . . . . . . . . . . . . . .16

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D are trademark of Dolby Laboratories.

LSX300-4PM_CUSALZK_ENG_4948 7/22/08 10:41 AM Page 3

a POWER indicator

Lights up red (standby mode) or blue (active mode). This indicator will blink when remote signal is received.

b Remote Control Sensor

Receives signals from the Remote Control.

c u/U (Channel Down/Up)

Scans up or down through memorized channels.

d POWER

Turns the unit on or off.

a From Antenna

Connect to digital signal source; over-the-air antenna.

b To TV (RF)

Connect to a TV with RF coaxial inputs.

c VIDEO and AUDIO OUTPUT

(Left/Right)

Connect to a TV/Monitor with Video and audio inputs.

d AC Power Cord

Plug into the power source.

Introduction

Front Panel

Connection Panel Overview

abcd

ab c d

If you have a universal remote control, you may control this unit using it. To program the remote control to control this unit, set the remote control’s operation mode to TV or Settop Box, and set your remote control to the manufacturer codes of LG or Zenith.

Note

LSX300-4PM_CUSALZK_ENG_4948 7/22/08 10:41 AM Page 4

Introduction

Remote Control

TV POWER

Turns the TV ON and OFF. (Refer to page 15)

SLEEP

Sets this unit to turn off automatically at a specified time. (Off t 1 hour t 2 hours t 3 hours t 4 hours)

POWER

Turns the UNIT ON and OFF.

SIGNAL

You can view the signal strength and listen to the beep sound according to signal strength for the current channel.

SAP

Selects program’s audio language if available.

ZOOM

Changes the picture aspect ratio.

DISPLAY

Shows current program information for the current channel.

GUIDE

Brings up the Simple Guide.

CCD

Selects caption mode if available. (Service 1-6 t CC 1-4 t Text 1-4 t Off)

Accesses or closes main menu.

EXIT

Removes all on-screen displays and returns to TV viewing from any menu.

Arrow Buttons (U / u / I / i)

Selects options in a menu.

(Select)

Selects highlighted menu function. Completes the channel number input and promptly tunes to selected channel.

FAV (Favorite )

Selects through the programmed Favorite channels.

MUTE

Turns sound ON and OFF.

CH (Channel) (U / u) / PAGE (R/r)

Selects channels in memory. Pages through the Channel Edit and Block Channel menu.

VOL (Volume) (+/–)

Sets sound level.

Numbers

Chooses channels and enters password.

- (Dash)

Enters a dash for sub channel numbers such as 2-1, 2-2, 47-3 etc.

RECALL

Returns to the last channel viewed.

Remote Control Operation

Point the remote control at the remote sensor and press the buttons.

Remote Control Battery Installation

Detach the battery cover on the rear of the remote control, and insert a battery (size AAA) with 3 and # aligned correctly. We recommend to use the alkaline battery.

POWER

SLEEP

SAP

SIGNAL

DISPLAY

EXIT

VOL CH

CCD

FAV

P A G E

MUTE

ZOOM

GUIDE

1 2 3

4 5 6

7 8 9

RECALL

LSX300-4PM_CUSALZK_ENG_4948 7/22/08 10:41 AM Page 5

Installation

Connections with TV and over-the-air antenna

1. Connect the antenna to the “From Antenna” jack on this unit using a coaxial RF cable (N).

Connect the “To TV (RF)” jack on this unit to the “Antenna In” jack on your TV using a coaxial RF cable (R). Your TV must be tuned to the selected RF Output Channel (Refer to page 8) channel (3 or 4) to display the picture. (default: channel 3).

Connect the VIDEO and AUDIO (L/R) jacks on this unit to the video and audio input jacks on the TV using the video (V) and audio (A) cable.

3. Plug the power cord into a power strip/surge protector or a wall outlet.

Connecting to a VCR

You can record a tuned TV program on the unit by connecting a VCR or similar recording device.

Connect the “VIDEO OUT” and “AUDIO OUT (L/R)” jacks on the unit to the “A/V IN” jack on your VCR using RCA-type cables. See also the owner’s manual supplied with the connected equipment.

Connecting to an Amplifier (Receiver)

You can enjoy the sound by connecting your audio component such as an AV amplifier (receiver).

Connect AUDIO OUT (L/R) jacks on the unit to the audio left and right in jacks on your amplifier, receiver, or stereo system, using an audio cables. See also the owner’s manual supplied with the connected equipment.

Rear of this unit

ARN

ANTENNA

INPUT

Antenna

Rear of this unit

VCR

Rear of this unit

Amplifier (Receiver)

• Set “Audio Output” option to “Mono” if the unit is connected to TV with RF cable (See page 10).

• “To TV (RF)” jack passes the analog signal from the “From Antenna” jack to your TV/monitor if the unit is turned off or unplugged.

Notes

LSX300-4PM_CUSALZK_ENG_4948 7/22/08 10:41 AM Page 6

Setup

Install Guide

The Install Guide is a convenient way for you to customize the settings of this unit. When the unit is turned on for the first time after connecting the power supply, Install Guide is displayed on the screen automatically.

Step 1 (Welcome Message)

Press i to move to the next step.

Step 2 (Menu Language)

Use U / u to select a language (English, Spanish,

French) then press i to move to the next step.

Step 3 (TV Aspect Ratio)

Use U / u to select your TV type then press i to move to the next step.

Step 4 (Searching for Channels...)

Press (Select) to start auto tuning. After auto tuning is complete, press i to move to the next step.

Step 5 (Time Zone)

Use U / u to select a time zone then press i to move to the next step.

Step 6 (Thank You Message)

Press (Select) to

finish install guide.

Menu Overview

By using the menu, you can make various adjustments to menu options such as picture and sound.

To display and exit the Menu:

Press MENU to display the menu. A second press of Menu will take you back to initial screen.

To go to the next level:

Press i on the remote control.

To go back to the previous level:

Press I on the remote control.

Typical Menu Operation

1. Press MENU. The menu appears.

2. Use

u / U

to select the desired option

then press i or (Select) to move to the second level.

3. Use U / u to select the second desired option then press i to move to the third level.

4. Use U / u to select the desired setting then press (Select) to confirm your selection. Some items require additional steps.

5. Press EXIT to exit the menu.

LSX300-4PM_CUSALZK_ENG_4948 7/22/08 10:41 AM Page 7

Setup

Setup Menu Features

Auto Tuning

Automatically finds all digital channels available through the ‘Antenna In’ source and stores all the active channels found. Select “Auto Tuning” option then press

(Select) to start auto tuning.

EZ Add

Automatically adds new channels available through the antenna input to the memorized channels already in the channel list. Select “EZ Add” option then press

(Select) to start auto tuning.

Channel Edit

Channel Edit allows you to manually add or delete channels from the channel list in memory.

1. Select “Channel Edit” option then

press (Select) or i. The Channel Edit menu appears.

2. Select a channel on the Channel Edit menu.

3. Press (Select) to add or delete the channel.

or Press FAV to add the channel to the Favorite Ch. list.

Manual Tuning

This feature manually adds or deletes channels.

1. Select “Manual Tuning” option then

press (Select) or i.

2. Select a channel to add or delete.

3. Press (Select) to confirm your selection.

4. Repeat steps 2-3 to add or delete additional channels.

Output Channel

If you use the To TV (RF) jack, select channel 3 or 4 to send RF signal from the unit to your TV. Your TV must be tuned to the selected channel to display the picture.

Install Guide

The Install Guide is a convenient way for you to customize the settings of this unit. Select [Install Guide] option then press

(Select) and Install Guide menu will

appear, see page 7.

A password is required to gain access to Auto Tuning, Manual Tuning and Install Guide menu if the Lock System option is set to “On”

(See page 10).

Note

While watching TV, you can select a favorite channel using FAV button on the Remote Control.

Tip

Deleted channels can not be selected with the

CH (

u/U

) buttons.

Note

LSX300-4PM_CUSALZK_ENG_4948 7/22/08 10:41 AM Page 8

Setup

Option Menu Features

Clock

Enables the user to set up the clock information. Normally, your clock is set using signals transmitted by DTV stations. Choosing your time zone sets the current time automatically.

1. Select “Clock” option then press

(Select) or i.

2. Use I or i to select your time zone

then press

to move to “Day Light

Saving” option.

3. Use I or i to select a “Day Light

Saving” option. You can turn Day Light Saving “On” or “Off” manually. If it is set to “Auto”, the unit will use the clock information from DTV stations to determine the proper setting.

4. Press (Select) to confirm your setting.

TV Aspect Ratio

Select your TV type. 4:3 – Select when a standard 4:3 TV is

connected.

16:9 – Select when a 16:9 wide TV is

connected.

Aspect Ratio

Selects the screen format for current channel. The options displayed differ depending on the TV Aspect Ratio.

Language

Select a language for the audio and menu. (English, Spanish, or French)

In the case when a TV station does not send, or sends wrong data and/or information, the unit may be set to an incorrect time.

Note

The changed aspect ratio is applied only to current channel.

Note

While watching TV, you can change the aspect ratio using ZOOM button on the Remote Control.

Tip

LSX300-4PM_CUSALZK_ENG_4948 7/22/08 10:41 AM Page 9

Setup

Option Menu Features (Continued)

Caption

Allows you to select an option for displaying Caption Data from the unit.

Mode – Select “Analog” or “Digital” to use

the analog or digital caption feature. If not, select “Off”.

Analog – Selects a mode for displaying

Analog Caption Data. In the Analog Caption Service, CC 1-4 display program’s dialog, and Text 1-4 display data service information.

Digital – Selects a mode for displaying

Digital Caption Data (Service 1-6).

Digital Option – Selects Digital Caption

appearance menu options. Style: Use caption feature defaults as

provided by the program or customize caption appearance with the Custom menu options.

Size: Selects the font size. Font: Selects the font type. Text Color: Selects the font color. Text Opacity: Selects the font opacity. BG. (Background) Color: Selects the

background color. BG. (Background) Opacity: Selects the

background opacity. Edge Type: Selects the edge type. Edge Color: Selects the edge color.

Auto Off

Sets a time this unit will turn off. If you do not press any button within the preset time, this feature automatically turns the unit off. (Default: 4 hours) If you select “Off”, Auto Off is not active.

Audio Output

Select the appropriate audio output mode of the unit depending on your TV connection. Stereo – When your TV is connected with

stereo audio cable (L/R).

Mono – When your TV is connected with

mono audio cable or RF cable.

Lock Menu Features

Lock System

Allows you to set up specific channels and ratings through blocking schemes. Also allows you to activate or disable all of the lock schemes previously set up. A password is required to gain access to the LOCK menus. If the Lock System is set to Off, the Channel and Program Ratings are not functional.

Set Password

Changes the password.

1. Select the “Set Password” option then

press (Select) or i.

2. Enter the new 4-digit password.

3. Enter the same password again for new password’s confirm.

While watching TV, you can change the caption option using CCD button on the Remote Control.

Tip

You can select a time for the Auto Off using SLEEP button on the Remote Control.

Tip

To access the LOCK menu, you must input the 4-digit password. (The default password is “0000”.)

Tip

LSX300-4PM_CUSALZK_ENG_4948 7/22/08 10:41 AM Page 10

Setup

Block Channel

Blocks any channel that you do not want to view or that you do not want your children to watch. If you tune in a blocked channel, a black screen with a pop-up box will appear.

1. Select “Block Channel” option then

press (Select) or i.

2. Select a channel then press (Select) to block or unblock the channel. The mark will appear to the right of the station name to indicate the blocked channel.

3. Repeat step 2 to block or unblock additional channels on the channel list menu.

TV Rating-Children

Prevents children from watching certain children’s TV programs according to the ratings limit set. This rating applies only to TV programs for children. Unless you block TV programs intended for mature audiences in the TV Rating – General menu, your children could view those programs.

1. Select the “TV Rating-Children” option then press (Select) or i.

Select the “Age” or “Fantasy Violence” option then press (Select) or i.

Age: Selection applies regardless of

content category of rating.

Fantasy Violence: Selection applies if

TV programs include rating for Fantasy Violence.

3. Select a rating then press (Select).

TV-Y: All Children.

TV-Y7: Directed toward children age

7 and older.

TV Rating-General

Blocks TV programs that you or your family may not wish to watch, based on the rating scheme set.

1. Select the “TV Rating-General” option then press (Select) or i.

2. Select the “Age”, “Dialogue”, “Language”, “Sex”, or “Violence” option then press (Select) or i.

Age: Selection applies regardless of

content category of rating.

Dialogue: Selection applies if TV pro-

grams have rating for Dialogue.

Language: Selection applies if TV

programs have rating for Language.

Sex: Selection applies if TV programs

have rating for Sex.

Violence: Selection applies if TV pro-

grams have rating for Violence.

3. Select a rating then press (Select).

TV-G: General Audience.

TV-PG: Parental Guidance Suggested.

TV-14: Parents Strongly Cautioned.

TV-MA: Mature Audience Only.

Movie Rating

Blocks movies according to the movie ratings restrictions so children cannot view certain movies. You can set the ratings to block out all the movies with ratings above a specified level. Keep in mind that the movie ratings apply only to movies shown on TV, not TV programs such as soap operas.

1. Select the “Movie Rating” option then press (Select) or i.

2. Select a rating then press (Select).

G: General Audiences

All ages admitted.

PG: Parental Guidance Suggested.

Some material may not be suitable for children.

PG-13: Parents Strongly Cautioned

Some material may not be appropriate for children under 13.

R: Restricted Under 17 requires

accompanying parent or adult guardian.

NC-17: No one 17 and under admit-

ted.

X: No one 17 and under admitted.

LSX300-4PM_CUSALZK_ENG_4948 7/22/08 10:41 AM Page 11

+ 25 hidden pages