LG CM200 User Manual

4-way Navigation Wireless Laser Mouse

User's Quick Guide

Latest Laser Technology for Excellent Detection and Movement!

4-way Navigation Wireless Laser Mouse

Federal Communications Commission (FCC) requirements, Part 15

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes of modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

This product complies with 21 CFR, Chapter 1, Sub-chapter J at the date of manufactured. This Class B digital apparatus meets all requirements of the Canadian interference-causing equipment regulations. Caution: Avoid direct or indirect (such as reflection) eye exposure to laser light! Keep out of the reach of children!

CE Declaration Of Conformity

Hereby, the manufacturer, declares that this 2.4GHz Wireless Laser Mouse is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Essential requirements - Article 3 Protection requirements for health and safety - Article 3.1a

--Testing for electric safety according to EN 60950 has been conducted. These are considered relevant and sufficient.

Protection requirements for electromagnetic compatibility -Article 3.1b

--Testing for electromagnetic compatibility according to EN 301 489-1, EN 301 489-17 and EN 55024 has been conducted. These are considered relevant and sufficient.

Effective use of the radio spectrum -Article 3.2

--Testing for radio test suites according to EN 300 328-2 has been conducted. These are considered relevant and sufficient.

Congratulations on your purchase of this Advanced 2.4GHz 4way Navigation Wireless Laser Mouse. Please carefully read the User's Quick Guide to learn about the installation and the powerful functions of your new Wireless Laser Mouse.

- 1 -

4-way Navigation Wireless Laser Mouse

USB Port

USB Version

Package Content

ü 4-way Navigation Laser Mouse ü 2.4GHz Dongle ü Battery: Alkaline AA * 2 ü User's Quick Guide

CAUTION:

- The batteries may explode or leak if they are improperly recharged, inserted,

disposed in fire or mixed with used or different battery types.

- Risk of explosion will be caused if battery is replaced by an incorrect type.

- Dispose of used batteries according to the instructions.

- It's important that batteries should be recycled in a proper way for green

environment.

Install Hardware

Note:

- If you are running Windows 98 and plug the connector into the computer, you

may find a pop-up window that requires to insert the Windows 98 CD-ROM. Please follow the window instruction to install the required driver or set the driver path as "Windows\system" or the other path that the driver located.

n Install Receiver

1) Turn on the computer.

2) Connect the USB dongle to the computer.

n Link Mouse with Receiver

Note:

- Please link the devices within the effective distance.

- The linkage period is 15 seconds. Once press the

dongle's Link Button, please complete the mouse linkage process within the linkage period.

- There is a power switch located at the back of mice for some models. Please

select "On" before linking the mouse with the dongle.

1) Place batteries into the mouse.

2) Press the ID Link Button on the receiver. There are 15 seconds for the mouse linkage.

3) Press the ID Link Button of the mouse.

4) The mouse is linked with the receiver.

5) The product designs with the unique Smart Link function. Once the linkage process is complete, you don't have to re-link the mouse even if you change batteries or restart the computer.

6) If the mouse does not link with the cradle, please repeat Step 2~3.

7) The 2.4GHz product features with 4 channels and there are 256 changeable IDs for each channel. If the selected channel or ID is interfered by other wirelessmouse users nearby, please change the Link ID by re-linkage the device

immediately. The channel and the ID will automatically change.

- 2 -

+ 5 hidden pages