LG CL65 User manual

OWNER’S MANUAL

MFL71101837

Mini Hi-Fi System

Please read this manual carefully before operating your set and retain it for future reference.

MODEL

CL65 (CL65, CLS65F)

2003_Rev02

www.lg.com

Getting Started2

Safety Information

Getting Started

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects lled with liquids, such as vases, should be placed on the apparatus.

WARNING: Do not install this equipment in a conned space such as a book case or similar unit.

CAUTION: Do not use high voltage products around this product. (ex. Electrical swatter) This product may malfunction due to electrical shock.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufcient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service center. Use of controls, adjustments or the performance of procedures other than those specied herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure.

CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.

NOTICE: For safety marking information including product identication and supply ratings, please refer to the main label on the bottom or the other surface of the product.

Getting Started 3

CAUTION concerning the Power Cord

The Power Plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible.

Check the specication page of this owner’s manual to be certain of the current requirements.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or re. Periodically examine the cord of your device, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the device, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.

CAUTION: Be careful to make sure children do not put their hands or any objects into the *speaker duct.

* speaker duct: A hole for plentiful bass sound on speaker cabinet (enclosure)

CAUTION: No naked ame sources, such as lighted candles, should be placed on the apparatus.

Symbols

Refers to alternating current(AC).

Refers to direct current(DC).

Refers to class II equipment.

Refers to stand-by.

Refers to “ON” (power).

Refers to dangerous voltage.

Getting Started

Table of Contents4

Table of Contents

1 Getting Started

2 Safety Information 6 Unique Features 7 Playable file Requirement 7 – Music file requirement 7 – Compatible USB Devices 7 – USB device requirement 8 Remote control 10 Front panel 12 Rear panel

2 Connecting

14 Connecting to speakers 14 – Attaching the speakers to the unit 14 – Attaching the speaker light cables to the

unit 15 Optional Equipment Connection 15 – AUX IN 1 Connection 15 – AUX IN 2 Connection 16 – USB Connection 16 – Antenna Connection

3 Operating

17 Basic Operations 17 – CD/USB Operations 17 – Auto Play 18 – Selecting a folder and an MP3/WMA file 19 – Deleting a file/folder or format

19 – AUTO DJ

20 Using BLUETOOTH® wireless technology 20 – Listening to music stored on the Bluetooth

devices 23 Using the LG XBOOM App 23 – About “LG XBOOM” App 23 – Install “LG XBOOM” App onto Your

Bluetooth Device 24 – Activate Bluetooth with “LG XBOOM” App 25 Radio Operations 25 – Listening to the radio 25 – Improving poor FM reception 25 – Presetting the Radio Stations 25 – Deleting all the saved stations 26 Sound adjustment 26 – Setting the sound mode 27 Advanced Operations 27 – Recording to USB 29 – JUKE BOX Playback

Table of Contents 5

30 Other Operations 30 – Turn off the sound temporarily 30 – CHILDSAFE Mode 30 – DEMO 30 – Resume stop 31 – Using Microphone 33 – LIGHTING 34 – Sleep Timer Setting 34 – Dimmer 35 – AUTO POWER On 35 – Auto function change 36 Setting the Clock 36 – Setting the Clock through “LG XBOOM” App 36 – Using your player as an alarm clock 37 LG Sound Sync 38 WIRELESS PARTY LINK Connection

4 Troubleshooting

39 Troubleshooting 39 – General 40 – NOTES to release Demo mode

5 Appendix

41 General specifications 42 Speakers specifications 42 Trademarks and Licenses 43 Maintenance 43 – Notes on Discs 43 – Handling the Unit

Getting Started6

Unique Features

BLUETOOTH®

Listens to music stored on your Bluetooth device.

Getting Started

AUTO DJ

Blends the end of one song into the beginning of another for seamless playback.

USB Direct Recording

Records music to your USB device.

LG XBOOM

LG XBOOM is an app designed to let you take control of some of LG’s latest audio devices. (Page 23-24)

LG Sound Sync

Controls volume level of this unit by the remote control of your LG TV that is compatible with LG Sound Sync.

Getting Started 7

Playable file Requirement

Music file requirement

MP3/WMA le compatibility with this unit is limited as follows.

y Sampling frequency: within 32 to 48 kHz (MP3),

within 32 to 48 kHz (WMA)

y Bit rate: within 32 to 320 kbps (MP3),

40 to 192 kbps (WMA)

y Maximum les: Data CD: 999 / USB: 2,000

y Maximum folders: Data CD: 99 / USB: 200

y File extensions: “.mp3”/ “.wma”

y Certain MP3/WMA les may not be played

depending on the type or format of the le.

y CD-ROM le format: ISO 9660/ JOLIET

y We recommend that you use Easy-CD Creator,

which creates an ISO 9660 le system.

y A protected le by DRM (Digital rights

management) cannot be played on the unit.

y The DTS disc is not supported.

You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live File System, you cannot use it on LG players.

(Mastered/Live File System: Disc format system for Windows Vista)

Compatible USB Devices

y MP3 Player: Flash type MP3 player.

y USB Flash Drive:

Devices that support USB2.0 or USB1.1.

y The USB function of this unit does not support all

USB devices.

USB device requirement

y Devices which require additional program

installation when you have connected it to a computer, are not supported.

y Do not extract the USB device while in operation.

y For a large capacity USB, it may take longer than a

few minute to be searched.

y To prevent data loss, back up all data.

y If you use a USB extension cable or USB hub, the

USB device is not recognized.

y Using NTFS le system is not supported. (Only

FAT(16/ 32) le system is supported.)

y This unit recognizes up to 2,000 les.

y External HDD, Card readers, Locked devices, or

hard type USB devices are not supported.

y USB port of the unit cannot be connected to PC.

The unit cannot be used as a storage device.

y Some USB may not work with this unit.

Getting Started

Getting Started8

(R03)

Remote control

Getting Started

Replacement of battery

• • • • • • • • • • • • • • a • • • • • • • • • • • • •

1 (Standby): Turns the power on or off. B (Open/Close): Opens and closes the disc tray.

VOL (Volume) +/-: Adjusts speaker volume.

F (Function): Selects the function and input source.

Input source / Function Display

Disc CD

USB USB 1 / USB 2

AUX (3.5 mm) input AUX 1 AUX input AUX 2

Bluetooth BT

LG Sound Sync (Wireless) LG TV

Radio FM

[(Mute): Mutes the sound. PRESET·FOLDER W/S:

- Chooses a preset number for a radio station. (Page 25)

- Searches for a folder of MP3/WMA les. When

a CD/USB containing MP3/WMA les in several folders is being played, press PRESET·FOLDER

W/S to select the folder you want to play.

JUKEBOX/MEMORY:

- Stores radio stations. (Page 25)

- Selects JUKE BOX mode. (Page 29)

- Makes JUKE BOX list.

AUTO DJ: Selects the AUTO DJ mode. (Page 19)

DELETE:

- Deletes MP3/WMA les. (USB only) (Page 19)

- Deletes a song on the JUKE BOX list.

- Deletes all the saved stations.

Remove the battery cover on the rear of the remote control, and insert the battery with 4 and 5 matched correctly.

Getting Started 9

• • • • • • • • • • • • • • b • • • • • • • • • • • • •

REPEAT: Listens to your tracks/les repeatedly or randomly.

TUNING-/+: Selects the radio stations. C/V (Skip/Search):

- Skips backward or forward.

- Searches for a section within a track/le.

N (Play/Pause):

- Starts or pauses playback.

- Selects stereo/mono.

Z (Stop):

- Stops playback.

- Cancels DELETE function.

EQUALIZER: Chooses sound impressions.

SPECIAL EQ: J (Information):

- Sees information about your music. An MP3 le often come with ID3 tag. The tag gives the Title, Artist, Album or Time information.

- Sees Bluetooth device name of the unit in BT READY.

- Sees the name of connected all Bluetooth device in Bluetooth mode.

- When these units are successfully connected each

other in WIRELESS PARTY LINK mode, each of connected device names appears in the each unit.

Chooses special equalizer.

• • • • • • • • • • • • • • c • • • • • • • • • • • • •

0 to 9 numerical buttons: Selects numbered tracks, les, or preset number.

CLOCK: Sets a clock and checks a time.

ALARM: With the ALARM function you can turn on

CD, USB play and tuner reception at a desired time.

• • • • • • • • • • • • • • d • • • • • • • • • • • • •

VOICE CANCELLER: You can reduce the vocal tones during music playback from various input sources.

SLEEP: Sets the system to turn off automatically at a specified time. (Dimmer: The display window will be darkened by half.)

SET: Conrms the setting. KEY CHANGER (L/l): Changes the key to suit your

vocal range.

MIC (Microphone) ECHO: Selects ECHO mode.

?: This button is not available.

VOCAL EFFECTS: Selects various vocal effects

mode.

USB REC:

- Records to USB.

- Stops Recording.

Getting Started

Front panel

Getting Started

Getting Started10

b c d e f

a USB 1 Port

You can play sound files by connecting the USB

device.

b 1 (Standby)

Turns the power on or off.

c Display window d

(Remote sensor)

e 3 TWIN

Connects two speakers for TWIN mode in

WIRELESS PARTY LINK.

f USB 2 Port

You can play sound files by connecting the USB

device.

g VOLUME

- Adjusts speaker volume.

- Adjusts microphone volume.

h MIC VOL (Microphone volume)

Selects microphone volume mode.

MIC (Microphone) ECHO

Selects ECHO mode.

VOICE CANCELLER

You can reduce the vocal tones during music

playback from various input sources.

VOCAL EFFECTS

Selects various vocal effects mode.

hijklmn

i F (Function)

Selects the function and input source.

Input source / Function Display

Disc CD

USB USB 1 / USB 2

AUX (3.5 mm) input AUX 1

AUX input AUX 2

Bluetooth BT

LG Sound Sync (Wireless) LG TV

Radio FM

N (Play/Pause)

- Starts or pauses playback.

- Selects stereo/mono.

V (Skip/Search)

- Skips forward.

- Searches for a section within a track/file.

- Selects the radio stations.

KEY CHANGER (L/l)

Changes the key to suit your vocal range.

Getting Started 11

j Disc tray k USB REC / DEMO

- Records to USB.

- Stops Recording.

- In power off status, if you press USB REC /

DEMO, show DEMO mode.

Z (Stop)

Stops playback or cancels DELETE function.

C (Skip/Search)

- Skips backward.

- Searches for a section within a track/le.

- Selects the radio stations.

B (Open/Close)

Opens and closes the disc tray.

AUTO DJ

Selects the AUTO DJ mode.

l LIGHTING

Selects the lighting mode.

SPECIAL EQ / BASS BLAST (or BASS BLAST+)

- Chooses special equalizer.

- Press and hold to select BASS (or BASS+) effect

directly.

Moves to folder or file in selection mode.

Selects a folder when searching a file.

m MIC (Microphone) jack n AUX IN 1 jack o EQUALIZER / SEARCH & MULTI

- Chooses sound impressions.

- Searches a folder or a le.

- Selects the lighting effects.

Getting Started

Getting Started12

Rear panel

Getting Started

a Power cord b SPEAKERS terminals c SPEAKER LIGHTING SYSTEM

Connect the speaker lighting cables.

d AUX IN 2 (L/R)

Connect an auxiliary device.

e ANTENNA (FM)

100 100

b c d e

Useful functions for using the unit

Function Description To do Do this

BT Lock On/Off

(Page 22)

Auto Power On

(Page 35)

It allows you to connect a Bluetooth device only on BT (Bluetooth) and LG TV functions.

Initial setting of this function was set to off.

It allows the unit to turn on automatically by input signals:

BT (Bluetooth) or LG TV

OFF

Press and hold N for 5 seconds in BT (Bluetooth) function.

Turn off the unit by pressing 1 on the unit for 5 seconds.

Getting Started 13

Getting Started

Connecting14

Connecting to speakers

Attaching the speakers to the unit

To connect the cable to the unit, press each plastic nger pad to open the connection terminals on the unit. Insert the wire and release the nger pad.

Connect the black of each wire to the terminals

Connecting

marked - (minus) and the other end to the terminals marked + (plus).

Attaching the speaker light cables to the unit

To connect the speaker light cable to the unit, insert the cable to SPEAKER LIGHTING SYSTEM connectors on the unit.

Caution

y When you connect the speakers to the unit,

make sure to connect the speaker’s cable and plug to the corresponding speaker connector.

y Check the volume level before playing music

to prevent inrm, child, and pregnant women from being shocked by the sudden and loud sound from the unit.

y Do not use the unit in a limited space.

It may damage a person’s hearing. It is recommended to use it in a wide space.

y Use the speaker supplied with this unit

only. Using any other speaker may cause malfunction.

y The speakers contain magnet parts, so color

irregularity may occur on the TV screen or PC monitor screen. Please use the speakers far away from either TV screen or PC monitor.

y Avoid looking at the speaker lights for a long

time. It may cause damage to eyesight.

Caution

y Make sure that the jacks and the speakers

are matched correctly.

y Make sure to connect the cables to

connectors tightly on the unit.

+ 30 hidden pages