LG BD6070 User Manual

BD6070 UserGuide

LG-BD6070

User Guide

CDMA PHONE

1

BD6070 UserGuide

Contents

Chapter 1. Getting Started

Cautions

Phone Overview

On screen Icons

Chapter 2. Basic Functions

Turning the phone On and Off

Making a Call

Correcting Dialing Mistakes

Receiving Calls

Dialing Call from Phonebook

One Touch Dialing

Two Touch Dialing

Chapter 3. Menu Features

General Guidelines to MENU Access and Settings Menu Structures

Appendix

Installation

RF Exposure Statement

2

BD6070 UserGuide

Chapter 1. Getting Started

Cautions

??Using the phone in proximity to receiving equipment (i.e., TV or radio) may cause interference.

??Keep your phone in a safe place when not in use.

??Only use the batteries, antennas, and chargers provided by LG. Using the wrong accessories could void your warranty.

??Only authorized personnel should service the phone and its accessories. Faulty installation or service may result in accidents and consequently invalidate the warranty.

??Do not hold the antenna while the phone is in use.

??Do not use the phone in designated “no cellular phone use” areas.

??Do not expose the phone to high temperature or humidity.

??Avoid getting your phone wet. If the phone gets wet, turn the power off immediately and remove the battery pack. If the phone is mal-functional, return it to the dealer for service.

??Avoid shock or impact on the phone.

Phone Overview

	Function	Key Descriptions
	LCD screen	Displays messages & indicator icons.
	END/PWR	Used to turn power on/off. This key disconnects a call. Using this key, you can also exit out of
		a menu back to the phone’s standby display without changing the setting.
	SEND	Allows user to place or answer calls.
	Mouse Key	This mouse key allows quick access to text and voice mail notification messages. calendar,
	(Navigation Key)	and sound profiles.
	Cellcase	Close the active cellcase to the terminate a call in progress.
		Open the active cellcase to answer an incoming call.
	Soft Keys	The current operation of a soft key is defined by the word at the bottom of the display.
	Side Keys	These keys enable you to adjust keybeep volume (in standby mode) and earpiece volume (in a
		call status).
	[#],[*] key	- In the standby status, set the manner mode by pressing the button[*]. (for 2 seconds)
		- In the standby status, set the lock function by pressing the button[#]. (for 2 seconds)
	Alphanumeric	These keys enable you to enter numbers and characters and choose menu items.
	Keypad
	Clear Key	In the standby status, show the My Menu by pressing the buton[Clr].

On screen Icons

The phone screen displays several onscreen icons and onscreen icons appears when the phone is power on.

Icons	Descriptions

3

BD6070 UserGuide

Displays the strength of the signal received by the phone and current signal strength is indicated as the number of bars displayed on the screen.

No service

The phone is not receiving a system signal.

In use

A call is in progress.

No icon indicates the phone is in standby mode.

Digital indicator

Digital service is available. ( ‘X’indicator : 1X(95C) service is available.)

Analog indicator

Analog service is unavailable

Indicates that a text message or voice mail has been received

(Press UP mouse key In ths standby status to show the message status.)

Roaming

The phone is outside of its home service area.

Charge level

Indicates battery charge level.

4

BD6070 UserGuide

Chapter 2. Basic Functions

Turning the Phone On and Off

<Turning the Phone On>

1.Install a charged battery pack or connect the phone to an external power source such as the cigarette lighter adapter or car kit.

2.Press [END/PWR] for a few seconds until the red light on the top of the phone flashes.

??Fully extend the antenna for the best performance.

<Note> Like any other radio device, avoid any unnecessary contact with the antenna while your phone is on.

<Turning the Phone Off>

1.Press and hold until display screen will be turned off, and then release the key.

2.Protect the antenna by pushing it back into the phone, if extended.

Making a Call

When you make a call, follow these simple steps:

1.Make sure the phone is turned on.

??If not, press [END/PWR].

2.Enter the phone number with area code, if needed.

3.Press [SEND].

??If the phone is locked, enter the lock code.

??“Call Failed” indicates that the call did not go through.

4.Press [END/PWR] to disconnect the call.

Correcting Dialing Mistakes

If you make mistakes in dialing a number, press [CLR] key once to erase the last entered digit or hold down [CLR] for at least two second to delete all digits, or simply press soft key 2 [BACK] to exit dialing state.

Receiving Calls

1.When the phone rings, open cellcase or If cellcase is open, press any key (except [END/PWR]) to answer.

??If you press the Side UP key for 2seconds, the present call is rejected. (In case Call Reject ([Menu] +[6]+[3]+[4]) : Activate )

2.Press [END/PWR] to disconnect the call.

In call waiting mode, the present call is on hold as you answer another incoming call.

This service is provided by your service provider.

When the call waiting function is activated, your phone will beep to let you know if you have an

5