LG DM2350D-PS User Guide

<![if ! IE]>

<![endif]>ENGLISH

OWNER’S MANUAL

CINEMA 3D TV

Please read this manual carefully before operating the your TV and retain it for future reference.

CINEMA 3D TV MODEL

DM2350D

www.lg.com

<![if ! IE]>

<![endif]>ENGLISH

2 TABLE OF CONTENTS

CONTENTS

3	LICENSES		28	REMOTE CONTROL
4	INSTALLATION PROCEDURE		30	CUSTOMIZING SETTINGS
		30		Accessing main menus

5ASSEMBLING AND PREPARING

5 Unpacking

7Parts and buttons

8Lifting and moving the TV

9Setting up the TV

9- Attaching the Stand Base

9- Mounting on a table

10- Tidying cables

11- Detaching the Stand Base and Body

12- Mounting on a wall

14 MAKING CONNECTIONS

31 USING THE USER GUIDE

31Accessing user guide menu.

31- Using the TV menu

31- Using the Remote Control

323D IMAGING

32 3D Technology

32Precautions to take when viewing 3D images

33When using 3D Glasses

33 3D Imaging Viewing Range

	14	Selecting an input source
	15	Connecting an antenna or cable		34		MAINTENANCE
	15	- Connecting an antenna or basic cable
			34			Cleaning Your TV
	16	- Connecting with a cable box
			34		- Screen and frame
	17	Connecting to a HD receiver, DVD, VCR
			34		- Cabinet and stand
		player or Gaming device
			34			- Power cord
	17	- HDMI connection
			35			Preventing “Image burn” or “Burn-in” on
	18	- DVI to HDMI connection
						your TV screen
	19	- Component connection
	20	Connecting to an audio system		36
	20	- Digital optical audio connection				TROUBLESHOOTING
	21	- Headphone connection	36			General
	22	Connecting to a USB
			37			PC mode
	23	Connecting to a PC
	24	- HDMI connection	39			TROUBLESHOOTING WHEN
	25	- DVI to HDMI connection
	26	- RGB connection				USING 3D MODE
	27 WATCHING TV		40			SPECIFICATIONS

27 Turning the TV on for the first time

LICENSES 3

LICENSES

Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

DivX Certified® to play DivX® video up to HD 1080p, including premium content.

DivX®, DivX Certified® and associated logos are trademarks of Rovi

Corporation or its subsidiaries and are used under license.

Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

4 INSALLATION PROCE DURE

INSTALLATION PROCEDURE

1 Open the package and make sure all the accessories are included.

2 Attach the stand to the TV.

3 Connect an external device to the TV.

NOTE

yyImage shown may differ from your TV.

yyYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

yyThe available menus and options may differ from the input source or product model that you are using.

yyNew features may be added to this TV in the future.

ASSEMBLING AND PREPARING 5

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.

NOTE

yyThe accessories supplied with your product may vary depending on the model.

yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.

CAUTION

yyDo not use any pirated items to ensure the safety and product life span.

yyAny damages or injuries by using pirated items are not covered by the warranty.

<![if ! IE]>

<![endif]>ENGLISH

6 ASSEMBLING AND PREPARING

<![if ! IE]>

<![endif]>ENGLISH

Remote control /								CD (Owner's Manual) /		RGB Cable
Batteries(AAA)								Card
(see p. 28)										(see p. 26)

Power Cord		AC-DC Adapter		Audio Cable
(see p. 9)		(see p. 9)		(see p. 18, see p. 25 to 26)

Cable Tie		Stand Base		TriDef 3D Game Software CD /
				Quick Installation Guide
(see p. 10)		(see p. 9)

Cinema 3D Glasses(Nomal type / Clip type)

The number of 3D glasses may differ depending on the model or country.

ASSEMBLING AND PREPARING 7

Parts and buttons

<![if ! IE]>

<![endif]>ENGLISH

Power Indicator yyLighting On:Turned on

yyLighting Off:Turned off

Touch Buttons

Remote Control Sensor

OK SETTINGS INPUT

	2
	1
	Connection panel (see p. 14)
Touch button	Description
	Scrolls through the saved channels.
	Adjusts the volume level.
OK	Selects the highlighted menu option or confirms an input.
SETTINGS	Accesses the main menus, or saves your input and exits the menus.
INPUT	Changes the input source.
/ I	Turns the power on or off.

All of the buttons are touch sensitive and can be operated through simple touch with your finger.

NOTE

You can set the Power indicator to on or off by selecting OPTION in the main menus.

<![if ! IE]>

<![endif]>ENGLISH

8 ASSEMBLING AND PREPARING

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for save transportation regardless of its type and size.

CAUTION

Avoid touching the screen at all times, as this may result in damage to the screen or some of the pixels used to create images.

yyIt is recommended to move the TV in the box or packing material that the TV originally came in.

yyBefore moving or lifting the TV, disconnect the power cord and all cables.

yyHold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

yyWhen holding the TV, the screen should face away from you to prevent the screen from scratches.

yyWhen transporting the TV, do not expose the TV to jolts or excessive vibration.

yyWhen transporting the TV, keep the TV upright, never turn the TV on its side, or tilt towards the left or right.

ASSEMBLING AND PREPARING 9

Setting up the TV

Attaching the Stand Base

If you are not mounting the TV to a wall, use the following instructions to attach the stand base.

1Place the TV with the screen side down on a flat and cushioned surface.

CAUTION

yyLay a foam mat or soft protective cloth on the surface to protect the screen from damage.

yyWhen attaching the stand to the TV, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

2Attach the Stand Base from the TV by turning the screw to the right with a Coin.

Mounting on a table

1Lift and tilt the TV into its upright position on a table.

Leave a 10 cm (minimum) space from the wall for proper ventilation.

10 cm

10 cm

10 cm

10 cm

2Connect the AC-DC Adapter and Power Cord to a wall outlet.

<![if ! IE]>

<![endif]>ENGLISH

CAUTION

Tighten the screws firmly to prevent the TV from tilting forward. Do not over tighten.

CAUTION

Do not place the TV near or on sources of heat, as this may result in fire or other damage.

<![if ! IE]>

<![endif]>ENGLISH

10 ASSEMBLING AND PREPARING

WARNING

Tidying cables

Gather and bind the cables with the supplied When you adjust the angle, do not hold the cable tie.

buttom of the TV frame as shown on the following illustration, it may injure your fingers.

CAUTION

Disconnect the power cord first, and then move or install the TV. Otherwise electric shock may occur.

NOTE

Tilt from +18 to -5 degrees up or down to adjust the angle of the TV to suit your view

A B

Front Rear

ASSEMBLING AND PREPARING 11

Using the Kensington security system

The Kensington security system connector is located at the back of the TV. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com.

Connect the Kensington security system cable between the TV and a table.

NOTE

The Kensington security system is optional. You can obtain additional accessories from most electronics stores.

Detaching the Stand Base and Body

1Place the TV with the screen side down on a flat and cushioned surface.

CAUTION

a foam mat or soft protective cloth on the surface to protect the screen from damage.

yyWhen detaching the stand to the TV, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

2Turn the screw to the left, and then pull out the

Stand Base from the Stand Body.

3Remove 2 screws and pull out the Stand Body from the TV.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

12 ASSEMBLING AND PREPARING

Mounting on a wall

For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation instructions are available from your

dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

10 cm

10 cm

10 cm

10 cm

If you intend to mount the TV to a wall, attach the Wall mounting interface (optional parts) to the back of the set.

When you install the TV using the wall mounting interface (optional parts), attach it carefully so it will not drop.

1Please use a wall mount interface in accordance with VESA Standards.

2If you use screws longer than standard, the TV might be damaged internally.

3If you use improper screws, the product might be damaged and drop from the mounted position. In this case, LG Electronics is not responsible for damage.

4VESA compatible only with respect to screw mounting interface dimensions and mounting screw specifications.

5 Please use VESA standard as below. yy784.8 mm (30.9 inch) and under

*Wall Mount Pad Thickness : 2.6 mm

*Screw : Φ 4.0 mm x Pitch 0.7 mm x Length 10 mm

yy787.4 mm (31.0 inch) and above

*Please use VESA standard wall mount pad and screws.

Model		DM2350D
VESA (A x B)	75 x 75
Standard screw	M4
Number of screws	4
Wall mount bracket	RW120
(optional)

yyVESA (A x B)

B A

CAUTION

yyDisconnect the power cord first, and then move or install the TV. Otherwise electric shock may occur.

yyIf you install the TV on a ceiling or slanted wall, it may fall and result in severe injury.

yyUse an authorized LG wall mount and contact the local dealer or qualified personnel.

yyDo not over tighten the screws as this may cause damage to the TV and void your warranty.

yyUse screws and a wall mount that complies with the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

NOTE

yyUse the screws that are listed on the VESA standard screw specifications.

yyThe wall mount kit includes an installation manual and necessary parts.

yyThe wall mount bracket is optional. You can obtain additional accessories from your local dealer.

yyThe length of screws may differ depending on the wall mount. Be sure to use the proper length.

yyFor more information, refer to the instructions supplied with the wall mount.

ASSEMBLING AND PREPARING 13

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

14 MAKING CONNECTIONS

MAKING CONNECTIONS

Connect various external devices to the TV and switch input modes to select an external device. For more information about an external device’s connection, refer to the manual supplied with each device. Available external devices are: HD receivers, DVD players, VCRs, Audio systems, USB storage devices, PC, Camcorders or Cameras, Gaming devices, and other External devices.

NOTE

yyIf you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the manual supplied with the connected device.

yyThe external device connection may differ from the model.

yyConnect external devices to the TV regardless of the order of the TV port.

Selecting an input source

1 Press INPUT to access the input source list.

2 Press the Navigation buttons to scroll to one of the input sources and press OK.

SimpLink

3When you are finished, press EXIT.

When you return to the previous menu, press (BACK).

MAKING CONNECTIONS 15

Connecting an antenna or cable

Connect an antenna, cable, or cable box to watch TV referring to the following. The illustrations may differ from the actual accessories and an RF cable is optional.

Connecting an antenna or basic cable

Connect the TV to a wall antenna socket with an RF cable (75 ohm).

<![if ! IE]>

<![endif]>ENGLISH

Wall Antenna Socket	Outdoor Antenna

NOTE

yyUse a signal splitter to use more than 2 TVs.

yyIf the image quality is poor, install a signal amplifier properly to improve the image quality.

yyIf the image quality is poor with an antenna connected, aim the antenna to the proper direction. yyVisit http://AntennaWeb.org for more information about the antenna and cable connection.

<![if ! IE]>

<![endif]>ENGLISH

16 MAKING CONNECTIONS

Connecting with a cable box

Connect the TV to a cable box and the cable box to a wall antenna socket with 2 RF cables (75 ohm).

CAUTION

yyMake sure not to bend the copper wire of the RF cable.

Copper wire

yyComplete all connections instructions between devices, and then connect the power cord to the power outlet to prevent damages to your TV.

MAKING CONNECTIONS 17

Connecting to a HD receiver, DVD, VCR player or Gaming device

Connect a HD receiver, DVD, VCR player or Gaming device to the TV and select an appropriate input mode.

HDMI connection

HDMI is the best way to connect a device.

Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown on the following illustration.

NOTE

yyUse a High Speed HDMI™ Cable.

yyHigh Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher.

<![if ! IE]>

<![endif]>ENGLISH

DVD/ Blu-Ray / HD Cable Box / HD STB Gaming device

*Not Provided

yyChoose any HDMI input port to connect. yyIt does not matter which port you use.

<![if ! IE]>

<![endif]>ENGLISH

18 MAKING CONNECTIONS

DVI to HDMI connection

Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown in the following illustration.

NOTE

If you do not use an optional external speaker, connect the PC to the TV with the supplied audio cable.

DVI OUT

AUDIO OUT

DVD/ Blu-Ray / HD Cable Box /

HD STB Gaming device

*Not Provided

MAKING CONNECTIONS 19

Component connection

Transmits the analog video and audio signals from an external device to the TV. Connect the external device and the TV with the component cable as shown on the following illustration. To display images by using progressive scan, make sure to use the component cable.

NOTE

yyIf cables are installed incorrectly, it could case the image to display in black and white or with distorted color.

yyCheck to ensure the cable are matched with the corresponding color connection.

<![if ! IE]>

<![endif]>ENGLISH

	VIDEO	AUDIO
Y	PB	PR

DVD/ Blu-Ray / HD Cable Box /

HD STB Gaming device

*Not Provided

*Not Provided

2

1

<![if ! IE]>

<![endif]>ENGLISH

20 MAKING CONNECTIONS

Connecting to an audio system

Use an optional external audio system instead of the built-in speaker.

NOTE

If you use an external audio device instead of the built-in speaker, set the TV speaker feature to off.

Digital optical audio connection

Transmits the digital audio signal from the TV to an external device. Connect the external device and the TV with the optical audio cable as shown on the following illustration

2

1

*Not Provided

OPTICAL AUDIO IN

Digital Audio System

MAKING CONNECTIONS 21

Headphone connection

Transmits the headphone signal from the TV to an external device. Connect the external device and the TV with the headphone as shown on the following illustration.

2

1

<![if ! IE]>

<![endif]>ENGLISH

*Not Provided

Headphone

<![if ! IE]>

<![endif]>ENGLISH

22 REMOTE CONTROL

Connecting to a USB

Connect a USB storage device such as s USB flash memory, external hard drive, MP3 player or a USB memory card reader to the TV and access the USB menu to use various multimedia files.

*Not Provided							*Not Provided
		or							USB

2

1

MAKING CONNECTIONS 23

Connecting to a PC

Your TV supports the Plug & Play* feature and has the built-in speakers with Infinite Surround that reproduces sound clearly with rich bass.

* Plug & Play: This is the function that allows a PC to use the TV without installing a driver.

NOTE

yyIt is recommended to use the TV with the HDMI connection for the best image quality.

yyIf you want to use an optional external speaker instead of the built-in speaker, set the TV speaker feature to off .

yyIf you do not use an optional external speaker, connect the PC to the TV with the optional audio cable.

yyIf you turn the TV on when the set becomes cold, the screen may flicker. This is normal.

yyUse a shielded signal interface cable, such as D-sub 15 pin signal cable and DVI to HDMI cable, with a ferrite core to maintain standard compliance for the product.

yySome red, green, or blue spots may appear on the screen. This is normal.

yyConnect the signal input cable and tighten it by turning the screws clockwise. yyDo not press the screen with your finger for a long time as this may result in

temporary distortion on the screen. yyAvoid displaying a fixed image on the screen for a long period of time to

prevent image burn. Use a screensaver if possible.

NOTE

yyThe OSD (On Screen Display) is displayed on the screen as shown below. »» When turning the product on in HDMI input.

»» When switching to HDMI input.

»» When connecting an HDMI cable with no signal.

Is the input connected to your PC?

Yes

No

Do not show message again.

yyIf you select "Yes" the size and image quality are optimised for your PC.

yyIf you select "No" the size and image quality are optimised for the AV device (DVD player, set-top box, gaming device).

yyIf you select "Do not show message again" this message does not appear until the TV is reset. You can change the set value in Input Blue button Input Label.

yyThe values set for HDMI1/HDMI2 are saved independently.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

24 MAKING CONNECTIONS

HDMI connection

Transmits the digital video and audio signals from your PC to the TV. Connect the PC and the TV with the HDMI cable as shown in the following illustrations. You should set PC as an input label to connect the PC to the TV with an HDMI connection.

NOTE

yyUse a High Speed HDMI™ Cable.

yyPlease check the PC environment if you cannot hear the sound in HDMI mode. yyHigh Speed HDMI™ Cables are tested to carry an HD signal up to 1080p and higher. yyIf you want to use HDMI-PC mode, you must set the input label to PC mode.

PC

*Not Provided

yyChoose any HDMI input port to connect. yyIt does not matter which port you use.

MAKING CONNECTIONS 25

DVI to HDMI connection

Transmits the digital video signal from your PC to

the TV. Connect the PC and the TV with the DVI to HDMI cable as shown the following illustrations.

NOTE

yyIf you want to use HDMI-PC mode, you must set the input label to PC mode.

yyIf you do not use an optional external speaker, connect the PC to the TV with the supplied audio cable.

<![if ! IE]>

<![endif]>ENGLISH

DVI OUT			AUDIO OUT

PC

*Not Provided

<![if ! IE]>

<![endif]>ENGLISH

26 MAKING CONNECTIONS

RGB connection

Transmits the analog video signal from your PC to the TV. Connect the PC and the TV with the D-sub 15 pin cable as shown the following illustrations.

NOTE

yyIf you do not use an optional external speaker, connect the PC to the TV with the supplied audio cable.

2

1

	RGB OUT (PC)	AUDIO OUT
			PC

WATCHING TV 27

WATCHING TV

Turning the TV on for the first time

When you access the TV for the first time, the initial setting screen appears. Select a language and customize the basic settings.

1Connect the power cord to a power outlet. The Power indicator turns blue and the TV switches to Standby mode.

2Press on the TV or power button on the remote control to turn the TV on.

The Power indicator lighting is turned on.

NOTE

When the TV is in Power saving mode, the Power indicator lighting blinks.

3The initial setting screen appears if you access the TV for the first time.

NOTE

If you do not operate the TV within 40 seconds when the setting menu screen appears, the setting menus will disappear.

4Follow the on-screen instructions to customize your TV according to your preferences.

		Selects a language for
	Language
		the display.

NOTE

yyFor those countries without confirmed DTV broadcasting standards, some DTV features might not work, depending on the DTV broadcasting environment.

yyTo display images in the best quality for your home environment, select Home Use mode.

yyStore Demo mode is suitable for the retail environment.

yyIf you select Store Demo mode, the previously customized settings will switch to the default settings of Store Demo mode in 2 minutes.

5When the basic settings are complete, press

OK.

NOTE

If you do not complete the initial setting, it will appear whenever you access the TV.

6To turn the TV off, press on the TV. The Power Indicator turns off.

CAUTION

Disconnect the power cord from the power outlet when you do not use the TV for a long period of time.



Mode Setting



Time Zone



3D-On-Start Setting



Selects Home Use for the home environment.

Selects the time zone and daylight saving.

Turning on the TV, automatically converts 2D to 3D and prints images in 3D.

NOTE

yyYou can also switch the TV from PC mode to TV mode, press TV/PC.

yyYou can also access Initial Setting by accessing OPTION in the main menus.

<![if ! IE]>

<![endif]>ENGLISH

	Auto Tuning	Scans and saves available
		channels automatically.

<![if ! IE]>

<![endif]>ENGLISH

28 REMOTE CONTROL

REMOTE CONTROL

The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the TV correctly.

To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover.

To remove the batteries, perform the installation actions in reverse.

CAUTION

Do not mix old and new batteries, as this may damage the remote control.

Make sure to point the remote control to the remote control sensor on the TV.

(POWER)

Turns the TV on or off.

(User guide)

Selects an E-Manual.

RATIO

Resizes an image.

LIST

Displays the channel table.

INPUT

Selects the input mode.

ENERGY SAVING

Adjusts the brightness of

the screen to reduce energy consumption.

Number buttons

Enters numbers.

Q.VIEW

Alternates between the two last channels selected (pressing repeatedly).

FAV

Accesses your favorite channel list.

VOLUME

Adjusts the volume level.

MUTE

Mutes all sounds.

3D

Uses for viewing 3D video.

CH

Scrolls through the saved channels.

PAGE

Moves to the previous or next screen.

INFO

Views the information of the currently program and the screen.

SETTINGS

Accesses the main menus or saves your input and exit menus.

OK

Selects menus or options and confirms your input.

(BACK)

REMOTE CONTROL 29

<![if ! IE]>

<![endif]>ENGLISH

Q.MENU

Accesses the quick menus.

3D SETTING(Only 3D Mode)

View for 3D Mode setting.

Navigation buttons

Scrolls through menus or options.

GUIDE

Displays the program event according to time scheduler.

Allows the user to move				EXIT
return one step in an
				Clears all on-screen displays
interactive application, EPG
				and returns to TV viewing from
or other user interaction				any menu.
function.

					Backlight
Colored buttons
					Adjusts the brightness of
These access special
					the screen by controlling the
functions in some menus.
					screen backlight.
USB Menu control					PIP
buttons
					Turns the PIP mode on or off.
USB menu(Photo List and
Music List or Movie List).
					SIMPLINK
AV MODE					Accesses the AV devices
Selects an AV Mode.					connected to the TV;
					Opens the SIMPLINK menu.
					TV/PC
					Selects TV or PC mode.

<![if ! IE]>

<![endif]>ENGLISH

30 CUSTOMIZING SETTINGS

CUSTOMIZING SETTINGS

Accessing main menus

1	Press SETTINGS to access the main menus.
2	Press the Navigation buttons to scroll to one of the following menus and press OK.
3	Press the Navigation buttons to scroll to the setting or option you want and press OK.
4	When you are finished, press EXIT.
	When you return to the previous menu, press (BACK).

AUDIO

CHANNEL

Adjusts the sound quality,

Sets up and edit

effect, or volume level.

channels.

PICTURE

TIME

Adjusts the image size,

Sets the time, date or

quality, or effect.

PICTURE

AUDIO

CHANNEL

TIME

Timer feature.

LOCK
Locks or unlocks channels
and programs.	LOCK

			MY MEDIA
			Using integrated media
OPTION	INPUT	MY MEDIA	features.

OPTION		INPUT
Customizes the general		Views the input sources
settings.		with their labels.

yyPress RED button to access the Customer Support menus.

Press OK( ) to set channel settings.

FAQ	Customer Support	Exit
Customer Support

Using Customer Support feature. yySoftware Update

yyPicture Test yySound Test yySignal Test yyProduct/Service Info. yyUser Guide