LG BD630 User Manual

OWNER’S MANUAL

Network Blu-ray Disc™ Player

Please read this manual carefully before operating your set and retain it for future reference.

BD630

www.lg.com

BD651-N.BUSALLK_ENG_0496.indd 1 8/31/11 2:39 PM

BD651-N.BUSALLK_ENG_0496.indd 2 8/31/11 2:39 PM

1 Getting Started

Safety Information

Getting Started 3

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK) NO

USER-SERVICEABLE PARTS INSIDE REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous

enclosure that may be of sucient magnitude to constitute a risk of electric shock to persons.

instructions in the literature accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING: Do not install this equipment in a conned space such as a book case or similar unit.

CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.

voltage within the product’s

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing)

CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service center. Use of controls, adjustments or the performance of procedures other than those specied herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit;

That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specication page of this owner’s manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or re. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.

Getting Started

BD651-N.BUSALLK_ENG_0496.indd 3 8/31/11 2:39 PM

Getting Started4

This device is equipped with a portable battery or accumulator.

Safety way to remove the battery or the battery from the equipment: Remove the

old battery or battery pack, follow the steps

Getting Started

in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators. The battery shall not be exposed to excessive heat such as sunshine, re or the like.

CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects lled with liquids, such as vases, shall be placed on the apparatus.

FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

yReorient or relocate the receiving antenna.

yIncrease the separation between the equipment

and receiver.

yConnect the equipment into an outlet on a

circuit dierent from that to which the receiver is connected.

yConsult the dealer or an experienced radio/TV

technician for help.

CAUTION: Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

BD651-N.BUSALLK_ENG_0496.indd 4 8/31/11 2:39 PM

Getting Started 5

Notes on Copyrights

yBecause AACS (Advanced Access Content

System) is approved as content protection system for Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analogue signal output, etc., of AACS protected contents. The operation of this product and restrictions on this product may vary depending on your time of purchase as those restrictions may be adopted and/or changed by AACS after the production of this product.

yFurthermore, BD-ROM Mark and BD+ are

additionally used as content protection systems for Blu-ray Disc format, which imposes certain restrictions including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain additional information on AACS, BDROM Mark, BD+, or this product, please contact an authorized Customer Service Center.

yMany BD-ROM/DVD discs are encoded with

copy protection. Because of this, you should only connect your player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected discs.

yThis product incorporates copyright protection

technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi. Reverse engineering or disassembly is prohibited.

yUnder the U.S. Copyright laws and Copyright

laws of other countries, unauthorized recording, use, display, distribution, or revision of television programs, videotapes, BD-ROM discs, DVDs, CDs and other materials may subject you to civil and/ or criminal liability.

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specied by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tipover.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Getting Started

BD651-N.BUSALLK_ENG_0496.indd 5 8/31/11 2:39 PM

Table of Contents6

Table of Contents

1 Getting Started

3 Safety Information 8 Introduction 8 – Playable Discs and symbols used in

this manual

9 – About the “7” Symbol Display 9 – Supplied Accessorries 10 – File compatibility 11 – AVCHD (Advanced Video Codec High

Deﬁnition) 12 – Certain System Requirements 12 – About Digital Multi-channel sound 12 – Compatibility Notes 12 – Regional Code 13 Remote control 14 Front panel 14 Rear panel

2 Connecting

15 Connecting to Your TV 15 – HDMI Connection 16 – What is SIMPLINK? 16 – Component Video Connection 17 – Video/Audio (Left/Right) Connection 17 – Resolution Setting 18 Connecting to an Ampliﬁer 18 – Connecting to an Ampliﬁer via HDMI

Output 18 – Connecting to an Ampliﬁer via Digital

Audio Output 19 – Connecting to an Ampliﬁer via 2

Channel Audio Output 19 Connecting to your Home Network 19 – Wired network connection 20 – Wired Network Setup 22 USB device connection 22 – Playback content in the USB device

3 System Setting

23 Settings 23 – Adjust the Setup Settings 23 – [DISPLAY] Menu 24 – [LANGUAGE] Menu 25 – [AUDIO] Menu 26 – [LOCK] Menu 27 – [NETWORK] Menu 28 – [OTHERS] Menu

4 Operating

29 General Playback 29 – Using [HOME] menu 29 – Playing a Disc 29 – Playing a ﬁle on a disc/USB device 30 – Enjoying BD-Live 30 – Basic operations for video and audio

content 31 – Basic operations for photo content 31 – Using the disc menu 31 – Resume playback 32 Advanced Playback 32 – Repeat Playback 32 – Repeating a speciﬁc portion 32 – Enlarge the playback image 33 – Marker Search 33 – Using the search menu 34 – Changing content list view 34 – Viewing content information 34 – Selecting a subtitle ﬁle 35 – Last Scene Memory 35 – Options while viewing a photo 36 – Listening to music while slide show 36 On-Screen display 36 – Displaying content information on-

screen 37 – Playing from selected time 37 – Hearing a different audio 37 – Selecting a subtitle language 37 – Watching from a different angle 38 – Changing the TV Aspect Ratio 38 – Changing the Picture Mode 38 – Changing subtitle code page 39 Audio CD Recording

BD651-N.BUSALLK_ENG_0496.indd 6 8/31/11 2:39 PM

40 Enjoying the NetCast™ Entertainment

Access

Table of Contents 7

5 Troubleshooting

41 Troubleshooting 41 – General 42 – Picture 42 – Sound 43 – Network 43 – Customer Support 43 – Open source software notice

6 Appendix

44 Controlling a TV with the Supplied

Remote Control

44 – Setting up the remote to control your

TV 45 Network Software Update 45 – Network update notiﬁcation 45 – Software Update 47 Area Code List 48 Language Code List 49 Trademarks and Licenses 50 Audio Output Speciﬁcations 52 Video Output Resolution 53 Speciﬁcations 54 Maintenance 54 – Handling the Unit 54 – Notes on Discs 55 Important Information Relating to

Network Services

7 Warranty

56 Limited Warranty

BD651-N.BUSALLK_ENG_0496.indd 7 8/31/11 2:39 PM

Getting Started8

Introduction

Playable Discs and symbols used in this manual

Getting Started

Media/Term Logo Symbol Description

yDiscs such as movies that can be purchased or

rented.

yBD-R/RE discs that are recorded in BDAV format.

yBD-R/RE discs that contain Movie, Music or

Photo les.

yISO 9660+JOLIET, UDF and UDF Bridge format.

yDiscs such as movies that can be purchased or

rented.

yVideo mode and nalized only

ySupports the dual layer disc also

Finalized AVCHD format

yDVD±R/RW discs that contain Movie, Music or

Photo les.

yISO 9660+JOLIET, UDF and UDF Bridge format.

Blu-ray

DVD-ROM

DVD-R

DVD-RW

DVD+R

DVD+RW

(8 cm / 12

cm disc)

y u i

DVD-RW

(VR)

(8 cm / 12

cm disc)

Audio CD

(8 cm / 12

cm disc)

CD-R/RW

(8 cm / 12

cm disc)

Note –

Caution –

BD651-N.BUSALLK_ENG_0496.indd 8 8/31/11 2:40 PM

y u i

VR mode and nalized only

Audio CD

yCD-R/RW discs that contain Movie, Music or

Photo les.

yISO 9660+JOLIET, UDF and UDF Bridge format.

Indicates special notes and operating features.

Indicates cautions for preventing possible damages from abuse.

Note

yDepending on the conditions of the

recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.

yDepending on the recording software & the

nalization, some recorded discs (CD-R/RW, DVD±R/RW, BD-R/RE) may not be playable.

yBD-R/RE, DVD±R/RW and CD-R/RW discs

recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens.

yIf you record a disc using a personal

computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.)

yThis player requires discs and recordings to

meet certain technical standards in order to achieve optimal playback quality.

yPre-recorded DVDs are automatically set to

these standards. There are many dierent types of recordable disc formats (including CD-R containing MP3 or WMA les) and these require certain pre-existing conditions to ensure compatible playback.

yCustomers should note that permission

is required in order to download MP3 / WMA les and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.

yYou have to set the disc format option

to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live System, you cannot use it on LG player. (Mastered/Live File System : Disc format system for windows Vista)

Getting Started 9

About the “7” Symbol Display

“7” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specic media.

Supplied Accessorries

Audio / Video Cable (1) Remote control (1)

Battery (1)

Getting Started

BD651-N.BUSALLK_ENG_0496.indd 9 8/31/11 2:40 PM

Getting Started10

File compatibility

Video ﬁles

Getting Started

File

Location

Disc,

USB

Music ﬁles

File

Extension

“.avi”, “.mpg”, “.mpeg”, “.mkv ”, “.mp4”, “.asf”

Codec Format Audio Format Subtitle

XVID, MPEG1 SS, H.264/MPEG-4 AVC, MPEG2 PS, MPEG2 TS

Dolby Digital, DTS, MP3, WMA, AAC, AC3

SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), VobSub (.sub), SubViewer 1.0 (.sub), SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD Subtitle System (.txt)

File

Location

Disc, USB,

Photo ﬁles

File

Location

Disc, USB,

File

Extension

“.mp3”, “.wma”, “.wav”, “.m4a” (DRM free)

File

Extension

“.jpg”, “.jpeg”, “.png”, “.gif ”

Sampling Frequency Bitrate Note

within 32 - 48 kHz (WMA),

within 11 - 48 kHz (MP3)

Recommanded

Size

Less than 4,000 x 3,000 x 24 bit/pixel Less than 3,000 x 3,000 x 32 bit/pixel

within 32 - 192 kbps (WMA),

within 8 - 320 kbps (MP3),

Progressive and lossless compression photo image les are not supported.

Some wav les are not supported on this player.

Note

BD651-N.BUSALLK_ENG_0496.indd 10 8/31/11 2:40 PM

Note

yThe le name is limited to 180 characters.

yA “avi “le which is encoded “ WMV 9 codec”

is not supported.

yDepending on the size and number of the

les, it may take several minutes to read the contents on the media.

yThis unit cannot support the ID3 Tag

embedded MP3 le.

yThe total playback time of music le

indicated on the screen may not correct for VBR les.

yHD video les contained on the CD or USB

1.0/1.1 may not played properly. Blu-ray disc, DVD or USB 2.0 are recommended to play back HD video les.

yThis player supports H.264/MPEG-4 AVC

prole Main, High at Level 4.1. For a le with higher level, the warning message will appear on the screen.

yThis player does not support les that are

recorded with GMC

*1 GMC – Global Motion Compensation

*2 Qpel – Quarter pixel

yThis player supports UTF-8 les even it

contains Unicode subtitle contents. This player can not support the pure Unicode subtitle les.

yDepending on the types of le or ways of

recording, it may not play back.

yA disc which was recorded by multi-session

on normal PC is not supported on this player.

yTo be playback a movie le, movie le name

and Subtitle le name must be the same.

yIf video codec is MPEG2 TS or MPEG2 PS,

subtitle does not play back.

or Qpel

Getting Started 11

AVCHD (Advanced Video Codec High Deﬁnition)

yThis player can playback AVCHD format discs.

These discs are normally recorded and used in camcorders.

yThe AVCHD format is a high denition digital

video camera format.

yThe MPEG-4 AVC/H.264 format is capable of

compressing images at higher eciency than that of the conventional image compressing format.

yThis player can playback AVCHD discs using

“x.v.Color” format.

ySome AVCHD format discs may not play

depending on the recording condition.

yAVCHD format discs need to be nalized.

y“x.v.Color” oers a wider color range than normal

DVD camcorder discs.

Getting Started

BD651-N.BUSALLK_ENG_0496.indd 11 8/31/11 2:40 PM

Getting Started12

Certain System Requirements

For high denition video playback:

yHigh denition display that has HDMI input jacks.

yBD-ROM disc with high denition content.

Getting Started

yHDMI or HDCP capable DVI input on your display

device is required for some content (as specied by disc authors).

For Dolby® Digital Plus, Dolby TrueHD and DTS-HD multi-channel audio playback:

yAn amplier/receiver with a built-in (Dolby

Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD) decoder.

yMain, center, surround speakers and subwoofer

as necessary for chosen format.

About Digital Multi-channel sound

A digital multi-channel connection provides the best sound quality. For this, you need a multichannel Audio/Video Receiver that supports one or more of the audio formats supported by your player. Check the logos on the front of the Audio/ Video receiver and the manual. (PCM Stereo, PCM Multi-Ch, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS and/or DTS-HD)

Compatibility Notes

yBecause BD-ROM is a new format, certain disc,

digital connection and other compatibility issues are possible. If you experience compatibility problems, please contact an authorized Customer Service Center.

yThis unit allows you to enjoy functions such

as picture-in-picture, secondary audio and Virtual packages, etc., with BD-ROM supporting BONUSVIEW (BD-ROM version 2 Prole 1 version

1.1/ Final Standard Prole). Secondary video and audio can be played from a disc compatible with the picture-in-picture function. For the playback method, refer to the instructions in the disc.

yViewing high-denition content and up-

converting standard DVD content may require a HDMI-capable input or HDCP-capable DVI input on your display device.

ySome BD-ROM and DVD discs may restrict the

use of some operation commands or features.

yDolby TrueHD, Dolby Digital Plus and DTS-HD are

supported with maximum 7.1 channels if you use HDMI connection for the audio output of the unit.

yYou can use a USB device to store some disc

related information, including downloaded online content. The disc you are using will control how long this information is retained.

Regional Code

This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD discs labeled same as the rear of the unit or “ALL”.

BD651-N.BUSALLK_ENG_0496.indd 12 8/31/11 2:40 PM

Remote control

Getting Started 13

Battery Installation

Remove the battery cover on the rear of the Remote Control, and insert a R03 (size AAA) battery with 4 and 5 matched correctly.

• • • • • • a • • • • • •

(POWER): Switches the player

ON or OFF.

(OPEN/CLOSE): Opens and

closes the disc tray.

* : The button is not available for any function.

TV Control Buttons: See page 44.

0-9 numerical buttons: Selects

numbered options in a menu or inputs letters in the keypad menu.

CLEAR: Removes a mark on the search menu or a number when setting the password.

REPEAT (h): Repeats a desired section or sequence.

• • • • • • b • • • • •

c/v

backward or forward.

C/V

next or previous chapter / track / le.

Z z M

• • • • • • c • • • • •

HOME (n): Displays or exits the [Home Menu].

DISC MENU: Accesses menu on a disc.

Direction buttons: Selects an option in the menu.

ENTER (b): Acknowledges menu selection.

BACK(x): Exits the menu or resumes playback. The resume play function may not work depending on the BD-ROM disc.

INFO/DISPLAY (m): Displays or exits On-Screen Display.

(SCAN): Searches

(SKIP): Goes to the

(STOP): Stops playback.

(PLAY): Starts playback.

(PAUSE): Pauses playback.

• • • • • • d • • • • •

ZOOM: Displays or exits the [Zoom] menu.

MARKER: Marks any point during playback.

SEARCH: Displays or exits the search menu.

TITLE/POP-UP: Displays the DVD title menu or BD-ROM’s pop-up menu, if available.

Colored (R, G, Y, B) buttons: Use to navigate BD-ROM menus. They are also used for [MOVIE], [PHOTO], [MUSIC] and [NetCast].

Getting Started

BD651-N.BUSALLK_ENG_0496.indd 13 8/31/11 2:40 PM

Getting Started14

Front panel

Getting Started

Disc Tray

Display Window

Remote Sensor

(OPEN/CLOSE)

d B

Rear panel

AC power cord

VIDEO OUT

2CH AUDIO OUT (Left/Right)

COMPONENT VIDEO OUT (Y P

B PR

(PLAY / PAUSE)

e N

(STOP)

f Z

(POWER) Button

g 1

USB Port

HDMI OUT

DIGITAL AUDIO OUT (COAXIAL)

LAN port

)

BD651-N.BUSALLK_ENG_0496.indd 14 8/31/11 2:40 PM

2 Connecting

Connecting 15

Connecting to Your TV

Make one of the following connections, depending on the capabilities of your existing equipment.

yHDMI connection (page 15)

yComponent Video connection (page 16)

yVideo connection (page 17)

Note

yDepending on your TV and other

equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described in this manual.

yPlease refer to the manuals of your TV,

Stereo System or other devices as necessary to make the best connections.

yDo not connect the player’s AUDIO OUT

jack to the phono in jack (record player) of your audio system.

yDo not connect your player via your VCR.

The image could be distorted by the copy protection system.

HDMI Connection

If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, High Speed HDMI the player to the HDMI jack on a HDMI compatible TV or monitor.

Set the TV’s source to HDMI (refer to TV’s Owner’s manual).

Cable). Connect the HDMI jack on

Rear of the unit

HDMI

cable

Connecting

Additional Information for HDMI

yWhen you connect a HDMI or DVI compatible

device make sure of the following:

-Try switching o the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player.

-The connected device’s video input is set correctly for this unit.

-The connected device is compatible with 720x480p, 1280x720p, 1920x1080i or 1920x1080p video input.

yNot all HDCP-compatible HDMI or DVI devices

will work with this player.

-The picture will not be displayed properly with non-HDCP device.

-This player does not playback and TV screen is changed to black screen.

BD651-N.BUSALLK_ENG_0496.indd 15 8/31/11 2:40 PM

Connecting

Note

yIf a connected HDMI device does not accept

the audio output of the player, the HDMI device’s audio sound may be distorted or may not output.

yWhen you use HDMI connection, you can

change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 17.)

ySelect the type of video output from the

Connecting

HDMI OUT jack using [HDMI Color Setting] option on the [Setup] menu (see page 24).

yChanging the resolution when the

connection has already been established may result in malfunctions. To solve the problem, turn o the player and then turn it on again.

yWhen the HDMI connection with HDCP

is not veried, TV screen is changed to black screen. In this case, check the HDMI connection, or disconnect the HDMI cable.

yIf there are noises or lines on the screen,

please check the HDMI cable (length is generally limited to 4.5 m(15 ft.)).

What is SIMPLINK?

Some functions of this unit are controlled by the TV’s remote control when this unit and LG TV’s with SIMPLINK are connected through HDMI connection.

Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop, Power O, etc.

Refer to the TV owner’s manual for the details of SIMPLINK function.

LG TV’s with SIMPLINK function has the logo as shown above.

Note

Depending on the disc type or playing status, some SIMPLINK operation may dier from your purpose or not work.

Component Video Connection

Connect the COMPONENT VIDEO OUT jacks on the player to the corresponding input jacks on the TV using component video cable. Connect the left and right AUDIO OUT jacks of the player to the audio left and right IN jacks on the TV using the audio cables.

Rear of the unit

Component

video cable

Audio cable

Note

When you use COMPONENT VIDEO OUT connection, you can change the resolution for the output. (Refer to “Resolution setting” on page 17.)

BD651-N.BUSALLK_ENG_0496.indd 16 8/31/11 2:40 PM

Connecting 17

Video/Audio (Left/Right) Connection

Connect the VIDEO OUT jack on the player to the video in jack on the TV using a video cable. Connect the left and right AUDIO OUT jacks of the player to the audio left and right IN jacks on the TV using the audio cables.

Rear of the unit

Audio/ Video cable

Resolution Setting

The player provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu.

1. Press HOME (n).

2. Use (b). The [Setup] menu appears.

3. Use

4. Use press ENTER (b) to move to the third level.

5. Use press ENTER (b) to conrm your selection.

yIf your TV does not accept the resolution

ySince several factors aect the resolution of

yWhen you set the HDMI Resolution, over

to select the [Setup] and press ENTER

a/d

to select [DISPLAY] option then press

w/s

to move to the second level.

to select the [Resolution] option then

w/s

to select the desired resolution then

w/s

Note

you have set on the player, you can set resolution to 480p as follows:

1. Press B to open the disc tray.

2. Press Z (STOP) for more than 5 seconds.

video output, see “Video Output Resolution” on page 52.

720p is not outputted to Composit Video.

Connecting

BD651-N.BUSALLK_ENG_0496.indd 17 8/31/11 2:40 PM

Connecting18

Connecting to an Ampliﬁer

Make one of the following connections, depending on the capabilities of your existing equipment.

yHDMI Audio connection (page 18)

yDigital Audio connection (page 18)

y2CH Analog Audio connection (page 19)

Connecting

Since many factors aect the type of audio output, see “Audio Output Specications” for details (pages

50).

Connecting to an Ampliﬁer via HDMI Output

Connect the player’s HDMI OUT jack to the corresponding in jack on your amplier using a HDMI cable.

Rear of the unit

Connect the amplier’s HDMI output jack to HDMI input jack on your TV using a HDMI cable if your amplier has HDMI output jack.

You will need to activate the player’s digital output. (See “[AUDIO] Menu” on pages 25.)

Connecting to an Ampliﬁer via Digital Audio Output

Connect the player’s DIGITAL AUDIO OUT jack to the corresponding in jack (COAXIAL) on your amplier using an optional digital audio cable.

Rear of the unit

Coaxial cable

HDMI cable

Receiver/Amplier

You will need to activate the player’s digital output.

BD651-N.BUSALLK_ENG_0496.indd 18 8/31/11 2:40 PM

HDMI cable

(See “[AUDIO] Menu” on pages 25.)

Receiver/Amplier

+ 40 hidden pages