All screen shots in this guide are simulated.
Actual displays and the color of the phone may vary.
Some of the contents in this manual may differ from your phone depending
on the software of the phone or your service provider.
MFL68086801 (1.0)
www.lg.com
LIMITED WARRANTY STATEMENT
1. WHAT THIS WARRANTY COVERS :
LG offers you a limited warranty that the enclosed
subscriber unit and its enclosed accessories will be free
from defects in material and workmanship, according to
the following terms and conditions:
1. The limited warranty for the product extends for TWELVE
(12) MONTHS beginning on the date of purchase of the
product with valid proof of purchase, or absent valid
proof of purchase, FIFTEEN (15) MONTHS from date of
manufacture as determined by the unit’s manufacture
date code.
2. The limited warranty extends only to the original
purchaser of the product and is not assignable or
transferable to any subsequent purchaser/end user.
3. This warranty is good only to the original purchaser of
the product during the warranty period as long as it is
in the U.S, including Alaska, Hawaii, U.S. Territories and
Canada.
4. The external housing and cosmetic parts shall be free of
defects at the time of shipment and, therefore, shall not
be covered under these limited warranty terms.
5. Upon request from LG, the consumer must provide
information to reasonably prove the date of purchase.
6. The customer shall bear the cost of shipping the product
to the Customer Service Department of LG. LG shall bear
the cost of shipping the product back to the consumer
after the completion of service under this limited
warranty.
2. WHAT THIS WARRANTY DOES NOT
COVER :
1. Defects or damages resulting from use of the product in
other than its normal and customary manner.
2. Defects or damages from abnormal use, abnormal
conditions, improper storage, exposure to moisture or
dampness, unauthorized modifications, unauthorized
connections, unauthorized repair, misuse, neglect, abuse,
accident, alteration, improper installation, or other acts
which are not the fault of LG, including damage caused
by shipping, blown fuses, spills of food or liquid.
3. Breakage or damage to antennas unless caused directly
by defects in material or workmanship.
4. That the Customer Service Department at LG was
not notified by consumer of the alleged defect or
malfunction of the product during the applicable limited
warranty period.
5. Products which have had the serial number removed or
made illegible.
6. This limited warranty is in lieu of all other warranties,
express or implied either in fact or by operations of
law, statutory or otherwise, including, but not limited
to any implied warranty of marketability or fitness for a
particular use.
7. Damage resulting from use of non-LG approved
accessories.
8. All plastic surfaces and all other externally exposed parts
that are scratched or damaged due to normal customer
use.
9. Products operated outside published maximum ratings.
10. Products used or obtained in a rental program.
11. Consumables (such as fuses).
Some states do not allow the exclusive of limitation of
3. WHAT LG WILL DO:
LG will, at its sole discretion, either repair, replace or
refund the purchase price of any unit that does not
conform to this limited warranty. LG may choose at its
discretion to use functionally equivalent reconditioned,
refurbished or new units or parts or any units. In
addition, LG will not re-install or back-up any data,
applications or software that you have added to your
phone. It is therefore recommended that you back-up
any such data or information prior to sending the unit to
LG to avoid the permanent loss of such information.
4. STATE LAW RIGHTS :
No other ex warranty is applicable to this product.
THE DURATION OF ANY IMPLIED WARRANTIES,
INCLUDING THE IMPLIED WARRANTY OF
MARKETABILITY, IS LIMITED TO THE DURATION OF
THE EXPRESS WARRANTY HEREIN. LG INFOCOMM
INC. SHALL NOT BE LIABLE FOR THE LOSS OF THE
USE OF THE PRODUCT, INCONVENIENCE, LOSS OR
ANY OTHER DAMAGES, DIRECT OR CONSEQUENTIAL,
ARISING OUT OF THE USE OF, OR INABILITY TO
USE, THIS PRODUCT OR FOR ANY BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY, INCLUDING THE
IMPLIED WARRANTY OF MARKETABILITY APPLICABLE
TO THIS PRODUCT.
5. HOW TO GET WARRANTY
To obtain warranty service, please call or fax to the
Tel. 1-800-793-8896 or Fax. 1-800-448-4026
Or visit www.lg.com.
LG Electronics MobileComm U.S.A., Inc.
201 James Record Road Huntsville, AL 35824
DO NOT RETURN YOUR PRODUCT TO THE ABOVE
incidental or consequential damages or limitations on
how long an implied warranty lasts; so these limitations
or exclusions may not apply to you. This warranty gives
you specific legal rights and you may also have other
rights which vary from state to state.
SERVICE :
following telephone numbers from anywhere in the
continental United States:
Correspondence may also be mailed to:
ADDRESS.
Please call or write for the location of the LG authorized
service center nearest you and for the procedures for
obtaining warranty claims.
Table of Contents
Important Notice ..............................8
Your Phone ......................................13
Please check to see if any problems you have
encountered with your phone are described
in this section before taking the phone in for
service or calling a service representative.
1. Phone Memory
In order to make more memory available, you
will have to manage your applications and
delete some data, such as applications or
messages.
Managing Applications
1 From the Home screen, tap the
and tap
All settings > General tab
> Apps
.
2 Tap one of the available tabs at the top of
the screen and select the application you
want to uninstall.
Uninstall
3 Tap
that you want to uninstall the desired
application.
Menu Key
and then tap OK to confirm
2. Optimizing Battery Life
You can extend your battery's life between
charges by turning off features that you don't
need to run constantly in the background. You
can also monitor how applications and system
8
resources consume battery power.
To extend the life of your battery
•Turn off radio communications that you
aren't using, such as Wi-Fi, Bluetooth, or
GPS.
•Wi-Fi will be set to On the first time you use
your newly purchased phone.
• Lower screen brightness and set a shorter
screen timeout.
•Turn off automatic syncing for Gmail,
Calendar, Contacts, and other applications.
•Some applications you have downloaded
may cause your battery power to be reduced.
•While using downloaded applications, check
the battery charge level.
To view the battery charge level
1 From the Home screen, tap the Menu Key
and tap
and tap
Battery .
All settings
All settings
> Battery.
2 The battery status (charging or discharging)
and level are displayed on the screen.
To monitor and control what uses the
battery
1 From the Home screen, tap the
>
> General tab
Menu Key
> General tab
2
Tap the battery icon.
3 A list all of the applications or services using
battery power from the greatest amount of
energy used to the least amount. You can
also use it to turn off applications or services
if they are consuming too much power. Tap
any of the listed items for more options.
3. Installing an Open Source
Operating System
Installing an open source operating system
on your phone and not using the operating
system provided by the manufacturer can
cause your phone to malfunction.
%
Warning
•
If you install and use an operating system
other than the one provided by the
manufacturer, your phone is no longer
covered by the warranty.
•
To protect your phone and personal data,
download applications only from trusted
sources, such as Play Store. If some
applications are not properly installed
on your phone, your phone may not work
properly- or serious errors may occur. You
will need to uninstall those applications
and all of its data and settings from the
Important notice
phone.
4. Using a Screen Lock
Set a screen lock to secure your phone. To set
the screen lock, follow the process below.
From the Home screen, tap the
,
tap
Lock screen settings > Select
screen lock
from
and Password
%
•In case that you have trouble with Face
%
•T
and select a desired screen lock
Swipe, Face Unlock, Pattern, PIN
NOTE
Unlock, you can unlock the screen a Backup
Pattern or PIN.
.
Warning
ake
precautions whe
Pattern, PIN, or Password. It is very
important that you remember the screen
unlock information you set. You are
allowed 5 attempts to enter your screen
unlock information. If you used up all 5
opportunities, you will have to wait 30
seconds to attempt unlocking the phone
again.
Menu Key
n using an unlock
9
Important notice
When you can’t recall your Unlock
Pattern, PIN, or Password:
If you logged into a Google account on
the phone and failed to use the correct
pattern 5 times, tap Forgot pattern? You
will be required to sign in with your Google
account and prompted to create a new
unlock pattern.
If you have set a backup PIN, you can
unlock the screen with keying in the backup
PIN.
If you haven’t created a Google account
on the phone and you forgot your PIN,
Password, and the backup PIN, you need to
perform a hard reset.
%
Caution
•If you perform a hard reset, all user
applications and user data will be deleted.
Please remember to back up any important
data before performing a hard reset.
Read ALL steps before attempting.
1 Turn the phone off.
2 Press and hold the following keys at the
same time: V
Power/Lock Key on the back of
the phone.
olume Down Key +
10
3 Release the Power/Lock Key
only when the LG logo is displayed, then
immediately press and hold the Power/
Lock Key again.
4 Release all keys when the Factory hard reset
screen is displayed.
5 Press the V
•To cancel the Factory hard reset, select No
6 Press the V
7 Your device will perform a hard reset.
olume Down Key to scroll
to Yes, then press the Power/Lock Key
to confirm.
(Exit).
olume Down Key to scroll
to Yes , then press the Power/Lock Key
to confirm once more.
5. Using Safe Mode
Using Safe mode
To recover your phone when malfunctioning.
1 Turn off your phone and reboot. When you
see the AT&T booting animation press and
hold the Volume Down Key until you
see the Home screen.
OR
While the phone is on, press and hold the
Power/Lock Key until the Phone
Important notice
options menu is displayed. Then touch and
hold Power off and tap OK.
Your Home screen will then be displayed
with the words "Safe mode" in lower left
corner.
2 From the Home screen, tap the
and tap All settings > General tab
> Apps.
3 Tap one of the available tabs at the top of
the screen and select the application you
wish to uninstall.
4 Tap Uninstall and OK to confirm.
5 After uninstalling the application, reboot
6.
your phone.
Connecting your phone to a
Menu Key
computer via USB
1 Use the USB cable that was provided with
your phone to connect the phone to a USB
port on your computer. You'll receive a
notification that the USB is connected and
can see USB connection mode screen.
2 Tap Media sync (MTP) or Send images
(PTP) to confirm that you want to transfer files
between your phone and the computer.
When the phone is connected as USB storage,
you receive a notification. Your phone is
recognized as a device on your computer. You can
now copy files to and from the phone.
%
TIP
•You can access your phone's storages while
connected as USB storage. So you cannot
use applications that rely on the storages,
such as Music.
7. Unlock screen when using
data connection
Your screen will go dark if untouched
for a period of time when using a data
connection. To turn on your LCD screen,
press the
Power/Lock Key
the length of time the screen takes to turn
off, tap the Menu Key > All settings >
Display tab > Screentimeout and select the
desired amount.
8. Internal antenna
Please hold the mobile phone straight up
as a regular phone.
While making/receiving calls or sending/
receiving data, try to avoid holding the lower
part of the phone where the antenna is
located. It may affect call quality.
. To change
11
Important notice
9. When the screen freezes
If the phone does not respond to user
input or the screen freezes:
Press and hold the Power/Lock Key for
10 seconds to reboot it.
10. Do not connect your phone
when you power on/off
your PC
Make sure to disconnect your phone from the
PC when powering your PC on or off as it might
result in PC errors.
11. Hardware key control
mode
If your phone display is damaged or broken,
you can answer an incoming call, end a call, or
turn off an alarm using the hardware keys.
1 Turn your phone off.
2 Press and hold the Power/Lock Key
and the Volume Keys at the same time for
more than 6 seconds to enter the Hardware
key control mode.
3 Press the V
12
olume Keys to scroll to the desired option, then press the Power/Lock
Key to confirm.
• Answer a call: Press the Volume Keys
at the same time.
• End a call: Press the Power/Lock Key
during a call.
• Stop an alarm: When an alarm rings,
press and hold the Volume Up Key or
Volume Down Key to stop the alarm.
%
NOTE
•If you use your phone with a broken display
glass, your phone can break even more or
you can be injured. Make sure to visit the LG
authorized service center to get your phone
repaired.
Your Phone
To turn on the phone, press and hold the Power/Lock Key on the back side of the phone for 1.5 seconds.
To turn off the phone, press the Power/Lock Key
Power off and OK to confirm.
Front view
Front Camera Lens
•Use to take a picture of
yourself or to video chat on
supported applications.
Quick Keys
• Gives you quick access to your
most used applications.
•To add an icon, drag and drop it
in the bar.
•
To remove an icon, touch and
hold it and remove it from
the bar.
Back Key
•Returns to the previous screen.
•Closes pop-up menus and dialog
boxes.
Home Key
•Returns to the Home screen from any screen.
•Touch and hold to access your most recently
used applications.
%
Warning
•
Placing a heavy object on the phone or sitting on it can damage its LCD and touch screen
functionalities. Do not cover the LCD’s proximity sensor with a protective film. This can
cause the sensor to malfunction.
on the back side of the phone for 1.5 seconds and tap
Earpiece
Notification LED
Proximity Sensor
•Senses proximity toward
other objects, such
as your head during a
call, so that you do not
accidentally activate
unwanted features.
Menu Key
•Displays available options for
the current screen or
application.
13
Your Phone
%
TIP
•Tap the Menu Key
Side view
Micro SIM Card Tray
Eject Button Aperture
whenever you open an application to check what options are available.
Microphone
Charger/USB Port
3.5mm
Headset
Jack
Rear view
IR(Infrared) Sensor
Volume Keys
%
NOTE
•The NFC antenna for this model is on the back cover.
•The back cover of this product applies a “self-healing” technology, which self-repairs minor
Back Camera Lens
Flash
Power/Lock Key
Speaker
scratches in just a few minutes. Minor scratches are those caused by ordinary and normal
use of the phone. Scratches caused by abrasive surface, misuse, including but not limited to
intentional scratches, and damages caused by a fall or dropping the product, may not disappear.
The “self-healing” results may vary depending on the extent of the damage as well as other
conditions. Any warranty on the “self-healing” is hereby expressly excluded.
14
Getting Started
Installing the micro SIM card
Before you can start exploring your new phone,
you’ll need to set it up. The micro SIM card
tray eject button is a small round aperture on
the tray door. To install a new micro SIM card:
1 Insert the micro SIM ejection tool that
comes with the phone (or a thin pin) into the
eject button aperture and push gently but
firmly until the tray pops out. Then pull the
micro SIM card tray.
Eject button aperture
2 Position the micro SIM card into the tray (as
shown in the image below).
3 Insert the micro SIM card tray.
%
NOTE
•
Turn the phone off before inserting or removing
the micro SIM card.
%
Warning
•
Always be careful when removing the
micro SIM card tray. The ejection tool is
very sharp.
Charging your phone
1 Connect the wall adapter and USB cable as
shown below. The USB symbol on the USB
cable should face toward you.
15
Getting Started
2 Plug the USB cable (as shown below) into
the phone's Charger/USB Port. Make sure
the USB symbol is facing upwards.
Always unplug the charger from the wall
socket after the phone is fully charged to
save unnecessary power consumption of
the charger.
%
NOTE
•
The battery must be fully charged initially
to improve battery lifetime.
•
Your phone has an internal antenna. Be
careful not to scratch or damage this
rear area, as that will cause loss of
performance.
•
When the battery becomes fully
discharged and you connect the phone
to a charger, the Notification LED lights
will blink. This is normal operation for a
completely discharged battery to prevent
16
overflowing current because the phone is
designed to provide reasonable protection
against damage to the battery. Once the
battery has enough charge, the screen
will turn on and display a battery image.
•
Non-Removable Battery
Your phone has an internal, rechargeable
battery that should be replaced only by
LG or an authorized LG repair center. You
should never try to open or take apart
this phone yourself. Opening the phone
can cause damage that will void your
warranty.
%
Warning
•Use only LG-approved chargers, batteries
and cables. When using unapproved
chargers or cables, it may cause slow
charging. Or, unapproved chargers or cables
can cause the battery to explode or damage
the device, which are not covered by the
warranty.
•
Charging may be interrupted when you
use a USB hub, which is not retained
rated voltage.
Switching between and
exiting applications
Multi-tasking is easy with Android because
open applications keep running even when you
open another application. There is no need to
quit an application before opening another. Use
and switch among several open applications.
Android manages each application, stopping
and starting them as needed, to ensure that
idle applications don’t consume resources
unnecessarily.
Switching between applications
•
Touch and hold the Home Key . A list of
recently used applications will be displayed.
Then tap the application you want to access.
•
To remove an application from the list, swipe
the app preview to the left or right.
To stop/exit an application
1 From the Home screen, tap the
and tap All settings > General tab
>
Apps.
2 Tap one of the tabs at the top of the
screen, choose the desired application
and tap
Force stop
application.
Menu Key
(or Stop) to stop the
Getting Started
17
Your Home screen
Touch screen tips
With the touch of your finger, you can access
available applications, make menu selections, and
access data saved to your phone. The following
terms are used for describing the different
available actions using the touchscreen:
Tap - A single finger tap selects items, links,
shortcuts and letters on the on-screen keyboard.
Touch and hold the screen by touching it and not lifting your
finger until an action occurs. For example, to
open a contact's available options, touch and
hold the contact in the Contacts list until the
context menu opens.
Drag - Touch and hold an item for a moment
and then, without lifting your finger, move your
finger on the screen until you reach the target
position. You can drag items on the Home screen
to reposition them.
Swipe or slide move your finger across the surface of the
screen, without pausing when you first touch
it (so you don’t drag an item instead). For
example, you can slide the screen up or down
to scroll through a list, or browse through the
different Home screens by swiping from left to
right (and vice versa).
18
Touch and hold an item on
To swipe or slide, quickly
Double-tap - Double-tap to zoom on a Web
page or a map. For example, quickly double-tap a
section of a Web page to adjust that section to fit
the width of the screen. You can also double-tap
to zoom in and out when using Maps.
Pinch-to-Zoom thumb in a pinch or spread motion to zoom in
or out when using the browser, Maps, Camera,
or browsing pictures.
Rotate the screen - From many applications
and menus, the orientation of the screen adjusts
to the device's physical orientation.
%
NOTE
•
To select an item, tap the center of the icon.
•
Do not to press too hard; the touch screen is
sensitive enough to pick up a light, firm touch.
•Use the tip of your finger to tap the option
you want. Be careful not to tap any other
keys or icons.
Use your index finger and
Proximity sensor
When receiving and making calls, this sensor
automatically turns the backlight off and locks
the touch keypad by sensing when the phone
is near your ear. This extends battery life and
prevents the touch keypad from activating
unintentionally during calls.
Your Home screen
Lock your phone
When you are not using the phone, press the
Power/Lock Key
This helps prevent accidental presses and saves
battery power.
Also, if you do not use the phone for a while, the
Home screen, or other screen you are viewing, is
automatically replaced with the lock screen after
30 seconds (depending on the screen timeout
settings) of inactivity to conserve the battery and
prevent pocket dialing.
To wake up your phone, press the
Lock Key .
Swipe the screen in any direction to unlock.
The last screen you were working on opens.
%
NOTE
•The automatic screen timeout can be
configured manually in Settings. To change
it, tap the
Menu Key
Display tab > Screen timeout.
•If there are any programs running when you
lock the phone, they may still be running in
lock mode. It is recommended that you exit
all programs before entering the lock mode
to avoid unnecessary charges (e.g., phone
call, web access and data communications).
to lock your phone.
Power/
The lock screen will appear.
> All settings >
KnockON
The KnockON feature allows you to double-tap
the screen to easily turn it on or off. You can
disable this feature in the Gestures settings.
To turn the screen on
1 Double-tap the center of the Lock screen to
turn the screen on.
2 Unlock the screen or access any of the
available shortcuts or widgets (if available).
To turn the screen off
1 Double-tap an empty are of the Home screen
or the Status Bar
2 The screen will turn off.
%
NOTE
•Tap on the center area of the screen. If
you tap on the bottom or the top area, the
recognition rate may decrease.
•To activate or deactivate the feature, tap
> > All settings > General tab >
Gestures > Screen on/off.
.
19
Your Home screen
Quick Switch to Silent/Vibrate
Mode
To quickly set your phone to silent or vibrate
mode, slide the Status Bar down and tap
until
or appears.
Home Screen Overview
The main Home screen is the starting point
for many applications and functions, and it
allows you to add items like application icons,
shortcuts, folders or widgets to give you
instant access to information and applications.
This is the default page and accessible from
any menu by tapping the
On your Home screen, you can view menu
icons at the bottom of the screen. Menu icons
provide easy and one-touch access to the
functions you use the most.
Home Key .
Navigating Through the Home
Screen Canvases
Your phone has several Home screen canvases.
If you like, you can place different applications
on each of the Home screen canvases.
From the main Home screen canvas, swipe the
screen with your finger in either direction. The
main Home screen canvas is located in the
middle. To add more canvases, pinch in on the
20
Home screen and tap
You can also customize each canvas with
shortcuts, folders, and widgets.
Navigating Through the Sub-
.
Menus
Sub-menus are available when you are at
any Home screen or have selected a feature
or application such as Phone, Contacts,
Messaging or Browser.
1 Touch the Menu Key
displays at the bottom of the phone screen.
2 Tap an option.
. A sub-menu
Customizing your Home
screen
You can customize your Home screen by
adding quick access items, such as shortcuts
to an application, widgets, or changing the
wallpaper.
•
Apps
: Add shortcuts to applications on the
Home screen.
•
Widgets
: Add dynamically updating
widgets to your Home screen to allow quick
access to applications without opening the
full application
Your Home screen
•
Wallpapers
wallpaper.
To add shortcuts to apps or widgets on
the Home screen:
1 Select a location (Home screen canvas) to
add an item by swiping the Home screen
from left to right or vice versa.
2 Touch and hold an empty part of the Home
screen.
3 Tap the type of item you want to add on the
screen:
4 Tap the desired app or widget.
5 You will see a new icon on the Home screen.
To place it on a different canvas, touch and
hold it to drag it to the desired location and
release your finger from the screen.
%
•
To add a preloaded application or an
application you have downloaded from Play
Store to the Home screen, simply touch and
hold the icon you want in the Apps screen and
drag it to the desired Home screen canvas.
%
NOTE
•If there is no available space on a particular
Home screen panel, you must delete or
remove an item before you can add another
item. In this case, you have the option of
switching to another Home screen panel.
Apps or Widgets
TIP
: Change the Home screen
.
To delete an application icon from the Home
screen, touch and hold the shortcut icon
or widget you want to delete and drag to
Remove
at the top of the screen.
changes to , lift your finger.
You cannot delete the preloaded applications.
(Only their icons can be deleted from the screen).
When
Customizing apps icons on the
Home screen
You can create your own custom application
icon(s) using the images in your Gallery.
1 Touch and hold an application icon until it’s
unlocked from its current position. Then
drop it on the screen. The editing icon
will appear in the upper right corner of the
application.
%
NOTE
•If an icon you placed can be resized, you
will see a blue box around the icon after you
touch, hold and release it. Drag the edges of
the box to resize it.
21
Your Home screen
2 Tap the application icon.
3 Tap the icon design you want from the
available Theme icon choices and change the
size (if desired), then tap OK.
OR
Tap Photo icon, then tap Add new. Set the
size for the icon, then tap OK. Select the image
want to use for the application. Crop the image
if necessary, then tap OK.
22
%
NOTE
•Your customized application icon(s) are only
applied to icons on your Home screen. The
Applications screen is not affected.
•
Your custom photo icons are saved so you
can easily select them for any of your icon
images.
Creating Application Folders
on the Home screen
You can create application folders to hold
similar applications if you wish.
On the Home screen
1 Touch and hold an icon to unlock it from its
positions. Then drag it over another icon and
release it.
Your Home screen
2 A folder will be created.
3 To rename the folder or change its color,
open it and tap the folder name.
On the Apps screen
1 From the Home screen, tap the Apps Key
to open the Apps screen.
2 Tap the Menu Key
User customized.
%
NOTE
•A folder cannot be created when the apps
are organized by Alphabetical order or
Downloaded date.
3 Tap
.
4 Touch and hold the desired icon to release it
from its position.
5 Drag the icon over another icon and release
it to create a folder
> View apps by >
.
Customizing the Apps screen
1 From the Home screen, tap the Apps Key
.
2 Tap the Apps tab at the top of the screen
to go to the Apps screen, if it is not already
selected.
3 Tap the Menu Key
following Applications screen options:
View apps by: Tap to sort your
•
to access the
applications in alphabetical order, by
downloaded date, or user customized.
•Show small/large icons: T
the application icons to either small or
large, then tap Yes to set your choice.
•App menu wallpaper: T
wallpaper background. Scroll horizontally
to view all of your choices, tap the one
you want, then tap Apply.
•Hide/Show apps: T
application icons will be displayed in your
Applications screen. Checkmark the icons
you want to hide, then tap OK.
ap to change
ap to change the
ap to set which
Home screen clean view
You can see the wallpaper without items on
the Home screen by placing two fingerso on
the screen and pinching out. Pinch in or tap
the Back Key
widgets again.
to see applications and
23
Your Home screen
Quick access
To view the quick access items, touch
anywhere in the front key area and drag up.
The following options are available: Voice
Mate, Google Search, and QuickMemo.
Notifications
Notifications alert you to the arrival of new
messages, calendar events, and alarms, as
well as to ongoing events, such as video
downloads. From the Notifications panel,
you can view your phone’s current status and
pending notifications.
When a notification arrives, its icon appears
at the top of the screen. Icons for pending
24
notifications appear on the left, and system
icons showing things like Wi-Fi or battery
strength on the right.
%
NOTE
•The available options may vary depending on
the region or service provider.
Notification iconsSystem icons
Accessing notifications
Swipe the Status Bar down to open the
Notifications panel to access notifications. To
close the Notifications panel, swipe the bar at
the bottom of the screen upwards.
Quick Settings
Use the Quick Settings to easily toggle function
settings like Wi-Fi, manage display brightness
and more. To access the Quick Settings, swipe
the Status Bar down to open the Notifications
panel and select any of the available Quick
Setting apps at the top of the screen.
%
NOTE
•Touch and hold an icon on the Quick Settings
menu to go directly to that setting's menu
screen.
Opening the notifications panel
Swipe down from the status bar to open the
notifications panel.
Tap to quickly access the Date & time
settings.
Settings
Tap to open the Settings menu.
Your Home screen
Quick Settings Area
Tap each quick settings key to turn it on/
off. Touch and hold the key to access the
settings menu of the function. To see more
options, swipe left or right. Tap to
remove, add, or rearrange the options.
QSlide Apps
Tap a QSlide app to open as a small
window on your screen. Tap to remove,
add, or rearrange QSlide apps.
Tap to clear all the notifications.
Notifications
The current notifications are listed, each
with a brief description. Tap a notification
to view it.
To close the notifications panel, touch and
drag the tab toward the top of the screen.
Notification icons on the Status
Bar
Notification icons appear on the Status Bar at
the top of the screen to report missed calls,
new messages, calendar events, device status
and more.
The icons listed in the table below are some of
the most common ones.
25
Your Home screen
IconDescription
No SIM card inserted
No network signal available
Airplane mode is on
Connected to a Wi-Fi network
Wired headset connected
Call in progress
Missed call
Bluetooth is on
NFC is on
System warning
An alarm is set
New voicemail available
26
IconDescription
Ringer is silenced
Vibrate mode is on
Battery fully charged
Battery is charging
Phone is connected to PC via
USB cable
Downloading data
Uploading data
GPS is on
Receiving location data from
GPS
Data is synchronizing
New Gmail message available
New Hangouts message
available
Your Home screen
IconDescription
New text or multimedia
message
A song is currently playing
Mobile hotspot is active
Choose input method
DLNA content share
DLNA music playing
On-screen Keyboard
You can enter text using the on-screen
keyboard. The on-screen keyboard displays
automatically on the screen when you need to
enter text. To manually display the keyboard,
simply tap a text field where you want to
enter text.
There are three types of keyboards that you
can use:
Android keyboard (AOSP)
Google voice typing and LG Keyboard.
,
To select the keyboard:
1 From the Home screen, tap the Menu
Key > All settings > General tab >
Language & input > Default (under the
Keyboard & Unput Methods section).
2 Select the default keyboard between
Android keyboard (AOSP)
Keyboard.
OR
1 While entering text, drag the Status Bar
down and tap Choose input method.
2 Select the desired input method from
Android keyboard (AOSP)
voice typing or LG Keyboard.
and LG
, Google
(default).
27
Your Home screen
LG keyboard - Letters Entry
Shift Key - Tap once to capitalize the next letter you type. Double-tap for all caps.
Symbols Key - Tap to change input to
number and symbol entry.
Keyboard Style/Language Key
to change the keyboard style or input
language.
Voice input/Handwriting/Clip Tray/
Settings
Key - Tap to enter text by voice.
Touch and hold to enter text by handwriting,
enter items copied to the Clip Tray, or
access the keyboard settings. The default
icon displayed is Voice input.
Space Key - Tap to enter a space.
Enter Key - Tap to move the cursor to the
next line.
Delete Key - Tap to delete characters to
the left of the cursor.
- Tap
28
LG keyboard - Numbers and Symbols
Letters Key - Tap to change input to
letters entry.
Emoji Mode - Tap to enter emoji
characters.
Space Key - Tap to enter a space.
Enter Key - Tap to move the cursor to
the next line.
Delete Key - Tap to delete characters to
the left of the cursor.
Entry
Your Home screen
Android keyboard (AOSP) - Letters Entry
Shift Key - Tap once to capitalize the
next letter you type. Double-tap for all
caps.
Number and Symbols Key - Ta p to
change input to number and symbol entry.
Voice to Text/Settings Key - Tap to
enter text by voice. Touch and hold to set
various keyboard settings.
Space Key - Tap to enter a space. Touch
and hold to change your input method.
Enter Key - Tap to move the cursor to
the next line.
Delete Key - Tap to delete characters to the
left of the cursor.
Android keyboard (AOSP) -
Numbers and Symbols Entry
Alt Key - Tap to enter additional
symbols.
Letters Key - Tap to change input to
letters entry.
Settings Key - Touch and hold to set
various Android keyboard settings.
Space Key - Tap to enter a space. Touch
and hold to change your input method.
Enter Key - Tap to move the cursor to
the next line.
Delete Key - Tap to delete characters to
the left of the cursor.
29
Your Home screen
123 Mode
This mode allows you to enter numbers in a
text message (a telephone number, for
example) more quickly. Tap the keys
corresponding to the required digits before
manually switching back to the appropriate
text entry mode by tapping
Keyboard or
on the Android keyboard.
on the LG
Entering Special Characters
The on-screen keyboard allows you to enter
special characters (e.g., “á”).
To enter a special character, touch and hold the
desired key (touch the “a” key for example).
After the special character appears, slide your
finger over it and lift it off it to enter it.
%
NOTE
•A symbol at the top (or bottom) right corner
of a key indicates that additional characters
are available for that key.
Using Clip Tray
Easily access the contents you stored in the
Clip Tray whenever and wherever you want.
You can copy images or texts and keep them
in the Clip Tray. Then, you can paste them
whenever and wherever you want.
30
1 Touch and hold text and images while eding
them and tap Clip T
2 Touch and hold the text input field and select
Clip T
ray. You can also access the Clip Tray
by touching and holding
%
NOTE
•You can save up to 20 items in the Clip Tray.
•Touch and hold an item in the Clip Tray and
tap to delete it.
•This function may not be supported in
downloaded apps.
ray.
> .
Text Link
Text Link recommends apps related to text in
messages or other selected text. It connects
directly to the Calendar, Contacts, Phone,
Messaging, Email, Browser, Maps, YouTube,
Calculator, and more.
%
NOTE
• If your phone is set to English or Korean, Text
Link performs more functions than in other
language settings.
•Overly long sentences are subject to
limitations.
•Arithmetic operators (such as +, -, * and /)
start the Calculator.
Your Home screen
•If Text Link is not linked to an app, the
Browser can be used for searching.
To use Text Link:
Tap a message bubble with the icon.
Text Link recommends apps related to the
message content.
Plug & Pop
Plug & Pop allows you to quickly choose
apps to use when plugging in an earphone
or On-the-Go device, such as a mouse or
keyboard.
1 Plug in earphone or OTG (On-the-Go) device
(i.e., mouse, keyboard, etc.).
2 The applications panel will display and you can
select an app to run.
%
NOTE
•You can edit the applications to display
on the panel and set not to show the
applications panel.
From the Home screen, tap the Menu
Key
> All settings > General tab >
Accessory > USB Storage or Earphone.
OR
31
Google Account Setup
The first time you open a Google application on
your phone, you will be required to sign in with
your existing Google account. If you do not
have a Google account, you will be prompted
to create one.
Creating your Google account
1 From the Home screen, tap the Apps Key .
2 Tap Settings > General tab >
Accounts & sync > Add account >
Google > New.
3 Enter your username and tap
phone will communicate with Google servers
and check for username availability.
4 Enter and re-enter your password. Then
follow the instructions and enter the
required and optional information about
the account. Wait while the server creates
your account.
32
. Your
Signing into your Google
account
1 From the Home screen, tap the
.
2 Tap Settings
Accounts & sync > Add account >
Google > Existing.
3 Enter your email and password and tap
4 Read the disclaimer about signing in and
checkmark if you want to keep updated with
news and offers from Google Play. Then
tap OK.
5 After signing in, you can use Gmail and take
advantage of Google services on your phone.
6 Once you have set up your Google
account, your phone will be automatically
synchronized with your Google account on
the web. (Depending on your synchronization
settings.)
After signing in, your phone will sync with
your Google services, such as Gmail, Contacts,
Google Calendar, and Picasa photo albums.
You can also use Maps, download applications
from Play Store, back up your settings to
Google servers, and take advantage of other
Google services on your phone.
> General tab >
Apps Key
.
IMPORTANT
•Some applications, such as Calendar,
work only with the first Google Account
you add. If you plan to use more than one
Google Account with your phone, be sure
to sign into the one you want to use with
such applications first. When you sign in,
your contacts, Gmail messages, Calendar
events, and other information from these
applications and services on the web are
synchronized with your phone. If you don’t
sign into a Google Account during setup,
you will be prompted to sign in or to create
a Google Account the first time you start an
application that requires one, such as Gmail
or Play Store.
•
If you have an enterprise account through
your company or other organization, your IT
department may have special instructions on
how to sign into that account.
Google Account Setup
33
Calls
Making a call
1 From the Home screen, tap the Phone Key
to open the keypad.
2 Enter the number on the keypad. To delete a
digit, tap the
3 Tap the
4 To end a call, tap the
%
•
To enter “+” to make international calls,
touch and hold .
Call
TIP
Clear
Key .
Key to make a call.
End
Key .
Calling your contacts
1 From the Home screen, tap Contacts to
open your contacts.
2 Scroll through the contact list or tap the
Search
contacts field and enter the first
letter(s) of the contact you want to call. You
can also tap the letters at the right side of
the screen.
3 In the list that is displayed, tap the contact
you want to call.
4 In the Contact Info screen, tap the phone
number you wish to call.
34
Answering and rejecting a
call
When the screen is locked
When your phone rings, swipe the
icon
in any direction to answer the
incoming call.
Decline
Swipe the
to reject an incoming call.
icon in any direction
Answer
When the screen is unlocked
When your phone rings, tap the
Key . Tap
incoming call.
%
•If the Answer an incoming call gesture is
•Tap or swipe the Decline with message
Decline
NOTE
activated, you can bring the phone up to your
ear to answer incoming calls.
Key if you want to send a message
to the caller. If the caller is unknown,
the Decline with messageKey is not
available.
Answer
Key to reject an
Adjusting the in-call volume
To adjust the in-call volume during a call,
use the Volume Keys on the back side of the
phone.
Making a second call
1 During your initial call, tap the Menu Key
and select Add call.
2 Dial the number or search your contacts.
Call
Key
3 Tap the
4 Both calls will be displayed on the call
screen. Y
5 Tap the Call entry on the screen to toggle
between active calls or tap Merge calls
to merge the calls.
%
TIP
•
Tap Manage members to end individual
calls or separate calls from a conference
call.
6 To end active calls, tap
If there is no active call, it will end the call
on hold.
%
NOTE
•
You will be charged for each call you
make.
to connect the call.
our initial call will be put on hold.
the End Key .
Viewing your call logs
From the Home screen, tap the Phone Key
and the Call logs tab.
You can view a complete list of all dialed,
received, and missed voice calls.
Calls
%
TIP
•
Tap any single call log entry to view the
date, time, and duration of the call.
•
Tap the Menu Key , then tap Delete
all to delete all the recorded items or
Delete to delete individual or groups of
entries.
Call settings
You can configure phone call settings, such
as call forwarding, and other special features
offered by your carrier.
1 From the Home screen, tap the
and tap
All settings
2 Tap the Networks tab (if necessary) >
Set any of the available options.
3
Menu Key
.
Call
.
35
Contacts
You can add contacts on your phone and
synchronize them with the contacts in your
Google Account or other accounts that
support syncing contacts.
Searching for a contact
1 From the
Home screen, tap the Apps Key
and tap Contacts
contacts.
OR
From the Home screen, tap the Phone
Key > Contacts tab.
2 Tap the Search contacts field and enter
the contact name using the keypad. You
can also tap the letters at the right side
of the screen.
to open your
Adding a new contact
1 From the Home screen, tap the Phone
Key and enter the new contact’s
number. Tap the Menu Key >
Add to Contacts > New contact.
2 Select the account where you want to
add the new contact. Locations depend on
the type of accounts you have added to
your device.
36
%
NOTE
•
The entry fields varies depending on the
account.
3 If you want to add a picture to the new
contact, tap
or Select from Gallery. Then browse for
an image and select it.
4 Tap
information.
5 Enter the details about your contact.
6 Tap Save to save the contact entry
. Choose from Take photo
to enter more specific name
Favorite Contacts
You can classify frequently called contacts
as favorites.
To add a contact to your favorites
1 From the Home screen,
and then Contacts
contacts.
2 Tap a contact to view its details.
3 Tap the star to the right of the contact’s
name. The star turns gold and the contact
is added to your favorites.
tap the Apps Key
.
to open your
Contacts
To remove a contact from your favorites
list
1 From the Home screen,
and then Contacts
2 Tap the Favorites tab.
3 Tap a contact to view its details.
4 Tap the gold star to the right of the
s name. The star turns grey
contact’
and the contact is removed from your
favorites.
tap the Apps Key
.
Joining and Separating
Contacts
When you have two or more entries for
the same contact, you can join them into a
single entry. You can also separate contacts
that were joined.
1 From the Home screen, tap the
and then Contacts
2 Tap the Menu Key
3 Select a tab at the top of the screen.
•Tap Join suggestion to select entries
to merge.
•Tap Joined contacts to select entries
to separate.
Apps Key
.
> Join contacts.
4 Checkmark the entry (or entries) you want
to join or separate, then tap the Join or
Separate button.
AT&T Address Book (AAB)
AT&T Address Book (AAB) is an application
that automatically syncs your contacts to an
online address book for safekeeping! When
you first turn on the phone or change your SIM
card and open Contacts, the AAB application
is displayed.
After signing up for this service, your
information is synced on a regular basis.
You can find more information on this service
and access your online address book at
www.att.com/addressbook. You can find
the synchronization menu for the service by
tapping the Menu Key
General tab > Accounts & sync > AT&T
Address Book.
> All settings >
37
Messaging/Email
Messaging
Your phone combines text and multimedia
messaging into one intuitive, easy-to-use
menu.
Conversation view
Messages exchanged with another party are
displayed in chronological order so that you
can conveniently see an overview of your
conversation.
Sending a message
1 Tap Messaging on the Home screen,
then tap
to create a new message.
2 Enter a contact name or phone number
To
field. As you enter the contact
in the
name, matching contacts appear. You can
tap a suggested recipient. You can also add
multiple contacts.
%
NOTE
•
You will be charged for a text message
for every person you send the message
to.
3 Tap the text field and start entering your
message.
Menu Key
4 Tap the
menu. Choose from
38
to open the options
any of the available
options.
5 Tap
Send
to send your message.
%
Warning
•
The 160-character limit may vary from
country to country depending on how the
text message is coded and the language
used in the message.
•
If an image, video, or audio file is added
to a text message, it will be automatically
converted into a multimedia message and
you will be charged accordingly.
%
NOTE
•
When you get a text message during a
call, there will be an audible notification.
Using smilies
Liven up your messages using smilies and
emojis.
When writing a new message, tap the
Key > Insert smileys. To access emojis,
tap on the LG keyboard and choose an
emoji category to view the available emojis.
Menu
Messaging/Email
Changing the conversation theme
Sets how your conversations are displayed.
1 Open the Messaging app and tap the
Menu Key > Settings > Conversation
theme.
2 Tap the W
3 Tap the Bubble tab to choose the
allpaper tab to choose the
conversation background. Choose from the 6
options provided, a photo from your Gallery,
or take a picture to use.
conversation style. Choose from the 6
options provided.
Changing your message settings
Your phone's message settings are predefined,
so you can send messages immediately.
You can change the settings based on your
preferences.
•From the Home screen, tap Messaging
> Menu Key
> Settings.
Email
You can use the
email from providers other than Gmail. The
Email application supports the following
account types: POP3, IMAP and Microsoft
Exchange (for Enterprise users).
Email
application to read
To open the Email application
•From the Home screen, tap the Apps Key
> Email .
Email
The first time you open the
a setup wizard opens to help you add an email
account.
application,
Microsoft Exchange Email Account
Email address – Enter the account email
address.
Password – Enter the account password.
Server address – Enter the server address.
Domain – Enter the account domain (optional).
Username – Enter the account username.
Use secure connection (SSL) – Choose
whether or not to use SSL for Microsoft
Exchange.
Client certificate – Allows you to add a
client certificate (if necessary).
Other (POP3 & IMAP4) Email
Account
Email address – Enter the account email
address.
Password – Enter the account password.
Incoming server settings
POP/IMAP server – Select protocol type,
either POP or IMAP.
39
Messaging/Email
Security type – Choose from Off, SSL, or TLS.
Port number – Normally each account’s
default number will be displayed.
Outgoing server settings
SMTP server – Enter the outgoing email
server address.
Security type – Choose from Off, SSL, or TLS.
Port number – Normally each account’s
default number will be displayed.
To open your Combined inbox
If you have configured email to send and
receive email from more than one account, you
can view all messages sent to all accounts in
your Combined inbox.
• Open the Email application and touch
. Then touch Combined inbox.
Messages in the Combined inbox are color
coded on the left, by account.
When a new email arrives in the Inbox, there
will be sound and/or vibration notification
(depending on your current sound and vibrate
settings).
40
Composing and Sending Email
1 In the Email application, tap Compose .
2 Enter an address for the message’s intended
recipient. As you enter text, matching
addresses will be offered from your
contacts. Separate multiple addresses with
commas.
3 Tap Cc/Bcc to copy or blind copy to other
contacts/email addresses.
4 Tap the text field and enter your message.
5 Tap Attach to attach the file you want to
send with your message.
6 Tap Send to send the message.
If you are not ready to send the message,
tap Save to save it in a Drafts folder. Touch
a message in the Drafts folder to resume
working on it. Your message will also be saved
as a draft if you touch the Back Key
before sending it.
Tap Cancel to abandon and delete a message,
including any saved drafts. If you are not
connected to a network, for example if you’re
working in airplane mode, the messages you
send are stored in your Outbox folder until
you’re connected to a network. If it contains
any pending messages, the Outbox will be
displayed on the Accounts screen.
%
NOTE
•The messages sent using an Exchange
account will not be stored on the phone;
they will be stored on the Exchange server
itself. If you want to see your sent messages
in the Sent folder, you may need to open
the Sent folder and select Refresh from the
options menu.
Working with Account Folders
Each account has Inbox, Outbox, Sent,
Drafts, Trash and Junk folders. Depending
on the features your account service provider
supports, you may have additional folders.
Adding and Editing Email Accounts
To add an email account
1 From the Home screen, tap the Apps Key
> Email .
2 Select the desired email provider.
If an email account is already set up, the
wizard is not activated automatically.
In this case, tap the Menu Key
Settings > Add account
>
.
Messaging/Email
To change account settings
1 Open the Email application.
2 Tap the Menu Key
3 Tap General settings to adjust the settings
that affect all accounts. Or tap an individual
account to adjust settings only for that
account.
> Settings.
To delete an email account
1 Open the Email application.
2 Tap the Menu Key
Select the account(s) you want to delete
3
and tap Remove account.
4 Tap Ye s to confirm.
> Settings.
41
Social Networking
With your phone, you can enjoy social
networking and manage your micro-blog in
on-line communities. You can update your
current status, upload photos, and view your
friends’ status updates in real-time.
You can add your Facebook, Google+, and
Twitter accounts to your phone. If you don’t
have an account, you can visit their sites to
set one up.
%
NOTE
•
Additional costs may be incurred when
connecting and using online services.
Check your data charges with your
network provider.
Adding an account to your
phone
1 From the Home screen, tap the Menu
Key
> All settings > General tab >
Accounts & sync.
2 Tap Add account.
3 Tap any social networking service you want
to use.
4 Enter your email address and password
that you set up for your social networking
account, then tap
42
Log in
.
Adding a social networking
widget on the Home screen
If you add a social networking widget on
your Home screen, the widget will show
your status when your phone receives
updates from the network.
You can also access the social community
directly by tapping the widget.
1 Touch and hold an empty spot on the Home
screen.
%
NOTE
•
If there is no available space on a
particular Home screen panel, you won't
be able to add any widget; you must
delete or remove an item before you can
add another item. In this case, you have
the option of switching to another Home
screen panel.
2 Tap the Widgets tab and scroll to the right
or left until you see the social network you
want.
3 Tap the desired widget to add it to the Home
screen panel.
Social Networking
Viewing and updating your
status
1 Go to the Home screen panel where the
social networking widget is located. You can
see the current status of social applications
you set.
2 Tap the Status update icon or field to
update your status with comments or
upload pictures.
3 After entering comments and attachment
(if any), tap the Post icon.
%
TIP
•
You can use information about friends
only in your social network(s) or sync all
data to Contacts.
Syncing accounts on your
phone
You can sync information from your social
networking accounts with your Contacts and
other functions on your phone, if applicable.
1 From the Home screen, tap the
Key > All settings
Accounts & sync
2 Checkmark Auto-sync data to activate
automatic synchronization.
> General tab >
.
Menu
3 Tap the account you want to sync.
4 Check the desired options, such as Contacts.
A checkmark indicates that synchronization
has been enabled.
Removing accounts on your
phone
1 From the Home screen, tap the
Key > All settings
Accounts & sync
2 Tap the account(s) you want to delete, then
Menu Key >
Remove account
Menu
> General tab >
.
> OK.
Life Square
The Life Square app allows you to collect and
save call logs, messages, photos, videos, voice
recordings, your posts on social networking
sites.
To select what events are logged
Menu Key
1 Open Life Square and tap the
> Settings.
2 Under the Types of Content section, tap the
check box next to the items you want to log.
Choose from Calls, Messages, Photos,
Videos, Facebook, and Twitter.
43
Camera
The Multi Point AF (Autofocus) feature enables you to get a clearer and natural picture even if the
objects are not in the center.
To open the Camera application, tap Camera
Getting to know the viewfinder
–
Swap camera
Flash – Tap to turn the flash On , Off or set it to Auto .
Number of new pictures available at the current size.
Settings
Mode
44
Allows you to swap between the rear camera lens and the front camera
lens.
– Tap to open the settings menu. See Using the advanced settings on page
45.
– Allows you select the shot mode from Normal, Shot & Clear, Dynamic
tone(HDR), Panorama, VR panorama, Burst shot, Beauty shot, Dual
camera, Time catch shot, Intelligent auto, Sports and Night.
on the Home screen.
Mode Switch
Capture
Gallery
– Touch and slide to
– Allows you to take a photo.
– This enables you to access your
saved photos and videos within
the camera mode. Simply tap
and your Gallery will appear on
the screen.
switch between Camera
mode and Video mode.
Camera
Taking a photo
1 From the Home screen, tap Camera
2 Holding the phone firmly, point the
lens towards the subject you want to
photograph.
%
NOTE
•
To zoom in use the pinch-to-zoom
method.
3 A focus box will appear in the center
of the viewfinder screen. You can also
tap anywhere on the screen to focus on
that spot.
4 When the focus box turns green, the
camera has focused on your subject.
5 Tap Capture to take a picture.
Once you’ve taken the photo
Your captured photo will appear on the
screen if Auto review is set to On (refer
to Using the advanced settings below).
Otherwise, tap the image preview at the
bottom right corner of the screen to view
the picture.
Using the advanced settings
In the viewfinder, tap to open the
advanced options.
You can change the camera settings by
scrolling the list.
Cheese shutter - Allows you to take a
picture by voice.
.
Brightness - Defines and controls of the
amount of sunlight entering the lens. Slide
the brightness indicator along the bar
towards “-” for a lower brightness video or
towards “+” for a higher brightness video.
Focus - Tap to select the focus mode.
Auto: Allows the camera to focus
automatically. (The camera continuously
focuses on the objects in the photo).
Manual: Allows you to set the focus
mode manually before taking a photo.
Face tracking: The camera detects and
focuses on human faces automatically.
Image size - Tap to set the size (in pixels)
of the picture you take. Select a pixel
value from the following options: 13M
4160x3120 (4:3), W10M 4160x2340 (16:9),
8M 3264x2448 (4:3), 1M 1280x960 (4:3).
ISO - Control the camera's sensitivity to
light. Choose from Auto, 100, 200, 400
and 800.White balance - The white balance
ensures any the white areas in your picture
are realistic. To enable your camera to
adjust the white balance correctly, you may
need to determine the light conditions.
Choose from Auto, Incandescent, Sunny,
Fluorescent, and Cloudy.
45
Camera
Color effect - Allows you to set a color effect for the photo. Choose from None,
Mono, Sepia, and Negative.
Timer - The self-timer allows you to set a
delay after the shutter is pressed. Select
Off, 3 sec, 5 sec, or 10 sec. This is ideal if
you want to be included in a photo.
Auto review - If you set Auto review on,
it will automatically display the picture that
was just taken.
Geotagging - Activate to use your phone’s
location-based services. Take pictures
wherever you are and tag them with the
location. If you upload tagged pictures to a
blog that supports geotagging, you can see
the pictures displayed on a map.
%
NOTE
•
This function uses wireless networks.
You need to activate Google’s location
service.
From the Home screen, tap
the Menu Key
General tab > Location access >
GPS satellites and Wi-Fi & mobile
network location.
Shutter sound - Adjust the sound the
shutter makes when taking a picture.
Volume key - Set how to use the volume
key. Choose from Capture or Zoom.Help - Touch this whenever you want to
know how a function works. This icon will
> All settings >
46
provide you with a quick guide.
Reset - Restore all camera default
settings.
%
NOTE
When you exit the camera, some settings
•
will return to their defaults. Check the
camera settings before you take your
next photo.
•
The settings menu is superimposed over
the viewfinder, so when you change
elements of the image color or quality,
you will see a preview of the image
change behind the settings menu.
Viewing your saved photos
You can access your saved photos from
within the camera mode. Just tap the
image preview at the bottom of the camera
screen.
%
TIP
•
Flick left or right to view other photos or
videos. Tap the screen to display other
options menus.
– Tap to share the photo using
SmartShare (turn on Wi-Fi if it’s not
already on).
– Tap to edit the photo.
– Tap to take a new photo.
– Tap to share the photo.
– Tap to delete the photo.
Camera
Menu Key - Tap to access Set image
as, Move, Copy, Copy to Clip Tray,
Rename, Rotate left, Rotate right, Crop,
Slideshow, Add location, Print and
Details.
%
TIP
•
If you have a social networking account
and set it up on your phone, you can
share your photo with your social
networking community.
%
NOTE
•
Additional charges may apply when
multimedia messages are downloaded
while roaming.
Setting a photo as the wallpaper
1 Tap the photo you want to set as
wallpaper to open it.
2 Tap the Menu Key
> Home screen wallpaper or Lock
screen wallpaper.
3 Crop the image as desired and tap Ye s.
> Set image as
Multi-point Auto Focus
When you take a picture, the Multipoint Auto Focus (AF) function operates
automatically and will allow you to see a
clear image.
%
NOTE
•
When Multi-point AF is active, the focus
box will change to a green color.
47
Camera
Shot & Clear
The Shot & Clear feature allows you to
remove interfering objects from pictures.
1 Open the Camera application.
2 Ta p > Shot & Clear.
3 Ta p to take the picture.
4 Tap the outlined objects you want to
remove.
5 Tap to save the picture.
%
NOTE
•Please take a picture without moving the
camera.
•This function may not be supported if the
moving object's color and the background
color are similar.
•This function may not be supported if the
moving object's size is too small or too big.
•This function may not be supported if the
object's movement is small.
•When there are too many moving objects,
only a part of the movement can be
detected.
48
Super zooming
You can use a zoom up to 8 times while
taking pictures.
%
NOTE
•
This function operates automatically
while zooming in and out.
•
Use a steady hand. This feature does not
work with some functions.
•
Objects can be overlapped when taking a
picture of fast-moving subjects.
Video Camera
Getting to know the viewfinder
To open the Video Camera application, tap Camera on the Home screen and slide down.
Swap camera
– Allows you to swap between the rear camera lens and the
front camera lens.
Flash – Tap to turn the flash On, Off or set it to Auto.
Mode Switch
– Touch and slide to switch
between Camera mode and
Video mode.
Record
– Allows you to start recording.
Gallery
– This enables you to access your
saved photos and videos from
within the video camera mode.
Simply tap and your Gallery will
appear on the screen.
Settings
– Tap to open the settings menu. See
Using the advanced settings
page 50.
Recording mode
- Allows you to change the recording mode to Normal, Live
effect, Dual recording or Tracking zoom.
%
TIP
•
When recording a video, place two fingers on the screen and pinch to use the
Zoom function.
on
49
Video Camera
Recording a video
1 From the Home screen, tap
slide the
Mode Switch
change to Video mode. The Record icon will
change to .
2 The video camera’s viewfinder will appear
on the screen.
3 Holding the phone horizontally, point the
lens towards the subject of the video.
4 Tap Record
5 A timer showing the length of the video
is displayed at the top left corner of the
screen.
6 Tap Stop to stop recording.
%
NOTE
•Ta p
on the screen to take a puase while
you're recording.
Camera
and
button down to
once to start recording.
Using the advanced settings
Using the viewfinder, tap to open the
advanced options.
Adjust the video camera settings by scrolling
the list.
Audio zoom – Increases sound sensitivity
in zooming area and decreases noise when
recording.
50
Video size – Allows you to change the video resolution to UHD 3840x2160, FHD
1920x1080(60fps), FHD 1920x1080(30fps),
HD 1280x720, QVGA 320x240, QCIF
176x144(MMS).
Brightness
– Defines and controls of
60
the amount of sunlight entering the lens.
Slide the brightness indicator along the bar
towards “-” for a lower brightness video or
towards “+” for a higher brightness video.
Anti-shaking
blur due to the movement of the subject of the
video or hand movement.
White balance
any the white areas in your video are realistic.
To enable your camera to adjust the white
balance correctly, you may need to determine
the light conditions. Choose from
Incandescent, Sunny, Fluorescent
Cloudy
Color effect - Allows you to set a color effect for the photo. Choose from None,
Mono, Sepia, and Negative.
Auto review
it will automatically play the video you just
recorded.
Geotagging
location-based services. Take videos wherever
– Allows you to reduces image
– The white balance ensures
.
– If you turn Auto review on,
– Activate to use your phone’s
Auto
,
, and
Video Camera
you are and tag them with the location. If you
upload tagged videos to a blog that supports
geotagging, you can see the videos displayed
on a map.
Volume key - Set how to use the volume
key. Choose from Record or Zoom.
Help - Touch this if you want to know how
this function works. This icon will provide
you with a quick guide.
Reset - Restore all video camera default
settings.
After recording a video
Touch the image preview at the bottom of the
screen to view the last video you recorded.
Tap
to play back.
– Tap
to share your video using the
SmartShare function.
–
Tap to record a new video.
–
Tap to share the video.
–
Tap to delete the video.
Menu Key - Tap to access Move,
Copy, Rename, and Details.
Options during the video
playback
Touch the image preview at the bottom of the
screen to view the last video you recorded.
Audio Zoom: Increases the volume at
selected area during video playback.
Track Zoom: Selects an object on the
screen and play video expending it.
QSlide: Enables an overlay on your
phone's display for easy multitasking.
SmartShare: Shares media files with
DLNA certified devices.
Lock/Unlock: Locks the touch keys to
prevent unintentional touches.
Screen ratio: Allows you to adjust the
screen ratio. (Best Fit, Full Screen or
Original Size)
Tap to access Subtitles, Share, Delete, Settings, and Details.
To adjust the volume of a video while it is
playing, use the Volume Keys on the back side
of the phone.
51
Video Camera
Dual Recording
The Dual Recording feature allows you to
record videos with the front and rear cameras
at the same time.
1 Open the Camera application.
2 Change to video mode and tap
recording.
3 Tap Record
to start dual recording.
> Dual
%
NOTE
•Drag the small screen to move it to your
desired location.
•Touch and hold the small screen to resize it.
•Tap on the small screen to switch screens.
•Tap to change small window's frame.
•Tap on the screen to take a pause while
you're recording.
4 Ta p
to stop recording.
Tracking zoom
Defines focus to enlarge before taking a video.
Touch and hold the small screen to resize or
move it.
1 Open the Camera application.
2 Change to video mode and tap
Tracking zoom.
>
52
Video Camera
3 Set the magnifying glass image to the
area you want to zoom in on and track.
4 Tap Record
5 Tap
%
•Drag the small screen to move it to your
to start recording.
to stop recording.
NOTE
desired location.
•Touch and hold the small screen to resize it.
•Tracking zoom is only available when using
the rear camera; not the front camera.
Audio zoom
Increase sound sensitivity in zooming area and
decrease noise when recording.
1 Open the Camera application.
>
2 Change to video mode, tap
zoom
> On.
3 Ta p Record
to start recording.
4 Zoom in a certain area to increase sound
sensitivity and decrease noise.
%
NOTE
•
Only available in landscape view.
5
Tap
to stop recording.
Audio
53
Video Camera
Tracking focus
1 Open the Camera application.
2 Change to video mode and tap Record
to start recording.
3 Tap on the subject in the preview screen
to track it.
to refine the focus.
4 Tap
%
NOTE
•Depending on the selected object and
settings, this function may not work.
Live Zooming
Live Zooming allows you to zoom in or zoom
out on a portion of a video that is being played
to make the desired section appear larger or
smaller.
When viewing a video, use your index finger
and thumb in a pinching or spreading motion to
zoom in or out.
54
%
NOTE
•While a video is playing, slide the screen up
or down to adjust the screen brightness.
•While playing a video, slide the screen left
or right to rewind or fast-forward.
•Do not press too hard; the touch screen
is sensitive enough to pick up a light, but
firm touch.
Dual Play
Dual Play (connected wired or wirelessly to
two displays) can be run on a different screen.
%
NOTE
•Connect two devices using wired (Slimport-
HDMI) cable or a wirelessly (Miracast).
•The connectable device can be a TV or a
monitor supported by an HDMI cable or
Miracast.
Video Camera
•The Gallery, Videos, Polaris Viewer 5 is
supported on Dual Play.
•Tap once when two displays are a
different status (i.e. the monitor is playing
a video and your phone's video app is
displaying empty screen), then Dual Play
will start.
•Not all videos are supported by Dual Play.
•Dual Play operates at 1280X720 or higher
display resolution.
55
Multimedia
You can store multimedia files to a internal
memory to have easy access to all your
image and video files.
Gallery
The Gallery is where you can access the
Gallery of stored video images. You can
view them, share them with your friends,
and delete and edit them.
1 From the Home screen, tap the Apps Key
>
Gallery
2 Scroll up and down to view more albums.
3 Tap an album to open it and view its details.
(The pictures and videos in the album are
displayed in chronological order.)
.
Music
Your phone has a music player that lets
you play all your favorite tracks. To access
the music player from the Home screen,
tap the Apps Key and tap Music .
How to save music/video files to
the phone
Connect your phone to the PC using
the USB cable.
You'll receive a notification that the USB
56
is connected and the USB connection type
prompt is displayed. Tap Media sync (MTP) or Send images (PTP) and open
the folder you wish to view from your
computer.
Save music or video files from the
PC to the phone.
•
You may copy or move files from the PC
to the phone's removable storage using
a card reader.
•
If there is a video file with a subtitle
file (.smi file with the same name
as the video file), place them in the
same folder to display the subtitle
automatically when playing the video
file.
•
When downloading music or video
files, copyright must be secured. Please
note that a corrupted file or file with a
wrong extension may cause damage to
the phone.
Playing a song
1 From the Home screen, tap the Apps
Key and tap Music .
2 Tap the Songs tab.
3 Tap the song you want to play.
Multimedia
4 Tap to pause the song.
to skip to the next song.
5 Tap
to go back to the beginning of
6 Tap
the song. Tap twice to go back to
the previous song.
To change the volume while listening to
music, press the Volume Keys on the back
side of the phone.
Touch and hold a song to access the
following options: Play, Add to playlist,
Share, Set as ringtone, Delete,
Details, and Search.
Working with Playlists
You can create playlists to organize your
music files into sets of songs, which
you can play in the order you set or in a
shuffle.
To create a playlist
1 When viewing the library tap the
Playlists tab.
2 Tap the Menu Key
3 Enter a name for the playlist, then tap
OK.
4 Select the songs you want to add to the
playlist and tap Add. The new playlist is
added to the Playlists library.
> New playlist.
To add a song to a playlist
Touch and hold a song and tap Add to
playlist. Then choose the name of the
playlist. You can also add the song that is
playing in the Playback screen by tapping
the Menu Key
playlist and selecting the desired playlist.
then tapping Add to
To remove a song from a playlist
1 Open a playlist.
2 Touch and hold the song you want
to remove, then tap Remove from
playlist.
To rename a playlist
1 Open the Playlists library.
2 Touch and hold the playlist to display
the options menu, then tap Rename.
3 Enter the desired name and tap OK.
To delete a playlist
1 Open the Playlists library.
2 Touch and hold the playlist to display
the options menu, then tap Delete.
s to confirm.
3 Tap Ye
57
Multimedia
%
NOTE
•
Music file copyrights may be protected
by international treaties and national
copyright laws. Therefore, it may be
necessary to obtain permission or a
licence to reproduce or copy music. In
some countries, national laws prohibit
private copying of copyrighted material.
Before downloading or copying the file,
please check the national laws of the
relevant country concerning the use of
such material.
58
Google Applications
About Google applications
Google applications, including mobile
versions of Gmail, Hangouts, Google
Calendar, and Google Maps, are loaded
on your phone.
1 To set up a Google account, tap any
Google application, enter your user
name and password and sign in.
2 After signing in, your contacts, email,
and calendar in your Google account
will automatically synchronize with
your phone.
Maps
You can use Google Maps to find your
current location, to view real-time traffic
conditions, to get detailed directions by
foot, public transportation, bicycle, or car,
and to navigate by using spoken, turn-byturn driving instructions using the Google
Maps Navigation service. You can search
on a street map or a satellite image to
locate an address or a landmark, and
you can view some locations as if you
were strolling down the street. There are
some locations that Maps does not have
information about.
Launch Google Maps
1 Ta p
> >
%
NOTE
•
Before using any navigation programs,
make sure your phone is set to allow
location detection, and then select
which sources you want to use.
•
Tap > > All settings > General
tab > Location access. Tap the Access
to my location switch and select Wi-Fi
& mobile network location and/or
GPS satellites for location sources.
2 Ta p
circle that indicates your location.
An arrow indicates the direction the
device is facing. A transparent blue
circle around the dot indicates that
your actual location is within the circle.
Maps.
. The map centers on a blue
59
Google Applications
Tap to access various features on
Google Maps.
My Location
To get an address and additional
information for a location:
1 Touch and hold a location on the map.
A bar with the address and a thumbnail
from Street View (if available) opens at
the bottom of the screen.
Drag the bar upwards to access
2
additional options.
To utilize Google Maps:
1 Ta p
> >
Maps.
2 Pinch out or in to zoom in or out of the
60
current map view
.
OR
Tap each icon at the top of the screen.
•
(Search) to search for a location.
•
(Directions) to get directions.
•
(Your activity) to access your
favorite places.
•
(Layers) to view locations and
additional information overlaid on
the map.
To search for a location:
1 While viewing a map, tap .
2 In the search box, enter the place you're
.
looking for
•
You can enter an address, a city, or a
type of business or establishment. For
example, “theater in New York.”
3 Tap
. Red markers indicate search
matches on the map.
4 Tap a marker to display a bar that
contains the name and travel
information. Drag the bar upwards to
open a screen with more information
about the location, as well as options
for obtaining directions.
Google Applications
To get directions:
1 While viewing a map, tap .
2 Enter a starting point in the Start point
field, or leave as is to allow GPS to find
your location, and your destination in
the End point field.
•
To reverse directions, tap .
3 Tap the icon for car, public transit,
biking, or walking directions.
4 The directions to your destination
appear as a blue route. Select a gray
route if you prefer it.
5 Drag the bar up to view directions
as text or tap
destination.
to navigate to the
To add layers for familiar features
such as Traffic or Terrain
1 While viewing a map, tap . A menu
opens with a list of layers.
2 Tap the layer you'd like to view. You can
add multiple layers.
•
If you turn a layer on, the layer
will remain on the map until you
specifically turn it off or clear the map.
Play Store
Play Store lets you browse through and
download thousands of fun and useful
applications and games. You can check
other users' comment regarding an
application or you can post your own
comments. If you install applications and
games from Play Store, they appear in
the phone's menu below the preloaded
applications, and you can find them by
scrolling down with your finger. You can
open downloaded applications from the
Play Store by tapping the Menu Key
> My apps.
%
NOTE
•
To purchase a paid app, you’ll need to
set up a payment method with Google
Checkout™. You have the option to use
a credit card or charge to your carrier
bill.
%
NOTE
•
When you want to exit a game or
application, use the Home Key or
Back Key , which will return you to
the Home screen. Or select Menu (or
Options) within the game or application
and select Exit. (Exit option may vary by
61
Google Applications
game/application). Ending applications
that continue to run in the background
(after going back to the Home screen)
will help conserve battery life and
reduce unwanted data usage.
Gmail
Gmail can be configured when you first
set up your phone. Depending on your
synchronization settings, Gmail on your
phone is automatically synchronized with
your Gmail account on the web. From
the Home screen, tap the Apps Key
> Google > Gmail . The inbox
conversations list is your default view.
Tap the Menu Key
additional options: Refresh, Label settings, Settings, Send feedback,
and Help.
Compose
new message.
Search
account.
Accounts & Labels
view your accounts and labels.
%
•
- Allows you to search your
NOTE
Drag the screen downwards to refresh
and check for new email.
62
for the following
- Allows you to compose a
- Allows you to
Hangouts
The Hangouts application lets you have
real-time text conversations with your
friends.
To Open the Hangouts application
From the Home screen, tap the
> Google > Hangouts .
To sign out of Hangouts
From the Home screen, tap the Menu
Key > Settings > tap the desired account > Sign out.
Chatting with Friends
1 From the Home screen, tap the
Key
> Google > Hangouts .
to view your contacts list. It
2 Tap
includes all of the Google Accounts
you've added.
•
Tap the name of the person in your
contacts list. If your friend is not yet on
Hangouts, you can invite your friend via
SMS.
OR
•
Tap the text field to enter a name, email,
or number.
3 Tap Message and then enter your
message.
Apps Key
Apps
Google Applications
4 Tap the Send .
Hangouts chatting list
Touch and hold the friend in the chat
screen. You can set below options.
Tap to turn the notifications off.
Tap to archive the conversation.
Tap to delete the conversation.
Blocking your Friends
•
To block a friend from exchanging messages
with you, tap the friend in the chatting
list. Tap the
Menu Key
> People &
options. Then tap the block option.
•
To remove a friend from the blocked list,
from the chatting list, tap the
> Settings > tap the desired account >
Menu Key
Blocked people. Then tap Unblock next to
the person’s name.
Hangouts Settings
•
From the chatting list, tap the
and choose from the available options.
Menu Key
To configure settings for the Hangouts app,
tap Settings.
•
While chatting, tap the
Menu Key
to choose from People & options, New
group Hangout, Turn history off, Archive,
Delete, Send feedback, and Help.
63
Utilities
QuickTheater
The QuickTheater feature allows you to directly
play movies and view photos.
1 Hold the phone horizontally while on the
lock screen.
2 Touch the center of the screen with both
thumbs and slide in opposite directions.
3 You can choose to view photos, videos, or
access Y
ouTube using QuickTheater.
%
NOTE
•
The screen lock mode should be set as
Swipe in order to use the QuickTheater
function.
1 From the Home screen, tap the
> Lock screen settings > Select
screen lock.
2 Select Swipe.
Menu Key
QSlide
The QSlide function enables an overlay on your
phone's display for easy multitasking.
1 While using an app that supports QSlide, tap
to access QSlide.
OR
Open the Notifications Panel and touch an
app from the QSlide apps bar.
2 Use the slider to adjust the
transparency of the overlay. You can also tap
to go back to full view.
64
3 You can make a call, or choose other phone
options.
to exit the QSlide function.
4 Tap
Utilities
OR
%
NOTE
•The QSlide function can support up to two
windows at the same time.
QuickMemo
The QuickMemo feature allows you to create
memos and capture screen shots.
You can use QuickMemo to easily and
efficiently create memos during a call, with a
saved picture or on the current phone screen.
1 Touch and drag the Status Bar down and
. You can also access it by swiping
tap
upwards from the main keys area at the
bottom of the Home screen.
2 Create a memo using the following options:
- Tap to keep the memo on top and and
continue using the phone. Tap to
exit the overlay mode.
- Tap to select what type of background
to use.
- Tap to undo the most recent action.
- Tap to redo the most recently deleted
action.
- Tap to select the pen type and color
or the cropping tool.
- Tap to use the eraser to erase the
memo that you created.
65
Utilities
- Tap to share the memo with others via
any of the available applications.
- Tap to save the memo you’ve created.
- Tap to hide or display the
%
NOTE
•
Please use a fingertip while using the
toolbar.
QuickMemo feature. Do not use your
fingernail.
3 Tap to save the current memo to the
Notebook or Gallery.
Discard QuickMemos:
•
Tap the Back Key
.
View the Saved Memo
From the Home screen tap the Apps Key
> Gallery or Notebook and select
the QuickMemo album.
QuickRemote
QuickRemote turns your phone into a Universal
Remote for your home TV, cable box, audio
system, DVD/Blu-ray players, air conditioner
and projector.
1 From the Home screen, tap the Apps Key
> QuickRemote > .
66
OR
Touch and slide the Status Bar downwards and
> ADD REMOTE.
touch
2 Select the type of device and its
manufacturer, then follow the on-screen
instructions to configure the device(s).
%
TIP
•To quickly use the QuickRemote feature,
touch and slide the Status Bar downward
and tap on the Quick Settings bar to
Utilities
activate it.
Touch the
Menu Key
additional options.
%
NOTE
•QuickRemote features an ordinary remote
control and infrared (IR) signals to operate
the same way. Therefore, be careful not to
cover the infrared sensor when you use the
QuickRemote feature. This function may not
be supported depending on the model, the
manufacturer or service company.
to access
Universal remote
You can create your own personalized
universal remote and choose where to place
all of the buttons.
1 From the Home screen tap the Apps Key
> QuickRemote .
> Universal remote.
2 Tap
3 Enter the Remote name and touch OK.
4 Place the buttons you want on the remote at
the desired location and tap Next.
5 Tap the button to be learned.
6 Point original remote 4 inches away from the
IR receiver at the back of the phone.
7 Press and hold the button on the original
remote for 2 seconds.
Using the Magic Remote feature
Magic Remote controls your TV using a
Touchpad and Smart Text(keyboard). Magic
Remote is compatible only with LG Smart TVs
released in 2012 and after.
1 Select the remote you want, and then tap
the
Menu Key
setting.
2 Tap the Supported models button and
check whether your TV supports this feature.
3 Connect your phone and LG Smart TV to the
same Wi-Fi network.
> Magic Remote
67
Utilities
4 Select the device and enter the certificate
number in your phone.
• Touchpad: Move the TV pointer with the
touchpad.
•
Smart Text: Provides keypad when
typing text.
QuickTranslator
Simply aim the camera of your smart phone at
the foreign sentence you want to understand.
You can get the real-time translation
anywhere and anytime. You can buy additional
dictionaries for offline translation from the
Google Play Store.
1 From the Home screen tap the
68
Apps Key
> QuickTranslator .
, Word, Line or Block.
2 Tap
3 Hold the phone toward the subject you want
to translate for a few seconds.
%
NOTE
•Only one dictionary is provided free of
charge. Additional dictionaries must be
purchased. Please select the dictionary you
would like to install as your complimentary
dictionary.
•There may be a difference in the rate of
recognization depending on the size, font,
color, brightness and angle of the letters that
need to be translated.
VuTalk
With the VuTalk feature, you can make an
interactive and more creative notes with the
other party. Visual communication is possible
while sharing a photo, a map or camera
preview.
%
NOTE
•Only available with a phone that supports
this feature as well.
•You can also use the VuTalk feature during
a call.
•The screen will lock if there is no input.
•Requires data connection. Data charge will
Utilities
apply to both phones.
Register VuTalk Before Use
1 From the Home screen, tap the
> Contacts .
2 Tap
to register for VuTalk.
%
NOTE
•You can also register VuTalk service while
you are in a call by tapping
3 Read the LG apps terms and conditions and
privacy policy. If you agree, tap the check
boxes, then tap Accept (if necessary).
Apps Key
.
VuTalk Settings
1 From the Home screen, tap the
> Contacts .
2 Tap the
Menu Key
> VuTalk settings.
3 Set the following options as your
preferences.
•
Notification sound: Select the desired
notification sound.
•
Vibrate: Select the desired vibrate type.
•
Show request: Checkmark this option to
display a pop-up when a VuTalk request
is received.
•Contact sync: Checkmark this option to
sync contacts.
Communicate Visually with VuTalk
1 From the Home screen, tap the
> Contacts .
2 Tap
to display only the contacts who use
the VuTalk feature.
3 Tap a contact to start VuTalk with.
Apps Key
Apps Key
69
Utilities
4 In the contact's details screen, tap
.
After the other party accepts your VuTalk
request, you can start VuTalk with him/her.
5 Use the VuTalk screen to chat and visually
communicate with your friend.
•
Tap to attach a photo, take a new
photo, map view, or a sticker.
•
Tap the Pen icon and Eraser icon
to write on the images you attached.
or the
6 When you finish VuTalk, tap
Back Key
to exit the VuTalk feature.
The created VuTalk screen is stored in the
Notebook app.
%
NOTE
•
If you tap the
Home Key
and go back
to the Home screen, the VuTalk feature still
runs in the background.
Voice Mate
Voice Mate allows you hands-free interaction
with your devices. You can ask Voice Mate
to perform phone functions using your voice,
such as calling a contact, setting alarms or
searching the web. When you access this
feature for the first time, it displays help
information to assist you in learning how to
use this function.
%
NOTE
•You can use Voice Mate after agreeing the
End User License Agreement and Privacy
policy.
•You can view examples of various commands
by swiping the Voice Mate main screen to
the left.
•You can also launch Voice Mate by swiping
upwards from the main keys area at the
bottom of the screen.
70
Utilities
Use Voice Mate
1 From the Home screen, tap the Apps Key
> Voice Mate .
2 Tap the Speak icon
to turn it on. Say
what you want it to do for you.
%
TIP
•Use Voice Mate in a quiet environment so it
can accurately recognize your commands
Voice Mate Settings
1 From the Home screen, tap the Apps Key
> Voice Mate .
2 Tap the Menu Key
•
Skip confirmation - Tap to make a call
> Settings.
without confirmation when the exact name
or number searched for is found.
•
Language - Choose a language to use.
•
Voice feedback - Tap to allow voice
feedback even when no headset is
connected.
•
User name - If a user name is set, Voice
Mate will recognize the user name.
•
Save events to - Set the account where you
want to save events.
•
Voice activation - Tap to allow the Speak
button to activate by saying the voice launch
command.
•
Button vibration - Tap to allow the device
to vibrate when the Speak button is tapped.
•
Voice launch command - Set the voice
launch command to LG Mobile or Hello
Genie. Say this command to launch Voice
Mate.
•
Voice launch when charging - Tap to
allow you to open Voice Mate while charging
with the screen on.
•
Voice launch on Lock screen - Tap to
allow you to open Voice Mate on the Lock
screen.
•
Skip Lock screen - Tap to skip Face
Unlock, Pattern, PIN or Password when
opening Voice Mate via the voice launch
command from the Lock screen.
•
Facebook - Set the Facebook account.
•
Twitter - Set the Twitter account.
Notebook
You can use the Notebook app to make
your own notes using handwriting tools or
attaching multimedia files. With the Notebook
application, you can manage and personalize a
wide variety of information.
71
Utilities
Creating a note
1 From the Home screen, tap the Apps Key
> Notebook .
2 Tap New note to create note.
3 Create a note using the available tools.
•
/
Read only/Edit mode:
to view the note in read-only mode and
prevent any unintentional drawings. To go
back to the Edit mode, tap
•
/
Undo/Redo:
previous actions.
•
Text:
Tap to select the font type,
size and color. Then tap any place where
you want to enter text on the blank note
to display the keyboard.
72
Tap
.
Undo and redo the
•
Pen:
Tap to select the pen type,
thickness, opacity and color. Then draw
a picture.
•
Eraser: Tap to select the eraser. Tap
Clear all to clear all edits.
•
Insert
: Tap to attach multimedia files. Choose from Sticker, Image, Take photo,
Video, Record video, Audio, Record
voice, Location, Date and time, and
Schedule.
•
Tap to send the note via Gmail, Email,
or other apps.
•
Tap to save the note.
•
Lock/Unlock Front Keys: Tap to lock or
unlock the front keys ( , , ).
•
Zoom note: Tap to open the zoom box
for a detailed note. To close the zoom box,
tap
again.
•
Cover: Tap to select the desired cover
style.
SmartShare
SmartShare uses DLNA (Digital Living Network
Alliance) technology to share digital content
through a wireless network. Both devices must
be DLNA certified to support this feature.
You can enjoy SmartShare feature on Gallery,
Music, Video, and Polaris Viewer 5.
Utilities
1 On the content you want to play or beam,
tap .
2 Tap Play or Beam in the dialog box.
•
Play: You can stream your content via TV,
Bluetooth speaker, etc.
•
Beam: You can send your content to
Bluetooth devices or SmartShare Beam*supported LG phones or tablets.
*SmartShare Beam quickly transfers
multimedia contents through Wi-Fi Direct.
3 Tap the device to play or receive on the list.
•
If the device is not on the list, make sure
on the device that Wi-Fi, Wi-Fi Direct, or
Bluetooth connection is turned on. Then tap
Rescan.
4 Tap Send.
Enjoy the Content from Nearby Devices
Y
ou can enjoy content from nearby devices,
such as a computer or mobile device, on your
phone by following the instructions below.
1 To connect the nearby devices to your phone,
tap Nearby devices on the Gallery,
Music, or V
ideos application as below.
< Gallery >
•
Ensure that your phone and nearby devices
< Music >< Videos >
are connected to the same Wi-Fi network.
•
Make sure DLNA feature on the nearby
device is turned on.
2 Tap the device you want to connect to.
If the device is not on the list, tap Search
nearby devices.
3 After establishing a connection, you can
enjoy the contents from the nearby device
on your phone.
Setting the alarm
1 From the Home screen, tap the
and tap
Clock .
2 To add a new alarm, tap the Alarms tab
tab (if necessary).
3 Tap
and set the alarm time.
4 Set
any desired options and tap
Apps Key
Save.
73
Utilities
%
NOTE
•
When viewing the alarms screen, tap the
Menu Key
> Delete all to delete all
of the alarms or tap Settings to adjust the
alarm settings.
Using the calculator
1 From the Home screen, tap the
and tap
Calculator .
2 Tap the number keys to enter numbers.
3 For simple calculations, tap the function you
want
%
NOTE
•
For more complex calculations, tap the
Menu Key ,
, followed by .
then tap Scientific
calculator.
Apps Key
Adding an event to your
calendar
1 From the Home screen, tap the
and tap
Calendar .
2 To view an event, tap the date. The events
occurring on that date are displayed below
the Calendar in Month view. Tap the event
to view its details. If you want to add an
event, tap
Calendar.
at the top right corner of the
74
Apps Key
3 Tap the
Event name
event name. Check the date and enter the
start and end time you want your event to
begin and finish.
4 Tap the
Location
5 To add a note to your event, tap the
Description
6 To repeat the event, set
REMINDERS
7 Tap
Save
The event names will be displayed on the
days of the events. An alarm will sound at
the event start time if you set it.
field and enter the
field to enter the location.
field and enter the details.
REPEAT
, if necessary.
to save the event in the calendar.
Changing your calendar view
1 From the Home screen, tap the
and tap
Calendar .
2 At the top of the Calendar, tap
choose from Day, Week, Month, Year,
Agenda, or Life Square.
Task Manager
You can manage your applications using Task
Manager. You can easily check the number of
applications that are currently running and shut
down certain applications.
and
Apps Key
and
Utilities
Tasks
The Tasks application can be synchronized with
your MS Exchange account. You can create a
task, revise it, and delete it using your phone,
or from MS Outlook or MS Office Outlook
Web Access.
To Synchronize MS Exchange
1 From the Home screen, tap the Apps Key
> Settings > General tab.
2 Tap Accounts & sync > Add account.
3 Tap Microsoft Exchange, then sign-in
using your email address and password.
4 Checkmark the Sync T
asks checkbox.
Polaris Viewer 5
With Polaris Viewer 5, you can view document
files on your phone. The Polaris Viewer 5
application supports the following file formats:
txt, doc, docx, xls, xlsx, ppt, pptx, pdf.
Slide Aside
Slide Aside allows you to quickly switch
between three open applications (or tasks)
using a three finger gesture.
1 While an application is open, place three
fingers on the screen and slide to the left.
The current screen is saved and the Home
screen appears.
2 To re-open the saved apps, place three
fingers on the screen and slide to the
right. Tap the desired app you want
to open.
Dual Window
The Dual Window feature splits the
screen to enable multi-tasking, drag
and drop interaction, auto-linking and
recently used apps.
1 Touch and hold the Back Key to split
the screen.
2 Touch or drag an app icon to the desired
space.
75
Utilities
•
: Switch two screens.
•
/ : Drag to resize split screens.
•
: Tap to view app the apps list, full
screen view, or close the apps.
76
The Web
Browser
The Browser gives you a fast, full-color world
of games, music, news, sports, entertainment,
and much more, right on your mobile phone.
%
NOTE
Additional charges apply when connecting
to these services and downloading
content. Check data charges with your
network provider.
Using options
Tap the Menu Key
options:
Refresh - Alows you to reload the current web
page. When the page is currently loading, the
option displayed is Stop.
New tab - Opens a new tab.
Bookmarks - Allows you to view, add, edit,
and delete your bookmarks.
Save to bookmarks - Allows you to
bookmark the current web page.
Homepage - Allows you to open the home
page.
Set as homepage - Allows you to set the
current web page as your home page.
History - Allows you to view the web pages
you've visited.
to view the following
Share page - Allows you send the web
address (URL) of the web page to others.
Find on page - Allows you to search for text
on the web page.
Desktop view - Allows you to change the
current mobile page to a desktop page.
Save for offline reading - Allows you to save
the current page for offline reading.
Capture plus - Allows you to capture the
current web page from top to bottom without
cutting.
Print - Allow you to print the web page using
any printers on the network.
Settings - Opens the Browser settings.
Exit - Allows you to exit the browser.
%
TIP
•To return to the previous web page, tap the
Back Key .
Adding bookmarks
1 When viewing the page you want to
save, tap the Menu Key
bookmarks.
and select in which account to
2 Tap
bookmark the web page.
3 Enter the desired information for Label,
Address, and Add to (location to save
> Save to
77
The web
bookmark) and tap OK.
OR
at the top right corner of the
1 Tap
browser, then tap .
, select in which account to
2 Tap
bookmark the web page, then tap
3 Enter the desired information for Label,
Address, and Add to (location to save
bookmark) and tap OK.
.
Changing the Browser
settings
1 Open the Browser and tap the Menu Key
> Settings.
2 Set any of the available options.
78
Settings
The Settings application contains most of the
tools for customizing and configuring your
phone. All of the settings in the Settings
application are described in this section.
To open the Settings application
•
From the Home screen, tap the Apps
Key > Settings .
•
From the Home screen, tap the Menu
Key > All settings.
%
TIP
•
If you would like to view the settings
menu in a list, access Settings and tap
the Menu Key > Switch to list view. The options below follow the
default tab view and may differ when
in list view.
Networks tab
Airplane mode
Airplane mode allows you to quickly turn
off all wireless connections.
1 From the Home screen, tap the Menu
Key > All settings.
2 Select the Networks tab.
3 Tap the Airplane mode switch
to turn it on.
4 Tap the switch again to turn it off.
OR
1 Press and hold the Power/Lock Key
and tap Turn on Airplane mode.
2 Press and hold the Power/Lock Key
and tap Turn offAirplane mode
to turn it off.
Wi-Fi
To use Wi-Fi on your phone, you need
access to a wireless access point, or
"hotspot." Some access points are open
and you can simply connect to them.
Others are hidden or implement other
security features, so you must configure
your phone in order to connect to them.
Turn on Wi-Fi
From the Home Screen, open the
Notifications panel and tap to turn
Wi-Fi on. A blue colored icon indicates
that Wi-Fi is on.
OR
From the Home screen, tap the Menu
Key and tap All settings >
Networks tab.Then tap the Wi-Fi
switch to turn it on.
79
Settings
To connect to a Wi-Fi Network
1 From the Home screen, tap the Menu
Key and tap All settings >
Networks tab > Wi-Fi.
2 Tap the Wi-Fi switch
to turn it on
and begin scanning for available Wi-Fi
networks.
•
A list of available Wi-Fi networks will
be displayed. Secured networks are
indicated by a lock icon .
3 Tap a network to connect to it.
•
If the network is open, you are prompted
to confirm that you want to connect to
that network by tapping Connect.
•
If the network is secured, you are
prompted to enter a password or
other credentials. (Ask your network
administrator for details).
•
Tap the Menu Key
to access
additional options.
4 The Status Bar at the top of your screen
will display an icon that indicates your
Wi-Fi connection status.
Turn off Wi-Fi when you're not using it to
extend the life of your battery.
80
%
TIP
•
If you are not in range of a Wi-Fi
network and use a network connection,
additional data charges may apply.
%
NOTE
•
Access to the Internet and a wireless
router required. As an added
convenience, AT&T has shipped certain
smartphones with Wi-Fi enabled as a
default setting. Leaving Wi-Fi enabled
when not connected to a Wi-Fi network
may affect battery charge. Qualifying
data plan required.
•
This device supports WEP, WPA/
WPA2-PSK and 802.1x EAP. (Some
EAP methods are not supported.) If
your Wi-Fi service provider or network
administrator sets encryption for
network security
pop-up window. If encryption is not
, enter the key in the
set, this pop-up window will not be
shown. You can obtain the key from
your Wi-Fi service provider or network
administrator.
Bluetooth
Bluetooth is a short-range communications
technology that allows you to connect
wirelessly to a number of Bluetooth
Settings
devices, such as headsets and hands-free
car kits, and Bluetooth-enabled handhelds,
computers, printers, and wireless devices.
The Bluetooth communication range is
usually up to approximately 30 feet.
Turn on Bluetooth
From the Home screen, tap the Menu
Key
> All settings > Networks tab,
then tap the Bluetooth switch to
turn on the Bluetooth functionality.
To make your phone visible to other
devices
1 From the Home screen, tap the Menu
Key > All settings > Networks
tab > Bluetooth.
2 Make sure Bluetooth is turned on.
3 Tap the checkbox next to the device
isibility is set to 2 minutes by
name. V
default.
%
NOTE
•
To change the visibility time length,
tap the Menu Key > Visibility
timeout. Choose from 2 minutes, 5
minutes, 1 hour, or Never time out.
To search for other Bluetooth devices
1 Access the Bluetooth menu and make
sure that it is on.
2 Tap Search for devices.
%
NOTE
•
To find other devices, place them in
discoverable mode.
Pairing Bluetooth devices
1 Access the Bluetooth menu and make
sure that it is on.
2 Tap Search for devices. Y
our device
will display a list of discovered in-range
Bluetooth devices.
3 Tap the device you want to pair from
the list.
4 Depending on the device, you might
have to tap Pair to accept the passkey
(if they match), enter a passkey or PIN
Code, or the devices will automatically
pair.
%
NOTE
•
Pairing between two Bluetooth devices
is a one-time process. Once a pairing
has been created, the devices will
continue to recognize their partnership
and exchange information.
%
TIP
•
Please consult documentation included
with Bluetooth device for information on
81
Settings
pairing mode and passcode (typically 0 0
0 0 – four zeroes).
How to send data from your phone
via Bluetooth
You can send data via Bluetooth by
running a corresponding application, not
from the Bluetooth menu.
•
Sending pictures: Open the Gallery
application and tap a picture. Then tap
> Bluetooth. Check the devices if
Bluetooth is turned on. Then tap the
device you want to send data to from
the list.
•
Sending contacts: Open the Contacts
application. Tap the contact you want
to share, then tap the Menu Key >
Share > Bluetooth. Check if Bluetooth
is turned on and tap Search for devices.Then tap the device you want
to send data to from the list.
%
TIP
•
The supported Bluetooth version is
Bluetooth 4.0 and certified by Bluetooth
SIG. It is compatible with other
Bluetooth SIG certified devices.
•
Due to different specifications and
features of other Bluetooth-compatible
82
devices, display and operations may be
different, and functions such as transfer
or exchange may not be possible with
all Bluetooth compatible devices.
•
Supported profiles are HFP/HSP, A2DP,
AVRCP, OPP, FTP(Server), HID, PAN, MAP,
SPP and PBAP.
To switch between a Bluetooth
headset and the phone
When a Bluetooth headset is paired and
connected to your phone, you can conduct
calls on the headset for hands-free
conversation. During a call, you can opt
to use the Bluetooth headset or just the
phone. When using the Bluetooth headset
during a call, the Ongoing Call notification
icon is blue in the Status Bar (the icon is
green when using the phone).
%
NOTE
•
Tap the Bluetooth button to switch the
call from the phone to the Bluetooth
device, or vice versa.
Data Manager
You can select whether to enable or
disable mobile data. You can check
the current data usage, set to enable/
Settings
disable mobile data, or set the mobile
data limit. Your mobile data connection
will be disabled when the specified limit
is reached.
Mobile data - Tap the switch
enable mobile data.
Limit mobile data usage - Checkmark to
set the mobile data usage limit.
Data usage cycle - Allows you to
change the data usage cycle to display in
the graph.
%
NOTE
•Tap an application to view data usage
information.
to
Call
Configure phone call settings such as call
forwarding and other special features
offered by your carrier.
Voicemail – Allows you to select your
carrier’s voicemail service.
Fixed dialing numbers – Turn on
and compile a list of numbers that can
be called from your phone. You’ll need
your PIN2, which is available from your
operator. Only numbers within the fixed
dial list can be called from your phone.
Caller ID - Allows you to choose how to
display your number in outgoing calls.
Incoming call pop-up – Displays an
incoming call popup when an app is in
use.
Call reject – Allows you to set call
rejection and manage the reject list.
Decline with message – When you
want to reject a call, you can send a quick
message instead. This is useful if you
need to reject a call during a meeting.
This menu allows you to manage the
messages you can send.
Privacy keeper – Hides the caller name
and number for an incoming call.
Auto answer – Sets the time before a
connected hands-free device automatically
answers an incoming call. Choose from
Disable, 1 second, 3 seconds, and 5
seconds.
Connection vibration – Vibrates your
phone when the other party answers
the call.
TTY mode - Allows you to activate TTY
mode.
Hearing aids - Allows you to turn on
hearing aid compatibility.
83
Settings
Noise suppression - Suppress
background noise in call.
Voice Enhancement – You can set the
phone to enhance voice clarity in noisy
environments so you can hear more
clearly.
Power button ends call – Allows you
to end the call by pressing the Power/
Lock Key.
Call duration – View the duration of
calls including last call, all calls, outgoing
calls and incoming calls.
Sound settings - Allows you to control
the sounds on the phone.
Additional settings – Allows you to
change the following settings:
Call forwarding: Allows you to set
the call forwarding options.
Call waiting: If call waiting is
activated, the handset will notify you
of an incoming call while you are on
a call (depending on your network
provider).
Share & connect
Allows you to transfer data and media
with other devices.
84
NFC
NFC (Near Field Communication) is a
wireless technology that enables data
transmission between two objects when
they are brought within a few inches of
each others. When you enable NFC on
your phone, your phone can exchange
data with other NFC-enabled devices
or read information from smart tags
embedded in posters, stickers, and other
products.
To turn on NFC:
1 From the Home screen, tap the Menu
Key > All settings.
2 Tap Share & connect and tap the NFC
switch
.
Direct/Android Beam
When this feature is turned on, you can
beam app content to another NFC-capable
device by holding the devices close
together. For example, you can beam
Browser pages, YouTube videos, contacts,
and more. Just bring the devices together
(typically back to back) and then touch
your screen. The app determines what
gets beamed.
Settings
To activate Direct/Android Beam:
From the Home screen, tap the Menu
Key > All settings > Share &
connect > Direct/Android Beam .
%
NOTE
•
You must enable NFC to activate Direct/
Android Beam.
SmartShare Beam
Allows you to receive multimedia content
from LG phones or tablets.
To activate SmartShare Beam:
From the Home screen, tap the Menu
> All settings > Share &
Key
connect > SmartShare Beam. Then tap
the switch to activate SmartShare
Beam and set the desired options.
%
NOTE
•
You must enable Wi-Fi to activate
SmartShare Beam.
Miracast
You can mirror phone screen and sound
onto LG Miracast dongle or TV wirelessly.
1 From the Home screen, tap the Menu
Key > All settings.
2 Tap the Networks tab.
3 Tap Share & connect > Miracast.
4 Tap the switch
feature.
5 Turn on the Miracast feature on your TV
or connect to the LG Miracast dongle.
%
TIP
•
To start the Miracast feature quickly, tap
the Miracast icon in the Notifications
Panel. While mirroring, Mobile Hotspot
cannot be used simultaneously.
to turn on the
Wireless storage
To manage files on your phone in the
computer or copy files to the phone from
the computer without a USB connection.
1 Make sure that the phone and computer
are connected to the same network.
to activate Wireless storage.
2 Ta p
3 Enter the URL shown on your phone in
the address bar of the browser on your
computer.
Tethering & networks
Allows you to configure mobile networks,
tethering, and VPNs (Basic VPN, LG VPN).
Mobile Hotspot
You can also use your smartphone to
provide a mobile broadband connection
85
Settings
for up to 8 other devices. Create a hotspot
and share your connection. To create a
portable hotspot, from the Home screen,
tap the Menu Key > All settings >
Networks tab > Tethering & networks
> Mobile Hotspot. Then tap the Mobile Hotspot switch
feature. Tap Set upMobile Hotspot to
change the SSID, password, security type,
and other hotspot options.
%
NOTE
•
Mobile Hotspots requires an appropriate
DataPro data plan. Devices connected to
your Mobile Hotspot use data from your
DataPro plan. Plans are not unlimited
and significant charges may be
incurred if the included data allowance
is exceeded. Performance may vary
depending on the number of devices
connected and other factors. If you do
not use a password, others will be able
to use your Mobile Hotspot connection.
to activate the
Bluetooth tethering
Bluetooth tethering allows you to connect
other devices to your phone via Bluetooth.
To share your connection via Bluetooth
tethering:
86
From the Home screen, tap the Menu
> All settings > Networks tab
Key
> Tethering & networks. Then tap the
Bluetooth tethering switch to turn
the function on.
%
NOTE
•
Bluetooth tethering can be activated
only when your smartphone is
connected to the AT&T network.
Help
Tap to view help information about the
Mobile Hotspot and Bluetooth tethering
functions.
Mobile networks
You can set whether to enable or disable
data access on your phone.
Data enabled - Select whether to enable
or disable data access.
International data roaming - Select
whether to enable or disable data access
while international roaming.
Access point names - You can select
the access point name, add a new APN, or
reset to default.
Network operators - Allows you to
select a network operator (if necessary).
Settings
Search for AT&T MicroCell - You can
search and register an AT&T MicroCell in
order to use it.
VPN
From your phone, you can add, set up, and
manage virtual private networks (VPNs)
that allow you to connect and access
resources inside a secured local network,
such as your corporate network.
Prepare Your Device for VPN
Connection
Depending on the type of VPN you are
using at work, you may be required to
enter your login credentials or install
security certificates before you can
connect to your company's local network.
You can get this information from your
network administrator. Before you can
initiate a VPN connection, you must set
the screen lock option (Pattern, PIN, or
Password only).
Add a Basic VPN Connection
The Basic VPN menu allows you to use
the built-in Android VPN client supporting
basic features.
1 From the Home screen, tap the Menu
Key
> All settings.
2 Select the Networks tab.
ethering & networks > VPN >
3 Tap T
Basic VPN > Add Basic VPN profile.
%
NOTE
•
You must change your screen lock
before you use credential storage. You
can set a pattern, PIN, or password.
4 Enter the VPN network according to the
security details you have obtained from
your network administrator.
5 When finished, tap Save.
Add a LG VPN Connection
The LG VPN menu allows you to use the
advanced LG VPN client supporting full
IPSec features and interoperability.
1 From the Home screen, tap the Menu
Key > All settings.
2 Select the Networks tab.
ethering & networks > VPN >
3 Tap T
LG VPN > Add LG VPN network.
%
NOTE
•
You must set the local key store
password before you use LG VPN
credential storage.
87
Settings
4 Enter the VPN network according to the
security details you have obtained from
your network administrator.
5 When finished, tap Save.
Sound tab
Sound profile
Allows you to set the sound profile to
Sound, Vibrate only, or Silent.
Volumes
Adjust the phone's volume settings to suit
your needs and your environment.
Vibrate strength
Allows you to set the vibrate strength for
calls, notifications, and touch feedback.
Quiet mode
Tap the switch to enable this
function. Tap Quiet mode to open a
screen to set the days and times to
automatically turn off all sounds except
for alarms and media and to set allowed
calls during the quiet mode.
88
Phone ringtone
Select the ringtone for incoming calls.
Smart ringtone
Select to automatically increase the
volume of the ringtone when outside
noise is loud.
Incoming call vibration
Allows you to choose the type of vibration
for incoming calls.
Gentle vibration
Gradually increases vibration up to the
current strength set.
Ringtone with vibration
Checkmark for vibration feedback for calls.
Voice notifications
Read out incoming call and message
event automatically.
Default notification sound
Select the ringtone for notifications such
as new messages receipt or calendar
events.
Settings
Touch feedback & system
Allows you to set dial pad touch tones,
touch sounds, screen lock sound, and
vibrate on touch.
Dial pad touch tones
Allows you to play tones when using the
dial pad.
Touch sounds
Allows you to play a sound when making
a screen selection.
Screen lock sound
Allows you to play a sound when locking
and unlocking the screen
Vibrate on touch
Allows you to vibrate when tapping the
front key and on certain UI interactions.
Display tab
Home screen
Select Home - Sets the home style for your device. Choose Home or EasyHome.
Theme - Sets the screen theme for your device. Choose Flex or LG.
Wallpaper - Allows you to set the Home
screen wallpaper.
Screen swipe effect - Choose the
desired type of effect to display when you
swipe from one Home screen canvas to
the next.
Allow Home screen looping - Allows
you to select the type of effect to display
when you swipe from one Home screen
canvas to the next.
Portrait view only - Select to display the
Home screen always in portrait view.
Home backup & restore - Select
to backup and restore app/widget
configurations.
Help - Touch to get information on using
the Home screen of your device.
Lock screen
Select screen lock - Select the desired
option to secure your phone from the
below.
None - No lock screen.
Swipe - Swipe any part of the screen
to unlock screen.
Face Unlock - Unlocks the screen
through facial recognition. Follow the
prompts. You are asked to select Pattern
and/or PIN as a backup.
89
Settings
Pattern - Allows you to set a pattern as
your screen lock. It's recommended that
you enter a backup PIN as well in case
you forget the pattern.
PIN - Enter a numeric PIN to unlock
the screen.
Password - Enter a password to unlock
the screen.
Swing Lock screen - If this option
is checked, you can enjoy seeing the
wallpaper on the lock screen pan vertically
in the direction you tilt the phone.
Screen swipe effect - Select the screen
effect you want to use when unlocking
the screen.
Weather animation - Show weather
animation for current location or primary
city set in the Weather app.
Wallpaper - Select the wallpaper to
display for your lock screen.
Shortcuts - Customize shortcuts on the
lock screen.
1 From the Home screen, tap the Menu
Key > All settings > Display tab, then tap the Lock screen > Shortcuts.
2 Select the app you want to add as a
shortcut on the Lock screen.
90
Owner info - Display the owner info on
the lock screen. Tap
information.
Lock timer - Allows you to set the
amount of time before the screen
automatically locks after the screen has
timed-out.
Power button instantly locks Checkmark to instantly lock the screen
when the Power/Lock Key
pressed.
to set the desired
is
Front touch buttons
Configure the front touch buttons options.
Button combination - Select the desired
front touch button combination.
Color - Select the color of the front touch
buttons.
Transparent background - Select to
use a transparent background on the front
touch buttons area.
Swipe front touch buttons - If you
checkmark this option, you can adjust
the area of the front touch buttons for
one-handed operation by swiping the front
touch buttons area to the left or right
Hide front touch buttons - Checkmark
each app to set the front touch buttons
Settings
hidden when the app is launched.
Brightness
Adjust the screen brightness by using the
slider. Tap Auto to set the brightness to
automatically change.
Screen timeout
Set the time delay before the screen
automatically turns off.
Screen-off effect
Set the screen off effect used when the
screen turns off.
Auto-rotate screen
Set to switch orientation automatically
when you rotate the phone.
Screen mode
Select the desired screen mode between
Standard, Vivid, and Natural.
Daydream
Select the screensaver to display when
the phone is sleeping while docked and/
or charging.
Font type
Select the desired font type.
Font size
Select the desired font size.
Smart screen
Checkmark this option to keep screen on
when the phone detects your face looking
at the screen.
Smart video
Checkmark this option to pause videos
while playing automatically when the
phone detects you are not looking at the
screen.
Notification LED
Select which type of notifications to
display the front or back side LEDs for.
Auto-adjust screen tone
Checkmark this option to save battery
power by adjusting the screen brightness
automatically with analysis of image color.
91
Settings
Screen capture area
Allows you to adjust the area captured by
a screen shot. Choose between Capture full screen and Capture part of screen.
%
TIP
•
Press and hold the Volume Down Key
and the Power Key at the
same time to capture the screen.
Aspect ratio correction
Change the resolution size of downloaded
applications to fit the screen size.
General tab
Gestures
Screen on/off - You can set the phone
to turn the screen on by quickly doubletapping the screen. Tap an empty area in
the Home screen, Status Bar, and Lock
screen to turn the screen off.
%
NOTE
•
This feature is also available when
using the QuickWindow case.
92
Answer an incoming call - During an
incoming call, bring the phone to your ear
to accept the incoming call.
%
NOTE
•
If the proximity sensor is covered by
something, the device might perform an
incorrect action.
Fade out ringtone - During an incoming
call, pick up the phone from the flat
surface to fade out the ringtone.
%
NOTE
•
If the proximity sensor is covered by
something, the device might perform an
incorrect action.
Silence incoming calls - Flip the device
to silence incoming calls.
Snooze or turn off alarm - Flip the
device to snooze or stop the alarm.
Pause video - Flip the device to pause
Settings
the video.
Move Home screen items - Touch and
hold an item and tilt the device to move it
to other Home screen panels.
Help - Touch to get information on using
the Gesture functions of your device.
Motion sensor calibration - Improve
the accuracy of the tilt and speed of the
sensor.
One-handed operation
Allows you to adjust the position of the
dial keypad, LG keyboard, or lock screen to
the left or right side of the screen to easily
use it with one hand.
Dial keypad - Checkmark to adjust the
position of the dial keypad.
LG keyboard - Checkmark to adjust the
position of the LG keyboard.
Gesture control - Allows you to swipe
the keyboard to the left or right to adjust
the position of the LG keyboard.
Lock screen - Checkmark to adjust the
position of the the PIN entry.
Swipe front touch buttons - Checkmark
to swipe the front touch buttons left or
right to adjust the position of the buttons.
Help - Displays help information for each
available option.
Storage
You can monitor the used and available
internal memory in the device.
Battery
See how much battery power is used for
device activities. The battery level displays in
a percentage. The remaining time of use is
also displayed.
-
Battery percentage on status bar
the battery percentage on the Status Bar.
Battery saver
Tap the switch to turn this feature
on or off. Tap Battery saver for the
following options.
Turn Battery saver on: Select the
level at which you want to turn on the
Battery saver function.
Auto-sync: Turns off Auto-sync.
Wi-Fi: Turns off Wi-Fi if data is not
in use.
Bluetooth: Turns off Bluetooth if it's
not connected to a device.
Vibrate on touch: Turns off touch
Displays
93
Settings
feedback.
Brightness: Adjusts the brightness.
Auto-adjust screen tone: Turns on
auto-adjust screen tone.
Screen timeout: Adjusts the screen
timeout.
Notification LED: Turns off the
notification LED.
Help - Touch to access some tips for the
Battery saver function.
Apps
You use the Apps settings menu to view
details about the applications installed on
your phone, manage their data, or force
them to stop. Tap the DOWNLOADED, RUNNING or ALL tabs to view
information about your installed apps.
Multitasking
This menu allows you to enable various
useful features for multitasking.
Checkmark each feature to enable it.
Tap Help to view help information for
multitasking features.
Accounts & sync
Use the Accounts & sync settings menu
94
to add, remove, and manage your Google
and other supported accounts. You also
use these settings to control how and
whether all applications send, receive,
and sync data on their own schedules and
whether all applications can synchronize
user data automatically. Gmail
Calendar, and other applications may also
have their own settings to control how
they synchronize data; see the sections on
those applications for details. Touch Add account to add new account.
TM
,
Guest mode
Use Guest mode when you let someone
else use your phone. They will only be
able to use the applications that you’ve
selected. Once you set it up, you can
easily put your phone in Guest mode by
drawing the guest pattern on the Lock
screen that you set, which is different
from your normal unlock pattern.
%
NOTE
•
To use Guest mode, set the Lock screen
to pattern lock. Guest can also use
apps not pre-selected but linked to preselected apps.
Settings
Location access
Use the Location access menu to set your
preferences for using and sharing your
location when you search for information
and use location-based applications, such
as Maps. Tap the switch
the location sources.
GPS satellites - Checkmark to enable
your phone’s standalone global positioning
system (GPS) satellite receiver to pinpoint
your location to within an accuracy as
close as several meters (“street level”).
Actual GPS accuracy depends on a clear
view of the sky and other factors.
Wi-Fi & mobile network location Allows apps to use Google’s location
service to estimate your location faster.
Anonymous location data will be collected
and sent to Google.
to enable
Security
Use the Security menu to configure how
to help secure your phone and its data.
Encrypt phone - Allows you to encrypt
data on the phone for security. You will
be required to enter a PIN or password to
decrypt your phone each time you power
it on.
Set up SIM card lock - Allows you to
set if you want to require a PIN to use or,
if set, allows you to change the PIN.
Password typing visible - Checkmark to
briefly show each character of passwords
as you enter them so that you can see
what you enter.
Phone administrators - Add or remove
phone administrators.
Unknown sources - Allow installation of
non-Play Store applications.
Verify apps - Disallow or warn before
installation of apps that may cause harm.
Trusted credentials - Checkmark to
allow applications to access your phone’s
encrypted store of secure certificates and
related passwords and other credentials.
You use credential storage to establish
some types of VPN and Wi-Fi connections.
If you have not set a password for the
secure credential storage, this setting is
dimmed.
Install from storage - Touch to install a
secure certificate.
Clear credentials - Deletes all secure
certificates and related credentials
and erases the secure storage's own
95
Settings
password.
Language & input
Select the language for the text on your
phone and for configuring the on-screen
keyboard, including words that you’ve
added to its dictionary.
Language - Choose a language to use on
your phone.
Spelling correction - Allows spelling
correction when using the on-screen
keyboard.
Personal dictionary - Allows you to
view, edit, and add words to your personal
dictionary.
Default - Allows you to select the default
keyboard type.
Checkmark the keyboard you want to
use from Android keyboard (AOSP),
Google voice typing, and LG Keyboard.
to configure each keyboard’s
Tap
settings.
Voice Search - Touch to configure the
Voice Search settings.
Text-to-speech output - Touch to set the
preferred engine or general settings for
text-to-speech output.
96
Pointer speed - Adjust the pointer
speed.
Backup & reset
Backup my data - Back up app data,
Wi-Fi passwords, and other settings to
Google servers.
Backup account - Displays the account
that is currently being used to back up
information.
Automatic restore - When reinstalling
an app, restore backed up settings and
data.
LG Backup service - Backs up all
information on the device and restores it
in the event of data loss or replacement.
For more information, tap the Menu Key
> Help.
Factory data reset - Erases all data on
the phone, except as follows. In the event
of device failure or error, your device
may record in an error log information
about the device’s status at the time of
the error event. The information recorded
in the error log may include data about
application names and usage, cell phone
location and number, GPS status, memory
usage and other non-personal device
Settings
status information. This information is
stored on your phone, and can only be
accessed by LG if the phone is physically
returned to LG for repair and service The
error log information is used by LG only
to diagnose, repair, and improve LG’s
products and services.
Browser Bar
The Browser Bar at the bottom of the Browser
enhances your mobile browsing experience
with contextual recommendations, social
networking applications and browser utilities.
We've included some buttons to get you
started and have made it easy to add more
buttons, move or remove them. To display
the Browser Bar, touch and drag the
upwards.
%
TIP
•You must enable the Toolbar and Active
Browsers options to activate the Browser
Bar.
tab
Date & time
Set your preferences for how the date and
time is displayed.
Accessibility
Use the Accessibility settings to configure
any accessibility plug-ins you have
installed on your phone.
%
NOTE
Requires additional plug-ins to become
selectable.
TalkBack - Allows you to set up the
TalkBack function which assists people
with impaired vision by providing verbal
feedback. Tap the switch
right corner of the screen to turn it on. Tap
Settings at the bottom of the screen to
adjust the TalkBack settings.
Install web scripts - Allows you to
enable (or disable) installation of web
scripts.
Large text - Checkmark to increase the
size of the text.
Invert color - Sets the color contrast
for better screen viewing. Tap the switch
at the top right corner of the screen
to turn it on. Then tap the screen and
drag across the screen in any direction
until you see the color contrast you want
to use.
Magnification gestures - When this
feature is turned on, you can zoom in and
out by triple-tapping the screen.
the top
97
Settings
Shades - Set the screen to be shade of
black.
Mono audio - Checkmark to allow
headset sound to be routed to both the
right and left channel. To manually set the
audio route, move the slider on the mono
audio slide bar.
Touch & hold delay - Sets the touch and
hold delay (short, medium, or long).
Universal touch - Tap the switch
to toggle it On or off. On allows
you to replace the hardware keys with
a Universal touch board .Tap the
Universal touch icon to access the
Power, Home, Volume down, Volume
up, and Pinch buttons. Draw a "C" on
the board to automatically display the
Dial tab. Draw an "M" on the board to
automatically display the Messaging
application. Draw a "W" on the board
to automatically launch the Chrome
application.
Auto-rotate screen - Checkmark to
allow the device to rotate the screen
depnding on the device orientation
(portrait or landscape).
Speak passwords - Checkmark so
98
that you can say your log in passwords
(instead of typing your passwords).
Power button ends call - Checkmark so
that you can end voice calls by pressing
the Power/Lock Key. When this option
is enabled, pressing the Power/Lock Key
during a call does not lock the screen.
Easy access - Turning this feature on
allows you to activate an accessibility
feature by tapping the Home Key
three (3) times. Choose from Off, Show
all, TalkBack, Invert color, Universal
touch, and Accessibility settings.
Text-to-speech output - Text-to-speech
output provides audible readout of
text, for example, the contents of text
messages, and the Caller ID for incoming
calls.
PC connection
Select USB connection method -
Opens a dialog box to choose the default
connection mode when connecting your
phone to a PC via USB. Choose from
Charge phone, Media sync (MTP),
Tethering, PC software, or Send
images (PTP).
Settings
Tethering
You can use your phone to provide
a data connection to a computer
by activating data tethering and
connecting them with a USB cable.
To tether your phone with your
computer using the USB
1 Connect your phone to your computer
with a USB cable.
2 The USB connection type prompt is
displayed. T
%
NOTE
•
Data Tethering requires an appropriate
DataPro data plan. Devices connected
by tethering use data from your DataPro
plan. Plans are not unlimited and
significant charges may be incurred
if the included data allowance is
exceeded. Performance may vary
depending on the number of devices
connected and other factors.
Ask upon connecting - Checkmark to
have the phone ask you to choose which
USB connection mode it should connect
with to a PC.
Help - Touch to get information on the
different types of USB connections.
ap Tethering to confirm.
PC Suite - Allows you to use a Wi-Fi
connection to transfer music and images
between a computer and your phone.
Refer to page 103 for more information.
On-Screen Phone - Turns the On-Screen
Phone function on so that you can receive
Wi-Fi connection requests. Refer to page
101 for information about LG On-Screen
Phone.
Help - Displays help information for the
PC Suite and On-Screen Phone functions.
Accessory
QuickWindow case - Activate to make
features, such as music, weather, and
clock, available in small view when using
the QuickWindow case.
USB storage - Sets the Plug & Pop
feature for USB storage. Tap
enable this feature and automatically
display the app panel when connecting an
OTG (On-the-Go) USB cable. Checkmark
the applications you want to make
available.
Earphone - Sets the Plug & Pop feature
for earphones. Tap
feature and automatically display the
to
to enable this
99
Settings
app panel when connecting an earphone.
Checkmark the applications you want to
make available.
About phone
View legal information, check phone
status and software versions, and perform
a software update.
Regulatory and Safety Information
To view regulatory and safety
information, tap the Menu Key
from the Home screen, then
tap All settings > About phone >
Regulatory and Safety.
100
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.